D+H MECHATRONIC AG Bracket range 2012 | Schüco® ® Schüco CDC bracket sets for Installation solutions for drives Application Inward opening bottom-hung window Inward opening side-hung window Bottom-hung window, Side-hung window, inwards opening aluminium, integrated mounting · CDC drive Projected top-hung vent, Parallel outward opening window, outwards opening aluminium, Attention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width! Product information Type Art. no. set Installation type CDC, 350 housing integrated mounting, CDC, 600 housing surfaced mounting · CDC drive · KA drive Frame material used AD drawing number Components Sash bracket / art. no. Roof windows, outwards opening aluminium profile system · KA drive · CDP drive Cover plate /art. no. · ZA drive · SXD drive Scope of supply Complete, including fixing materials · DXD drive *See the application overview for CDC bracket sets on the reverse for detailed information about the profile series Frame bracket / art. no. Top-hung windows, outwards opening aluminium profile system · KA drive Turning sash windows, inwards opening · KA drive © 2012 D+H Mechatronic AG, Ammersbek D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 1 Series CDC aluminium profile system ® CDC Schüco bracket sets for Contents Overview profile series incl. outer frame and sash frame Outer frame profiles Profile series / type of assembly Bracket set Art. Sash no. profiles Page CDC bracket sets 4 Mounting solutions for bottom-hung windows, side-hung windows, aluminium CDC-BS034-IFI Series AWS 65; 70.HI; 75.SI CDC-BS035-IFI CDC-BS034-IFI Series AWS 70BS.HI; 70WF.HI; 75BS.HI CDC-BS035-IFI CDC-BS041-IFI Series Royal C; S xx CDC-BS042-IFI CDC-BS034-IFI Series Royal S xx.HI CDC-BS035-IFI 25.ADN.KS 25.ADP.KS 25.ADN.KS 25.ADP.KS 25.AEF.KS 25.AEE.KS 25.ADN.KS 25.ADP.KS 4 5 5 7 7 9 9 11 11 Mounting solutions for projected top-hung windows, parallel outward opening windows, aluminium 13 CDC-BS009-VFO 25.ABE.KS 15 Series AWS 102 Colour option 16 KA bracket sets 17 Mounting solutions for roof windows Series AWS 57 RO KA-BS062-VFO KA-SW-BS063-VFO KA-TW-BS064-VFO KA-BS053-VFO KA-TW-BS054-VFO KA-BS009-VFO KA-TW-BS027-VFO KA-SW-BS007-VFO KA-BS010-VFO KA-TW-BS028-VFO KA-SW-BS008-VFO 26.ADY.KS 26.ADZ.KS 26.AEA.KS 26.ADR.KS 26.ADS.KS 26.ABF.KS 26.ACF.KS 26.ABB.KS 26.ABG.KS 26.ACG.KS 26.ABE.KS KA-BS036-VFO KA-TW-BS039-VFO 26.ACS.KS 26.ACV.KS 17 18 18 18 19 19 20 20 20 21 21 21 22 23 23 Mounting solutions for projected top-hung windows, parallel outwards opening windows Series AWS102 SK (sash profile 339 470) KA-BS001-VFO 26.AAF.KS KA-TW-BS045-VFO 26.ADB.KS Series AWS102 SK (sash profile 339 490) KA-BS051-VFO 26.ADJ.KS KA-TW-BS068-VFO 26.AEG.KS 24 25 25 26 26 Mounting solutions for turning-sash windows Series AWS 27 28 28 29 Series Royal S 47D Series Royal S 88D Series Royal S 106D Mounting solutions for top-hung windows Series AWS 65, 70, 75 KA-BS085-VFIS KA-TW-BS086-VFIS Colour option Page 2 D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com 26.AFL.KS 26.AFM.KS © 2012 D+H Mechatronic AG, Ammersbek ® Schüco CDC bracket sets for Contents Application Profile series / type of assembly Bracket set Inward openingsets bottom-hung window CDP bracket Inward opening side-hung window 31 CDP-BS003-OM CDP-BS001-OM 31 32 33 34 Mounting solutions for roof windows Series AWS 57 RO (Blendrahmen 331 810, 331 820) Series AWS 57 RO (Blendrahmen 369 770, 369 780) Colour option Art. no. 26.CAL.KS 26.CAJ.KS Page ZA bracket sets 35 Mounting solutions for roof windows Series AWS 57 RO (Blendrahmen 331 810, 331 820) 35 36 36 37 37 38 38 39 39 40 ZA-BS030-OM 27.BCR.KS ZA-BS031-SM 27.BCP.KS ZA-BS028-OM 27.BCM.KS Series AWS 57 RO (Blendrahmen 369 770, 369 780) Attention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width! ZA-BS029-SM 27.BCN.KS Series Royal S 88D Product information CDC, 350 housing ZA-BS009-SM CDC, 60027.BAT.KS housing ZA-BS010-OM 27.BBC.KS Type ZA-BS011-SM 27.BBD.KS Series Royal S 106D Art. no. set ZA-BS012-OM 27.BBE.KS Installation type Colour option Frame material used AD drawing number Components Mounting solutions for roof windows Sash bracket / art. no. Series AWS 57 RO (Blendrahmen 331 820) 27.CAK.KS SXD-BS001-SM Frame bracket / art. no. 27.CAL.KS SXD-BS002-OM Cover plate /art. no. 27.CAM.KS SXD-BS003-SM Series AWS 57 RO (Blendrahmen 369 780) 27.CAN.KS SXD-BS004-OM Scope ofRoyal supplyS 88D Complete, including fixing materials -SM 27.CAP.KS SXD-BS005 Series *See the application overview for CDC bracket sets on the reverse for detailed information series -OM about the profile 27.CAR.KS SXD-BS006 27.CAS.KS SXD-BS007-SM Series Royal S 106D 27.CAT.KS SXD-BS008-OM Colour option 41 42 42 43 43 44 44 45 45 46 DXD bracket sets 47 Mounting solutions for roof windows Series AWS 57 RO Flügelrahmen 331 810, 331 820 Series AWS 57 RO Flügelrahmen 369 770, 369 780 Series Royal S 88D Series Royal S 106D DXD-BS028-OM DXD-BS029-SM DXD-BS028-OM DXD-BS029-SM DXD-BS007-OM DXD-BS008-SM DXD-BS005-OM DXD-BS006-SM 27.ACW.KS 27.ACX.KS 27.ACW.KS 27.ACX.KS 27.ABD.KS 27.ABF.KS 27.AAP.KS 27.AAR.KS Colour option © 2012 D+H Mechatronic AG, Ammersbek D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com 47 48 48 49 49 50 50 51 51 52 Page 3 Series CDC 41 SXD bracket sets CDC bracket sets for Mounting solutions for bottom-hung windows, Overview profile series incl. outer frame and sash frame side-hung windows Outer frame profiles Arguments for D+H installation solutions Sash profiles Efficiency • Time-saving installation through optimum adaptation of the bracket set to the particular profile system Design • No visible fixing material EN 12101-2 tested • Solutions tested as complete systems for smoke and heat vent applications according to DIN EN 12101-2 Quick fitting • Brackets are ready for immediate fitting – no additional adaptation work on the brackets is necessary Retains the centre seal • The motor cover included guarantees an optimum fixing of the centre seal Simple chain disconnection • Disconnection of chain also possible when the window is closed Complete scope of supply • All materials necessary for fixing are included in the scope of supply of the bracket set Special colours • The sash bracket can be supplied in a special colour as an option, according to RAL Classic (colour chart RAL-K5) (wet-painted or powder-coated) Simple application overview • Easy selection of the correct fittings with the D+H application table Documentation • Application drawings suitable for window and facade manufacturers available Page 4 D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek CDC bracket sets for Schüco® Series AWS 65; 70.HI; 75.SI* Application Inward opening bottom-hung window Inward opening side-hung window · Minimum outer frame face width on the inside 40mm · Minimum outer frame face width on the inside 40mm · Minimum outer frame width 700mm (CDC; 350 housing) or 950mm (CDC; 600 housing), for outer frame with 50mm face height on the inside DIN-left: · standard chain up to 350mm stroke · SBD chain up to 150mm stroke Attention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width! Product information CDC, 350 housing CDC, 600 housing Type CDC-BS034-IFI CDC-BS035-IFI Art. no. set 25.ADN.KS 25.ADP.KS Installation type profile integrated profile integrated Frame material used aluminium windows aluminium windows AD drawing number AD00153 AD000153 Components CDC-BS034-IFI CDC-BS035-IFI Sash bracket / art. no. CDC-SB015 / 25.ADM.KS CDC-SB015 / 25.ADM.KS Frame bracket / art. no. CDC-FB003 / 25.AAN.KS CDC-FB003 / 25.AAN.KS Cover plate /art. no. CDC-CP001 / 25.AAH.KS CDC-CP006 / 25.ABH.KS Scope of supply Complete, including fixing materials *See the application overview for CDC bracket sets on the reverse for detailed information about the profile series © 2012 D+H Mechatronic AG, Ammersbek CDC-BS035-IFI D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 5 Series CDC CDC-BS034-IFI CDC