1. No category

CURRIES Price Manual
Specialty Section
Bullet Resistant
Doors and Frames
June, 2014
i
Index
Bullet Resistant Door Prices
April, 2014
DESCRIPTION
PAGE(S)
737S Series — Bullet Resistant 1 3/4"
Level 1-2
Standard Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Level 3
Standard Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Level 4-8
Standard Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2
737S Series Doors - Bullet Resistant Level 1-2
Bullet Resistant Door Prices
April, 2014
WIDTH
HEIGHT
16 GA.
14 GA.
20, 24, 26,
28, 210, 30
68
2524
3190
34, 36
68
2813
3195
38, 310,
40
20, 24, 26,
28, 210, 30
68
2815
3197
70
2561
3192
34, 36
70
2815
3197
38, 310,
40
20, 24, 26,
28, 210, 30
70
2817
3200
72
2600
3197
34, 36
72
2853
3202
38, 310,
40
72
2853
3206
30
80
2673
3206
34, 36
80
2936
3208
38, 310,
40
80
2942
3211
30
90
3132
3664
34, 36
90
3396
3667
38, 310,
40
90
3400
3669
30
100
3287
3819
34, 36
100
3551
3822
38, 310,
40
100
3555
3824
STANDARD DESCRIPTION
Proprietary bullet resistant core with an "A" edge bevel and exposed
seam "S" edge are standard.
1 7/8" thickness for 1 15/16" frame rabbet.
U.L. 752 bullet resistant label level 1 and level 2 doors must be ordered
as an assembly with factory welded M12 series frame.
EDGE BEVELS AVAILABLE
"A" standard (1/8" in 2" lock edge - square hinge edge)
"B" specify (square both edges)
"G" specify (1/8" in 2" bevel both edges)
No Charge
No Charge
Add
15
OPTIONS
Galvanneal steel (A60)
16 and 14 gauge door
Galvanize (G90) inlcudes epoxy primer
Polyurethane slab core
"N" Seamless edge filled
"T" Continuous wire welded
Visual ID tag
Add
Add
Add
Add
Add
Add
86
338
124
77
137
4
NON STANDARD SIZE DOORS
Price as the next largest standard size door
NOTE: Doors over 4' x10' not available. Only bullet resistant hardware
may be used. Contact factory for complete list of approved hardware.
Crating is included in the price of doors over 8' high.
OVERSIZED DOOR OPTIONS
Doors over 8' high are factory crated for protection in transit.
ASSA ABLOY, the global leader in door opening solutions
3
737S Series Doors - Bullet Resistant Level 1-2
Bullet Resistant Door Prices
April, 2014
EXTRAS
EXTRAS
CAPS — top or bottom
Steel installed flush (with screws per cap)
Add
23
CLOSER
Surface mounted, reinforcement only
Add
32
HINGE PREPARATIONS
4 1/2" standard or heavyweight
5" Hinge standard or heavyweight
1 1/2 pair up to and including 7'6"
2 pair over 7'6" to 10'0"
Anchor hinge set
(e.g. McKinney TA792) No drill, no tap
(e.g. McKinney TA793)
Continuous hinge
LOCK PREPARATIONS
Cylindrical lock 1 3/4" door 161
Cylindrical lock 1 3/4" door lever trim
(Universal lever trim prep.)
