Operating Manual
VisionPRO TH8000 Series
®
Touchscreen Programmable Thermostat
69-1894EFS-03
BE CAREFUL! Never use sharp instruments, such as a pencil
or pen, to press touchscreen keys. To prevent damage to the
thermostat, always press keys with your fingertip.
This manual covers the following models
ENGLISH
M29343
TH8110U: For 1 Heat/1 Cool systems
TH8320U: For up to 3 Heat/2 Cool systems
TH8321U: For up to 3 Heat/2 Cool systems with dehumidification
(Pull thermostat from wallplate and turn over to find model number)
This thermostat contains a Lithium battery which may contain Perchlorate material.
Perchlorate Material—special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Need Help?
For assistance with this product please visit http://yourhome.honeywell.com
or call Honeywell Customer Care toll-free at 1-800-468-1502
Read and save these instructions.
69-1894EFS—03
® U.S. Registered Trademark.
US Patent No. 6595430, D509151 and other patents pending.
Copyright © 2011 Honeywell International Inc. All rights reserved.
VisionPRO TH8000 Series
®
Table of contents
About your new thermostat
Appendices
Battery replacement............................ 20
Advanced functions ............................ 21
In case of difficulty .............................. 26
Optional remote sensors .................... 28
Limited warranty.................................. 29
Programming & Operation
Clock setting.......................................... 6
Fan setting ............................................. 7
System setting....................................... 8
Using program schedules ..................... 9
Program schedule overrides .............. 12
Vacation hold ....................................... 14
Special features................................... 15
Screen lock .......................................... 16
Screen cleaning ................................... 17
Humidity display & control.................. 18
This thermostat is ready to go!
Your new thermostat is preprogrammed and ready to go.
See page 3 to check settings.
CAUTION: EQUIPMENT DAMAGE
HAZARD. To prevent possible
compressor damage, do not operate cooling system when outdoor
8)14)6%896)-7&)03;¶±Å
©²±Åª¯
1
69-1894EFS—03
ENGLISH
Thermostat features .............................. 2
Programming at a glance ..................... 3
Quick reference to controls .................. 4
Quick reference to status display ........ 5
Operating Manual
About your new thermostat
Congratulations! You’ve just purchased the world’s most advanced, easy-to-use thermostat. It has been designed to give you many years of reliable service and touchscreen climate control.
ENGLISH
Features
W ¸®(%=463+6%17',)(90)71%<-1->)'31*368%2()'3231=¯
W 61',%-6463+6%11-2+»97849008,)61378%8*6318,);%00837)87',)(90)7¯
W 2)6+=®7%:-2+7)88-2+7*361%<-191'3787%:-2+7¯
W 2)®839',8)14'3286303:)66-()7463+6%17',)(90)%8%2=8-1)¯
W 6)'-7)'31*368'328630/))478)14)6%896);-8,-2²l
3*8,)0):)0=397)8¯
W ,%2+)°',)'/6)1-2()670)8=39/23;;,)2837)6:-')366)40%')*-08)67
batteries and other critical components.
W %6+)839',7'6))2(-740%=;-8,&%'/0-+,8-7)%7=836)%(Ê):)2-28,)(%6/¯
W )0)'813()07(-740%=%2('3286307911)6,91-(-8=¯
W )0)'813()07%''3113(%8)348-32%0398(33636-2(3366)138)7)27367¯
69-1894EFS—03
2
VisionPRO TH8000 Series
®
About
This
thermostat
your new thermostat
is ready to go!
3962);8,)61378%8-746)®463+6%11)(%2(6)%(=83+3¯9787)88,)8-1)%2((%=¯
,)2',)'/8,)7)88-2+7&)03;%2(',%2+)-*2))()(»
1. Set clock........................................................................................................See page 6
2. Select fan setting: Preset to Auto ..............................................................See page 7
4. Program schedules: Preset to energy-saving levels
while you’re at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm) .......................................................................See pages 10-13
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,
and manually adjust the temperature (see pages 12-14).