bracket sets for Overview profile series incl. outer frame and sash frame Outer frame profiles Sash profiles Schüco® Series AWS 65 363 940 363 950 363 960 363 970 364 020 364 030 364 040 364 050 364 060 364 260 364 440 364 460 364 470 364 480 364 870 364 880 364 890 364 620 364 630 364 650 364 660 364 680 364 690 364 700 364 710 364 720 374 840 374 850 358 810 358 820 358 830 358 510 367 190 367 200 367 210 358 590 358 610 358 620 358 650 358 640 358 660 382 940 382 950 358 960 358 960 358 960 358 980 382 470 382 480 382 490 373 990 374 890 374 910 374 920 Schüco® Series AWS 70 HI 358 170 358 190 358 270 358 200 358 280 358 210 358 220 358 290 358 300 358 230 358 310 358 430 358 320 358 440 Schüco® Series AWS 75 SI 367 280 367 290 367 300 374 980 382 100 382 170 382 180 382 190 382 200 382 210 Page 6 382 300 382 310 382 320 382 330 382 340 382 380 382 390 382 400 D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek CDC bracket sets for Schüco® Series AWS 70 BS.HI; 70 WF.HI; Application Inward opening bottom-hung window Inward opening side-hung window · Minimum outer frame face width on the inside 40mm · Minimum outer frame face width on the inside 40mm · Minimum outer frame width 700mm (CDC; 350 housing) or 950mm (CDC; 600 housing), for outer frame with 50mm face height on the inside DIN-left: · standard chain up to 350mm stroke · SBD chain up to 150mm stroke Attention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width! Product information CDC, 350 housing CDC, 600 housing Type CDC-BS034-IFI CDC-BS035-IFI Art. no. set 25.ADN.KS 25.ADP.KS Installation type profile integrated profile integrated Frame material used aluminium windows aluminium windows AD drawing number AD00118 AD000118 Components CDC-BS034-IFI CDC-BS035-IFI Sash bracket / art. no. CDC-SB015 / 25.ADM.KS CDC-SB015 / 25.ADM.KS Frame bracket / art. no. CDC-FB003 / 25.AAN.KS CDC-FB003 / 25.AAN.KS Cover plate /art. no. CDC-CP001 / 25.AAH.KS CDC-CP006 / 25.ABH.KS Scope of supply Complete, including fixing materials *See the application overview for CDC bracket sets on the reverse for detailed information about the profile series © 2012 D+H Mechatronic AG, Ammersbek CDC-BS035-IFI D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 7 Series CDC CDC-BS034-IFI CDC bracket sets for Overview profile series incl. outer frame and sash frame Outer frame profiles Sash profiles Schüco® Series AWS 70 BS.HI 366 220 366 230 366 410 366 430 366 570 366 570 366 790 366 800 366 470 366 490 367 340 Schüco® Series AWS 70 WF.HI 366 730 366 740 366 410 366 430 Schüco® Series AWS 75 BS.HI 366 340 Page 8 366 350 D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek CDC bracket sets for Schüco® Series Royal C; S 65; 65H; 70; 70H; 70BS; 70FF* Application Inward opening bottom-hung window Inward opening side-hung window · Minimum outer frame face width on the inside 40mm · Minimum outer frame face width on the inside 40mm · Minimum outer frame width 700mm (CDC; 350 housing) or 950mm (CDC; 600 housing), for outer frame with 50mm face height on the inside DIN-left: · standard chain up to 350mm stroke · SBD chain up to 150mm stroke Attention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width! Product information CDC, 350 housing CDC, 600 housing Type CDC-BS041-IFI CDC-BS042-IFI Art. no. set 25.AEE.KS 25.AEF.KS Installation type profile integrated profile integrated Frame material used aluminium windows aluminium windows AD drawing number AD00186 AD00186 Components CDC-BS041-IFI CDC-BS042-IFI Sash bracket / art. no. CDC-SB015 / 25.ADM.KS CDC-SB015 / 25.ADM.KS Frame bracket / art. no. CDC-FB003 / 25.AAN.KS CDC-FB003 / 25.AAN.KS Cover plate /art. no. CDC-CP002 / 25.AAJ.KS CDC-CP010 / 25.ABM.KS Scope of supply Complete, including fixing materials *See the application overview for CDC bracket sets on the reverse for detailed information about the profile series © 2012 D+H Mechatronic AG, Ammersbek CDC-BS042-IFI D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 9 Series CDC CDC-BS041-IFI CDC bracket sets for Overview profile series incl. outer frame and sash frame Outer frame profiles Sash profiles Schüco® Series Royal C 340 070 340 080 340 090 340 100 340 140 340 150 340 160 340 170 340 320 340 820 340 830 340 900 340 950 340 270 340 180 340 190 340 200 340 210 340 640 166 460 166 570 166 810 166 900 166 940 197 110 166 470 166 480 166 490 166 640 319 050(RS 65H) 310 630 310 950 310 930 310 840 310 850 311 040 360 420 360 460 360 470 360 480 360 420 360 460 360 470 360 480 Schüco® Series Royal S 65, Royal S 65H 166 040 166 080 166 220/166 230 166 240 166 250 166 260 166 270 166 280 166 320 166 330/166 670 166 340/166 680 166 440 166 450 Schüco® Series Royal S 70, Royal S 70H 310 500 310 510 310 520 310 530 310 540 310 580 310 590 310 600 310 610 310 620 Schüco® Series Royal S 70BS 312 790 312 800 310 260 310 270 Schüco® Series Royal S 70FF 179 710 179 730 Page 10 310 260 310 270 D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek CDC bracket sets for Schüco® Series Royal S 65.HI; 65H.HI; 70.HI; 70H.HI; 70BS.HI; 75.HI; 75BS.HI; 75FF.HI* Application Inward opening bottom-hung window Inward opening side-hung window · Minimum outer frame face width on the inside 40mm · Minimum outer frame face width on the inside 40mm · Minimum outer frame width 700mm (CDC; 350 housing) or 950mm (CDC; 600 housing), for outer frame with 50mm face height on the inside DIN-left: · standard chain up to 350mm stroke · SBD chain up to 150mm stroke Attention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width! Product information CDC, 350 housing CDC, 600 housing Type CDC-BS034-IFI CDC-BS035-IFI Art. no. set 25.ADN.KS 25.ADP.KS Installation type profile integrated profile integrated Frame material used aluminium windows aluminium windows AD drawing number AD00185 AD00185 Components CDC-BS034-IFI CDC-BS035-IFI Sash bracket / art. no. CDC-SB015 / 25.ADM.KS CDC-SB015 / 25.ADM.KS Frame bracket / art. no. CDC-FB003 / 25.AAN.KS CDC-FB003 / 25.AAN.KS Cover plate /art. no. CDC-CP001 / 25.AAH.KS CDC-CP006 / 25.ABH.KS Scope of supply Complete, including fixing materials *See the application overview for CDC bracket sets on the reverse for detailed information about the profile series © 2012 D+H Mechatronic AG, Ammersbek CDC-BS035-IFI D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 11 Series CDC CDC-BS034-IFI CDC bracket sets for Overview profile series incl. outer frame and sash frame Outer frame profiles Sash profiles Schüco® Series Royal S 65.HI, Royal S 65H.HI 370 080 370 090 370 100 370 110 370 220 370 230 370 240 370 250 370 260 370 270 370 280 370 360 370 370 370 430 370 440/370 450 370 460/370 470 370 480 370 600 370 630 370 660 370 670 370 680 370 880 370 840(RS 65H.HI) 320 400 320 790 320 890 320 900/320 910 320 920 320 440 320 450 320 460 320 570 360 550 360 560 380 340 380 350 380 370 380 390 380 280 380 520 380 530 380 540 319 650 319 630 380 860 319 630 Schüco® Series Royal S 70.HI; Royal S 70H.HI 320 100 320 110 320 120 320 130 320 140 320 180 320 190 320 200 320 210 320 220 320 230 320 320/320 340 Schüco® Series Royal S 70BS.HI 360 240 360 250 Schüco® Series Royal S 75.HI 380 080 380 090 380 110 380 120 380 130 380 180 380 190 380 200 380 210 380 220 380 230 Schüco® Series Royal S 75BS.HI 312 840 312 850 Schüco® Series Royal S 75FF.HI 380 640 Page 12 380 660 D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek CDC bracket sets for Mounting solutions for projected top-hung windows, parallel outward opening windows Application for D+H intstallation solutions Arguments Inward opening bottom-hung window Inward opening side-hung window Efficiency •Time-saving installation through optimum adaptation of the bracket set to the particular profile system EN 12101-2 tested • Solution tested as complete system for smoke and heat vent application according to DIN EN 12101-2 Quick fitting • Brackets are ready for immediate fitting – no additional adaptation