1. No category

FacePhi SDK 5.1.1
Software Development Kit
Installation Manual
www.FacePhi.com
This document is property of FacePhi Biometria S.L. All rights reserved. Total or partial copy of this document is forbidden. This document contains
information for internal use; consider it as a working tool.
Installation Manual
2
FacePhi
© 2014 FacePhi Biometria. All rights reserved.
FacePhi and F7 Face Recognition Logos are trademarks of “FacePhi
Biometría S.L.” (B-54659313) registered in Spain.
Other products and companies here mentioned may be registered
trademarks of their owners.
FacePhi Biometría often publishes new software versions and
upgrades; for this reason the images shown in this document may be
different from the ones shown on the screen.
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
CONTENT
1. INTRODUCTION ________________________________________________________________ 4
2. INSTALLATION _________________________________________________________________ 4
3. UNINSTALLATION ______________________________________________________________ 15
4. REPAIR ______________________________________________________________________ 16
5. ACTIVATION TOOL _____________________________________________________________ 20
6. CONTACT INFORMATION ________________________________________________________ 21
6.1 COMMERCIAL CONTACT ____________________________________________________________ 21
6.2 TECHNICAL SUPPORT_______________________________________________________________ 21
6.3 FEEDBACK AND SUGGESTIONS ________________________________________________________ 22
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
3
Installation Manual
1. Introduction
Welcome to FacePhi SDK 5.1.1 installation manual.
In this guide you will find all necessary information to correctly install and uninstall the
product. Please, remember that you can submit any inquiry to FacePhi through the
information you will find at “Contact Information”.
2. Installation
Please, double-click on “FacePhiLauncher” in order to launch the installation assistant.
The installation assistant will prompt you to provide administrator
permissions in order to proceed.
The first important requirement is to have “Microsoft Visual C++ 2012 x86
Redistributable” package in order to run some SDK libraries.
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
4
Installation Manual
If you do not meet first requirement, the following screen will be displayed:
5
Figure 1. Installation requirement
It is provided a link to download this package from Internet.
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
If you already have this component installed, you will get the following welcome screen:
6
Figure 2. Welcome screen. Install FacePhi SDK 5.1.1
This screen allows two actions:


Install FacePhi’s software
Uninstall any existing version of FacePhi’s software in the system
In case there is no conflict with different versions of FacePhi’s software, the installer will
permit you to install the new software on the device.
If there is a previous version of the product already installed, the installer will indicate that a
previous version has been found and it will be mandatory to remove this version.
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
7
Figure 3. Installation. Removing previous version of the product
When you click on “Uninstall”, the following screen will be displayed. If you continue, an
automatic process will start in order to remove the previous version detected in the system.
Figure 4. Confirmation message
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
When the user confirms the message, the uninstallation process starts and it removes the
previous product.
8
Figure 5. Uninstallation progress
Once this process has been completed, you will be able to install the new SDK version (Figure
1).
First of all, the screen of the installer is displayed.
Please, remember that you must have administrator permissions in order to
proceed with the installation.
Figure 6. Installation wizard. Start
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
Please, click on “Next” in order to proceed with the configuration process of the installation.
Important: In case you have any antivirus installed, we recommend you to
disable it during the installation process in order to avoid possible problems.
In the form below, it is displayed the End User License Agreement (EULA). You must accept
the terms and conditions of this agreement in order to continue with the installation process.
Figure 7. Installation. End User License Agreement
After accepting this agreement, the installer will verify the application prerequisites.
Please, remember that .NET Framework 4.0 or greater version is a
prerequisite for FacePhi SDK 5.1.1. If you do not have it installed, you will not
be allowed to continue with this process. You should cancel the installation,
install .NET Framework 4.0 or greater version and restart the installer. You can
download the full version package (Redistributable package) by clicking on the
following link: http://www.microsoft.com/enus/download/confirmation.aspx?id=17851; or the version which requires
Internet connection during the installation process:
http://www.microsoft.com/en-us/download/details.aspx?id=17851
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
9
Installation Manual
In case you have .NET Framework 4.0 or a greater version installed on your computer, the
following form will be displayed. You must confirm it and you will be able to proceed with the
installation:
10
Figure 8. Installation. .NET Framework required
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
Next, you must select the destination folder where you want to install the components of the
product:
11
Figure 9. Installation. Destination folder selection
Once you have selected the destination folder, you can choose the type of installation that
best suits your needs. Installation types available are shown here below:

Typical: it will deploy the components associated to extraction module, matching
module and documentation. It will be also installed a set of projects where FacePhi
SDK 5.1.1 is used as example. These examples are included in the folder that you have
chosen to install the SDK. If you install FacePhi SDK 5.1.1 in program files and you want
to compile the examples, your IDE (Integrated Development Environment) will prompt
you to restart with administrator permissions. As an alternative option, you can also
copy these sample projects to a path on disk which has the permissions required.