3
69-1894EFS—03
ENGLISH
3. Select system setting: Preset to Heat ......................................................See page 8
Operating Manual
Quick reference to controls
Press day(s) to set program schedule (see page 11)
Press to select fan
operation (see page 7)
MON
ENGLISH
FAN
Press to select system
type (see page 8)
Press to set program
schedule (see page 11)
TUE
WED
THU
FRI
SAT
SUN
OK TO PICK MULTIPLE DAYS
AUTO
SYSTEM
70
Inside
Set To
70
Following
Schedule
Press for more options
(select models only)
HEAT
6:01
SCHED
Press to adjust
temperature settings
(see pages 11-14)
AM
HOLD
CLOCK
SCREEN
MORE
M29344
Press to override
program schedule
(see pages 12-14)
69-1894EFS—03
Press to set clock
(see page 6)
4
Press to lock keypad for 30
seconds to clean screen
(see page 17)
VisionPRO TH8000 Series
®
Quick reference to status display
Current inside temperature
Current day of week
Temperature setting
WED
FAN
AUTO
SYSTEM
System setting
Current time
70
Inside
Set To
70
Program schedule on
(does not display
when off)
Following
Schedule
Recovery
HEAT
6:01
SCHED
AM
HOLD
CLOCK
SCREEN
MORE
M29345
Adaptive Intelligent
Recovery in effect
(see page 15)
Other display messages:
W Cool On: Cooling system is activated
W Heat On: Heating system is activated
W Aux Heat On:9<-0-%6=,)%8-2+7=78)1-7%'8-:%8)(
5
69-1894EFS—03
ENGLISH
Fan setting
Operating Manual
Clock setting
Press CLOCK
6:01
ENGLISH
SCHED
To set the current time display, press CLOCK,
then press Vor Wto adjust the time. Press
and hold Vor Wto advance the time more
quickly.
AM
HOLD
CLOCK
SCREEN
MORE
M29346
Adjust time, then press DONE
6:02
Note: The real-time clock should never require
adjustment since it automatically updates for
daylight savings time, and stores all date/time
information.
AM
DONE
Press DONE837%:)§)<-8©3646)77CANCEL to
)<-8;-8,398',%2+-2+8,)8-1)ª¯
Note: To change the current week day display, see
page 22.
CANCEL
M29347
69-1894EFS—03
6
VisionPRO TH8000 Series
®
Fan setting
Press FAN to select fan operation, then press
DONE.
WED
FAN
AUTO
Set To
70
W On: Fan is always on.
W Auto: Fan runs only when the heating or
cooling system is on.
Following
Schedule
W Circ: Fan runs randomly, about 35% of the
time, not counting any run time with the
heating or cooling system.
HEAT
6:01
SCHED
AM
HOLD
CLOCK
SCREEN
MORE
M29348
Press FAN
Note: If a fan schedule is programmed,
“Auto” will run the fan schedule.
You can press FAN to override the fan settings
you’ve programmed for different time periods
(see page 11). If you select On or Circ, the
setting you select will remain active until you
press FAN again to select Auto (see page 27
for more information).
7
69-1894EFS—03
ENGLISH
SYSTEM
70
Inside
Operating Manual
System setting
Press the SYSTEM button to select, then press
DONE.
WED
FAN
AUTO
ENGLISH
SYSTEM
70
Inside
70
W Heat: Thermostat controls only the
heating system.
Following
Schedule
W Cool: Thermostat controls only the
cooling system.
Set To
HEAT
6:01
SCHED
AM
HOLD
W Off: Heating and cooling systems are off.
CLOCK
SCREEN
MORE
M29349
W Auto: Thermostat automatically selects
heating or cooling depending on the
indoor temperature.**
W Em Heat (only for heat pumps with
%9<-0-%6=,)%8ª»,)61378%8'3286307
1)6+)2'=%2(9<-0-%6=)%8¯
Compressor is locked out.**
** Select models only
69-1894EFS—03
8
VisionPRO TH8000 Series
®
Save money by setting program schedules
8¨7)%7=83463+6%1=3967=78)1*361%<-191)2)6+=7%:-2+7¯39'%2463+6%1*396
time periods each day, with different settings for weekdays and weekends.
