OMEGA GENERAL INFORMATION POWER OUTLETS Choose from 24 international power outlets available in black, grey and white. Optional colours also available. Contact your closest distributor or visit www.powerlogic.net for more information. 75 POWER OUTLET ORIENTATION Sockets are pre-fitted at any angle in 45 degree increments. See reverse for details. 245 VARIOUS CONFIGURATIONS The possibilities are nearly endless with a wide variety of power outlets, data/voice connections, switches and protection devices available in any configuration. PROTECTION Units can be fitted with Fuses, RCCB, RCB, ELCB or filters to protect against inadvertent power overloads. PERIPHERAL OPTIONS Cat 6 RCA USB Data HDMI VGA Audio /Mic 67 2 SWITCHES The unit is able to house a 15A Thermal Overload Switch as well as other standard red or green switches depending on the client’s request. WORK SURFACE 48 Simplify and manage your desk with easy access to power and data with the in-desk mounted Omega unit. Never struggle to reach a power or data outlet again. AESTHETICS The unit has a wide variety of colours and finishes for both metal and plastic components that are sure to complement any environment. Contact your distributor for detailed options. HDMI MOUNTING The Omega can be mounted in any work surface with a desk thickness ranging from 15mm to 30mm. See reverse for installation options. All measurements are in millimeters unless otherwise indicated © 2014 Copyright Powerlogic SA (Pty) Ltd. All Rights Reserved. Due to continual product improvements and upgrades, Power Logic reserves the right to amend and change products as it sees fit. As such, images of products are for indicative purposes only and actual products may vary from those depicted and certain options may be unavailable. Always check with your distributor or with Power Logic regarding availability of the product of your choice. POWER OPTIONS The unit has Hybrid Power capabilities (power & data) and is also able to house one or more circuits in a single unit. OMEGA INSTALLATION & OPERATION INSTALLATION EDGE OF WORK SURFACE Work Surface 50mm Cut-out Work Surface STEP 1 Measure the Omega length (determined by configuration) and make a cut-out in a predetermined location with the measured length and the standard width of 67mm. Ensure there is sufficient clearance; 100mm below the work surface and at least 50mm between the cut-out edge and the edge of the work surface. Ensure the cable can reach the power point with ease. DIMENSIONS: Width: Length: Total Height (Open): Clamp Arms STEP 2 Lower the unit into the cut-out, cable first. Do not connect the unit to power until the installation is complete. Be sure to check that the cable has sufficient space and will not be obstructed or placed under strain. 67mm (Approx. 2.64 in.) Determined by Configuration 50mm (Approx. 1.96 in.) WORK SURFACE THICKNESS: 15mm - 30mm (Approx. 0.59 in. - 1.57 in.) ELECTRICAL: Operating Voltage: Current: Max Power: 220V - 250V @ 50 Hz 110V - 125V AC @ 60 Hz 15A (20A - upgraded wiring) 1800W @ 110V - 125V AC 3000W @ 220V - 250V AC MAINTENANCE AND CARE: Ensure unit is disconnected prior to cleaning. Clean the unit with a damp cloth and dry immediately. Do not use harsh chemical solvents. 315° 0° STEP 3 Slide both the clamps on, on opposite sides of the unit from below. Be sure to engage teeth correctly to ensure a properly fastened unit. To remove the clamp, pull the arms on the clamp apart to disengage the teeth and slide the clamp down. 45° 270° 225° 90° 180° 135° Socket Orientations: This socket is currently at 0° PLEASE NOTE: All products carry a 12 month limited warranty which excludes normal wear and tear and product abuse. The warranty will be void in the event of product tampering. WARNING For indoor use only If any malfunction occurs, do not attempt to repair Return product to manufacturer for repair Do not insert foreign objects into power outlets For counter top mounting For other options, contact your distributor © 2014 Copyright Powerlogic SA (Pty) Ltd. All Rights Reserved. Due to continual product improvements and upgrades, Power Logic reserves the right to amend and change products as it sees fit. As such, images of products are for indicative purposes only and actual products may vary from those depicted and certain options may be unavailable. Always check with your distributor or with Power Logic regarding availability of the product of your choice.