SPECTRUM FATIGUE CC T/A IFATIGUE Product : MR688-GPS-RAM V3 Professional Importer & Distributor : Spectrum Fatigue cc Facts & Information : • iFatigue RavTrackPc real time Fatigue monitoring • Real Time Fatigue monitoring for commercial market • MR688 can Interface with any FMS system • Product is reliable, small, easy to use • Can be used as a stand alone Fatigue monitoring system 1 MR688-GPS-RAM V3 PROFESSIONAL • The MR688-V3 Driver Fatigue Monitor Professional Version • Introduced to the South African Market in 2010. • Operational in the Opencast Mining environment • RAM Mounted on the dashboard of the Vehicle • The MR688 operates between 8 and 32vdc • Detects Fatigue and the Eyes of the operator • Digital outputs for Fatigue and Eye detection • Pre set Fatigue start up speed setting • Over speed alarm setting 2 HOW THE MR688 FUNCTIONS • The MR688 Detects and Analyze the Operator for Fatigue before they fall asleep. • The MR688 will make a sharp warning to warn the driver before falling into sleep. • The Fatigue alert can be sent to the Control Room via the digital output of the monitor to the FMS system. • When the driver is alarmed by the monitor, the driver should stop driving immediately and have a rest. • Eye Detection and Fatigue Alerts combined, ensure accurate information on any vehicle in the system iFatigue.com 3 SYSTEM CONFIGURATION • Speed activation to Monitor for Fatigue from 10km/h • Eye detection always Active when switched On • 2 x Digital Outputs on MR688-F1-Gps ( Fatigue / Face ) • Driver Fatigue Alerts, Eye Detection and over speeding can be monitored by the device • Over speed Alert setting can be pre programmed iFatigue.com 4 MR688-GPS-RAM MOUNTING POSITION • The MR688-GPS-RAM can be mounted on the dashboard in the front, to the Left or to Right of the Steering wheel • When mounted with the RAM mount bracket, it can be adjusted for ease of use at a suitable height and position in relation to the operator’s eyes 5 MR688-GPS-RAM V3 PROFESSIONAL Eye detection LED Monitor “OK” indication Sensor lens Speaker for audio warning Infrared LEDs Adjustment nob to adjust the monitor to the correct position GPS Antenna for Startup Functionality Power / Data Cable Ram Mounting Bracket 6 MR688-GPS-RAM V3 PROFESSIONAL The MR688 will Start to monitor for Fatigue at a pre set Speed setting. This eliminates any false warnings when stopped or reversing. The GPS antenna Must Always be connected to work Correctly. When Not Connected – It Will Give False Alarms 7 FUNCTION AND OUTPUT OF THE FATIGUE MONITOR Led and Digital outputs When the MR688 is NOT picking up the eyes, or the Monitor is completely turned away from the operators eyes, the Green Led will be OFF, and the Digital output on Pin 4 will be Low or 0v The 0v on Pin 4 indicates “no eyes detected” This signal can be used with any FMS system to indicate that the operator is not using the monitor while driving. When the MR688 is picking up the eyes, the Green Led will be ON and the Digital output on Pin 4 will be High or 4,2v. The 4,2v on Pin 4 indicates “Eyes detected” and This signal can be used with any FMS system to show that the operator is using the monitor 8 MR688-GPS-RAM FATIGUE MONITOR ALARMS The MR688 will Sound 3 Different Fatigue Alarms Under the following Conditions : First Alarm condition = High Pitched Tone : • With short period Eyes closures Second Alarm condition = Voice Alerts : “ Please Watch the Road “ and “ Please Keep your Eyes on the Road “ • With longer period of Eye closures • And/or Fatigue detected Third Alarm condition = Siren Alarm : • Siren Alarm with continuous Eye closures and/or Fatigue condition With any of the 3 Fatigue Alarm conditions, the Digital output on Pin 3 will be High or 4,2V for 6 seconds With No Fatigue alarm condition the Digital output on Pin 3 Will remain Low or 0V 9  Speed activation to Monitor Fatigue from 10km/h  Eye detection Active when Truck is moving  2 x Digital Outputs on MR688-F1-Gps ( Fatigue / Eyes )  RV-M7-UC-GX Data Modem in Truck connected to MR688 Fatigue monitor to relay Digital Outputs  Data Modem reads Digital Inputs and update to Control Room every 10-20 Seconds depending on setup  Truck Info : Speed /Direction/Voltage/Temp also updated  RavTrackPc system in Control configured to Monitor all Fatigue Alerts, Eye Detection and Truck info  Complete Reporting available and email notifications 10 Typical map and Data screen with FMS connection www.ifatigue.com 11 11 12 iFatigue.com Pieter Jacobs +27828744247 [email protected] www.ifatigue.com 13 13