work on the brackets is necessary Complete scope of supply Please beware CDCare instruction use: check •Attention: All materials necessary foroffixing included for in the scope of pressure load diagramm and mininum sash height / width! supply of the bracket set Product information CDC, 350 housing CDC, 600 housing Type Simple chain detachment Art. no. set • In case of service, the chain can also be detached when the Installation type window is closed Frame material used AD drawing number Documentation • Application drawings suitable for window and facade Components manufacturers available Sash bracket / art. no. Frame bracket / art. no. Cover plate /art. no. Scope of supply Complete, including fixing materials © 2012 D+H Mechatronic AG, Ammersbek D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 13 Series CDC *See the application overview for CDC bracket sets on the reverse for detailed information about the profile series CDC bracket sets for Overview profile series incl. outer frame and sash frame Outer frame profiles Page 14 D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Sash profiles © 2012 D+H Mechatronic AG, Ammersbek CDC bracket sets for Schüco® Series AWS 102 (Sash frame 339 490; 339 470) Application Inward opening Projected top-hung bottom-hung vent window Inward opening Parallel outwardside-hung opening window window · D+H installation solution also functions in combination with the narrower sash profile 339 490 · D+H installation solution also functions in combination with the narrower sash profile 339 490 Attention: Please beware of CDC instruction for use: check pressure load diagramm and mininum sash height / width! Product information CDC, all 350Versions housing Type CDC-BS009-VFO Art. no. set 25.ABE.KS Installation type profile integrated Frame material used aluminium windows AD drawing number AD0046 Components CDC-BS009-VFO Sash bracket / art. no. CDC-SB008 / 25.ABD.KS Frame bracket / art. no. CDC-FB006 / 25.ABC.KS Cover plate /art. no. – Scope of supply CDC, 600 housing Complete, including fixing materials *See the application overview for CDC bracket sets on the reverse for detailed information about the profile series © 2012 D+H Mechatronic AG, Ammersbek D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 15 Series CDC CDC-BS009-VFO CDC bracket sets for Colour option CDC-BS/C (25.ACV.KS) Overview profile series incl. outer frame and sash frame Outer frame Order and profiles delivery Sash profiles RAL colour system order · The RAL colour systems are standards of the RAL institute for colours. Today the „RAL CLASSIC“ system is well-known: This system exists since 1927 and is characterized by 210 differents colours and a four-digit numbering system. Please provide the following information for an order: · Sash bracket and frame bracket will be varnished or powder coated according to RAL colour chart K5. · The colours RAL 9006/9007/9016 and the DB colour 703 are offered with shorter delivery times. · Colour option: Typ: CDC-BS/C, Art.-Nr.: 25.ACV.KS · Type of bracket which should be varnished/powder coated e.g.: CDC-BS034-IFI (see planning aid for searching and finding the appropriate bracket set) · colour (four-digit RAL label) if possible including colour name · Technique (varnish or powder coating) · Quantity · Packaging (single pack or multipack) Product information Colour option CDC bracket Type CDC-BS/C Art. no. Set 25.ACV.KS Colour system RAL Classic K5 (more colours on request) Technique varnish, powder coating Scope of supply same as standard Order example example Type / Art. no. colour option CDC-BS/C / 25.ACV.KS Type CDC-BS034-IFI Colour system RAL 9016 Technique varnish Quantity 100 Packaging Example bracket set CDC-BS034-IFI Remains black Varnished/powder coated components are shown in red for clarification. Screws and splints will not be varnished/powder RAL 9006* coated. RAL 9007* RAL 9016* Component will be varnished/powder coated in RAL xxxx DB 703* Page 16 D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek KA bracket sets for Installation solutions for roof windows Arguments Application for D+H installation solutions Efficiency • Time-saving installation through optimal adaptation of the bracket set for the particular profile • no additional adaptation work on the bracket necessary EN 12101-2 tested • The bracket sets were tested in combination with an automatic SHEV according to DIN EN 12101-2 (classification reports are still being produced in part). Functional safety • Optimum adaptation of the bracket to the particular drive system guarantees complete functional safety Complete of supply Productscope information • All materials necessary for fixing are included in the scope of Type supply of the bracket set Art. no. set Installation type Special colours Frame material • All brackets can be supplied in a special colour as an option, AD drawingtonumber according RAL Classic (colour chart RAL-K5) (wet-painted or powder-coated) Components Documentation Sash bracket / art. no. •Frame Application drawings bracket / art. no.suitable for window and facade manufacturers available Complete, including fixing materials © 2012 D+H Mechatronic AG, Ammersbek D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 17 Series KA Scope of supply KA bracket sets for Schüco® Series Royal S 47D Application Outward opening roof window KA-TW-BS054-VFO KA-BS053-VFO Product information KA KA-TW Type KA-BS053-VFO KA-TW-BS054-VFO Art. no. set 26.ADR.KS 26.ADS.KS Installation type surfaced mounted surfaced mounted Frame material aluminium window aluminium window AD drawing number Ad00141 AD00142 Components KA-BS053-VFO KA-TW-BS054-VFO Sash bracket / art. no. – – Frame bracket / art. no. – – Scope of supply without fixing material Complete, including fixing materials KA-BS053-VFO Page 18 KA-TW-BS054-VFO D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek KA bracket sets for Schüco® Series AWS 57 RO ((outer frame 331 810, 331 820, 369 770, 369 780) Application Outward opening roof window ŸBracket set specially designed for KA-SW, motor mounting bracket designed for especially large forces. KA-BS062-VFO KA-SW-BS063-VFO Product information KA KA-TW KA-SW Type KA-BS062-VFO KA-TW-BS064-VFO KA-SW-BS063-VFO Art. no. set 26.ADY.KS 26.AEA.KS 26.ADZ.KS Installation type surfaced mounted surfaced mounted surfaced mounted Frame material aluminium window aluminium window aluminium window AD drawing number AD00122 AD00123 AD00121 Components KA-BS062-VFO KA-TW-BS064-VFO KA-SW-BS063-VFO Sash bracket / art. no. KA-SB010 / 26.ADW.KS KA-SB010 /2x 26.ADW.KS KA-SB010 /2x 26.ADW.KS Frame bracket / art. no. KA-FB013 / 26.ADX.KS KA-FB013 / 26.ADX.KS KA-FB013 / 26.ADX.KS Scope of supply Complete, including fixing materials KA-BS062-VFO © 2012 D+H Mechatronic AG, Ammersbek KA-TW-BS064-VFO KA-SW-BS063-VFO D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 19 Series KA KA-TW-BS064-VFO KA bracket sets for Schüco® Serie Royal S 88D Application Outward opening roof window ŸBracket set specially designed for KA-SW, motor mounting bracket designed for especially large forces. KA-BS009-VFO KA-SW-BS007-VFO KA-TW-BS027-VFO Product information KA KA-TW KA-SW Type KA-BS009-VFO KA-TW-BS027-VFO KA-SW-BS007-VFO Art. no. set 26.ABF.KS 26.ACF.KS 26.ABB.KS Installation type surfaced mounted surfaced mounted surfaced mounted Frame material aluminium window aluminium window aluminium window AD drawing number AD00079 AD00108 AD00078 Components KA-BS009-VFO KA-TW-BS027-VFO KA-SW-BS007-VFO Sash bracket / art. no. KA-SB004 / 26.AAZ.KS KA-SB004 / 2x 26.AAZ.KS KA-SB004 / 2x 26.AAZ.KS Frame bracket / art. no. KA-FB008 / 26.ABA.KS KA-FB008 / 26.ABA.KS KA-FB008 / 26.ABA.KS Scope of supply Complete, including fixing materials KA-BS009-VFO Page 20 KA-TW-BS027-VFO D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com KA-SW-BS007-VFO © 2012 D+H Mechatronic AG, Ammersbek KA bracket sets for Schüco® Serie