Deadlock 1 3/4" door tubular 181
Deadlock 1 3/4" door mortise 190
Standard
Add Each 4
Standard
Standard
Add 172
No Add
No Add
G2
G2B*
Standard
Standard
G16
G17
Standard
Add 83
FLUSH BOLTS OR SURFACE BOLTS
Top and bottom flush bolt ANSI A115.4
H1
(when used without astragal or with flat bar astragal)
Top and bottom surface bolt reinforced only
SB
Add
76
Add
52
LOCK PREPARATIONS CONTINUED
Mortise lock 1 3/4" door escutcheon trim
Mortise lock 1 3/4" door sectional trim
Hotel and master ring cylinder functions
Mortise lock edge only preparation
Mortise lock reinforce only
Mortise panic exit
Rim panic reinforce only
Rim panic reinforce with function holes
Rim vertical rod reinforce only
Rim vertical rod with function holes
Concealed vertical rods
Label Fire Pin (if required)
G3
G3A*
G3AEO
G3ARO
G12*
G11
G11*
G11A
G11A*
G12A*
LOUVERS – Not available
STRIKES
Electric strike
E9*
Add 101
Electric raceway
Add 150
*Advise of manufacturer and function of hardware. Hardware function
holes do not include trim mounting holes.
UNDERCUTS
1 3/4" doors — 5/8" standard, 3/8", 3/4" available No Add
All other undercuts per door
Add
VISION KITS
Vision kits installed - standard rim type kit
• FV3 (12" x 12" visible)
• HG
• FG
NOTE: U.L. Listed bullet resistant glass only.
Minimum glass size for vision lite is 12" x 12".
Advise specific glass size when ordering doors.
Factory installed glass available.
Contact factory for pricing.
ASSA ABLOY, the global leader in door opening solutions
$
Standard
Standard
Add 73
Standard
Standard
Add 69
Add 38
Add 38
Add 79
Add 79
Add 540
Add 17
23
Add 208
Add 257
Add 347
4
737 Series Doors - Bullet Resistant Level 3
Bullet Resistant Door Prices
June, 2014
WIDTH
HEIGHT
12 GA.
20, 24, 26,
28, 210, 30
68
3360
34, 36
68
3920
38, 310,
40
20, 24, 26,
28, 210, 30
68
3920
70
3360
34, 36
70
3920
38, 310,
40
20, 24, 26,
28, 210, 30
70
3920
72
3920
34, 36
72
4480
38, 310,
40
72
4480
30
80
3920
34, 36
80
4480
38, 310,
40
80
4480
30
90
4480
34, 36
90
5040
38, 310,
40
90
5040
30
100
5600
34, 36
100
6160
38, 310,
40
100
6160
STANDARD DESCRIPTION
Proprietary core with an "A" edge bevel and exposed
seam "T" edge are standard.
1 3/4" thickness for 1 15/16" frame rabbet.
U.L. 752 bullet resistant doors must be ordered as an assembly with
factory welded Level 3 series frames required.
EDGE BEVELS AVAILABLE
"A" standard (1/8" in 2" lock edge - square hinge edge)
No Charge
"B" specify (square both edges)
No Charge
"G" specify (1/8" in 2" bevel both edges)
Add
15
NOTE: For other edge bevels refer to Engineered Door Section.
OPTIONS
Galvanize (G90) inlcudes epoxy primer
Visual ID tag
Add
Add
338
4
NON STANDARD SIZE DOORS
Price as the next largest standard size door
NOTE: Doors over 4' x 10' not available. Only bullet resistant hardware
may be used. Contact factory for complete list of approved hardware.
Crating is included in the price of doors over 8' high.
CRATING CHARGE
Add $200.00 net per order for crating.
All orders will be factory crated.
NOTE: This product is manufactured offsite and ships separately.
Call to verify lead-times, freight cost, and shp schedule.
ASSA ABLOY, the global leader in door opening solutions
5
737S Series Doors - Bullet Resistant Level 3
Bullet Resistant Door Prices
April, 2014
EXTRAS
EXTRAS
CAPS — top or bottom
Steel installed flush (with screws per cap)
Add
23
CLOSER
Surface mounted, reinforcement only
Add
32
HINGE PREPARATIONS
4 1/2" standard or heavyweight
5" Hinge standard or heavyweight
1 1/2 pair up to and including 7'6"
2 pair over 7'6" to 10'0"
Anchor hinge set
(e.g. McKinney TA792) No drill, no tap
(e.g. McKinney TA793)
Continuous hinge
LOCK PREPARATIONS
Cylindrical lock 1 3/4" door 161
Cylindrical lock 1 3/4" door lever trim
(Universal lever trim prep.)
