Last updated: 20 Oct 2014
Last updated: 20 Oct 2014 VOLUME 2 LIST OF APPROVED PRODUCTS AND SERVICES Foreword by the United Arab Emirates (UAE) Acting Commander in Chief, Major General Rashid Thani Al Matrooshi As the dynamic environment in our Region progresses, we the UAE Civil Defence Authority, has set forth a number of strategic goals for the delivery of public safety. Our strategic goals observe both the national and Ministry of Interior’s strategic plan by; “Providing an effective firefighting and emergency response system delivered by qualified and well trained people using the latest technologies to ensure lives and properties are safeguarded” As a result, the UAE can be ‘benchmarked’ with other Countries that are witnessing a decline in fires and incidents when compared to the density of population. As an example, the number of fire incidents has been reduced by 39% in 2011 compared to 2010, with a marked reduction in small and medium fire incidents, together with a high percentage achievement of a 9 minute response time for first attendance at incidents. “Providing excellent performance and support during disasters and crises” Confirmation of performance and support are achieved during disasters and crisis situations. Civil Defence Departments conduct a range of joint fire safety and evacuation drills in association with other safety agencies for both the public and private sectors. Evacuation drills carried out in Dubai during 2011 was estimated at 356 drills, which targeted 178,530 persons. Customer satisfaction percentage achieved was 97.2%. The number of drills carried out has increased by 142.4% compared to the target number set out in our annual plan. “Spreading a fire safety and awareness culture across the community “ In this regard, a National Safety campaign was launched targeting ‘domestic safety’ with an achieved target of 50% of homes in UAE being visited during a six month period. This was aimed at preventive awareness and removing violations which threaten public safety. During the campaign, 206,490 houses (61.4% of the total dwellings) were visited, again with a marked customer satisfaction percentage of 92%. Similarly a National Safety campaign was also executed at industrial areas, with teams visiting industrial facilities at different industrial areas across the country. 31,647 facilities were inspected. The teams also managed to correct violation situations in 13,400 facilities and 53,426 people were trained in the basic skills of firefighting and awareness. “Equipping operations with the best and appropriate equipment and technologies” The latest state of the art technologies have been introduced for various services such as, ‘e-engineering’ for online drawing approval and the ’24 x 7 smart system’ for building electronic monitoring and protection. Currently 61.7% of buildings are connected to the system and 95.7% surveyed for connection. In addition, the ‘UAE Fire and Life Safety Code of Practice’ with our Standard Operating Procedures (SOPs) is considered a first in the region. This will contribute to reduced costs and effort. Ultimately this will result in a decrease in accidents and improve command and control mechanisms. “Achieving Strategic Partnership with Public/Private and Voluntary Organizations” By ensuring, through careful selection, that products, systems and installers are approved with a listing by Civil Defence, following rigorous third party certification. This ensures that locally we receive the best performance of fire safety products, systems and technologies. ii 20 Oct 2014 VOLUME 2 LIST OF APPROVED PRODUCTS AND SERVICES LPCB is widely recognised as an independent reference for all fire and security safety experts. Their testing laboratories and approvals services together with their leading team of highly qualified expert scientists and engineers, guides us all impeccably towards a qualified framework. Major General Rashid Thani Al Matrooshi Introduction Welcome to the 2014 Edition of the “LPCB Red Book”, the list of approved products and services from LPCB. LPCB is Fire and Security approval brand of BRE Global Ltd. which is part of the BRE Group operating under the BRE Trust. It is an independent third party approvals body offering certification of fire and security products and services to an international market. The LPCB mark and listings signify that products and services have been approved by LPCB. The Red Book is an essential reference for specifiers, regulators, designers and end users of these products and services - if it is listed here, you know it has been checked out by people you can trust BRE Global also offers independent approval of construction products, management systems and in the area of sustainability though its BRE Global Certification and BREEAM brands. Where these have relevance to fire safety and security these are also listed in the Red Book (The details of these schemes are given in the relevant introductory sections.) BRE Global Ltd is also a Notified Body for the purpose of CE marking and European Technical Assessment in connection with the European Construction Product Regulation (CPR) and other European Directives; the Pressure Equipment Directive (PED), Marine Equipment Directive (MED) and Transportable Pressure Equipment Directive (TPED). BRE Global - protecting people, property and the planet. The Red Book is divided into sections which list related groups of products and services such as suppression, security and so on. Each section also summarises the technical basis for the approval of each product or service. The Red Book should always be used in conjunction with rules, regulations and design specifications required by the relevant Authority having jurisdiction. The 2014 edition of the Red Book comprises: Volume 1: 20 Oct 2014 iii VOLUME 2 LIST OF APPROVED PRODUCTS AND SERVICES Fire detection and alarm products, systems, and cables Manual fire extinguishing equipment Automatic sprinkler, water spray and deluge systems Fixed fire fighting products and systems Related installers Volume 2: (This Volume) Passive fire protection products Security protection products Fire doors and shutters Smoke and fire ventilation systems Related installers Management Systems Construction products Listings are given in the name of the manufacturer or service provider, in alphabetical order. They can be downloaded free of charge from our website at www.redbooklive.com and also via an App that is available free from Apple iStore (for iPhone and iPad), from Google Play, (for Android phones and tablets) and Windows Store (for Windows 8 phones). Red Book updates Product and services approval details are amended regularly. To ensure that you are using the most up to date information please refer to www.redbooklive.com or download the App. What is Third Party Approval? A frequent concern of stakeholders is in knowing whether a product will perform in accordance with the stated specifications. These concerns can involve such product attributes as safety, health or environmental impacts, durability, compatibility, suitability for intended purposes or for stated conditions, and other similar considerations. These issues can all be addressed through product approvals. Third party approval (or certification) is a conformity assessment process, carried out by a body that is independent of both supplier and customer organisations. It provides confirmation that products and services have met and will continue to meet the requirements of specified standards and other normative documents. LPCB third party product approval schemes are quality assurance schemes and comprise initial