XFTP SAT SCAN Satellite Meter ● Displays Dish Orientation (Az, El, Po) ● Supports DVB-S and DVB-S2 Signals ● Simultaneous Display of Signal Strength and Signal Quality ● QPSK and 8PSK Signal Level, C/N, BER, CBER, and VBER Measurements ● C and Ku Bands ● More Than Two Hours of LNB Power ● Full Spectrum View ● Auto-Satellite Identification Overview The XFTP SAT SCAN ™ satellite meter allows for a fast and simple satellite dish installation and alignment process. This meter is an excellent choice for installers and contractors to be provided with self-calculated azimuth, elevation, and polarization for initial dish setup, signal level and quality tuning. The meter supports both DVB-S2 and DVB-S signals. Support for H.264, MPEG-4 and MPEG-2 video formats is also provided and is displayed on a full color LCD screen. It also measures digital satellite QPSK, 8PSK signal levels, BER, CBER, VBER and C/N to quickly determine the quality of a signal. The XFTP SAT SCAN uses simple bar graphs and audio tones to provide the necessary tools for fine-tuning the dish position. Power is also provided to the LNB for dish setup without a receiver or TV connected. With the Easyfinder feature, even the most novice user can perform a satellite dish installation. A list of the most commonly used satellites in North America comes pre-configured with the XFTP SAT SCAN. It also allows storage of up to 80 satellite configurations, 40 measurement records, and 10 Spectrums. XFTP by TRILITHIC 9710 Park Davis Drive Indianapolis, IN 46235 Many more satellite configurations from around the world can be downloaded via the meter’s companion software. Custom configurations can also be easily created. With its light weight, this simple to setup and operate satellite meter will provide you with hours of operation time. The complete XFTP SAT SCAN package includes a carry bag, strap, charger, software, data cable, and an operation manual. P:800-344-2412 317-895-3600 F:317-895-3613 E:[email protected] www.fieldtechproducts.com XFTP Specifications Frequency Range 950 to 2150 MHz Signal Level Range -65 dBm to -2 dBm RF Input Connector Replaceable F-type INCLUDES THE FOLLOWING: Carry bag Shoulder strap USB data cable AC battery charger Nickel-metal hydride battery Input Resistance 75 Ω User’s manual Measurements DVB-S2, DVB-S,QPSK, 8PSK signal level, bit error rate (BER), CBER, VBER, carrier-to-noise (C/N) ratio ACCESSORIES: Storage 40 measurement records 80 satellite configuration files 10 Spectrums LNB Power Supply Horizontal polarization/LHCP: +18 V, ≤750 mA Vertical polarization/RHCP: +13 V, ≤750 mA PC Connection USB Switch 22 KHz DiSEqC Switching 8 way DiSEqC Motor Control 1.0/1.2/USALS Power Total power: 8 W (DC8.4 V Rechargeable Battery) Provides 3-4 hours of continuous operation (2 hours with LNB power) 4 hour charge time Operational Temperature 0° to 40° C (32° to 104° F) Storage Temperature -20° to +70° C (-4° to +150° F) Display 128 x 64 Color LCD Weight 3.5lbs (1.6 Kg) Dimensions (H x W x D) 9.84” 4.72x” 2.36x” (250mm x 120mm x 60mm) I/O-15 precision RF coaxial test cable P/N 2071527048 Copyright © 2011 Trilithic, Inc. All Rights Reserved. Specifications are subject to change without notice. Please contact your nearest distributor for further information. XFTP 05/11(Prelim) XFTP by TRILITHIC 9710 Park Davis Drive Indianapolis, IN 46235 P:800-344-2412 317-895-3600 F:317-895-3613 E:[email protected] www.fieldtechproducts.com
© Copyright 2024