Kaltfräse W 200 Surface Miner 2500 SM Technische Daten Technical specifi cation

Technische
Technical
specifi
Daten
cation
KaltfräseMiner
Surface
W 200
2500 SM
Technical specification
Surface miner 2500 SM
Cutting drum
Cutting width, max.
2,500 mm
Cutting depth *
0 – 600 mm
Number of cutting tools
Depending on application
Drum diameter with tools
1,500 mm
Drum inclination max.
4°
Engine
Engine manufacturer
Cummins
Type
QST 30
CoolingWater
Number of cylinders
12
Rated power
783 kW / 1,050 HP / 1,065 PS
Engine speed
2,100 min-1
Displacement
30,500 cm3
Fuel consumption, full load
191.5 l / h
2
127.6 l / h
Fuel consumption, /3 load
Driving performance
Operating speed
0 to 25 m / min
Travel speed
0 to 3.9 km / h
Theoretical gradeability
20 %
Lateral inclination, max.
8%
Crawler tracks
Crawler tracks, front (L x W x H)
2,920 x 400 x 970 mm
Crawler tracks, rear (L x W x H)
2,920 x 400 x 970 mm
Filling capacities
Fuel tank
2,400 l
Hydraulic oil tank
500 l
Water tank
2,800 l
Electrical system
Control system
24 V
Lighting system
24 V
Conveyor system
Belt width of primary conveyor
1,400 mm
Belt width of discharge conveyor
1,400 mm
Shipping dimensions for overland transport
Packing unit No. 1:
Module 1 (machine frame, track units, engine station, primary conveyor, 12,800 x 3,470 x 3,400 mm
operator’s cabin) (L x W x H)
Packing unit No. 2:
Module 2 (slewing ring, conveyor suspension, counterweight, transport box 15,700 x 2,750 x 3,400 mm
with various attachment parts) and module 3 (discharge conveyor) (L x W x H)
Shipping dimensions for sea transport
Packing unit No. 1:
Module 1 (machine frame, track units, engine station, primary conveyor, 12,800 x 3,470 x 3,400 mm
operator’s cabin) (L x W x H)
Packing unit No. 2:
Module 2 (slewing ring, conveyor suspension, counterweight, transport box 6,400 x 2,700 x 3,350 mm
with various attachment parts) (L x W x H)
Packing unit No. 3:
12,300 x 2,300 x 1,700 mm
Module 3 (discharge conveyor) (L x W x H)
* = The maximum cutting depth may deviate from the value indicated due to tolerances and wear.
Dimensions in mm
4,935
11,3
00
5,195
970
2,920
3,545
R8
,50
0
8,740
°
3,470
39°
1,840
400
90
1,900
4,300 – 7,500
22,700
2 // 3
Transport modules of surface miner 2500 SM for transport by land
Dimensions in mm
Packing unit No. 1: Module 1 (machine frame, track units, engine station, primary conveyor, operator’s cabin)
3,400
12,800
11,800
Packing unit No. 2: Module 2 (slewing ring, conveyor suspension, counterweight, transport box with various attachment parts)
and module 3 (discharge conveyor)
3,400
15,700
Transport modules of surface miner 2500 SM for sea transport
Dimensions in mm
Packing unit No. 1: Module 1 (machine frame, track units, engine station, primary conveyor, operator’s cabin)
3,400
12,800
Packing unit No. 2: Module 2 (slewing ring, conveyor suspension, counterweight, transport box with various attachment parts)
3,350
6,400
Packing unit No. 3: Module 3 (discharge conveyor)
1,700
12,300
4 // 5
Machine weights
surface miner 2500 SM
Empty weight of machine in standard design without filling media 109,100 kg
Operating weight, CE *
111,600 kg
Operating weight, max. (full tanks, full range of equipment)
118,000 kg
Weights of filling media
Water tank filling in kg
2,800 kg
Diesel tank filling in kg (0.83 kg / l)
1,992 kg
Weights of shipping modules
Overland transport
Weight of packing unit No. 1: Module 1 (machine frame, track units,
engine station, primary conveyor, operator’s cabin)
82,850 kg
Weight of packing unit No. 2: Module 2 (slewing ring, conveyor suspension,
counterweight, transport box with various attachment parts) and module 3 (discharge conveyor)
28,450 kg
Sea transport
Weight of packing unit No. 1: Module 1 (machine frame, track units,
engine station, primary conveyor, operator’s cabin)
82,850 kg
Weight of packing unit No. 2: Module 2 (slewing ring, conveyor suspension,
counterweight, transport box with various attachment parts)
23,800 kg
Weight of packing unit No. 3: Module 3 (discharge conveyor)
4,650 kg
* = Machine in standard design, half-full water tank, half-full fuel tank, driver (75 kg), on-board tools.