type testing and technical evaluation, assessment and surveillance of the manufacturer’s quality system and production procedures, regular audit testing, labelling and listing. iv 20 Oct 2014 VOLUME 2 LIST OF APPROVED PRODUCTS AND SERVICES Similarly, LPCB schemes for suppliers of services (installers) are also quality assurance schemes comprising a technical assessment of an installer’s capability, assessment and surveillance of the installer’s quality system and production procedures, regular inspection of completed installations and listing. Benefits of Third Party Approval For specifiers, regulators, insurers, manufacturers and installers, the benefits of an LPCB approval are: For specifiers and regulators: Risk reduction - specifying LPCB approved products and services demonstrates due-diligence and best endeavour and mitigates against possible accusations of negligence. Avoidance of costly mistakes - you can trust LPCB approved products and services to conform each and every time. Time - using Red Book Live to search for and assess products and services can save you time. For manufacturers and installers: Increased global sales - LPCB approval is recognised and specified widely throughout the world. In some territories LPCB approval is a mandatory requirement. Added value of the product or service - LPCB approved products and services are recognised as providing added value given their ability to conform each and every time. Reduced liability - LPCB approved products and services demonstrate due-diligence which can reduce liability for both you and your customers. What does LPCB Approval offer? LPCB offers approvals to existing British, European, International and LPCB’s own Loss Prevention Standards (LPSs). LPCB’s LPS approval schemes for both products and services are essentially level 5 schemes, as described in ISO/IEC Guide 67, with the added requirement to have a quality system certificated to ISO 9001. The technical requirements of LPCB schemes are given in Loss Prevention Standards (LPSs). These documents are drafted by LPCB technical experts in conjunction with appropriate external experts. They are then peer reviewed by representatives from trade bodies, regulators, insurers, specifiers, manufacturers and other suppliers. Finally these documents are approved for use by the BRE Global Governing Body; the Body that oversees all of the certification activities of BRE Global, including LPCB. Product schemes comprise: Initial type testing and evaluation of product, sampled by LPCB. Approval and surveillance of the manufacturer’s (or supplier’s) quality management system to ISO 9001 (if you have products in for testing at LPCB, it generally costs little or no more to achieve ISO 9001 certification). Assessment and surveillance of the manufacturer’s (or supplier’s) factory production control system (FPC). Periodic audit testing of the product from either the factory or marketplace. Labelling or marking as appropriate. Listing of the approved product (service) in the Red Book 20 Oct 2014 v VOLUME 2 LIST OF APPROVED PRODUCTS AND SERVICES Installer schemes comprise: Technical assessment of the installation contractor’s capability. Approval and surveillance of the contractor’s quality management system to ISO 9001 or assessment against the requirements of the relevant Loss Prevention Standard where ISO 9001 is not appropriate. (If you have applied for LPCB assessment of your services, it generally costs little or no more to achieve ISO 9001 certification). Regular surveillance inspections of on-going installations. The issue of Certificates of Conformity to demonstrate compliance for each installation. Listing of the approved installer in the Red Book. The LPCB Mark - the Mark you can trust After approval of a product or service the manufacturer or service provider is allowed to place the LPCB certification mark, as shown below , on the product, packaging and literature etc. In September 2011 this image was updated. To this from (Discontinued for new approvals from 1 October 2011) A transition period of up to three years has been allowed for the change, so although we expect many of our clients’ product(s) will already be carrying the new version of the mark, the ‘old’ mark remains valid and you can still rely on the products carrying the old mark where their certificate was issued before 1 October 2011. Together with the mark you should always determine the product/service certificate number and check if a listing still valid by going to www.redbooklive.com. Where LPCB holds accreditation through the United Kingdom Accreditation Service (UKAS), the approved company is allowed to include the UKAS symbol (the Crown and Tick) alongside the LPCB mark for certain applications e.g. promotional literature or material and stationery, as shown below. (Full details of LPCB accreditation can be found on the UKAS website at www.ukas.com <<http://www.ukas.com>>) Where for reasons of space or cost the use of the above full mark is not practical, then the following simplified mark may be applied directly to the product (for some schemes only). The LPCB scheme rules define how and where the marks can be used. vi 20 Oct 2014 VOLUME 2 LIST OF APPROVED PRODUCTS AND SERVICES The LPCB horseshoe is the mark you can trust and it is recognised in over 60 countries around the world by regulators, specifiers, designers and end users. For Fire and Security Products and Services Trust the LPCB Mark The products listed in Volume 2: Part 5 - Construction Products, are approved under our BRE Global Certification brand - the certification mark for this brand is changing. To this from (discontinued for new certificates from 1 January 2014) A transition period of up to three years is being allowed for the change and the ‘old’ mark remains valid where the certificate was issued before 1 January 2014. Other Listings from BRE Global 20 Oct 2014 vii CONTENTS 2 Fire doors, shutters and installers of fire and security doors 1 SECTION 1.1 Firebreak doors and shutters 3 SECTION 1.2 Lift landing doors 16 SECTION 2 Fire and security door and shutter installers 17 SECTION 3 Inspection, repair and maintenance of fire and security doors and shutters 21 viii 20 Oct 2014 INDEX A Ascot Doors Limited 3, 21 Assa Abloy Entrance Systems Limited 21 Attenborough Doors Limited 3 Avert Fire (UK) Ltd 17, 22 C Checkmate Fire Solutions Ltd 17, 22 Clark Door Limited 3, 17 D DoorCheck Limited 22 E Esprit UK Limited 18, 23 F Fire Safety Services (UK) Limited 23 G Grange Door Systems 18, 23 gte Brandschutz AG 4 Gunfire Trading Divison of Gunite (Eastern) Limited 18 H Hart Door Systems 5, 18 Hörmann KG Freisen 5 I Industrial Door Engineering Limited 7, 18, 24 K Kone PLC 19, 24 Konecranes Industrial Door Services 24 20 Oct 2014 L L.B.S. Group (incorporating L.B.S Security Services Limited - t/a Specialized Door Services, Russell Shutters, Olsen Shutters and Ranford Doors) 7, 25 Lincs Doors Limited 8 M Manning Construction Limited 19 Mercian Shutters Limited 8, 19, 25 Middle East Insulation 9 N Nene Valley Fire and Acoustic Limited 19, 25 P Prestige Fire Door Services Limited 20 S Safe Partnership 20, 26 Saudi Factory For Fire Equipment Co. 9 Stanair Industrial Door Services Limited 26 Stobich Brandschutz GmbH 10 Sunray Engineering Limited 12, 20 T Technocover Limited (incorporating TechnoRail and Strataform) 14 Tyco Fire and Integrated Solutions (the trading company for Tyco Fire and Integrated Solutions (UK) Limited and Tyco Fire and Integrated Solutions (Ireland) Limited) 26 ix Part 2 FIRE DOORS, SHUTTERS AND INSTALLERS OF FIRE AND SECURITY DOORS PART 2: FIRE DOORS, SHUTTERS AND INSTALLERS OF