Set to the time you awaken and the temperature you want
during the morning, until you leave for the day.
LEAVE
¹»±±%1
Set to the time you leave home and the temperature you
want while you are away (usually an energy-saving level).
RETURN
·»±±41
Set to the time you return home and the temperature you
want during the evening, until bedtime.
SLEEP
²±»±±41
Set to the time you go to bed and the temperature you want
overnight (usually an energy-saving level).
l
l
l
l
9
69-1894EFS—03
ENGLISH
WAKE
·»±±%1
Operating Manual
Energy-saving settings for maximum cost savings
This thermostat is pre-set with energy-saving program settings. We recommend these
7)88-2+77-2')8,)='%26)(9')=396,)%8-2+°'330-2+)<4)27)7&=%719',%7´´¦¯
©))2)<84%+)83%(.9788-1)7%2(8)14)6%896)73*)%',8-1)4)6-3(¯ª
ENGLISH
Wake
©·»±±%1ª
Leave
©¹»±±%1ª
Return
©·»±±41ª
Sleep
©²±»±±41ª
69-1894EFS—03
Heat (Mon-Fri)
Cool (Mon-Fri)
Heat (Sat-Sun)
Cool (Sat-Sun)
l
l
l
l
l
l
[Or cancel period]
[Or cancel period]
l
l
l
l
l
[Or cancel period]
l
l
l
l
[Or cancel period]
l
10
VisionPRO TH8000 Series
®
To adjust program schedules
Press SCHED
SCHED
HOLD
CLOCK
SCREEN
MORE
M29350
Press EDIT
EDIT
WAKE
LEAVE
RETURN
SLEEP
CANCEL
M29351
Select day(s)
MON
TUE
Set heat/cool levels
WED
THU
FRI
SAT
SUN
OK TO PICK MULTIPLE DAYS
FAN
70
AUTO
HEAT
CANCEL
PERIOD
6:00
DONE
WAKE
78
AM
LEAVE
Set time for program
period to start
RETURN
SLEEP
Note: You can press CANCEL PERIOD to eliminate any
unwanted time period.
COOL
Note: Press FAN to customize fan settings for any
time period (see page 7).
CANCEL
M29352
11
69-1894EFS—03
ENGLISH
DONE
1. Press SCHED, then EDIT.
2. Press day buttons (MON-SUN) to select
day(s).
3. Press Vor Wto set Wake time for selected
day(s).
4. Press Vor Wto set Heat and Cool
temperature for this time period.
5. Press other time periods (LEAVE, RETURN,
SLEEP) to set time and temperatures for
each.
6. Press DONE837%:)§)<-8©3646)77CANCEL
83)<-8;-8,3987%:-2+',%2+)7ª¯
Operating Manual
Program schedule override (temporary)
Adjust temperature
WED
FAN
ENGLISH
AUTO
SYSTEM
HEAT
70
Inside
Set To
The new temperature will be maintained only
928-08,)8-1)=397)8¯,)28,)8-1)6)<4-6)7
the program schedule will resume and set the
temperature to the level you’ve programmed
for the current time period.
73
Heat On
Hold Temperature
Until
8:00
SCHED
AM
HOLD
CLOCK
SCREEN
Press Vor Wto immediately adjust the temperature. This will temporarily override the
temperature setting for the current time period.
MORE
CANCEL
M29353
To cancel the temporary setting at any time,
press CANCEL (or SCHED). The program schedule
will resume.
Press to set timer
Press CANCEL (or SCHED) to
resume program schedule
69-1894EFS—03
12
VisionPRO TH8000 Series
®
Program schedule override (permanent)
Press HOLD
Adjust temperature
WED
FAN
SYSTEM
70
Inside
Set To
Whatever temperature you set will be
maintained 24 hours a day until you manually
change it or press CANCEL (or SCHED) to cancel
“Hold” and resume the program schedule.