Royal S 106D Application Outward opening roof window ŸKonsolensatz speziell für KA-SW, Motormontagewinkel sind für eine besonders hohe Krafteinleitung ausgelegt KA-BS010-VFO KA-SW-BS008-VFO Product information KA KA-TW KA-SW Type KA-BS010-VFO KA-TW-BS028-VFO KA-SW-BS008-VFO Art. no. set 26.ABG.KS 26.ACG.KS 26.ABE.KS Installation type surfaced mounted surfaced mounted surfaced mounted Frame material aluminium window aluminium window aluminium window AD drawing number AD00081 AD00109 AD00080 Components KA-BS010-VFO KA-TW-BS028-VFO KA-SW-BS008-VFO Sash bracket / art. no. KA-SB005 / 26.ABC.KS KA-SB005 / 2x 26.ABC.KS KA-SB005 / 2x 26.ABC.KS Frame bracket / art. no. KA-FB008 / 26.ABA.KS KA-FB008 / 26.ABA.KS KA-FB009 / 26.ABD.KS Scope of supply Complete, including fixing materials KA-BS010-VFO © 2012 D+H Mechatronic AG, Ammersbek KA-TW-BS028-VFO KA-SW-BS008-VFO D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 21 Series KA KA-TW-BS028-VFO KA bracket sets for Installation solutions for top-hung windows Arguments Application for D+H installation solutions Efficiency • Time-saving installation through optimal adaptation of the bracket set for the particular profile • no additional adaptation work on the bracket necessary EN 12101-2 tested • The bracket sets were tested in combination with an automatic SHEV according to DIN EN 12101-2 (classification reports are still being produced in part). Functional safety • Optimum adaptation of the bracket to the particular drive system guarantees complete functional safety Complete scope of supply Product information • All materials necessary for fixing are included in the scope of Type supply of the bracket set Art. no. set Installation type Special colours Frame material • All brackets can be supplied in a special colour as an option, AD drawing to number according RAL Classic (colour chart RAL-K5) (wet-painted or powder-coated) Components Documentation Sash bracket / art. no. • Application Frame bracketdrawings / art. no.suitable for window and facade manufacturers available Scope of supply Page 22 Complete, including fixing materials D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek KA bracket sets for Schüco® Series AWS (exept AWS 102) Application Top-hung window, outwards opening KA-BS036-VFO KA KA-TW Type KA-BS036-VFO KA-TW-BS039-VFO Art. no. set 26.ACS.KS 26.ACV.KS Installation type surfaced mounted surfaced mounted Frame material aluminium window aluminium window AD drawing number AD00139 AD00140 Components KA-BS036-VFO KA-TW-BS039-VFO Sash bracket / art. no. KA-SB013 / 26.AEK.KS KA-SB013 /2x 26.AEK.KS Frame bracket / art. no. KA-FB012 / 26.ACR.KS KA-FB012 / 26.ACR.KS Scope of supply Complete, including fixing materials KA-BS036-VFO © 2012 D+H Mechatronic AG, Ammersbek KA-TW-BS039-VFO D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 23 Series KA Product information KA-TW-BS039-VFO KA bracket sets for Installation solutions for projected top-hung vent, outward opening, and parallel outward opening window Arguments Application for D+H installation solutions Easy installation • Optimal adaptation of the bracket to the particular profile system guarantees high functional safety and simple installation • The bracket sets were tested in combination with an automatic SHEV according to DIN EN 12101-2 (the classification reports are still being produced in part). Design • Even without cladding, the drive blends harmoniously into the appearance of a transom and mullion facade Large opening widths • Depending on the used friction hinges, openings of up to 45° are possible Product information Type Complete scope of supply Art. set • Allno. materials necessary for fixing are included in the scope of supply of the Installation typebracket set Frame material Special colours AD drawing number • All brackets can be supplied in a special colour as an option, according to RAL Classic (colour chart RAL-K5) Components (wet-painted or powder-coated) Sash bracket / art. no. Frame bracket / art. no. Documentation • Application drawings suitable for window and facade manufacturers available Scope of supply Page 24 Complete, including fixing materials D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek KA bracket sets for Schüco® Series AWS 102 SK (sash frame 339 470) Application Projected top-hung vent, outward opening Parallel outward opening window KA-BS001-VFO KA-TW-BS045-VFO KA KA-TW Type KA-BS001-VFO KA-TW-BS045-VFO Art. no. set 26.AAF.KS 26.ADB.KS Installation type surfaced mounted surfaced mounted Frame material aluminium window aluminium window AD drawing number AD00045 AD00133 Components KA-BS001-VFO KA-TW-BS045-VFO Sash bracket / art. no. KA-SB001 / 26.AAA.KS KA-SB001 /2x 26.AAA.KS Frame bracket / art. no. KA-FB002 / 26.AAB.KS KA-FB002 / 26.AAB.KS Scope of supply Complete, including fixing materials KA-BS001-VFO © 2012 D+H Mechatronic AG, Ammersbek KA-TW-BS045-VFO D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 25 Series KA Product information KA-BS001-VFO KA-TW-BS045-VFO KA bracket sets for Schüco® Series AWS 102 SK (sash frame 339 490) Application Projected top-hung vent, outward opening Parallel outward opening window KA-BS051-VFO KA-TW-BS068-VFO Product information KA-BS051-VFO KA-TW-BS068-VFO KA KA-TW Type KA-BS051-VFO KA-TW-BS068-VFO Art. no. set 26.ADJ.KS 26.AEG.KS Installation type surfaced mounted surfaced mounted Frame material aluminium window aluminium window AD drawing number AD00045 AD00133 Components KA-BS051-VFO KA-TW-BS068-VFO Sash bracket / art. no. KA-SB011 / 26.ADH.KS KA-SB011 /2x 26.ADH.KS Frame bracket / art. no. KA-FB002 / 26.AAB.KS KA-FB002 / 26.AAB.KS Scope of supply Complete, including fixing materials KA-BS051-VFO Page 26 KA-TW-BS068-VFO D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek KA bracket sets for Installation solutions for turning sash windows Arguments Application for D+H installation solutions Efficiency • Time-saving installation through optimal adaptation of the bracket set for the particular profile • no additional adaptation work on the bracket necessary EN 12101-2 tested • The bracket sets were tested in combination with an automatic SHEV according to DIN EN 12101-2 (classification reports are still being produced in part). Functional safety • Optimum adaptation of the bracket to the particular drive system guarantees complete functional safety Complete scope of supply Product information • All materials necessary for fixing are included in the scope of Type supply of the bracket set Art. no. set Installation type Special colours Frame material • All brackets can be supplied in a special colour as an option, AD drawing to number according RAL Classic (colour chart RAL-K5) (wet-painted or powder-coated) Components Documentation Sash bracket / art. no. • Application Frame bracketdrawings / art. no.suitable for window and facade manufacturers available Complete, including fixing materials © 2012 D+H Mechatronic AG, Ammersbek D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 27 Series KA Scope of supply KA bracket sets for Schüco® Series AWS (exept Series AWS 102) Application Turning-sash window, inwards opening Ÿmin. space on the frame: 45 mm Ÿmin. space on the frame: 45 mm KA-BS085-VFIS KA-BS085-VFIS DIN-right KA-TW-BS086-VFIS DIN-left Product information KA KA-TW Type KA-BS085-VFIS KA-TW-BS086-VFIS Art. no. set 26.AFL.KS 26.AFM.KS Installation type surfaced mounted surfaced mounted Frame material aluminium window aluminium window AD drawing number AD00143 AD00144 Components KA-BS085-VFIS KA-TW-BS086-VFIS Sash bracket / art. no. – – Frame bracket / art. no. – – Scope of supply Complete, including fixing materials KA-BS085-VFIS Page 28 KA-TW-BS086-VFIS KA-TW-BS086-VFIS D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek KA bracket sets for Colour option KA-BS/C (26.AAV.KS) Order Application and delivery RAL color system order · The RAL colour systems are standards of the RAL institute for colours. Today the „RAL CLASSIC“ system is well-known: This system exists since 1927 and is characterized by 210 differents colours and a four-digit numbering system. Please provide the following information for an order: · Sash bracket and frame bracket will be varnished or powder coated according to RAL color chart K5. · By default the KA bracket sets are delivered as follows: – stainless steel, tumbled – aluminium, nature anodized (similar silver) – cast elements, powder coated similar RAL 9006 · Colour option: Type: KA-BS/C, Art.