Deadlock 1 3/4" door tubular 181
Deadlock 1 3/4" door mortise 190
Standard
Add Each 4
Standard
Standard
Add 172
No Add
No Add
G2
G2B*
Standard
Standard
G16
G17
Standard
Add 83
FLUSH BOLTS OR SURFACE BOLTS
Top and bottom flush bolt ANSI A115.4
H1
(when used without astragal or with flat bar astragal)
Top and bottom surface bolt reinforced only
SB
Add
76
Add
52
LOCK PREPARATIONS CONTINUED
Mortise lock 1 3/4" door escutcheon trim
Mortise lock 1 3/4" door sectional trim
Hotel and master ring cylinder functions
Mortise lock edge only preparation
Mortise lock reinforce only
Mortise panic exit
Rim panic reinforce only
Rim panic reinforce with function holes
Rim vertical rod reinforce only
Rim vertical rod with function holes
Concealed vertical rods
Label Fire Pin (if required)
G3
G3A*
G3AEO
G3ARO
G12*
G11
G11*
G11A
G11A*
G12A*
LOUVERS – Not available
STRIKES
Electric strike
E9*
Add 101
Electric raceway
Add 150
*Advise of manufacturer and function of hardware. Hardware function
holes do not include trim mounting holes.
UNDERCUTS
1 3/4" doors — 5/8" standard, 3/8", 3/4" available No Add
All other undercuts per door
Add
23
VISION KITS
Vision kits installed - (1 1/8" pocket) standard rim type kit
• FV3 (12" x 12" visible)
Add 560
• HG
Add 560
• FG
Add 840
NOTE: U.L. Listed bullet resistant glass only.
Minimum glass size for vision lite is 12" x 12".
Advise specific glass size when ordering doors.
Factory installed glass available.
Contact factory for pricing.
ASSA ABLOY, the global leader in door opening solutions
$
Standard
Standard
Add 73
Standard
Standard
Add 69
Add 38
Add 38
Add 79
Add 79
Add 540
Add 17
6
737S Series Doors - Bullet Resistant Level 4-8
Bullet Resistant Door Prices
June, 2014
WIDTH
HEIGHT
14 GA.
12 GA.
20, 24, 26,
28, 210, 30
68
8400
10080
34, 36
68
8960
10640
38, 310,
40
20, 24, 26,
28, 210, 30
68
8960
10640
70
8400
10080
34, 36
70
8960
10640
38, 310,
40
20, 24, 26,
28, 210, 30
70
8960
10640
72
8960
10640
34, 36
72
9520
11200
38, 310,
40
72
9520
11200
30
80
8960
10640
34, 36
80
9520
11200
38, 310,
40
80
9520
11200
30
90
9520
11200
34, 36
90
10080
11760
38, 310,
40
90
10080
11760
STANDARD DESCRIPTION
Proprietary core with an "A" edge bevel and exposed
seam "T" edge are standard.
1 3/4" thickness for 1 15/16" frame rabbet.
U.L. 752 bullet resistant must be ordered as an assembly with factory
welded Level 4-8 series frames required.
EDGE BEVELS AVAILABLE
"A" standard (1/8" in 2" lock edge - square hinge edge)
No Charge
"B" specify (square both edges)
No Charge
"G" specify (1/8" in 2" bevel both edges)
Add
15
NOTE: For other edge bevels refer to Engineered Door Section.
OPTIONS
Galvanize (G90) inlcudes epoxy primer
Visual ID tag
Add
Add
338
4
NON STANDARD SIZE DOORS
Price as the next largest standard size door
NOTE: Doors over 4' x 9' not available. Only bullet resistant hardware
may be used. Contact factory for complete list of approved hardware.
