Data sheet Item number: 7674.30.00 Grease separators for free-standing installation ▶ Grease separator – partial disposal Lipator – manual operation Product information for the product group ACO Product benefits ■ Can be emptied without interruption to service ■ Ideally suited to installations without di- rect access for drainage vehicles ■ Ideal for use in connection with wet waste disposal plants ■ Enables targeted disposal ■ Reduction of disposal costs by separate draw-off of grease and sludge. ■ Fresh grease separator plant as per DI■ ■ ■ ■ ■ ■ With ball valve DN 50 for grease and N EN 1825 and DIN 4040‑100 For installation in frost-free environment With integrated sludge trap Housing and lower section made of stainless steel, material grade 304 Heating cartridge and additional heat insulation to homogenise grease □ 230 V/1.5 kW Connections for inlet and outlet as per DIN EN 877 ■ ■ ■ ■ ■ Hand membrane pump to increase pres- sludge draw-off Tank for grease- and sediment sludge □ Contents: 60 l Cover includes hose attachment 2 replacement drums with covers □ Contents: 60 l Agitating device with 1-phase alternating current motor in lower housing □ 230 V/90 kW sure for grease draw-off ■ Electrical connection □ 230 V □ 50/60 Hz □ 1.6 kW ■ System ACO Passavant □ Building Supervisory Authority approval Z‑54.1‑452 Item Technical Data 7674.30.00 Nominal capacity NS 4 Nominal width DN 100 Total content Largest component Weight Diameter x Height Heaviest single component Empty Full [l] [mm] [kg] [kg] [kg] 945 1,380 x 800 70 375 1,320 Note: Also available in stainless steel, material grade 316 on request. Note: Version for wet refuse disposal installations on request. ACO eServices on the Internet: http://catalogue.aco-buildingdrainage.com Excluding errors and changes. Infobox Item number: 7674.30.00 Version: 14.08.2014 Page 1 of 3 Data sheet Item number: 7674.30.00 Grease separators for free-standing installation ▶ Grease separator – partial disposal Dimensions Nominal capacity Dimensions NS 4 L L1 L2 L3 H H1 H2 [mm] [mm] [mm] [mm] [mm] [mm] [mm] 2,150 1,380 550 900 2,050 1,600 1,450 Accessories Description Used with Sampling pipe DN 100 ■ Grease separator Lipurex/Lipurat/Lipator/Lipatomat □ NS 1 – 4 ■ Starch separator Fapurat □ NS 0.5 – 1 ■ Light oil separator Coalisator-R/RD □ NS 3 Description Item number ■ Stainless steel, material grade ■ ■ ■ ■ ■ ■ 7300.09.10 316 Round shape Gradient drop: 70 mm For installation in DN 100 horizontal pipes coming from grease separator With EC connector and claw Connections tested to DIN EN 877 Weight: 13 kg Note: Also available in stainless steel, material grade 316 on request. Note: Version for wet refuse disposal installations on request. ACO eServices on the Internet: http://catalogue.aco-buildingdrainage.com Excluding errors and changes. Infobox Item number: 7674.30.00 Version: 14.08.2014 Page 2 of 3 Data sheet Item number: 7674.30.00 Grease separators for free-standing installation ▶ Grease separator – partial disposal Description Used with Sampling pipe DN 100 ■ Grease separator Lipurex/Lipurat/Lipator/Lipatomat □ NS 1 – 4 ■ Starch separator Fapurat □ NS 0.5 – 1 ■ Light oil separator Coalisator-R/RD □ NS 3 Description ■ Stainless steel, material grade ■ ■ ■ ■ ■ Coarse trap DN 100 Item number 7300.10.20 316 Round shape For installation in DN 100 vertical pipes coming from grease separator With EC connector and claw Connections tested to DIN EN 877 Weight: 13 kg ■ Grease separator Lipurex/Lipu- ■ Stainless steel, material grade rat/Lipator/Lipatomat □ NS 1 – 4 ■ Starch separator Fapurat □ NS 0.5 – 1 ■ Round shape ■ Gradient drop: 70 mm 7300.09.70 316 ■ For installation in DN 100 vertical pipes going to grease separator ■ With EC connector and claw ■ Connections tested to DI- N EN 877 ■ Weight: 15 kg Replacement drum ■ Grease separators □ Lipator/Lipatomat 7600.00.15 ■ Drum □ Volume: 60 l ■ With lid and tension ring ■ Height: approx. 630 mm ■ Diameter: approx. 380 mm ■ Weight: 5 kg You can find further accessories under ➔ http://catalogue.aco-buildingdrainage.com/acc/76743000 Note: Also available in stainless steel, material grade 316 on request. Note: Version for wet refuse disposal installations on request. ACO eServices on the Internet: http://catalogue.aco-buildingdrainage.com Excluding errors and changes. Infobox Item number: 7674.30.00 Version: 14.08.2014 Page 3 of 3