-No.: 26.AAV.KS · Type of bracket which should be varnished/powder coated e.g.: KABS022-VFO (see planning aid for searching and finding the appropriate bracket set) · colour (four-digit RAL label) if possible including colour name · Technique (varnish or powder coating) · Quantity · Packaging (single pack or multipack) · Price for varnishing/powder coating depends on the number of items which have to be varnished. Product information Colour option KA, KA-TW, KA-SW bracket Type KA-BS/C Art.-No. Set Art. no. set 26.AAV.KS Colour system Installation type RAL Classic K5 (more colors on request) Technique Frame material varnish, powder coating Scope of supply AD drawing number same as standard Components Order example Example Type Art.-No./ color option Sash /bracket art. no. KA-BS/C / 26.AAV.KS Type Frame bracket / art. no. KA-BS022-VFO Colour system RAL 9016 Technique varnish Quantity Packaging Scope of supply 100 Complete, multipack including fixing materials Example bracket set KA-BS022-VFO Varnished/powder coated components are shown in red for clarification. Screws and splints will not be varnished/powder coated. © 2012 D+H Mechatronic AG, Ammersbek D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 29 Series KA Components will be varnished/powder coated in RAL xxxx KA bracket sets for Application Product information Type Art. no. set Installation type Frame material AD drawing number Components Sash bracket / art. no. Frame bracket / art. no. Scope of supply Page 30 Complete, including fixing materials D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek CDP bracket sets for Mounting solutions for roof windows Application for D+H installation solutions Arguments Outward opening roof window, opposite mounted Efficiency • Time-saving installation through optimal adaptation of the bracket set to the particular profile system High strength • Installation solutions designed for maximum load-bearing (up to 1,500N) DIN EN 12101-2 tested • Bracket sets and their installation solutions are in certification Quick fitting • Brackets are ready for immediate installation - no additional adaptation information work on the brackets is necessary Product opposite mounted Type Functional safety Art. no. set • Optimum adaptation of the bracket to the particular drive Drive used CDP; all versions system guarantees complete functional safety Art. no. variant AD drawingscope number Complete of supply • All necessary fixing materials are included in the scope of Components supply of the bracket set Sash bracket / art. no. Frame bracket / art. no. Design bracket / art. no. •Basis Functional design which also satisfies high aesthetic requirements Thread plate / art. no. Adapter bracket / art. no. Special Scope ofcolours supply Complete, including fixing materials • All brackets can be supplied in a special colour as an option, according to RAL Classic (colour chart RAL-K5) (wet-painted or powder-coated) Documentation © 2012 D+H Mechatronic AG, Ammersbek D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 31 Series CDP • Application drawings suitable for window and facade manufacturers available CDP bracket sets for Schüco® Series AWS 57 RO (frame profile 331 810, 331 820) Application Outward opening roof window, opposite mounted Product information opposite mounted Type CDP-BS003-OM Art. no. set 26.CAL.KS Drive used CDP; all versions Art. no. variant 26.CBC.KS AD drawing number AD00244 Components CDP-BS003-OM Sash bracket / art. no. CDP-SB001 / 26.CAA.KS Frame bracket / art. no. CDP-FB003 / 26.CAG.KS Basis bracket / art. no. – Thread plate / art. no. – Adapter bracket / art. no. – Scope of supply Complete, including fixing materials CDP-BS003-OM Page 32 D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek CDP bracket sets for Schüco® Series AWS 57 RO (frame profile 369 770 / 369 780) Application Outward opening roof window, opposite mounted Product information opposite mounted Type CDP-BS001-OM Art. no. set 26.CAJ.KS Drive used CDP; all versions Art. no. variant 26.CBC.KS AD drawing number AD00243 Components CDP-BS001-OM Sash bracket / art. no. CDP-SB001 / 26.CAA.KS Frame bracket / art. no. CDP-FB001 / 26.CAE.KS Basis bracket / art. no. – Thread plate / art. no. – Adapter bracket / art. no. – Scope of supply Complete, including fixing materials © 2012 D+H Mechatronic AG, Ammersbek D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 33 Series CDP CDP-BS001-OM CDP bracket sets for Colour option CDP-BS/C (26.CBC.KS) Application Order and delivery Outward Option opening roof window, opposite mounted Order · You can order the complete bracket set as well as sash bracket, frame bracket and basis bracket as colour option. Please provide the following information for an order: · Colour option: – The RAL color systems are standards of the RAL institute for colours. Today the „RAL CLASSIC“ system is well-known: This system exists since 1927 and is characterized by 210 differents colours and a four-digit numbering system. – Sash bracket, frame bracket and basis bracket will be varnished or powder coated according to RAL colour chart K5. · Type of bracket which should be varnished/powder coated e.g.: CDP-BS004-OM (see planning aid for searching and finding the appropriate bracket set) · Colour option: Type: CDP-BS/C, Art.-No.: 26.CBC.KS · colour (four-digit RAL label) if possible including colour name · Technique (varnish or powder coating) · Quantity · Packaging (single pack or multipack) · Price for varnishing/powder coating depends on the number of items which have to be varnished. Product information Colour option CDP bracket opposite mounted Type CDP-BS/C Art.-No. Set Art. no. set 26.CBC.KS Colour system Drive used CDP;Classic all versions RAL K5 (more colours on request) Technique Art. no. variant varnish, powder coating Scope of supply AD drawing number same as standard Components Order example Example Sash /bracket art. no.option Type Art.-No./ colour CDP-BS/C / 26.CBC.KS Frame bracket / art. no. Type CDP-BS004-OM Basis bracket Colour system/ art. no. RAL 9016 Thread plate / art. no. Technique varnish Adapter bracket / art. no. Quantity 100 Complete, including fixing materials multipack Scope of supply Packaging Example bracket set CDP-BS004-OM Varnished/powder coated components are shown in red for clarification. Screws and splints will not be varnished/powder coated. Components will be varnished/powder coated in RAL xxxx Page 34 D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek ZA bracket sets for Mounting solutions for roof windows Application for D+H installation solutions Arguments Outward opening roof window, opposite mounted Outward opening roof window, side mounted Efficiency • Time-saving installation through optimal adaptation of the bracket set to the particular profile system High strength • Installation solutions designed for maximum load-bearing (up to 1,500N) DIN EN 12101-2 tested • Bracket sets and their installation solutions are tested and certified according to DIN EN12101-2 Quick fitting • Brackets are ready for immediate installation - no additional adaptation information work on the brackets is necessary Product opposite mounted Type Functional safety Art. no. set • Optimum adaptation of the bracket to the particular drive Drive used ZA; all versions system guarantees complete functional safety Art. no. variant side mounted