CRATING CHARGE
Add $200.00 net per order for crating.
All orders will be factory crated.
NOTE: This product is manufactured offsite and ships separately.
Call to verify lead-times, freight cost, and shp schedule.
ASSA ABLOY, the global leader in door opening solutions
7
737S Series Doors - Bullet Resistant Level 4-8
Bullet Resistant Door Prices
April, 2014
EXTRAS
EXTRAS
CAPS — top or bottom
Steel installed flush (with screws per cap)
Add
23
LOCK PREPARATIONS CONTINUED
Rim panic reinforce only
Rim vertical rod reinforce only
CLOSER
Surface mounted, reinforcement only
Add
32
LOUVERS – Not available
HINGE PREPARATIONS
Pivots (mounting holes field drilled)
No Add
Add
Add
$
38
79
UNDERCUTS
1 3/4" doors — 5/8" standard, 3/8", 3/4" available No Add
All other undercuts per door
Add
23
G11
G11A
VISION KITS
Vision kits installed - standard rim type kit
• FV3 (12" x 12" visible)
• HG
• FG
NOTE: U.L. Listed bullet resistant glass only.
Minimum glass size for vision lite is 12" x 12".
Advise specific glass size when ordering doors.
Factory installed glass available.
Contact factory for pricing.
ASSA ABLOY, the global leader in door opening solutions
Add 4480
Add 5040
Factory Quote
i
Index
Bullet Resistant Frame Prices
April, 2014
DESCRIPTIONPAGE
Bullet Resistant Frames Level 1-3
12 Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Bullet Resistant Frames Level 4-8
14 Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
12 Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
ASSA ABLOY, the global leader in door opening solutions
2
Bullet Frames Level 1-3 12 Gauge
Bullet Resistant Frame Prices
June, 2014
WIDTH
SINGLES
1'6"
THRU
3'0"
3' +
THRU
4'0"
DOUBLES
4' +
THRU
6'0"
6' +
THRU
8'0"
HEIGHT
3
THRU
6
6-1/8
THRU
7-7/8
8
THRU
9-7/8
10
THRU
11-7/8
12
THRU
14
6'8"
7'
7'2"
8'
9'
10'
6'8"
7'
7'2"
8'
9'
10'
6'8"
7'
7'2"
8'
9'
10'
6'8"
7'
7'2"
8'
9'
10'
520
543
551
622
669
716
543
566
574
645
692
739
625
649
657
745
791
839
671
695
703
791
837
885
544
568
576
651
700
750
568
592
600
675
724
774
654
678
686
778
826
876
703
727
735
827
875
925
691
723
733
808
873
938
723
755
765
840
905
970
821
853
863
955
1019
1085
886
918
928
1020
1084
1150
806
844
858
944
1023
1102
845
883
897
983
1062
1141
957
995
1009
1111
1191
1269
1036
1074
1088
1190
1270
1348
921
967
983
1080
1173
1265
967
1013
1029
1126
1219
1311
1093
1139
1155
1269
1361
1453
1185
1231
1247
1361
1453
1545
HEADS
HINGE JAMBS
STRIKE JAMBS
FRAME COMPONENT PART PRICES (NO ANCHORS)
6'8"
7'
7'2"
8'
9'
10'
6'8"
7'
7'2"
8'
9'
10'
1'6" THRU 3'0"
3'+ THRU 4'0"
4'+ THRU 6'0"
6'+ THRU 8'0"
8'+ THRU 10'0"
184
195
199
224
248
271
215
227
231
273
296
320
109
132
183
229
276
193
205
209
236
261
286
225
237
241
285
309
334
114
138
192
241
291
251
267
272
299
332
364
284
300
305
349
381
414
144
176
241
306
371
297
316
323
356
395
435
330
349
356
405
445
484
167
206
285
364
442
343
366
374
412
459
505
376
399
407
462
508
554
190
236
329
421
514
GENERAL INFORMATION
CURRIES M series frames are available double rabbet (equal or unequal), single
rabbet profile. Prices reflect hardware preparations for 1 3/4" doors. Refer to
CURRIES Architectural Technical Data Manual for standard details and
limitations.