Custom: you can select the components to be installed.
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
12
Figure 10. Installation. Type of installation
In case you choose a “Custom” installation, a tree like the one shown below will be displayed
on the screen. From this tree, you can manually select the component of the application that
you wish to install:
Figure 11. Installation. Custom mode
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
Once you have chosen the components to install, you only have to confirm the installation
process, as shown in the following figure:
13
Figure 12. Installation. Ready to start
Clicking on “Install” will start the installation process. Depending on the chosen options and
the computer you are using, the time of installation may vary.
The system might prompt you to provide administrator permissions in order
to proceed.
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
14
Figure 13. Installation progress
Once the installation process has been completed, it will be displayed the screen of process
completed.
Figure 14. Installation. Process completed
If you click on “Finish”, the installation of the product will be completed.
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
3. Uninstallation
In case you already have FacePhi SDK 5.1.1 installed on your computer, the system will allow
you to choose between removing and repairing this version:
15
Figure 15. Uninstallation. Version 5.1.1 already installed
If you select “Uninstall”, the system will remove all files of FacePhi software from your
computer and it will restart the installation. If you want to uninstall version 5.1.1 you will have
to confirm the following message:
Figure 16. Uninstallation. Confirmation message
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
After removing FacePhi SDK 5.1.1, the following message will be displayed indicating that the
process has been successfully completed:
16
Figure 17. Uninstallation. Process successfully completed
4. Repair
If you select “Repair”, the system will launch the assistant in this mode:
Figure 18. Repair. Repair wizard
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
You will be able to choose among the following options:
17
Figure 19. Repair options

Change: it allows you to modify the components of FacePhi SDK 5.1.1 which are
already installed. From this menu, you can install new components that were not
deployed at the first installation. You can also remove components already installed:
Figure 20. Repair. Changing modules installed
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual

Repair: it will fix errors that may have occurred during the latest installation process. It
will fix missed or corrupt files, shortcuts and log entries. You will get the following
screen:
18
Figure 21. Repair. Repairing modules installed

Remove: it will remove all FacePhi SDK 5.1.1 files from your computer. Once you click
on “Remove”, the process will prompt you to confirm the operation:
Figure 22. Repair. Remove FacePhi SDK 5.1.1
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
If you decide to uninstall FacePhi SDK 5.1.1, a screen with a progress bar will be
displayed:
19
Figure 23. Removing progress
When uninstallation has been completed, you will get the following screen:
Figure 24. Uninstallation successfully completed
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
5. Activation Tool
To use the product supplied, you must activate it first. In order to do so, please, use
"FPhiSoftwareActivator" tool. For further information regarding its use and the activation
process, please, see "FPhi LM Software - Activation Guide"1.
This tool may be run after installing the product as shown in the image below.
Figure 25. Launch license configuration
1
You can find this document both in FacePhi’s product download server and in the program folder created
during the SDK installation (C:\Program Files (x86)\FacePhi\FacePhi SDK\v5.1\DotNet\Doc\manuals).
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
20
Installation Manual
6. Contact Information
For general inquiries, please, contact us through the following:
E-mail

[email protected]
21
Website

www.facephi.com
Headquarters
Avenida México, 20
Alicante 03008. Spain.

Telephone

(+34) 965 10 80 08
6.1 Commercial contact
For any commercial inquiry, please, contact us:
E-mail

[email protected]
Telephone

(+34) 965 10 80 08
6.2 Technical support
For any technical question, suggestion or report, please, contact us:
E-mail

[email protected]
Telephone

(+34) 965 10 80 08
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
6.3 Feedback and Suggestions
If you would like to make any suggestion or if you detect any kind of error, please, contact us:
E-mail

[email protected]
22
Telephone

(+34) 965 10 80 08
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)
Installation Manual
23
ALICANTE (SPAIN) - SILICON VALLEY - PANAMÁ CITY - BUENOS AIRES
SANTIAGO (CHILE) - SANTO DOMINGO (REP. DOMINICANA) - BOGOTÁ (COLOMBIA)