ZA; all versions AD drawingscope number Complete of supply • All necessary fixing materials are included in the scope of Components supply of the bracket set Sash bracket / art. no. Frame bracket / art. no. Design bracket / art. no. •Basis Functional design which also satisfies high aesthetic requirements Thread plate / art. no. Adapter bracket / art. no. Special Scope ofcolours supply Complete, including fixing materials • All brackets can be supplied in a special colour as an option, according to RAL Classic (colour chart RAL-K5) (wet-painted or powder-coated) Documentation © 2012 D+H Mechatronic AG, Ammersbek D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 35 Series ZA • Application drawings suitable for window and facade manufacturers available ZA bracket sets for Schüco® Series AWS 57 RO (frame profile 331 810, 331 820) Application Outward opening roof window, opposite mounted Product information Outward opening roof window, side mounted opposite mounted side mounted Type ZA-BS030-OM ZA-BS031-SM Art. no. set 27.BCR.KS 27.BCP.KS Drive used ZA; all versions ZA; all versions Art. no. variant 27.BAV.KS 27.BAV.KS AD drawing number AD00125 AD00124 Components ZA-BS030-OM ZA-BS031-SM Sash bracket / art. no. ZA-SB019-AWS57RO-OM / 27.BCJ.KS ZA-SB020-AWS57RO-SM / 27.BCK.KS Frame bracket / art. no. ZA-FB007 / 27.BCL.KS ZA-FB007 / 27.BCL.KS Basis bracket / art. no. – – Thread plate / art. no. – – Adapter bracket / art. no. – – Scope of supply Complete, including fixing materials ZA-BS030-OM Page 36 ZA-BS031-SM D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek ZA bracket sets for Schüco® Series AWS 57 RO (frame profile 369 770 / 369 780) Application Outward opening roof window, opposite mounted opposite mounted side mounted Type ZA-BS028-OM ZA-BS029-SM Art. no. set 27.BCM.KS 27.BCN.KS Drive used ZA; all versions ZA; all versions Art. no. variant 27.BAV.KS 27.BAV.KS AD drawing number AD00127 AD00126 Components ZA-BS028-OM ZA-BS029-SM Sash bracket / art. no. ZA-SB019-AWS57RO-OM / 27.BCJ.KS ZA-SB020-AWS57RO-SM / 27.BCK.KS Frame bracket / art. no. ZA-FB005 / 27.BBM.KS ZA-FB005 / 27.BBM.KS Basis bracket / art. no. – – Thread plate / art. no. – – Adapter bracket / art. no. – – Scope of supply ZA-BS028-OM © 2012 D+H Mechatronic AG, Ammersbek Complete, including fixing materials ZA-BS029-SM D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 37 Series ZA Product information Outward opening roof window, side mounted ZA bracket sets for Schüco® Series Royal S 88D Application Outward opening roof window, opposite mounted Outward opening roof window, side mounted · The thread plate (see red circle) of the frame bracket must first be inserted into the space of the profile and appropriately fixed before assembly of the sash frame parts. For more detailled information on assembly, please refer to the D+H application drawings. · The thread plate (see red circle) of the frame bracket must first be inserted into the space of the profile and appropriately fixed before assembly of the sash frame parts. For more detailled information on assembly, please refer to the D+H application drawings. Product information opposite mounted side mounted Type ZA-BS010-OM ZA-BS009-SM Art. no. set 27.BBC.KS 27.BAT.KS Drive used ZA; all versions ZA; all versions Art. no. variant 27.BAV.KS 27.BAV.KS AD drawing number AD00099 AD00098 Components ZA-BS010-OM ZA-BS009-SM Sash bracket / art. no. ZA-SB009-RS88D-OM / 27.BBA.KS ZA-SB010-RS88D-SM / 27.BBB.KS Frame bracket / art. no. ZA-FB003-OM / 27.BAN.KS – Basis bracket / art. no. – ZA-BB001-SM / 27.BAC.KS Thread plate / art. no. – – Adapter bracket / art. no. – AB001-RS88D-SM / 27.CMA.KS Scope of supply Complete, including fixing materials ZA-BS010-OM Page 38 ZA-BS009-SM D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek ZA bracket sets for Schüco® Series Royal S 106D Application Outward opening roof window, opposite mounted Outward opening roof window, side mounted · The thread plate (see red circle) of the frame bracket must first be inserted into the space of the profile and appropriately fixed before assembly of the sash frame parts. For more detailled information on assembly, please refer to the D+H application drawings. · The thread plate (see red circle) of the frame bracket must first be inserted into the space of the profile and appropriately fixed before assembly of the sash frame parts. For more detailled information on assembly, please refer to the D+H application drawings. opposite mounted side mounted Type ZA-BS012-OM ZA-BS011-SM Art. no. set 27.BBE.KS 27.BBD.KS Drive used ZA; all versions ZA; all versions Art. no. variant 27.BAV.KS 27.BAV.KS AD drawing number AD00101 AD00100 Components ZA-BS012-OM ZA-BS011-SM Sash bracket / art. no. ZA-SB003-RS106D-OM / 27.BAW.KS ZA-SB004-RS106D-SM / 27.BAX.KS Frame bracket / art. no. ZA-FB003-OM / 27.BAN.KS ZA-FB004-SM / 27.BAS.KS Basis bracket / art. no. – – Thread plate / art. no. – – Adapter bracket / art. no. – – Scope of supply ZA-BS012-OM © 2012 D+H Mechatronic AG, Ammersbek Complete, including fixing materials ZA-BS011-SM D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 39 Series ZA Product information ZA bracket sets for Colour option ZA-BS/C (27.BAV.KS) Application Order and delivery Outward Option opening roof window, opposite mounted Outward Order opening roof window, side mounted · You can order the complete bracket set as well as sash bracket, frame bracket and basis bracket as colour option. Please provide the following information for an order: · Colour option: – The RAL color systems are standards of the RAL institute for colours. Today the „RAL CLASSIC“ system is well-known: This system exists since 1927 and is characterized by 210 differents colours and a four-digit numbering system. – Sash bracket, frame bracket and basis bracket will be varnished or powder coated according to RAL colour chart K5. · Type of bracket which should be varnished/powder coated e.g.: ZABS004-OM (see planning aid for searching and finding the appropriate bracket set) · Colour option: Type: ZA-BS/C, Art.-No.: 27.BAV.KS · colour (four-digit RAL label) if possible including colour name · Technique (varnish or powder coating) · Quantity · Packaging (single pack or multipack) · Price for varnishing/powder coating depends on the number of items which have to be varnished. Product information Colour option ZA bracket opposite mounted Type ZA-BS/C Art.-No. Set Art. no. set 27.BAV.KS side mounted Colour system Drive used ZA; all versions RAL Classic K5 (more colors on request) Technique Art. no. variant varnish, powder coating Scope of supply AD drawing number same as standard Components Order example Example Sash /bracket art. no.option Type Art.-No./ colour ZA-BS/C / 27.BAV.KS Frame bracket / art. no. Type ZA-BS004-OM Basis bracket Colour system/ art. no. RAL 9016 Thread plate / art. no. Technique varnish Adapter bracket / art. no. Quantity 100 Complete, including fixing materials multipack Scope of supply Packaging ZA; all versions Example bracket set ZA-BS004-OM Varnished/powder coated components are shown in red for clarification. Screws and splints will not be varnished/powder coated. Components will be varnished/powder coated in RAL xxxx Page 40 D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek SXD bracket sets for Mounting solutions for roof windows Application for D+H installation solutions Arguments Outward opening roof window, opposite mounted Outward opening roof window, side mounted Efficiency • Time-saving installation through optimal adaptation of the bracket set to the particular profile system High strength • Installation solutions designed for maximum load-bearing (up to 1,500N) Quick fitting • Brackets are ready for immediate installation - no additional adaptation work on the brackets is necessary Functional safety • Optimum adaptation of the bracket to the particular drive system guarantees complete