TALI 200 TITRATING APPARATUS Concentration of spinbath in Viscose (Rayon) fiber and filament production - a key for perfect fiber and filament quality. Our TALI 200 measures the sulphuric acid and zinc sulphate concentration of the spinbath and controls the process by means of a continuous on-line analysis. In connection with a density measurement, also the amount of Natrium Sulphate can be determined. Reduced deviations of spinbath concentrations stabilize the product quality. The on-line measurement and process control reduce costs for labor, input of chemicals and avoid human errors. The benefits of TALI 200 have been proven for more than 20 years in numerous Viscose productions worldwide. PROCESS CONTROL TALI 200 TITRATING APPARATUS Scope: Titrating apparatus for continuous on-line analysis of spinbath in Viscose (Rayon) fiber and filament productions to determine the concentrations of sulfuric acid and zinc sulfate and to control the process using industrially standardized signals. Closed control loop: The output signals can be used for automatic dosing and control of H2SO4 and ZnSO4, for keeping the concentration automatically within certain limits Measuring ranges: H2SO4 up to 250 g/l ZnSO4 up to 250 g/l Na2SO4* up to 250 g/l Accuracy: H2SO4 ZnSO4 Na2SO4* TALI 200 consists of a fully stainless steel housing with splash proof protection IP65, analysing unit with two storage containers, electrical unit with free programmable control system and operator panel with LCD display <±1.0 g/l <±1.0 g/l <±1.0 g/l Electrical mains supply: 220 V, 50 - 60 Hz, single phase with earth contact, max. 400 VA (other voltages on request) Measurement frequency: Programmable, max. 6 measurements/hour Output signal: Analogous 0 - 20 mA or 4 - 20 mA for H2SO4 and ZnSO4 concentrations Analogous 0 - 20 mA or 4 - 20 mA for Na2SO4* concentration Ambient conditions: Temperature max. 35°C Relative humidity max. 90%, not condensing Measuring principle: Automatic pH titration with NaOH, Zn titration with complex former and NaOH. Dimensions: Height: Width: Depth: Weight: 1600 mm 1040 mm 720 mm approx. 175kg Alarm levels: Can be specified individually due to requirements Optional: Serial interface for data output to a printer, process control system Limit signal (relay contacts) Example of process improvement through TALI 200 Concentration after installation of TALI200 in combination with closed control loop Technical data and pictures are subject to change! Lenzing Instruments GmbH & Co. KG A-4860 Lenzing, Austria E-mail: [email protected] www.lenzing-instruments.com T HE T EXTECHNO G ROUP Your reliable partners for quality improvement Textechno Herbert Stein GmbH Co. KG D-41066 Mönchengladbach, Germany E-mail: [email protected] www.textechno.com
© Copyright 2024