FIRE AND SECURITY DOORS INTRODUCTION Fire doors and shutters contribute to the passive fire protection of buildings by maintaining the: fire separation of compartment walls, while allowing the passage of persons or objects fire separation in shafts or service ducts that penetrate compartment floors protection provided by walls forming protected routes for means of escape. In addition to careful design and product selection, it is recommended that all products are installed and maintained by LPCB approved contractors who have demonstrated their competence. Products Doors and shutter assemblies are approved in accordance with: LPS 1056: Test and Evaluation Requirements for the Approval and Listing of Fire Doorsets, Lift Landing Doors and Shutter Assemblies. The fire testing element of this LPS is based on BS 476:Part 20 - Method for determination of the fire resistance of elements of construction (general principles) or EN 1634-1 Fire resistance test for doors and shutter assemblies- Part 1: Fire doors and shutters and EN 81-58 Landing doors fire resistance test. LPS 1056 also includes requirements for the reliability testing of the door and shutter assemblies, and assessment procedures for doors and shutters that are too big to be directly fire tested. Installation contractors LPCB approved installation contractors are assessed in accordance with: LPS 1271: Requirements for LPCB Approval and Listing of companies installing fire and security doors, doorsets, shutters and active fire/smoke barriers. Maintenance contractors LPCB approved maintenance contractors who repair and maintain fire doors and shutters are approved in accordance with: LPS 1197: Requirements for LPCB Approval and Listing of companies inspecting, repairing and maintaining fire and security doors, doorsets, shutters and active fire/smoke barriers. 2 20 Oct 2014 PART 2: SECTION 1.1 FIREBREAK DOORS AND SHUTTERS This section lists firebreak doorsets and shutters approved to LPS 1056 Test and Evaluation requirements for the LPCB Approval and Listing of Fire Doorsets, Lift Landing Doors and Shutter Assemblies. LPS 1056 is based upon relevant BS or European test criteria and not only looks at the fire integrity and insulation (where applicable) but also includes reliability cyclic tests and grading. For details of the specific fire resistance required for firebreak doors and shutters for different building types, see the LPC Design Guide for the Fire Protection of Buildings:2000. Where insulation is marked as 0, this denotes that the insulation was not measured or that it could not be measured in accordance with the relevant standard. Ascot Doors Limited Britannia Way Industrial Park, Union Road, Bolton BL2 2HE, United Kingdom Tel: +44 (0)1204 545801 • Fax: +44 (0)1204 545800 E-mail: [email protected] • Website: www.ascotdoors.co.uk Certificate No: 131a to LPS 1056: Issue 6 Product Name Spec. Door Type Max Height (m) Max Width (m) Max Area (m2 ) A200 Series 4 Rolling Shutter 6.00 9.00 54.00 Fire Resistance (min) BS 476: Part 22 Integrity / Insulation 240 / 0 LPCB Ref. No. 131a/01 Notes: 1. LPCB Ref No. 131a/01 - for a list of the sizes for the shutter dimensions up to the stated please refer to BRE Global Assessment Report CC200913 Review 1. Attenborough Doors Limited Merlin Way, Quarry Hill Industrial Estate, Ilkeston, Derbyshire DE7 4RA, United Kingdom Tel: +44 (0)115 9300815 • Fax: +44 (0)115 9448930 E-mail: [email protected] • Website: www.attenboroughdoor.co.uk Certificate No: 145b to LPS 1056: Issue 5 Product Name Spec. Door Type Max Height (m) Max Width (m) Max Area (m2 ) Attenborough Fire Shutter 4 Rolling shutter 7.00 7.00 49.00 Fire Resistance (min) BS 476: Part 22 Integrity 240 Fire Resistance (min) BS 476: Part 22 Insulation 0 LPCB Ref. No. 145b/01 Clark Door Limited Unit F Central, Kingmoor Park, Carlisle, Cumbria CA6 4SJ, United Kingdom Tel: +44 (0)1228 522321 • Fax: +44 (0)1228 401854 E-mail: [email protected] • Website: www.clarkdoor.com Certificate No: 106a to LPS 1056: Issue 6 20 Oct 2014 3 PART 2: SECTION 1.1 FIREBREAK DOORS AND SHUTTERS Fireman Product Name Door Type Max Height (m) Max Width (m) Max Area (m2) Fireman Sliding door 4.0 4.0 Single leaf hinged door Double leaf hinged door 2.76 2.76 16.00 Fire Resistance (min) BS 476: Part 22 Integrity 240 Fire Resistance (min) BS 476: Part 22 Insulation 0 1.423 3.57 240 0 2.845 7.15 240 0 Reliability (self closing durability Ref. LPS 1056 Clause 3.6) LPCB Ref. No. No performance determined No performance determined No performance determined 106a/01 106a/02 106a/03 Notes: 1. Clark Door Ltd are also approved under LPS 1271 for installation of Fireman series of fire rated doorsets. 2. 106a/02 & 106a/03 - Vision panels, 6.5mm thick Pyroshield clear glass with maximum dimensions 1000mm wide x 1000mm high. Maximum area 1m² 3. 106a/03 - Double leaf doors, passive leaf must be fitted with a 3-point latching mechanism that engages in the top of frame, sill and the active leaf, and the active leaf must be fitted with a full length astragal that overlaps the passive leaf by at least 25mm. 4. 106a/01, 106a/02, & 106a/03 - Door leaf skins can be fabricated from galvanised mild steel or grade 316 stainless steel. 5. 106a/01, 106a/02, & 106a/03 - The doorsets can be installed in a rigid supporting construction such as brick, blockwork or concrete. The doorsets can also be installed in a composite wall panel system which provides equal or greater fire resistance than the doorset, when installed in a composite wall panel system the minimum fixing detail described in assessment report CC213834 shall be provided. gte Brandschutz AG Hamburger Straße 2, D-14532 Stahnsdorf, Germany Tel: +49 3329 6359-0 • Fax: +49 3329 6359-25 E-mail: [email protected] • Website: www.gte.ag Certificate No: 735a to LPS 1056: Issue 6.1 Fire Resistance (m) BS 476: Part 22 Insulation 90 LPCB Ref. No. 1.82 Fire Resistance (m) BS 476: Part 22 Integrity 90 1.4 1.82 90 90 735a/02 1.3 1.1 1.43 90 90 735a/03 0.85 1.1 0.935 90 90 735a/04 Product Name Door Type Max Height (m) Max Width (m) Max Area (m2) CSS Vertical sliding conveyor system shutter Horizontal sliding conveyor system shutter Flap type conveyor system shutter (Single) Flap type conveyor system shutter (Stacked) 1.3 1.4 1.3 735a/01 Notes: 1. LPCB Product Ref. No’s 735a/01, /02, /03 & /04 suitable for installation into masonry walls and Durasteel partitions as described in Assessment report No. CC221812. 2. CSS conveyor system shutters must be regularly maintained in line with the gte Brandschutz recommendations. 4 20 Oct 2014 PART 2: SECTION 1.1 FIREBREAK DOORS AND SHUTTERS Hart Door Systems Redburn Road, Westerhope Industrial Estate, Westerhope, Newcastle upon Tyne NE5 1PJ, United Kingdom Tel: +44 (0)191 214 0404 • Fax: +44 (0)191 271 1611 E-mail: [email protected] • Website: www.hartdoors.com Certificate No: 016a to LPS 1056: Issue 6 Product Name Door Type Max Height (m) Max Width (m) Max Area (m 2) Firebrand Face-fixed Rolling shutter Face-fixed Rolling shutter 7.0 7.0 49.0 Fire resistance (min) BS 476 Part 22 Integrity / Insulation 240/0 3.250 2.750 8.937 60/0 Reliability (self closing durability ref. LPS 1056 clause 3.6) No performance determined No performance determined LPCB Ref. No. 016a/01 016a/02 Notes 1. LPCB ref. 016a/01 and 016a/02 for a list of detailed specification and component sizes for the shutter dimensions up to the maximum stated please refer to BRE Global assessment CC92909 review 2. 2. LPCB ref. 016a/01 The Firebrand shutter is approved for use when built into masonry/concrete or steel supporting constructions having a fire resistance greater or equal to that required of the doorset itself as detailed in BRE Global assessment CC92909 review 2. 