S1M Shore Power Tracker Manual. Smart1Marine pre-configures the system with a SIM Card installed.

S1MShorePowerTrackerManual.
Smart1Marine pre-configures the system with a SIM Card installed.
Plug the device into the power source you want to monitor. The device will automtaically
turn on and start monitoring the power source. The system will take a few minutes to
intitate when first turned on .
Check: for a quick green flash every three seconds to confirm the device is picking up a
GSM signal and is ready to send and recieve commands.
Check: for a quick blue flash every three seconds to confirm the device is picking up a GPS
signal.
To Test : disconnect power source and wait for a SMS alert to inform power disconnection.
re-connect power and wait for an SMS alert to inform power is reconnected.
Installing SIM Card.
Install SIM Card
Commands
To Locate send the command to mobile number of the device: 0000,A00
To add a Geo-Fence, send command: 0000,B05,1,LAT.6 digit,LONG.6 digit,0,1
Note: Latitude and Longitude data is available from sending 0000,A00 track on demand command
To turn on SMS alert: Power on Alarm (default on): send command
0000,B02,1,22
21. Add External Power on Alert – B02
SMS Set:
0000,B02,P,22
Description:
P: 1 to 3 (code relates to master phone numbers)
Example
SMS Tx:
0000,B02,1,22
SMS Rx:
353358017784062,B02,OK
To turn on SMS alert: Power off Alarm (default on): send command
0000,B02,1,23
22. Add External Power off Alert – B02
SMS Set:
0000,B02,P,23
Description:
P: 1 to 3
Example
SMS Tx:
0000,B02,1,23
SMS Rx:
353358017784062,B02,OK
To turn off SMS alert: Power on Alarm: send command 0000,B03,1,22
21. Delete External Power on Alert – B03
SMS Set:
0000,B03,P,22
Description:
P: 1 to 3 (code relates to master phone numbers)
Example
SMS Tx:
0000,B03,1,22
SMS Rx:
353358017784062,B03,OK
To turn off SMS alert: Power off Alarm: send command 0000,B03,1,23
22. Delete External Power off Alert – B03
SMS Set:
0000,B03,P,23
Description:
P: 1 to 3
Example
SMS Tx:
0000,B03,1,23
SMS Rx:
353358017784062,B03,OK
Note: No spaces between characters when coding text message.
For Further information please contact
www.smart1marine.com.au