73
Heat On
HEAT
8:00
AM
Permanent
Hold
SCHED
HOLD
CLOCK
SCREEN
MORE
CANCEL
M29354
Press CANCEL (or SCHED) to
resume program schedule
13
69-1894EFS—03
ENGLISH
AUTO
Press HOLD to permanently adjust the
temperature. This will turn off the program
schedule.
Operating Manual
Vacation hold
This feature can suspend the program sched90)*36)<8)2()(4)6-3(73*8-1)¯
1. Set temperature
FAN
AUTO
ENGLISH
SYSTEM
HEAT
70
Inside
Set To
55
Press Vor W to set the temperature you want,
then press Vor W to set the time of day you
want the schedule to resume when you return.
Press HOLD twice, then press Vor W to select
the number of days.
Hold Temperature
Until
6:00
SCHED
AM
HOLD
CLOCK
SCREEN
MORE
CANCEL
M29355
2. Press to set time for
schedule to resume
3. Press HOLD twice
SYSTEM
HEAT
*=396)8962)%60-)68,%2)<4)'8)(46)77
CANCEL (or SCHED) to cancel “Hold” and resume
the program schedule.
Hold Temperature
Until
14
SCHED
HOLD
DAYS
CLOCK
Whatever temperature you set will be maintained 24 hours a day for the number of days
you select. After this number of days have
elapsed, the previously programmed schedule
will resume at the time you set.
SCREEN
MORE
CANCEL
M29356
4. Press to select number of days
69-1894EFS—03
14
VisionPRO TH8000 Series
®
Special features
Auto Changeover: When set to Auto, the thermostat automatically selects heating or
cooling depending on the indoor temperature.
Compressor Protection: This feature forces the compressor to wait a few minutes
before restarting, to prevent equipment damage. During the wait time, the message
“Wait” is displayed on screen.
15
69-1894EFS—03
ENGLISH
Adaptive Intelligent Recovery: This feature allows the thermostat to “learn” how
long the furnace and air conditioner take to reach programmed temperature settings,
738,)8)14)6%896)-76)%',)(%88,)8-1)=397)8¯
36)<%140)»)88,)%/)8-1)83
·%1%2(8,)8)14)6%896)83¸±l¯,),)%8;-00'31)32before 6 am, so the tempera896)-7¸±l&=8,)8-1)=39;%/)%8·¯,)1)77%+)L)'3:)6=Z-7(-740%=)(;,)28,)
system is activated before a scheduled time period.
Operating Manual
Screen lock
To prevent tampering, the screen can be partially or fully locked.
WED
SCREEN LOCKED
FAN
AUTO
ENGLISH
SYSTEM
70
Inside
Set To
70
When partially locked, the screen displays
SCREEN LOCKED for several seconds if a locked
key is pressed. To unlock the screen, press any
unlocked key while SCREEN LOCKED appears on
the screen.
Following
Schedule
HEAT
6:00
SCHED
PM
HOLD
CLOCK
SCREEN
MORE
M29357
When the screen is fully locked, no keys
function. To lock or unlock the screen, see
advanced function 0670 on page 25.
See advanced function
0670 (page 25) for
screen lock options
69-1894EFS—03
16
VisionPRO TH8000 Series
®
Screen cleaning
Press SCREEN
6:00
SCHED
Press SCREEN to lock the screen for cleaning.
The screen will remain locked for 30 seconds
so you can clean the screen without changing
any settings.
PM
HOLD
CLOCK
SCREEN
MORE
Screen lock timer (30 seconds)
30
After 30 seconds, press DONE to resume normal
operation, or press SCREEN again if you require
more time for cleaning.
Note: Do not spray any liquid directly on the
thermostat. Spray liquids onto a cloth, then use
the damp cloth to clean the screen. Use water or
household glass cleaner. Avoid abrasive cleansers.