3. LPCB ref. 016a/02 The Firebrand shutter is approved for use when built into a non-loadbearing drywall partition system having a fire resistance greater or equal to that required of the doorset itself as detailed in BRE Global assessment CC92909 review 2. 4. Hart Door Systems Ltd are also approved under LPS 1271 for installation of Firebrand rolling shutters. Hörmann KG Freisen Bahnhofstrasse 43, D-66629 Freisen, Germany Tel: +49 (0)6855 993-0 • Fax: +49 (0)6855 993 197 E-mail: [email protected] • Website: www.hoermann.de Certificate No: 655a to LPS 1056: Issue 6.2 Product Name Door Type Vision Panel Glas Type Maximum leaf size (see note 10) Height (mm) Maximum leaf size (see note 10) Widith (mm) Maximum leaf size (see note 10) Area (m²) HBS 60 C-1 Single leaf hinged door Double leaf hinged door Single leaf hinged door Single leaf hinged door Double leaf hinged door double leaf hinged door Single leaf hinged door Double leaf hinged door 6.5mm Georgianwired 2487 1242 6.5mm Georgianwired 2487 6.0mm Pyran S HBS 60 C-2 HBS 90 C-1 HBS 90 C-2 HBS 120 C-1 HBS 120 C-2 20 Oct 2014 Vision Panel max clear view widith (mm) 522 Vision Panel max clear view area (m²) 0.40 Transom panel Option Available (see note 5) Fire Resistance (min BS 476 Part 22 Integrity / Insulation LPCB Ref. No. 3.088 Vision Panel max clear view height (mm) 937 Yes 60 / 0 655a/07 1242 3.088 937 522 0.40 Yes 60 / 0 655a/08 2487 1242 3.088 1002 264 0.22 Yes 90/ 0 655a/09 6.5mm Georgianwired 2487 1242 3.088 781 435 0.34 Yes 90 / 0 6.0mm Pyran S 2487 1242 3.088 1002 264 0.22 Yes 90 / 0 6.5mm Georgianwired 2487 1242 3.088 781 435 0.34 Yes 90 / 0 6.0mm Pyran S 2487 1242 3.088 1002 264 0.22 Yes 120 / 0 655a/11 6.0mm Pyran S 2487 1242 3.088 1002 264 0.22 Yes 120 / 0 655a/12 655a/10 5 PART 2: SECTION 1.1 FIREBREAK DOORS AND SHUTTERS Product Name Door Type Vision Panel Glas Type Maximum leaf size (see note 10) Height (mm) Maximum leaf size (see note 10) Widith (mm) Maximum leaf size (see note 10) Area (m²) HBS 30 D-1 Single leaf hinged door Single leaf hinged door Single leaf hinged door Double leaf hinged door Double leaf hinged door Double leaf hinged door Promaglas 90/35 Type 1.0 4225 1950 Promaglas 90/35 Type 1.0 4062 Promaglas 90/35 Type 1.0 HBS 60 D-1 HBS 90 D-1 HBS 30 F-2 HBS 60 F-2 HBS 90 F-2 Vision Panel max clear view widith (mm) 1080 Vision Panel max clear view area (m²) 2.25 Transom panel Option Available (see note 5) Fire Resistance (min BS 476 Part 22 Integrity / Insulation LPCB Ref. No. 6.580 Vision Panel max clear view height (mm) 2085 No 30 / 0 655a/13 1875 6.330 2085 1080 2.25 No 60 / 0 655a/14 3770 1740 5.850 2085 1080 2.25 No 90 / 0 655a/15 - 3700 1694 5.69 - - - No 30 / 30 655a/16 - 3700 1694 5.69 - - - No 60 / 30 655a/17 - 3458 1583 5.21 - - - No 90 / 30 655a/18 Notes: 1. .LPCB ref No. 655a/07 & 08 for alternative approved thin/thick rebated doorsets, frame profiles, sill arrangements & door furniture please refer to BRE assessment report CC 94538 Review 4. 2. LPCB ref No. 655a/09, 10, 11 & 12 for alternative approved thin/thick rebated doorsets, frame profiles, sill arrangements & door furniture please refer to BRE assessment report CC 292106. 3. LPCB ref No. 655a/13, 14 & 15 doorsets are approved with the following hardware only. a. Hinges - 3 x Schwarte b. Locking mechanism - A BKS 6065 lock with an additional BKS6138 lock c. Door closer - Geze TS 4000 d. Door furniture - Eco Schulte 0432-EN 179-DO 20.3 plastic-coated steel lever handles, four dog bolts along the hinge edge. 4. LPCB ref No. 655a/16, 17 & 18 doorsets are approved with the following hardware only a. Hinges - 2 pairs (4) Schwarte FH-615-20-KO on each leaf (passive/active leaf) b. Door closer - GEZE TS 4000 (active/passive leaf) c. Locking mechanism - BKS 6065 lock with additional BKS 6138 catch lock (active leaf), and BKS 1899 rebate locking bolt (passive leaf) d. Door furniture - ECO Shulte DIN 18273-FS-SG-BB-PZ lever handles (active/passive leaf) along with ECO Shulte SR Basis-1 door selector and three security bolts. 5. Where a doorset is fitted with a transom panel, the transom shall be up to a maximum height of 1000mm and not exceeding the maximum permitted height of the doorset, and be of the same construction as the door leaf which is fastened to the door frame with security bolts at the top and steel screws at the bottom at maximum 500mm centres. The transom panel may be fitted into the frame type either with or without flexible perimeter seals. For LPCB ref no 655a/07, 08, 09, 10, 11 & 12 a vision panel may be fitted within the transom panel in the same way as for the door leaf, see note 6. 6. LPCB ref No. 655a/07, 08, 09, 10, 11 & 12 Vision panel frames, steel channel spacers, minimum 1.0mm thick are welded to the leaf and connected together through the door leaf with M5 steel screws and threaded sockets at 250mm nominal centres. LPCB ref No. 655a/07 and 08 frame depth which holds the 6.5mm-thick Georgian-wired glass is 15 mm. For LPCB ref No. 655a/09, 10 & 11 the depth which holds the 6.5mm-thick Georgian-wired glass and the 6.0mm-thick Pyran S glass is 15mm For LPCB Ref No. 655a/12 the depth which holds only the 6.0mm-thick Pyan S glass is 15mm.. Ceramic fibre tape, nominally 4mm thick, is fitted between the glass and the frame. The single and double leaf doorsets may be fitted with one or more vision panels providing the following requirements are met a. Where more than one panel is fitted the max total vision area must not exceed 0.34m2 and each vision panel must be separated by at least 165mm b. The vision panel must be a minimum of 165mm from the leaf edge. c. The arrangement of the vision panels in double leaf doorsets shall be the same in both leaves. 7. LPCB ref No. 655a/13, 14 & 15 Vision panel frames, comprising of 2mm-thick T-profiles, 30mm x 30mm, which are connected via 2mm fillet welds, the tail of the T-profiles are covered on both sides with strips of Promatect-L board, 30mm x 15mm. The vision panel Promaglas 90/35 Type 1.0 is held in place by a 2mm-thick steel glazing bead 44.5mm x 20.5mm fixed back to the glazing support frame with 4.2mm diameter x 50mm long self tapping screws. The perimeter on both sides is sealed against the glazing beads using EPDM seals. 8. LPCB ref No. 655a /07, 08, 09, 10,11 & 12 doorsets may be installed in either Masonry minimum 215mm-thick, Concrete/concrete block minimum 150mm-thick, autoclaved aerated concrete block walls minimum 215mm -thick / 400kg/m2 or Steel stud with plasterboard or calcium silicate board partitions. Where the doorset is installed in a plasterboard or calcium silicate board partition, the inside of the aperture to which the doorset is being fixed is lined with 2mm thick steel stud channel section, with flanges at least 40mm wide. The vertical studs either side of the aperture are fixed top and bottom to either a masonry or concrete supporting construction, and the horizontal stud along the top of the aperture is fixed to the vertical studs at either end. The door frame shall also be filled with fire resisting board and fixed to the partition using 5mm diameter self-tapping self-drilling screws. 9. LPCB ref No. 655a/13, 14, 15, 16, 17 & 18 doorsets may be installed in masonry or concrete walls minimum 240mm-thick. 10. The dimensions quoted are the individual door-leaf dimensions, not including the frame or overall clear opening. 