Control Center Cameras Other System C•CURE 800/8000 Controller Integration Integration Module & C•CURE 800/8000 Server Recording Software House® C•CURE 800/8000 Integration The IndigoVision Software House C•CURE 800/8000 Integration Module allows events and alarms from Software House C•CURE 800/8000 systems to be forwarded into IndigoVision Video and Alarm Management systems. In addition, events and alarms from IndigoVision systems can be fed back into Software House systems. This creates a tightly integrated access control and CCTV monitoring system. With the IndigoVision Integration Module, any Software House events can trigger a wide range of actions within the IndigoVision system. This includes starting recordings on an IndigoVision Network Video Recorder, displaying live video from cameras on monitors and IndigoVision Control Center viewing panes, moving PTZ cameras to specific locations or sending notification emails. All Software House events appear within the IndigoVision Alarm Log and can, for example, be viewed when playing back recordings in Control Center. The C•CURE 800/8000 Server requires a Software House Real-Time API Licence. The IndigoVision Integration Module is installed on the same machine as the C•CURE 800/8000 Access Control Software. Powerful and flexible configuration is carried out through a simple text file. In conjunction with the C•CURE 800/8000 Access Control Server, the IndigoVision Integration Module integrates with and is compatible with the following Software House applications and hardware: iStar eX Controller iStar Pro Enterprise Controller apC/8x Alarm Management Panels apC/L Alarm Management Panels Lantronix Device Server Other devices such as fire alarms, intercoms, burglar and other alarms Specification & Requirements Control Center and NVR versions 3.x Control Center Software House System Software Requirements: C•CURE 800/8000 Software v8.3 or C•CURE 800/8000 Software v9.1 or C•CURE 800/8000 Software v9.3 Software House Real-Time API Licence C•CURE 800/8000 Software v9.4, v10.0, v10.2 or v10.3 Software House Real-Time API Licence IndigoVision System Software Requirements: IndigoVision C•CURE 8.3 Integration Module or IndigoVision C•CURE 9.1 Integration Module or IndigoVision C•CURE 9.3 Integration Module IndigoVision C•CURE 800/8000 Integration Module v2.2 Compatible with SMS4TM r2 / Control Center v11.0 or later The IndigoVision C•CURE 8.3 Integration Module only supports one-way events from the Software House system into the IndigoVision system. Other versions support two-way events. Integration Server Specification: PC requirements for C•CURE 800/8000 vary. Refer to C•CURE 800/8000 documentation for advice on machine specifications. The IndigoVision Software House Integration Module runs on the same PC as C•CURE 800/8000. There are no extra requirements on the specification of the PC due to the IndigoVision software. NOTE: The Integration Module is a licenced product. A correctly licenced USB dongle should be present on the platform running the Integration Module. The Integration Module should not be run on the same server as any other dongle licenced IndigoVision software such as the Windows NVR. Supported Operating Systems for C•CURE 800/8000 and IndigoVision software are: Microsoft Windows Server 2003 Microsoft Windows XP Professional Microsoft Windows 7 Microsoft Windows Server 2008 R2 Software House Events and IndigoVision Actions Supported: The IndigoVision Software House Integration Module is written in a general way so that it can easily be configured to recognise any C•CURE 800/8000 events. Examples of C•CURE 800/8000 events supported are: Event and Alarm Monitoring Local/Global Anti-Passback within a Cluster Elevator Control Muster/De-muster Alternate and Extended Shunt by Door Escort Management Intrusion Zones/Keypad Commands Occupancy Restrictions C•CURE ID Badging Solution Biometric Support Visitor Management Systems Asset Management and Hands free Access Control Cardholder Access Events Advanced Door Monitoring Carpool anti-passback Any of the above events or systems can trigger any of the following actions within the IndigoVision IP Video system: PTZ Camera moves to Preset Video from one or more cameras displayed on operator’s PC Notification email sent Video from any camera displayed on an analog monitor Recording of any camera started CCTV site map pops up with event source highlighted Two way audio connection established so operator can listen and talk to the source of the event Relay triggered action initiated e.g. door opens or lights turn on ID: IV-SHBM 14.1 SEP 14
© Copyright 2024