OK TO
CLEAN
SCREEN
M29359
17
69-1894EFS—03
ENGLISH
M29358
Operating Manual
About your
Humidity
level
newdisplay
thermostat
(select models)
Select models can display the current indoor
humidity level.
WED
FAN
AUTO
70
Inside
Set To
70
ENGLISH
(If an optional outdoor sensor is installed,
the outdoor temperature is shown instead of
the humidity level. Press MORE to display the
humidity level.)
Following
Schedule
SYSTEM
HEAT
6:00
43
PM
Humidity
SCHED
HOLD
CLOCK
SCREEN
MORE
M29360
Indoor humidity level
69-1894EFS—03
18
VisionPRO TH8000 Series
®
About your new thermostat
Dehumidification
control (select models)
Press MORE until humidity is displayed
6:00
SCHED
Select models allow you to decrease summer
humidity.
PM
HOLD
CLOCK
SCREEN
MORE
Press MORE until the humidity screen is displayed, then press Vor W to set the desired
humidity level.
Inside
52
Press DONE837%:)%2()<-83646)77CANCEL to
)<-8;-8,3987%:-2+',%2+)7¯
Humidity
DEHUMIDIFIER
45
DONE
CANCEL
M29362
6)77837%:)§)<-8
19
69-1894EFS—03
ENGLISH
M29361
Press to set desired humidity
The thermostat monitors humidity. When
humidity increases, the thermostat runs the air
conditioner longer to reduce humidity (up to
´l
&)03;=396'330-2+8)14)6%896)7)88-2+ª¯
Operating Manual
About your
Battery
replacement
new thermostat
Batteries are optional (to provide backup
power) if your thermostat was wired to run on
AC power when installed.
Grasp thermostat and pull to remove
fom wallplate
ENGLISH
Install fresh batteries immediately when the
LO BATT warning begins flashing. The warning flashes about 30 days before batteries are
depleted.
M29363
:)2-*8,);%62-2+(3)7238%44)%6=39
should replace batteries once a year, or before
leaving home for more than a month.
M29364
Insert 3 fresh AAA alkaline batteries
69-1894EFS—03
20
VisionPRO TH8000 Series
®
About yourfunctions
Advanced
new thermostat
1. Press SYSTEM.
TUE
FAN
AUTO
SYSTEM
HEAT
6:01
AM
DONE
CANCEL
HEAT
6:01
SCHED
Function
AM
HOLD
M29365
3. Change settings as
required (see pages
22-25).
0120
Setting
20
DONE
M29366
4. Press DONE83)<-8§
save changes.
21
Press V/Wto
select function
Press V/Wto
change setting
69-1894EFS—03
ENGLISH
SYSTEM
70
Inside
2. Press and hold
blank center key
until the display
changes.
Operating Manual
About yourfunctions
Advanced
new thermostat
Year setting (first two digits)
Function
0120
48-327»
Press V/W83',%2+)8,)*-6788;3(-+-873*8,)=)%6»
ENGLISH
20 = Year 20<<
21 = Year 21<<
Year setting (second two digits)
Function
0130
48-327»
Press V/W83',%2+)8,)0%788;3(-+-873*8,)=)%6»
01 - 99 (i.e., 2001 - 2099)
Month setting
Function
0140
48-327»
Press V/W83',%2+)8,)'966)281328,»
1 - 12 ©-¯)¯%29%6=®)')1&)6ª
Date setting
Function
0150
48-327»
Press V/W83',%2+)8,)'966)28(%8)»
1 - 31
69-1894EFS—03
22
VisionPRO TH8000 Series
®
Advanced functions
Program schedule on/off
Function
0160
48-327»
Press V/W8389628,)463+6%17',)(90)32363**»
0
4
Program schedule is off. Thermostat is non-programmable.
Program schedule is on (7-day programmable).
ENGLISH
Temperature format (°F/°C)
Function
0320
48-327»
Press V/W837)88,)8)14)6%896)(-740%=*361%8»
0
1
Fahrenheit
Celsius
Daylight savings time on/off
Function
0330
48-327»
The thermostat is pre-programmed to automatically adjust to daylight savings time.