6 20 Oct 2014 PART 2: SECTION 1.1 FIREBREAK DOORS AND SHUTTERS 11. LPCB ref No. 655a/07, 08, 09, 10,11,12, 13, 14, 15, 16, 17 & 18 doorsets the reliability (self-closing durability Ref. LPS 1056 clause 3.6) has no performance determined. Industrial Door Engineering Limited Winnington Avenue, Winnington, Northwich, Cheshire CW8 4EQ, United Kingdom Tel: +44 (0)1606 871832 • Fax: +44 (0)1606 871482 E-mail: [email protected] • Website: www.industrial-door-eng.co.uk Certificate No: 165a to LPS 1056: Issue 6 Product Name Door Type Max Height (m) Max Width (m) Max Area (m2) 49.0 Fire Resistance (min) BS 476: Part 22 Integrity 240 Fire Resistance (min) BS 476: Part 22 Insulation 0 Sentry Rolling shutter 7.0 7.0 Sentry 2 Rolling shutter 7.0 7.0 49.0 120 0 Sentry 1 Compact Rolling shutter 2.20 3.40 7.48 60 0 Sentry 1 Rolling shutter 2.20 2.20 4.84 60 0 Reliability (self closing Durability Ref LPS 1056 Clause 3.6) No performance determined No performance determined No performance determined No performance determined LPCB Ref. No. 165a/01 165a/02 165a/03 165a/04 Notes: 1. LPCB Ref No. 165a/03 - Sentry 1 Compact rolling shutter can be fitted with either the flat or curved lath. 2. Industrial Door Engineering Limited are also Certified for the installation of fire rated Sentry rolling shutters against the requirements of LPS 1271. L.B.S. Group (incorporating L.B.S Security Services Limited - t/a Specialized Door Services, Russell Shutters, Olsen Shutters and Ranford Doors) Unit 6, Sterling Trading Estate, Rainham Road South, Dagenham, Essex RM10 8TX, United Kingdom Tel: +44 (0)208 526 8572 • Fax: +44 (0)208 984 0378 E-mail: [email protected] • Website: www.lbsgroup.co.uk Certificate No: 247b to LPS 1056: Issue 5 Fireguard Product Name Door Type Max Height (m) Max Width (m) Max Area (m2 Fireguard Rolling shutter 7.0 10.0 49.0 Fire Resistance Integrity/Insulation (min) BS 476: Part 22 Integrity 240/0 LPCB Ref. No. 247b/01 Notes: 1. LPCB Ref 247b/01 - for a list of the component's and sizes for the shutter dimensions up to the maximum stated please refer to BRE Global assessment CC203994 Rev 2. 20 Oct 2014 7 PART 2: SECTION 1.1 FIREBREAK DOORS AND SHUTTERS Lincs Doors Limited Innovation Way, Europarc, Grimsby, North East Lincolnshire DN37 9TT, United Kingdom Tel: +44 (0)1472 311057 • Fax: +44 (0)1472 311058 E-mail: [email protected] • Website: www.lincsdoors.co.uk Certificate No: 777a to LPS 1056: Issue 6 1.99 Fire Resistance (min) BS 476: Part 22 Integrity 120 Fire Resistance (min) BS 476: Part 22 Insulation 0 1.130 2.48 60 0 2.114 0.942 1.99 90 0 2.536 1.130 2.48 60 0 2.114 1.884 3.98 120 0 2.536 2.260 4.96 60 0 2.114 1.884 3.98 90 0 2.536 2.260 4.96 60 0 Product Name Door Type Max Height (m) Max Width (m) Max Area (m2 Pyroshield Single leaf hinged without vision panel Single leaf hinged without vision panel Single leaf hinged with vision panel Single leaf hinged with vision panel Double leaf hinged without vision panel Double leaf hinged without vision panel Double leaf hinged with vision panel Double leaf hinged with vision panel 2.114 0.942 2.536 Reliability (self closing durability Ref. LPS 1056 Clause 3.6) LPCB Ref. No. No performance determined No performance determined No performance determined No performance determined No performance determined No performance determined No performance determined No performance determined 777a/01 777a/02 777a/03 777a/04 Notes: 1. LPCB Ref Nos. 777a/02 & 777a/04 - Vision panels, 10mm thick Pyrodur glass with maximum dimensions 245mm wide x 350mm high. 2. LPCB Ref Nos. 777a/03 & 777a/04 - Double leaf doors, passive leaf must be fitted with a 3-point latching mechanism that engages in the top of frame, sill and the active leaf, and the active leaf must be fitted with a full length astragal that overlaps the passive leaf by at least 25mm. 3. LPCB Ref Nos. 777a/01, 777a/02, 777a/03 & 777a/04 - Door leaf skins can be fabricated from galvanised mild steel or grade 316 stainless steel. 4. LPCB Ref Nos. 777a/01, 777a/02, 777a/03 & 777a/04 - The doorsets can be installed in a rigid supporting construction such as brick, blockwork or concrete. The doorsets can also be installed in a composite wall panel system which provides equal or greater fire resistance than the doorset, when installed in a composite wall panel system the minimum fixing detail described in assessment report CC223023 shall be provided. Mercian Shutters Limited Pearsall Drive, Brades Road Industrial Estate, Oldbury, West Midlands B69 2RA, United Kingdom Tel: +44 (0)121 544 6124 • Fax: +44 (0)121 552 6793 E-mail: [email protected] • Website: www.merciandoors.co.uk Certificate No: 355b to LPS 1056: Issue 5 excluding installation Product Name Spec. Door Type Max Height (m) Max Width (m) Max Area (m2 ) SF Series 4 Rolling shutter Rolling shutter 7.00 5.00 7.00 10.0 49.00 50.00 Fire Resistance (min) BS 476: Part 22 Integrity 60, 120 & 240 60 & 120 Fire Resistance (min) BS 476: Part 22 Insulation 0 0 LPCB Ref. No. 355b/01 Notes: 1. SF series rolling shutters ref 355b/01 - Reference must be made to assessment report no CC242948 issue 2 dated 11 June 2008 to confirm component dimensions relevant to the system size and fire resistance required. 2. Mercian Shutters Ltd are also approved under LPS 1271 for installation of SF Series fire rated rolling shutters. 8 20 Oct 2014 PART 2: SECTION 1.1 FIREBREAK DOORS AND SHUTTERS Middle East Insulation P O Box 14225, Dubai, United Arab Emirates Tel: +971 48801600 • Fax: +971 48801700 Website: [email protected] Certificate No: 708a to LPS 1056: Issue 6.1 Product Name Maximum leaf size Height (mm) Maximum leaf size Width (mm) Maximum leaf size Area (m²) Vision Panel Glass type FORT/HC single leaf doorset 2967 1196 3.22 N/A 6mm Pyran S 6mm Pyran S 6mm Pyroshield 6mm Pyroshield N/A FORT/HC double leaf doorset 2968 1056 2.84 2968 1056 2.84 2968 1056 2.84 2968 1056 2.84 2968 1056 2.84 2337 1017 2.16 2337 1017 2.16 2337 1017 2.16 2337 1017 2.16 6mm Pyran S 6mm Pyran S 6mm Pyroshield 6mm Pyroshield N/A Vison panel Maximum clear view height (mm) - Vision Panel Maximum clear view width (mm) - Vision panel Maximum clear view area (m²) - Transom Panel Option Available (see note 2) NO BS 476: Part 22 Fire Resistance (minutes) Integrity 180 BS 476: Part 22 Fire Resistance (minutes) Insulation 0 LPCB Ref. No. 708a/03 500 200 0.10 YES 120 0 805 230 0.17 YES 90 0 700 200 0.14 YES 90 0 805 230 0.17 YES 60 0 0 - - - YES 120 700 200 0.14 YES 120 0 805 230 0.17 YES 90 0 700 200 0.14 YES 90 0 805 230 0.17 YES 60 0 2337 1017 2.16 - - - YES 120 0 2682 1196 2.91 6mm Pyran S 254 254 0.065 YES 120 0 2682 1196 2.91 700 200 0.140 YES 90 0 2682 1196 2.91 700 200 0.140 YES 90 0 2682 1196 2.91 6mm Pyran S 6mm Pyroshield 6mm Pyroshield 805 230 0.168 YES 60 0 708a/01 708a/05 708a/06 Notes: 1. LPCB Ref. No's: 708a/03, 708a/05 and 708a/06, Where a doorset is fitted with a transom panel, the maximum height of the doorset, including transom panel, should not exceed 3000mm. The transom panel should be a maximum of 580mm high and have the same construction as the door leaves and be separated from them by a transom bar. The panel should be fastened to the door frame using 5mm Ø bolts via 25mm x 25mm x 60mm long x 2mm-thick clips. 