All equal face profile corners are saw miter only. 4" face heads and 2" face
jambs are SMO.
Miter and notch charges are included with these list prices on this page.
Note: 5-3/4" jamb depth frames have 1/2" minimum back bend. 7/16" N.A.
2" face unequal rabbet profile frames are standard. Double rabbet 1", 1 1/4", 1
1/2", and 1 3/4" face frames are priced the same as 2" face at no extra charge.
Jamb depth ranges are listed above each column.
1/8" increment jamb depths (all ranges 3" thru 14") are available at no extra
charge.
ANCHORS - foot clips are welded in place.
Standard loose jamb anchors are included in these prices; 3 per jamb up to
7'6" and 4 per jamb over 7'6". Complete anchor information is listed in the
Engineered Frame Section.
Welding charge only per anchor
(Add for appropriate anchor)
Add
2
EXTRAS
BUNDLING AND TAGGING FRAMES
Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F component bundling or welded frames
Add
Visual ID tag
Add
4
4
COMMUNICATING FRAME (4 7/8" - 14")
Available for 1 3/4" doors
N/C
ASSA ABLOY, the global leader in door opening solutions
3
Bullet Frames Level 1-3 12 Gauge
Bullet Resistant Frame Prices
April, 2014
FOUR (4") INCH FACE HEADS (4 3/4" - 14") JAMB DEPTH
Available for 1 3/4" doors
Single including 4'0"
Pairs over 4'0"
Add 44
Add 63
GALVANNEAL (A60) FRAME ADDS
Price per frame piece
Price per 3 Sided frame
Add 16
Add 48
GALVANIZED (G-90)
Price per frame piece
Add 22
Price per 3 Sided frame
Add 66
U.L. BULLET RESISTANT LABEL
Assemblies are available with the 737 Level 1-3 door. Frames must be factory welded.
Add to the frame price (factory welding) SMW 254
Bullet Resistant label Level 1-3.
Add 56
ASSA ABLOY, the global leader in door opening solutions
HARDWARE PREPARATIONS
CLOSER PREPARATIONS
Concealed closer
Add 234
Regular arm
E10
Add 23
Parallel arm
E11
Add 23
Half sleeve
E18
Add 32
Full sleeve
E17
Add 41
FLUSH BOLTS
Standard ANSI 115.4
H2
Add 50
Reversible (strike plate included)
H5
Add 50
Reinforce only
H1
Add 23
HINGE PREPARATIONS
4 1/2" standard or heavyweight
Standard
1 1/2 pair up to and including 7'6"
Standard
2 pair over 7'6" to 10'0"
Standard
5" standard or heavyweight
Add Each 4
Full surface mounted continuous hinge reinforcementAdd
69
High frequency reinforcement strap support
Per hinge
Add 20
HOLDERS
Overhead concealed
Add 158
Overhead stop and holder surface mounted 14 ga.