functional safety Product information opposite mounted Type Complete scope of supply Art. no. set • All necessary fixing materials are included in the scope of Drive used SXD; all versions supply of the bracket set Art. no. variant side mounted SXD; all versions AD drawing number Design • Functional design which also satisfies high aesthetic Components requirements Sash bracket / art. no. Frame bracket / art. no. Special colours bracketcan / art.beno. •Basis All brackets supplied in a special colour as an option, according to /RAL Classic (colour chart RAL-K5) Thread plate art. no. (wet-painted or powder-coated) Adapter bracket / art. no. Documentation © 2012 D+H Mechatronic AG, Ammersbek D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 41 Series SXD • Application drawings suitable for window and facade manufacturers available SXD bracket sets for Schüco® Series AWS 57 RO (frame profile 331 820) Application Outward opening roof window, opposite mounted Product information Outward opening roof window, side mounted opposite mounted side mounted Type SXD-BS002-OM SXD-BS001-SM Art. no. set 27.CAL.KS 27.CAK.KS Drive used SXD; all versions SXD; all versions Art. no. variant 27.CAV.KS 27.CAV.KS AD drawing number AD00158 AD00157 Components SXD-BS002-OM SXD-BS001-SM Sash bracket / art. no. ZA-SB019-AWS57RO-OM / 27.BCJ.KS ZA-SB020-AWS57RO-SM / 27.BCK.KS Frame bracket / art. no. SXD-FB006 / 27.CAF.KS SXD-FB006 / 27.CAF.KS Basis bracket / art. no. – – Thread plate / art. no. – – Adapter bracket / art. no. – – SXD-BS002-OM Page 42 SXD-BS001-SM D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek SXD bracket sets for Schüco® Series AWS 57 RO (frame profile 369 780) Application Outward opening roof window, opposite mounted opposite mounted side mounted Type SXD-BS004-OM SXD-BS003-SM Art. no. set 27.CAN.KS 27.CAM.KS Drive used SXD; all versions SXD; all versions Art. no. variant 27.CAV.KS 27.CAV.KS AD drawing number AD00160 AD00159 Components SXD-BS004-OM SXD-BS003-SM Sash bracket / art. no. ZA-SB019-AWS57RO-OM / 27.BCJ.KS ZA-SB020-AWS57RO-SM / 27.BCK.KS Frame bracket / art. no. SXD-FB004 / 27.CAD.KS SXD-FB004 / 27.CAD.KS Basis bracket / art. no. – – Thread plate / art. no. – – Adapter bracket / art. no. – – SXD-BS004-OM © 2012 D+H Mechatronic AG, Ammersbek SXD-BS003-SM D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 43 Series SXD Product information Outward opening roof window, side mounted SXD bracket sets for Schüco® Series Royal S 88D Application Outward opening roof window, opposite mounted Outward opening roof window, side mounted · The thread plate (see red circle) of the frame bracket must first be inserted into the space of the profile and appropriately fixed before assembly of the sash frame parts. For more detailled information on assembly, please refer to the D+H application drawings. · The thread plate (see red circle) of the frame bracket must first be inserted into the space of the profile and appropriately fixed before assembly of the sash frame parts. For more detailled information on assembly, please refer to the D+H application drawings. Product information opposite mounted side mounted Type SXD-BS006-OM SXD-BS005-SM Art. no. set 27.CAR.KS 27.CAP.KS Drive used SXD; all versions SXD; all versions Art. no. variant 27.CAV.KS 27.CAV.KS AD drawing number AD00162 AD00161 Components SXD-BS006-OM SXD-BS005-SM Sash bracket / art. no. ZA-SB009-RS88D-OM / 27.BBA.KS ZA-SB010-RS88D-SM / 27.BBB.KS Frame bracket / art. no. SXD-FB002 / 27.CAB.KS – Basis bracket / art. no. – SXD-BB001 / 27.CAH.KS Thread plate / art. no. – – Adapter bracket / art. no. – AB001-RS88D-SM / 27.CMA.KS SXD-BS006-OM Page 44 SXD-BS005-SM D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek SXD bracket sets for Schüco® Series Royal S 106D Application Outward opening roof window, opposite mounted Outward opening roof window, side mounted · The thread plate (see red circle) of the frame bracket must first be inserted into the space of the profile and appropriately fixed before assembly of the sash frame parts. For more detailled information on assembly, please refer to the D+H application drawings. · The thread plate (see red circle) of the frame bracket must first be inserted into the space of the profile and appropriately fixed before assembly of the sash frame parts. For more detailled information on assembly, please refer to the D+H application drawings. opposite mounted side mounted Type SXD-BS008-OM SXD-BS007-SM Art. no. set 27.CAT.KS 27.CAS.KS Drive used SXD; all versions SXD; all versions Art. no. variant 27.CAV.KS 27.CAV.KS AD drawing number AD00164 AD00163 Components SXD-BS008-OM SXD-BS007-SM Sash bracket / art. no. ZA-SB003-RS106D-OM / 27.BAW.KS ZA-SB004-RS106D-SM / 27.BAX.KS Frame bracket / art. no. SXD-FB002 / 27.CAB.KS SXD-FB003 / 27.CAC.KS Basis bracket / art. no. – – Thread plate / art. no. – – Adapter bracket / art. no. – – SXD-BS008-OM © 2012 D+H Mechatronic AG, Ammersbek SXD-BS007-SM D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 45 Series SXD Product information SXD bracket sets for Colour option SXD-BS/C (27.CAV.KS) Application Order and delivery Option Outward opening roof window, opposite mounted Order Outward opening roof window, side mounted · You can order the complete bracket set as well as sash bracket, frame bracket and basis bracket as colour option. Please provide the following information for an order: · Colour option: – The RAL color systems are standards of the RAL institute for colours. Today the „RAL CLASSIC“ system is well-known: This system exists since 1927 and is characterized by 210 differents colours and a four-digit numbering system. – Sash bracket, frame bracket and basis bracket will be varnished or powder coated according to RAL colour chart K5. · Type of bracket which should be varnished/powder coated e.g.: SXD-BS019-OM (see planning aid for searching and finding the appropriate bracket set) · Colour option: Type: SXD-BS/C, Art.-No.: 27.CAV.KS · colour (four-digit RAL label) if possible including colour name · Technique (varnish or powder coating) · Quantity · Packaging (single pack or multipack) · Price for varnishing/powder coating depends on the number of items which have to be varnished. Product information Colour option SXD bracket opposite mounted Type Type SXD-BS/C Art.-No. Set Art. no. set 27.CAV.KS side mounted Colour system Drive used SXD;Classic all versions RAL K5 (more colors on request) Technique Art. no. variant varnish, powder coating Scope of supply AD drawing number same as standard Components Order example Example Sash /bracket art. no.option Type Art.-No./ colour SXD-BS/C / 27.CAV.KS Frame bracket / art. no. Type SXD-BS019-OM Basis bracket Colour system/ art. no. RAL 9016 Thread plate / art. no. Technique varnish Adapter bracket / art. no. Quantity 100 Packaging multipack SXD; all versions Example bracket set SXD-BS019-OM Varnished/powder coated components are shown in red for clarification. Screws and splints will not be varnished/powder coated. Components will be varnished/powder coated in RAL xxxx Page 46 D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek DXD bracket sets for Mounting solutions for roof windows Application for D+H installation solutions Arguments Outward opening roof window, opposite mounted Outward opening roof window, side mounted Efficiency • Time-saving installation through optimal adaptation of the bracket set to the particular profile system High strength • Installation solutions designed for maximum load-bearing (up to 3000N) EN 12101-2 tested • Bracket sets and their fitting solutions are tested and certified according to EN12101-2 Quick fitting • Brackets are ready for immediate installation - no additional adaptation work on the brackets is necessary Product information opposite mounted Functional safety Type • Optimum adaptation of the bracket to the particular drive Art. no. set system guarantees complete