2. LPCB Ref. No's: 708a/01, 708a/03 and 708a/06, Doorset must be fitted with two pairs of hinges per leaf. 3. LPCB Ref. No: 708a/05 Doorset must be fitted with one-and-a-half pairs of hinges per leaf. 4. The approved doorsets have been tested or assessed for use with the following hardware types; a. Hinges - FORT stainless steel ball bearing hinges, McKinney butt hinges or SOSS concealed mortise hinges. Alternative mild steel, galvanised or stainless steel hinges with characteristics as detailed in assessment report CC 282058 Issue 2. b. Locking mechanism - Dorma 752F or Eurospec DSB8225 door security bolt. Alternative locks and latches with characteristics as detailed in assessment report CC 282058 Issue 2. c. Door furniture - All door furniture shall be manufactured from steel or stainless steel as detailed in assessment report CC 282058 Issue 2. d. Door closer - Dorma 7601, Dorma TS72 or Geze TX4000 for use with single leaf doorsets, and Dorma TS72 for use with double leaf doorsets only. 5. LPCB Ref. No's; 708a/01, 708a/03, 708a/05 and 708a/06 the doorsets listed have been tested in a brick wall surround and are approved when installed in masonry or concrete wall surround with frame options as defined in assessment report CC282058 Issue 2. Saudi Factory For Fire Equipment Co. Al-Kharj Road, 2nd Industrial Area, PO Box 4441, Riyadh 14334, Kingdom of Saudi Arabia Tel: +966 1 265 0070 • Fax: +966 1 265 2190 E-mail: [email protected] • Website: www.sffeco.com Certificate No: 403c to LPS 1056 Issue 6.1 20 Oct 2014 9 PART 2: SECTION 1.1 FIREBREAK DOORS AND SHUTTERS Product Name Door Type Max Height (mm) Max Width (mm) Max Area (m²) SFFECO FIRE DOOR Single leaf, hinged steel doorset 2197 1092 2.399 Fire Resistance (minutes) BS 476: Part 22 Integrity 180 Fire Resistance (minutes) BS 476: Part 22 Insulation 0 Relibility (self closing durability Ref. LPS 1056 Clause 3.6) No Performance Determined LPCB Ref. No. 403c/01 Notes. 1. LPCB Ref. No. 403c/01 The SFFECO FIRE DOOR doorset is approved to withstand a fire exposure from the opening side only, as detailed in BRE Assessment report CC225304. Stobich Brandschutz GmbH Pracherstieg 6, D - 38644, Goslar, Germany Tel: 00 49 532 157080 • Fax: 00 49 532 157080 E-mail: [email protected] • Website: www.stobich.com Certificate No: 1064a to LPS 1056: Issue 6.1 Product Name Supporting construction Penetration sealing Max leaf height (m) ECClos-Q conveyor system closure 160mm thick Plasterboard partition (see note 1) 200mm blockwork wall (see note 4) 200mm aerated concrete See note 2 ECClos-S conveyor system closure (horizontally closing) ECClos-S conveyor system closure (vertically closing) ECClos-Flex conveyor system closure (vertically closing) 200mm aerated concrete 160mm thick Plasterboard partition (see note 1) 160mm thick Plasterboard partition (see note 1) 240mm masonry 200mm aerated concrete 200mm aerated concrete 200mm aerated concrete Max leaf area (m²) 1.377 (note 3) Max leaf width (m) 1.940 (note 3) See note 5 See note 6 1.377 (note 3) 1.940 (note 3) See note 7 3.177 See note 7 Fire Resistance (Min) BS EN 1366-7 Integrity/Insulation 120/120 1064a/01 2.343 (note 3) 240/120 1064a/02 3.374 10.719 120/90 1064a/03 4.765 5.061 16.079 120/0 See note 8 3.187 3.374 10.753 120/120 See note 8 4.780 5.061 16.129 120/0 See note 9 See note 11 4.780 3100 5.061 3652 16.129 11.321 120/90 90/0 See note 12 3100 3852 11.321 60/0 See note 13 3100 3652 11.321 60/0 2.343 (note 3) LPCB Ref. No. 1064a/04 1064a/05 1064a/06 Notes: 1. LPCB Ref 1064a/01 - Standard flexible supporting construction according to BS EN 1366-7, table no 3, giving a fire resistance of 120 minutes, a cross bar type steel frame consisting of two uprights spanning from the floor to ceiling with a horizontal steel spanning between the sections (all 100mm x 100mm x 4mm thick) is located within the partition, around the structual opening to bear the load of the conveyor system. The conveyor system closure shall be face fixed and may be located on the exposed or unexposed side. 2. LPCB Ref 1064a/01 where the conveyor track penetrates the 160mm thick structural opening 1700mm (w) x 1500mm (h) a blockwork wall/panel is formed below (built from the finsihed floor level), minimum density 350kg/m3, 150mm thick, 800mm high and 2060mm wide, the top of the wall/panel is lined with a 20mm thick layer of Promatect-H board with the vertical edges protected with 100mm x 25mm x 3mm thick steel angles through fixed to the cross bar steel frame uprights (within the partition) at 200mm centres. A nominal 175mm opening is left around the conveyor track and blockwork wall/panel, this is built up with layers of Promatect-H25/H20/H15/H12 10 20 Oct 2014 PART 2: SECTION 1.1 FIREBREAK DOORS AND SHUTTERS 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. and H10, Promaseal-PL boards and Tenmat Firefly 102. Two 35mm lateral gaps are left between the boards and blockwork wall which are friction fitted with Rockwool type RPB9 minimum density 90kg/m3 to allow movement/expansion. LPCB Ref 1064a/01 and 1064a/02 The closure leaf is 'T' shaped and may be increased by a maximum of 15% in height and/or 15% in width provided the surface area of the leaf is not increased by more than 20% from the dimensions given in the table above. The leaf may not be reduced by more than 50% in width and 75% in height. LPCB Ref 1064a/02 - Standard low density rigid wall construction according to BS EN 1366-7, table no 2, with a minimum density of 613kg/m3. The conveyor system closure shall be face to face fixed and may be located on the exposed or unexposed side. LPCB Ref 1064a/02 where the conveyor track penetrates the 200mm thick structural opening 1700mm (w) x 1500mm (h), a blockwork wall/panel is formed below minimum density 350kg/m3, 150mm thick and supported 300mm above the finished floor level with 4 x 300mm and 1 x 500mm L profile fixing brackets 150mm x 100mm x 10mm thick with threaded rods and nuts (M10). The top of the wall/panel is lined with a 20mm thick layer of Promatect-H board with the vertical edges protected with 100mm x 25mm x 3mm thick steel angles though fixed back to the 200mm thick wall at 200mm centres. A nominal 175mm opening is left around the conveyor track and blockwork wall/panel, this is built up with layers of Promatect-H25/H20/H15/H12 and H10, Promaseal-PL boards and Tenmat Firefly 102. Two 35mm lateral gaps are left between the boards and blockwork wall which are friction fitted with Rockwool type RPB9 minimum density 90kg/m3 to allow movement/expansion. LPCB Ref 1064a/02 the penetration seal may incorporate a cable penetration, with maximum penetration size of 60mm x 220mm x 175mm (thickness x height x depth). The penetration must be lined with 20mm Promatect-H boards and the perimeter of the opening sealed with one layer of Tenmat Firefly 102, all control cables must then individually pass through a mineral wool batt (Rockwool RPB9 minimum density 90kg/m3) which is held in place within the penetration with EMPE glue. LPCB ref No. 1064a/03 where the conveyor track penetrates the 200mm thick supporting construction a recess 175mm deep is formed in the base of the 3000mm x 3000mm structural opening, a blockwork wall/panel 150mm thick is formed supported 260mm below the structural opening with 5 x 500mm and 2 x 300mm L profile fixing brackets 150mm x100mm x 10mm thick with threaded rods and nuts (M10).The top of the wall/panel is lined with a 20mm thick layer of Promatect-H board with the vertical edges protected with 100mm x 25mm x 3mm thick steel angles through fixed back to the 200mm thick supporting construction. A nominal 60mm gap is left around the vertical sides with a nominal 120mm gap left on the underside of the conveyor track and blockwork wall, this is built up with layers of Promatect-H25/H20/H15, Promaseal-PL boards and Tenmat Firefly 102. Two 35mm lateral gaps are left between the boards and blockwork wall which are friction fitted with Rockwool type RPB9 minimum density 90kg/m3 to allow movement /expansion. The conveyor system closure shall be face fixed and may be located on the exposed side only. LPCB ref No. 1064a/04 where the conveyor track penetrates the 160mm thick supporting construction 3000mm (w) x 3000mm (h) a blockwork wall/panel is formed below (built from the finished floor level), minimum