Add 23
PIVOTS
Top and bottom set single acting
Per frame Add 203
Per jamb Add 86
Per head Add 117
Intermediate pivot single acting
Each
Add 69
PANIC EXIT REINFORCING
Rim type
E8
Add 16
Rim vertical rod surface mounted strike
E5
Add 23
Vertical rod mortise strike in head-Each
G20
Add 60
STRIKES
4 7/8" ANSI lipped strike 1 3/4" door
E1
Standard
2 3/4" ANSI lipped strike 1 3/8" or 1 3/4" door
E2
Standard
3 1/2" ANSI deadlock strike 1 3/8" or 1 3/4" door E3
Standard
2 3/4" ANSI deadlock strike 1 3/8" or 1 3/4" door E4
Standard
Electric strike frame
E9
Add 101
(includes cover box with knockout)
SURFACE BOLTS
Reinforcement only
Add 23
4
Bullet Frames Level 4-8 14 Gauge
Bullet Resistant Frame Prices
SINGLES
June, 2014
WIDTH
HEIGHT
2' +
THRU
3'0"
6'8"
7'
7'2"
8'
3’ +
THRU
4’0”
6'8"
7'
7'2"
8'
9’
9’
3
THRU
7-7/8
8
THRU
9-7/8
10
THRU
13
3360
3360
3920
3920
4480
3640
3640
4200
4200
4760
3416
3416
3976
3976
4536
3696
3696
4256
4256
4816
3472
3472
4032
4032
4592
3752
3752
4312
4312
4872
STRIKE
JAMBS
6'8"
7'
7'2"
8'
HINGE
JAMBS
FRAME COMPONENT PART PRICES (NO ANCHORS)
6'8"
7'
7'2"
8'
9’
1208
1208
1448
1448
1712
1384
1384
1704
1704
2000
1224
1224
1464
1464
1728
1408
1408
1728
1728
2024
1240
1240
1480
1480
1744
1432
1432
1752
1752
2048
3’
768
784
800
4’
1048
1064
1080
HEADS
9’
Contact factory for pricing of pairs.
GENERAL INFORMATION
CURRIES M series frames are available double rabbet (equal or unequal) profile.
Prices reflect hardware preparations for 1 3/4" doors. Refer to CURRIES
Architectural Technical Data Manual for standard details and limitations.
All equal face profile corners are die miter only. 4" face heads and 2" face.
Miter, notch, and welding charges are included with these list prices on this
page.
Note: 5-3/4" jamb depth frames have 1/2" minimum back bend. 7/16" N.A.
2" face unequal rabbet profile frames are standard. Double rabbet 1", 1 1/4",
1 1/2", and 1 3/4" face frames are priced the same as 2" face at no extra
charge.
Jamb depth ranges are listed above each column.
1/8" increment jamb depths (all ranges 3" thru 14") are available at no extra
charge.
ANCHORS - foot clips are welded in place.
Standard loose jamb anchors are included in these prices; 3 per jamb up to
7'6" and 4 per jamb over 7'6". Complete anchor information is listed in the
Engineered Frame Section.
Welding charge only per anchor
(Add for appropriate anchor)
Add
2
EXTRAS
BUNDLING AND TAGGING FRAMES
Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F component bundling or welded frames
Add
Visual ID tag
Add
4
4
CRATING CHARGE
Add $200.00 net per order for crating.
All orders will be factory crated. NOTE: This product is manufactured offsite and ships separately.
Call to verify lead-times, freight cost, and shp schedule.