Equipment features of surface miner 2500 SM
Standard equipment:
Optional equipment:
Basic machine with engine
Basic machine with engine
Rigid welded design with integrated tanks for fuel, water and
hydraulic oil
Standard painting in Wirtgen white with orange stripes
Fold-down cabin for transport
Cutting drum housing
Cutting drum housing for cutting width 2,500 mm, excluding
FCS features
Hydraulically lifting side plates
Water spray bar in drum housing
Cutting drums
Cutting drum, cutting width 2,500 mm, HT15, tool spacing
45 mm, drum diameter with tools 1,500 mm
Loading of cut material
Discharge conveyor, 11.30 m long
Water spray bar at slewing ring and discharge conveyor
Continuously adjustable belt speeds
Belt tension of discharge conveyor is maintained via grease
cylinders
Machine and levelling control
Clearly structured main control panel with functional switches
integrated in driver’s seat
LEVEL PRO automatic levelling system including control panel
and wire-rope sensors for cutting depth adjustment mounted
at the side plates, left and right
Operator’s platform
Individually adjustable, rotating comfort driver’s seat
Two mirrors, front
Air-conditioning system
Chassis and height adjustment
Four full-floating track units suspended from parallelogram
guides
Track units with double grouser track pads
Four-track steering with three selectable steering modes
Track units are driven via planetary gearbox with hydraulic
motor each
Separate hydraulic variable displacement pumps for the front
and rear track units
Continuously adjustable advance speeds from zero to maximum
speed in both operating and travel gear
Height adjustment via hydraulic cylinders
Miscellaneous
Lighting package including 10 Xenon working lights plus
1 halogen working light for walkway
Tested FOPS cabin roof with access
Special painting in one, two or several colours
Hydraulically operated water tank filling pump
Hydraulically operated high-pressure water cleaner
Additional water tank, 1,000 l, in filling funnel design
Hydraulically operated cutting tool extractor
Diesel fuel quick-filling system
Cutting drums
Cutting drum, cutting width 2,500 mm, HT14,
tool spacing 45 mm, drum diameter with tools 1,400 mm
Cutting drum, cutting width 2,500 mm, HT14,
tool spacing 45 mm, drum diameter with tools 1,500 mm
Cutting drum, cutting width 2,500 mm, HT14,
tool spacing 45 mm, drum diameter with tools 1,400 mm,
in armoured design
Cutting drum, cutting width 2,500 mm, HT15,
tool spacing 45 mm, drum diameter with tools 1,500 mm,
in armoured design
Consult factory for special drums customized to specific
applications
Loading of cut material
Cut material is deposited in a windrow between the rear
track units
Operator’s platform
Screen system including two cameras and display on two
additional screens
Miscellaneous
Fire-extinguishing system
Central lubrication system
Two additional Xenon working lights at discharge conveyor
20-ft. workshop container including workbench and
cabinets / shelves
Extended tool kit
Reversing lights
12-V power supply
6 // 7
Wirtgen GmbH
Reinhard-Wirtgen-Strasse 2 · 53578 Windhagen · Germany
Phone: +49 (0) 26 45 / 131-0 · Fax: +49 (0) 26 45 / 131 - 242
Internet: www.wirtgen.com · E-Mail: [email protected]
Illustrations are without obligation. Technical details are subject to change without notice.
Performance data depend upon operating conditions. – No. 2176459 26-20 EN-01/12 © by Wirtgen GmbH 2012. Printed in Germany