Press V/W837)0)'8%2348-32»
0 **»3%(.9781)28*36(%=0-+,87%:-2+78-1)
1 2»983®',%2+)83(%=0-+,87%:-2+78-1)©8,639+,³±±·%2(*36%6)%78,%8
do not use the new 2007 DST calendar)
2 2»983®',%2+)83(%=0-+,87%:-2+78-1)©³±±¸%2(&)=32(*36%6)%78,%8
use the new 2007 DST calendar)
23
69-1894EFS—03
Operating Manual
About yourfunctions
Advanced
new thermostat
Furnace filter change reminder
Function
0500
ENGLISH
48-327»
This feature displays an alert to remind you to change the furnace filter.
Press V/W837)88,)()7-6)(6)1-2()6-28)6:%0»
0
1
2
3
4
5
6
Off (no reminder to change furnace filter)
Reminder after 10-day run time (about 1 month)
Reminder after 30-day run time (about 3 months)
Reminder after 60-day run time (about 6 months)
Reminder after 90-day run time (about 9 months)
Reminder after 120-day run time (about 1 year)
Reminder after 365-day run time (about 3 years)
Note: Press RESET
to cancel the alert
Humidifier pad change reminder
Function
0510
48-327»
This feature displays an alert to remind you to change the humidifier pad.
Press V/W837)88,)()7-6)(-28)6:%0»
0 Off (no reminder to change humidifier pad)
Note: Press RESET
1 Reminder after 3 months
to cancel the alert
2 Reminder after 6 months
3 Reminder after 1 year
69-1894EFS—03
24
VisionPRO TH8000 Series
®
Advanced functions
UV lamp change reminder
Function
0520
48-327»
This feature displays an alert to remind you to change the ultraviolet lamp.
Press V/W837)88,)()7-6)(-28)6:%0»
Note: Press RESET
0 Off (no reminder to change UV lamp)
to cancel the alert
1 Reminder after 1 year
Function
0540
48-327»
Press V/W837)88,)291&)63*463+6%14)6-3(7»
2
4
Two program periods (Wake, Sleep)
Four program periods (Wake, Leave, Return, Sleep)
Clock format
Function
0640
48-327»
Press V/W837)88,)'03'/(-740%=*361%8»
12 ²³®,396'03'/©-¯)¯L´»´±41Zª
24 ³µ®,396'03'/©-¯)¯L²¶»´±Zª
Screen lock
Function
0670
48-327»
Press V/W83',337)%7'6))203'/7)88-2+©7))4%+)²·ª»
0
1
2
Screen is unlocked (fully functional)
00*92'8-32703'/)()<')488)14)6%896)'3286307%2(CANCEL key
Screen is fully locked
69-1894EFS—03
25
ENGLISH
Program schedule periods
Operating Manual
In case of difficulty
If you have difficulty with your thermostat, please try the following suggestions.
Most problems can be corrected quickly and easily.
W
W
W
W
No response to
key presses (or
temperature will
not change)
W ,)'/831%/)796)8,)8,)61378%8-723803'/)(©7))4%+)³¶ª¯
Backlight is dim
W *8,)61378%8-7&%88)6=43;)6)(1%/)796)*6)7,%0/%0-2)
batteries are correctly installed (see page 20).
W *8,)61378%8-743;)6)(%(-1(-740%=-72361%0¯,)&%'/0-+,8
remains on at a low level, and brightens when a key is pressed.
ENGLISH
Display is blank
69-1894EFS—03
,)'/'-6'9-8&6)%/)6%2(6)7)8-*2)')77%6=¯
%/)796)43;)67;-8',%8,)%8-2+§'330-2+7=78)1-732¯
%/)796)*962%')(336-7'037)(7)'96)0=¯
*8,)61378%8-7&%88)6=43;)6)(1%/)796)*6)7,%0/%0-2)
batteries are correctly installed (see page 20).