density 350kg/m3, 150mm thick, 1240mm high and 3545mm wide, the top of the wall/panel is lined with a 20mm thick layer of Promatect-H board with the vertical edges protected with 100mm x 25mm x 3mm thick steel angles through fixed to the cross bar steel frame uprights (within the partition) at 100mm centres. A recess positioned centrally 388mm deep x 1066mm long is formed on the top of the wall to accommodate the conveyor. A nominal 200mm opening is left around the conveyor track and blockwork wall/panel, this is built up with layers of Promatect-H25/H20/H15/H12 and H10, Promaseal-PL boards and Tenmat Firefly 102. Two 35mm lateral gaps are left between the boards and blockwork wall which are friction fitted with Rockwool type RPB9 minimum density 90kg/m3 to allow movement /expansion. The conveyor system closure shall be face fixed and may be located on the un-exposed side only. LPCB ref No. 1064a/05 where the conveyor track penetrates the 240mm thick supporting construction a recess 110mm deep x 695mm long is formed in the base of the 3000mm x 3000mm structural opening, a blockwork wall/panel 150mm thick is formed and supported 480mm below the structural opening with 5 x 500mm and 2 x 300mm L profile fixing brackets 150mm x100mm x 10mm thick with threaded rods and nuts (M10).The top of the wall/panel is lined with a 20mm thick layer of Promatect-H board with the vertical edges protected with 100mm x 25mm x 3mm thick steel angles through fixed back to the 240mm supporting construction. A nominal 60mm gap is left around the vertical sides and underside of the conveyor track and blockwork wall, this is built up with layers of Promatect-H25/H20/H15/H12/H10, Promaseal-PL boards and Tenmat Firefly 102. Two 35mm lateral gaps are left between the boards and blockwork wall which are friction fitted with Rockwool type RPB9 minimum density 90kg/m3 to allow movement /expansion. The conveyor system closure shall be face fixed and may be located on the exposed side only. LPCB ref No. 1064a/06 The locking mechanism for the ECClos-Flex system is located at the base of the structural opening and is fixed to the supporting construction via a Z section and continuous 10mm-thick x 268mm high Durasteel plate section. The conveyor system closure shall be face fixed and may be located on the exposed side only. LPCB ref No. 1064a/06 The chain conveyor track system where it penetrates the locking mechanism (see note 10) consists of a C profile 105 x 56 x 3mm surrounded on three sides with 12.5mm fireproof gypsum plaster board through fixed to Durasteel board using brackets and 5mm blind steel rivets, the inside of the C section is packed with layers of intumescent fabric (Heliotex EW 120), or alternatively a C profile 105 x 56 x 3mm surrounded by two layers of intumescent fabric (Heliotex EW 120), fixed using metal strips to the Durasteel board. LPCB ref No. 1064a/06 The belt conveyor track system (450mm x 105mm) where it penetrates the locking mechanism (see note 10) is protected up to a depth of 70mm with calcium silicate boards which are fastened to the Durasteel locking mechanism using brackets and 5mm thick blind steel rivets. Where there are gaps between the conveyor track and the calcium silicate boards (approx 4mm) they are lined with a layer of Tenmat firefly 102. LPCB ref No. 1064a/06 The chain conveyor track system where it penetrates the locking mechanism (see note 10) consists of a C profile 105 x 56 x 3mm surrounded on three sides with mineral wool minimum density 150kg/m3, the mineral wool has a 20mm deep channel cut out and is inserted tightly onto the Durasteel board, the inside of the C section is packed with mineral wool, where there are gaps between the conveyor track and mineral wool (approx 4mm) they are lined with a layer of Tenmat firefly 102. To view the applicable drawing, please click on the product name in the entry on www.RedBookLive.com 20 Oct 2014 11 PART 2: SECTION 1.1 FIREBREAK DOORS AND SHUTTERS Sunray Engineering Limited Kingsnorth Industrial Estate, Wotton Road, Ashford, Kent TN23 6LL, United Kingdom Tel: +44 (0)1233 639039 • Fax: +44 (0)1233 625137 E-mail: [email protected] • Website: www.sunraydoors.co.uk Certificate No: 234b to LPS 1056: Issue 6.1 Product Name Door Type Max Height (m) Max Width (m) Max Area 2 ) Vision panel glass type ExcluDoor 4 ExcluDoor 4 Mk2 FR Single-leaf hinged door Single-leaf hinged door Single-leaf hinged door Single-leaf hinged door Single-leaf hinged door Double-leaf hinged door Double-leaf hinged door Unequal width Double-leaf hinged door Unequal width Double-leaf hinged door Double-leaf hinged door 2.250 1.050 2.400 - 2.350 1.155 2.71 2.350 1.155 2.71 ExcluDoor Mk2 FR ExcluDoor 4 Mk2 FR 2.702 1.328 3.25 2.702 1.328 3.25 Vision panel maximum clear view height (mm 2) - Vision panel maximum clear view width (mm 2) - Vision panel maximum clear view area (m 2) - ExcluGlass 4 Vision Panel - 280 380 - - ExcluGlass 4 Vision Panel - 280 380 0.1064 60 / 0 - - - 180 / 0 ExcluGlass 4 Vision Panel - 280 380 0.1064 60 / 0 - - - 240 / 0 Fire resistance (min BS 476: Part 22Integrity / Insulation 30 / 0 LPCB Ref. No. 0.1064 60 / 0 234b/02 - 240 / 0 2.702 1.328 3.25 2.702 1.328 3.25 2.702 1.328 3.25 ExcluGlass 4 Vision Panel 280 380 0.1064 60 / 0 2.702 1.328 3.25 - - - - 240 / 0 2.350 1.155 5.42 ExluGlass 4 Vision Panel 280 380 0.1064 60 / 0 234b/01 234b/03 234b/06 Notes: For BS 476: Part 22 applications 1. LPCB Ref: 234b/01, this product achieved an integrity rating of 120 minutes when tested opening towards the furnace with the deadlocks engaged. 2. LPCB Ref 234b/01, 234b/02, 234b/03 and 234b/06 are also certified to Security Rating 4 against the requirements of LPS 1175. 3. Sunray Engineering Ltd is also approved to LPS 1271 for installation of fire and security doors, see approval listing for details. 4. LPCB Ref No. 234b/02, 234b/03, and 234b/06, Doorsets are approved to withstand a fire exposure to the closing side only as detailed in BRE Assessment CC 285805B 5. LPCB Ref No. 234b/02, 234b/03 and 234b/06, may be fitted with one or more Eurospec SWE1010 stainless steel door viewers. 6. LPCB Ref No 234b/02, 234b/03 and 234b/06, the ExcluDoor 4 Mk2, double leaf doorset, may have a vision panel installed in either the passive or the active leaf. Certificate No: 234b to LPS 1056: Issue 6.1 Product Name Door Type Max leaf Height (m) Max leaf Width (m) Max leaf Area 2 ) Vision panel glass type Vision panel maximum clear view height (mm 2) Vision panel maximum clear view width (mm 2) Vision panel maximum clear view area 2) ExcluDoor 4, Mk2 FR ExcluDoor 4 Mk2 FR Single-leaf hinged door Single-leaf hinged door Single-leaf hinged door Single-leaf hinged door Double-leaf hinged door Double-leaf hinged door Unequal width Double-leaf hinged door Unequal width Double-leaf hinged door 2.350 1.155 2.71 280 380 0.1064 2.350 1.155 2.71 ExcluGlass 4 Vision Panel - Fire resistance (min) EN 1634-1:2008 Integrity / Insulation 60 / 0 - - - 240 / 0 2.702 1.328 3.25 380 0.1064 60 / 0 1.328 3.25 ExcluGlass 4 Vision Panel - 280 2.702 - - - 180 / 0 2.702 1.328 3.25 380 0.1064 60 / 0 1.328 3.25 ExcluGlass 4 Vision Panel - 280 2.702 - - - 240 / 0 2.702 1.328 3.25 ExcluGlass 4 Vision Panel 280 380 0.1064 60 / 0 2.702 1.328 3.25 - - - - 240 / 0 12 LPCB Ref. No. 234b/02 234b/03 20 Oct 2014 PART 2: SECTION 1.1 FIREBREAK DOORS AND SHUTTERS Product Name ExcluDoor 3 Mk3 FR Door Type Double-leaf hinged door Single-leaf hinged door Single-leaf hinged door Double-leaf hinged door Double-leaf hinged door Unequal width Dobule-leaf hinged door Unequal width Double-leaf hinged door Max leaf Height (m) Max leaf Width (m) Max leaf Area 2 ) Vision panel glass type Vision panel maximum clear view height (mm 2) Vision panel maximum clear view width (mm 2) Vision panel maximum clear view area 2) ExcluGlass 4 Vision Panel - 280 380 - - ExcluGlass 4 Vision Panel - 280 380 - ExcluGlass 4 Vision Panel - 280 - ExcluGlass 4 Vision Panel 280 2.350 1.155 5.42 2.350 1.155 2.71 2.350 1.155 2.71 2.350 1.155 5.42 2.350 1.155 2.71 2.350 1.155 5.42 2.350 1.155 5.42 LPCB Ref. No. 0.1064 Fire resistance (min) EN 1634-1:2008 Integrity / Insulation 60 / 0 - 240 / 0 234b/04 0.1064 240 / 0 - - 340 / 0 380 0.1064 60 / 0 - - 240 / 0 380 0.1064 60 / 0 234b/06 234b/05 Notes: For EN 1634-1:2008 applications 1. LPCB Ref: 234b/02, 234b/03, 234b/04, 234b/05 and 234b/06 doorsets may be fitted with a plain outer face so that there is no method of external access. 