ASSA ABLOY, the global leader in door opening solutions
5
Bullet Frames Level 4-8 14 Gauge
Bullet Resistant Frame Prices
April, 2014
FOUR (4") INCH FACE HEADS (4 3/4" - 14") JAMB DEPTH
Available for 1 3/4" doors
Single including 4'0"
Pairs over 4'0"
Add 44
Add 63
GALVANIZED (G-90)
Price per frame piece
Price per 3 Sided frame
Add 22
Add 66
HARDWARE PREPARATIONS
CLOSER PREPARATIONS
Concealed closer
Regular arm
E10
Parallel arm
E11
Half sleeve
E18
Full sleeve
E17
Add
Add
Add
Add
Add
HINGE PREPARATIONS
Full surface mounted continuous hinge reinforcementAdd
PANIC EXIT REINFORCING
Rim type
Rim vertical rod surface mounted strike
Vertical rod mortise strike in head-Each
E8
E5
G20
SURFACE BOLTS
Reinforcement only
ASSA ABLOY, the global leader in door opening solutions
234
23
23
32
41
69
Add 16
Add 23
Add 60
Add 23
6
Bullet Frames Level 4-8 12 Gauge
Bullet Resistant Frame Prices
SINGLES
June, 2014
WIDTH
HEIGHT
2' +
THRU
3'0"
6'8"
7'
7'2"
8'
3’ +
THRU
4’0”
6'8"
7'
7'2"
8'
9’
9’
3
THRU
7-7/8
8
THRU
9-7/8
10
THRU
13
3696
3696
4256
4256
4816
3976
3976
4536
4536
5096
3752
3752
4312
4312
4872
4032
4032
4592
4592
5152
3808
3808
4368
4368
4928
4088
4088
4648
4648
5208
STRIKE
JAMBS
6'8"
7'
7'2"
8'
HINGE
JAMBS
FRAME COMPONENT PART PRICES (NO ANCHORS)
6'8"
7'
7'2"
8'
9’
1328
1328
1568
1568
1832
1520
1520
1840
1840
2136
1344
1344
1584
1584
1848
1544
1544
1864
1864
2160
1360
1360
1600
1600
1864
1568
1568
1888
1888
2184
3’
848
864
880
4’
1128
1144
1160
HEADS
9’
Contact factory for pricing of pairs.
GENERAL INFORMATION
CURRIES M series frames are available double rabbet (equal or unequal) profile.
Prices reflect hardware preparations for 1 3/4" doors. Refer to CURRIES
Architectural Technical Data Manual for standard details and limitations.
All equal face profile corners are die miter only. 4" face heads and 2" face.
Miter, notch, and welding charges are included with these list prices on this
page.
Note: 5-3/4" jamb depth frames have 1/2" minimum back bend. 7/16" N.A.
2" face unequal rabbet profile frames are standard. Double rabbet 1", 1 1/4", 1
1/2", and 1 3/4" face frames are priced the same as 2" face at no extra charge.
Jamb depth ranges are listed above each column.
1/8" increment jamb depths (all ranges 3" thru 14") are available at no extra
charge.
ANCHORS - foot clips are welded in place.
Standard loose jamb anchors are included in these prices; 3 per jamb up to
7'6" and 4 per jamb over 7'6". Complete anchor information is listed in the
Engineered Frame Section.
Welding charge only per anchor
(Add for appropriate anchor)
Add
2
EXTRAS
BUNDLING AND TAGGING FRAMES
Frame Order Code 3F, 3FH, 3FV, 2F, SL, BL, and 4F component bundling or welded frames
Add
Visual ID tag
Add
4
4
CRATING CHARGE
Add $200.00 net per order for crating.
All orders will be factory crated. NOTE: This product is manufactured offsite and ships separately.
Call to verify lead-times, freight cost, and shp schedule.
ASSA ABLOY, the global leader in door opening solutions
7
Bullet Frames Level 4-8 12 Gauge
Bullet Resistant Frame Prices
April, 2014
FOUR (4") INCH FACE HEADS (4 3/4" - 14") JAMB DEPTH
Available for 1 3/4" doors
Single including 4'0"
Pairs over 4'0"
Add 44
Add 63
GALVANIZED (G-90)
Price per frame piece
Price per 3 Sided frame
Add 22
Add 66
HARDWARE PREPARATIONS
CLOSER PREPARATIONS
Concealed closer
Regular arm
E10
Parallel arm
E11
Half sleeve
E18
Full sleeve
E17
Add
Add
Add
Add
Add
HINGE PREPARATIONS
Full surface mounted continuous hinge reinforcementAdd
PANIC EXIT REINFORCING
Rim type
Rim vertical rod surface mounted strike
Vertical rod mortise strike in head-Each
E8
E5
G20
SURFACE BOLTS
Reinforcement only
ASSA ABLOY, the global leader in door opening solutions
234
23
23
32
41
69
Add 16
Add 23
Add 60
Add 23