%/)796),)%8-2+%2('330-2+8)14)6%896)7%6)7)883%'')48%&0)6%2+)7»
W )%8»µ±l83º±l
©µ¯¶l83´³lª
W 330»¶±l83ººl
©²±l83´¸lª
26
VisionPRO TH8000 Series
®
In case of difficulty
W 6)77SYSTEM to set system to Heat. Make sure the temperature is set
higher than the Inside temperature.
Display shows
Fan Auto and On
or Auto and Circ
at the same time
W ,-7-72361%034)6%8-32¯983-2(-'%8)78,)8,)61378%8-7*3003;-2+8,)
programmed fan setting. If Auto and On is shown, the fan is scheduled
for “On” during this period (see page 7).
W 6)77SYSTEM to set system to Cool. Make sure the temperature is set
lower than the Inside temperature.
W ,)'/'-6'9-8&6)%/)6%2(6)7)8-*2)')77%6=¯
W %/)796)43;)67;-8',%8,)%8-2+§'330-2+7=78)1-732¯
W %/)796)*962%')(336-7'037)(7)'96)0=¯
W *L%-8Z-7(-740%=)(8,)'3146)77364638)'8-328-1)6-732¯%-8
5 minutes for the system to restart safely, without damaging the
compressor (see page 15).
27
69-1894EFS—03
ENGLISH
Heating or
cooling system
does not respond
Operating Manual
Optional remote sensors (select models)
If an outdoor sensor is installed, the current
outdoor temperature is displayed.
WED
FAN
AUTO
70
Inside
Set To
70
ENGLISH
If an indoor remote sensor is installed, the display shows the indoor temperature at the location of the sensor. (The internal sensor in the
thermostat is disabled.)
Following
Schedule
SYSTEM
Outside
HEAT
6:01
SCHED
43
AM
HOLD
CLOCK
SCREEN
If more than one indoor sensor is installed, the
display shows an average of temperature readings from all sensors.
MORE
M29367
Inside
temperature
Outside
temperature
69-1894EFS—03
28
VisionPRO TH8000 Series
®
5-year limited warranty
32)=;)00;%66%2878,-7463(9'8)<'09(-2+&%88)6=83&)*6))*631()*)'87-28,);36/1%27,-4361%8)6-%0792()62361%097)
and service, for a period of five (5) years from the date of purchase by the consumer. If at any time during the warranty period
the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
If the product is defective,
(i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it; or
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the
defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer.
32)=;)00¨7730)6)74327-&-0-8=7,%00&)836)4%-6366)40%')8,)463(9'8;-8,-28,)8)61778%8)(%&3:)¯

¯31)78%8)7(3238%003;8,))<'097-32360-1-8%8-323*-2'-()28%036'327)59)28-%0(%1%+)773
this limitation may not apply to you.
¯

®
¯31)78%8)7(3238%003;0-1-8%8-32732,3;032+%2
implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
If you have any questions concerning this warranty, please write Honeywell Customer Relations, 1985 Douglas Dr, Golden
Valley, MN 55422 or call 1-800-468-1502. In Canada, write Retail Products ON15-02H, Honeywell Limited/Honeywell Limitée, 35
Dynamic Drive, Toronto, Ontario M1V4Z9.
29
69-1894EFS—03
ENGLISH
(ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the determination whether the product should be
6)8962)(838,)*3003;-2+%((6)77»32)=;)00)896233(73'/µ²±®´¹·±²¹¹¶39+0%76¯¯30()2%00)=¶¶µ³³
or whether a replacement product can be sent to you.
Automation and Control Solutions
Honeywell International Inc.
Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North
35 Dynamic Drive
Golden Valley, MN 55422
Toronto, Ontario M1V 4Z9
,884»°°=396,31)¯,32)=;)00¯'31
® U.S. Registered Trademark.
© 2011 Honeywell International Inc.
US Patent No. 6595430, D509151; other patents pending
·º®²¹ºµ
Ê±´¯¯):¯±´®²²
Printed in U.S.A.