functional safety Drive used DXD; all versions Art. no. variant 27.AAV.KS Complete scope of supply AD drawing number • All necessary fixing materials are included in the scope of side mounted DXD; all versions 27.AAV.KS supply of the bracket set Components Sash bracket / art. no. Design bracket / art.which no. also satisfies high aesthetic •Frame Functional design requirements Basis bracket /art. no. Thread plate / art. no. Special Support colours spindle / art. no. •Scope All brackets can be supplied in a special colour as an option, of supply Complete, including fixing materials according to RAL Classic (colour chart RAL-K5) (wet-painted or powder-coated) Documentation © 2012 D+H Mechatronic AG, Ammersbek D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 47 Series DXD • Application drawings suitable for window and facade manufacturers available DXD bracket sets for Schüco® Series AWS 57 RO (sash profile 331 810, 331 820) Application Outward opening roof window, opposite mounted Product information Outward opening roof window, side mounted opposite mounted side mounted Type DXD-BS028-OM DXD-BS029-SM Art. no. set 27.ACW.KS 27.ACX.KS Drive used DXD; all versions DXD; all versions Art. no. variant 27.AAV.KS 27.AAV.KS AD drawing number AD00129 AD00128 Components DXD-BS028-OM DXD-BS029-SM Sash bracket / art. no. DXD-SB015-OM / 27.AAW.KS DXD-SB037-SM / 27.ACV.KS Frame bracket / art. no. DXD-FB010-OM / 27.ACY.KS DXD-FB003-SM / 27.ABR.KS Basis bracket /art. no. – – Thread plate / art. no. – – Support spindle / art. no. 37mm / 27.AZZ.KS 75mm / 27.AZX.KS Scope of supply Complete, including fixing materials DXD-BS028-OM Page 48 DXD-BS029-SM D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek DXD bracket sets for Schüco® Series AWS 57 RO (sash profile 369 770, 369 780) Application Outward opening roof window, opposite mounted opposite mounted side mounted Type DXD-BS028-OM DXD-BS029-SM Art. no. set 27.ACW.KS 27.ACX.KS Drive used DXD; all versions DXD; all versions Art. no. variant 27.AAV.KS 27.AAV.KS AD drawing number AD00131 AD00130 Components DXD-BS028-OM DXD-BS029-SM Sash bracket / art. no. DXD-SB015-OM / 27.AAW.KS DXD-SB037-SM / 27.ACV.KS Frame bracket / art. no. DXD-FB010-OM / 27.ACY.KS DXD-FB003-SM / 27.ABR.KS Basis bracket /art. no. – – Thread plate / art. no. – – Support spindle / art. no. 37mm / 27.AZZ.KS 75mm / 27.AZX.KS Scope of supply Complete, including fixing materials DXD-BS028-OM © 2012 D+H Mechatronic AG, Ammersbek DXD-BS029-SM D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 49 Series DXD Product information Outward opening roof window, side mounted DXD bracket sets for Schüco® Series Royal S 88D Application Outward opening roof window, opposite mounted Outward opening roof window, side mounted · The thread plate (see red circle) of the frame bracket must first be inserted into the space of the profile and appropriately fixed before assembly of the sash frame parts. For more detailled information on assembly, please refer to the D+H application drawings. · The thread plate (see red circle) of the frame bracket must first be inserted into the space of the profile and appropriately fixed before assembly of the sash frame parts. For more detailled information on assembly, please refer to the D+H application drawings. Product information opposite mounted side mounted Type DXD-BS007-OM DXD-BS008-SM Art. no. set 27.ABD.KS 27.ABF.KS Drive used DXD; all versions DXD; all versions Art. no. variant 27.AAV.KS 27.AAV.KS AD drawing number AD00005 AD00004 Components DXD-BS007-OM DXD-BS008-SM Sash bracket / art. no. DXD-SB005-RS88D-OM / 27.AAN.KS DXD-SB007-RS88D-SM / 27.AAL.KS Frame bracket / art. no. – – Basis bracket /art. no. DXD-BB001-OM / 27.AAA.KS DXD-BB003-SM / 27.AAE.KS Thread plate / art. no. – – Adapter Support bracket spindle // art art.no. no. – AB001-RS88D-SM / 27.CMA.KS Scope of supply Complete, including fixing materials DXD-BS007-OM Page 50 DXD-BS008-SM D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek DXD bracket sets for Schüco® Series Royal S 106D Application Outward opening roof window, opposite mounted Outward opening roof window, side mounted · The thread plate (see red circle) of the frame bracket must first be inserted into the space of the profile and appropriately fixed before assembly of the sash frame parts. For more detailled information on assembly, please refer to the D+H application drawings. · The thread plate (see red circle) of the frame bracket must first be inserted into the space of the profile and appropriately fixed before assembly of the sash frame parts. For more detailled information on assembly, please refer to the D+H application drawings. opposite mounted side mounted Type DXD-BS005-OM DXD-BS006-SM Art. no. set 27.AAP.KS 27.AAR.KS Drive used DXD; all versions DXD; all versions Art. no. variant 27.AAV.KS 27.AAV.KS AD drawing number AD00003 AD00002 Components DXD-BS005-OM DXD-BS006-SM Sash bracket / art. no. DXD-SB001-RS106D-OM / 27.AAD.KS DXD-SB003-RS106D-SM / 27.AAF.KS Frame bracket / art. no. – – Basis bracket /art. no. DXD-BB001-OM / 27.AAA.KS DXD-BB003-SM / 27.AAE.KS Thread plate / art. no. – – Support spindle / art. no. – – Scope of supply Complete, including fixing materials DXD-BS005-OM © 2012 D+H Mechatronic AG, Ammersbek DXD-BS006-SM D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com Page 51 Series DXD Product information DXD bracket sets for Colour option DXD-BS/C (27.AAV.KS) Order and delivery Application Option opening roof window, opposite mounted Outward Order opening roof window, side mounted Outward · You can order the complete bracket set as well as sash bracket, frame bracket and basis bracket as colour option. Please provide the following information for an order: · Colour option: – The RAL color systems are standards of the RAL institute for colours. Today the „RAL CLASSIC“ system is well-known: This system exists since 1927 and is characterized by 210 differents colours and a four-digit numbering system. – Sash bracket, frame bracket and basis bracket will be varnished or powder coated according to RAL colour chart K5. · Type of bracket which should be varnished/powder coated e.g.: DXD-BS012-OM (see planning aid for searching and finding the appropriate bracket set) · Colour option: Type: DXD-BS/C, Art.-No.: 27.AAV.KS · colour (four-digit RAL label) if possible including colour name · Technique (varnish or powder coating) · Quantity · Packaging (single pack or multipack) · Price for varnishing/powder coating depends on the number of items which have to be varnished. Product information Colour option DXD bracket opposite mounted Type Art.-No. Set Art. no. set DXD-BS/C side mounted 27.AAV.KS RAL Classic K5 (more colors on request) DXD; all versions Colour system Drive used Technique Art. no. variant Scope of supply AD drawing number varnish, powder coating 27.AAV.KS same as standard Order example Components Example Type /bracket Art.-No./ art. colour Sash no.option DXD-BS/C / 27.AAV.KS Type bracket / art. no. Frame DXD-BS012-SM Colourbracket system/art. no. Basis RAL 9016 Technique Thread plate / art. no. varnish Quantity spindle / art. no. Support 100 Packaging Scope of supply Complete, including fixing materials multipack DXD; all versions 27.AAV.KS Example bracket set DXD-BS012-OM Varnished/powder coated components are shown in red for clarification. Screws and splints will not be varnished/powder coated. Components will be varnished/powder coated in RAL xxxx Page 52 D+H Mechatronic AG · Georg-Sasse-Straße 28-32 · D-22949 Ammersbek/Hamburg · Germany Phone: +49 40 60565-0 · Fax: +49 40 60565-222 · [email protected] · www.dh-partner.com © 2012 D+H Mechatronic AG, Ammersbek WWW.DH-PARTNER.COM © 2012 D+H Mechatronic AG, Ammersbek_99.760.43, 1.0/07/12 D+H Mechatronic AG Georg-Sasse-Straße 28-32 D-22949 Ammersbek Germany Tel: +49 40 60565 0 Fax:+49 40 60565 222 E-Mail: [email protected]
© Copyright 2024