2. LPCB Ref: 234b/02, 234b/03, 264b/04, 234b/05 and 234b/06 are also certificated to Security Rating 4 against the requirements of LPS 1175. 3. Sunray Engineering Ltd is also approved to LPS 1271 for installation of fire and security doors, see approval listing for details. 4. LPCB ref no 234b/02, 234b/03, 234b/04, 234b/05 and 234b/06, Doorsets are approved to withstand a fire exposure to the closing side only as detailed in BRE Assessment CC 285805A 5. LPCB ref no 234b/02, 234b/03, 234b/04, 234b/05 and 234b/06 may be fitted with one or more Eurospec SWE1010 stainless steel door viewers. 6. LPCB ref no 234b/02, 234b/032, 234b/04, 234b/05 and 234b/06, the ExcluDoor 4 MK2, double leaf doorsets, may only have the vision panel installed in the active leaf. 7. LPCB Ref: 234b/02, 234b/03, 234b/04, 234b/05 and 234b/06, Doorsets are approved with the following Surelock Slimline three-point lock system as shown below. 20 Oct 2014 13 PART 2: SECTION 1.1 FIREBREAK DOORS AND SHUTTERS Entry Description Code Key 3-point bolting 3-point bolting 3-point deadlocking 3-point deadlocking 3-point deadlocking 3-point deadlocking 3-point deadlocking 3-point deadlocking 3-point deadlocking 3-point deadlocking 3-point deadlocking 3-point deadlocking 3-point deadlocking 3-point deadlocking 3-point deadlocking 3-point deadlocking 3-point deadlocking SL304 SL305 * * SL301 Access control Exit Combination Key Turnknob Access control Panic Emergency SL303 SL310 SL311 SL313 SL314 SL315 SL320 * SL321 * SL322 * SL323 * SL324 * SL325 * SL330 SL335 - included as standard * - optional enhancement Technocover Limited (incorporating TechnoRail and Strataform) Henfaes Lane, Welshpool, Powys SY21 7BE, United Kingdom Tel: +44 (0)1938 555511 • Fax: +44 (0)1938 555527 E-mail: [email protected] • Website: www.technocover.co.uk Certificate No: 450g to LPS 1056: Issue 6 Product Name Door Type Maximum Leaf Size Height (mm) Maximum Leaf Size Width (mm) Maximum Leaf Size (m2 Door Hardware Variations Sentinel UltraSecure DS1/LV Single leaf outward opening hinged doorset uninsulated 2200 940 2.06 SM3,SM4,SM6,SM7, SM8,SM10,SM13,SM14, SM16,SM17,SM18,SM20 SM23,SM24,SM26,SM27, SM28 & SM30. 14 BS476: Part 22 Fire resistance (minutes) Integrity 240 BS476: Part 22 Fire resistance (minutes) Insulation 0 LPCB Ref. No. 450g/01 20 Oct 2014 PART 2: SECTION 1.1 FIREBREAK DOORS AND SHUTTERS Product Name Door Type Maximum Leaf Size Height (mm) Maximum Leaf Size Width (mm) Maximum Leaf Size (m2 Door Hardware Variations BS476: Part 22 Fire resistance (minutes) Integrity 120 BS476: Part 22 Fire resistance (minutes) Insulation 0 LPCB Ref. No. DS1/LV Single leaf outward opening hinged doorset uninsulated DS2/LV Double leaf outward opening hinged doorset uninsulated DS2/LV Double leaf outward opening hinged doorset uninsulated 2640 1128 2.58 SM3,SM4,SM6,SM7, SM8,SM10,SM13,SM14, SM16,SM17,SM18,SM20 SM23,SM24,SM26,SM27, SM28 & SM30. 2768 1218 2.80 SM3,SM4,SM6,SM7, SM8,SM10,SM13,SM14, SM16,SM17,SM18,SM20 SM23,SM24,SM26,SM27, SM28 & SM30. 120 0 450g/02 2215 975 2.15 SM3,SM4,SM6,SM7, SM8,SM10,SM13,SM14, SM16,SM17,SM18,SM20 SM23,SM24,SM26,SM27, SM28 & SM30. 240 0 Notes: 1. The Sentinel UltraSecure Doorsets are also certified to Security Level 3 & 4 against the requirements of LPS1175: Issue 6. 2. LPCB ref 450g/01 & 450g/02, for approved Door Hardware Variations please refer to Manufacturer's Technical Literature. 3. LPCB ref 450g/01 & 450g/02, the Sentinel UltraSecure Doorsets are approved when installed in concrete/masonry walls or drywall partitions. 20 Oct 2014 15 PART 2: SECTION 1.2 LIFT LANDING DOORS This section lists lift landing doors approved to LPS 1056 Test and Evaluation requirements for the LPCB Approval and Listing of Fire Doorsets, Lift Landing Doors and Shutter Assemblies. LPS 1056 is based upon relevant BS or European test criteria and not only looks at the fire integrity and insulation (where applicable) but also includes reliability cyclic tests and grading. Currently there are no products listed in this section. 16 20 Oct 2014 PART 2: SECTION 2 FIRE AND SECURITY DOOR AND SHUTTER INSTALLERS This section lists companies approved to LPS 1271 Requirements for LPCB Approval and Listing of companies installing fire and security doors, doorsets, shutters and smoke/fire barriers. This standard was developed to ensure that the product performance is not compromised by poor installation of the fire or security door or shutter. This section includes manufacturers installing doors and independent installation companies. The latest version is LPS 1271: Issue 2. Information regarding the security of doors is available in Part 4: Section 5. Avert Fire (UK) Ltd P O Box 248, Dawes lane, Scunthorpe DN16 1DW, United Kingdom Tel: +44 (0)1724 853712 • Fax: +44 (0)1724 278848 E-mail: [email protected]; [email protected] • Website: www.avertfire.co.uk Certificate No. 850PIa to LPS 1271 Issue 1 Approved installer of certified fire doors and doorsets Checkmate Fire Solutions Ltd Unit 1, Woodgates Farm, Woodgates End, Dunmow, Essex CM6 2BN, United Kingdom Tel: +44( 0)1279 850021 • Fax: +44( 0)1279 850061 E-mail: [email protected] • Website: www.checkmatefire.com Head Office Royd House, 11 Birds Royd Lane, Brighouse, West Yorkshire HD6 1LQ, United Kingdom Tel: 01484 721154 • Fax: 01484 723152 Southern Office Unit 1, Woodgates Farm, Woodgates End, Dumow, Essex CM6 2BN, United Kingdom Tel: 01279 850021 • Fax: 01279 850261 E-mail: [email protected] • Website: www.checkmatefire.com Certificate No. 860PIb to LPS 1271: Issue 2 Approved installer of: - Fire Doors and Doorsets Clark Door Limited Unit F Central, Kingmoor Park, Carlisle, Cumbria CA6 4SJ, United Kingdom Tel: +44 (0)1228 522321 • Fax: +44 (0)1228 401854 E-mail: [email protected] • Website: www.clarkdoor.com Certificate No. 106b to LPS 1271: Issue 1 Approved installer of Fireman series of fire rated doorsets. 20 Oct 2014 17 PART 2: SECTION 2 FIRE AND SECURITY DOOR AND SHUTTER INSTALLERS Esprit UK Limited Esprit House, Spon Lane, West Bromwich B70 6AA, United Kingdom Tel: 0121 580 0021 • Fax: 0121 580 0030 E-mail: [email protected] • Website: www.esprituk.com Certificate No. 1240PIb to LPS 1271: Issue 2.1 Approved installer of: - Fire Doors and Doorsets Grange Door Systems Unit 12, Bilston Glen Industrial Estate, Edinburgh EH20 9LZ, United Kingdom Tel: +44 (0)131 440 7000 • Fax: +44 (0)131 440 7003 E-mail: [email protected] • Website: www.grangedoor.com Certificate No. 573b to LPS 1271: Issue 1 Approved installer of Kenrick Fire Stopper Face-fixed rolling shutter (LPCB Ref No 477a/01) Gunfire Trading Divison of Gunite (Eastern) Limited Endeavour House, Compass Point, St Ives, Cambridgeshire PE27 5JL, United Kingdom Tel: +44 (0)1480 466880 • Fax: +44 (0)1480 308999 E-mail: [email protected] • Website: www.gunite.co.uk Certificate No. 848PIa to LPS 1271: Issue 1 Approved installer of certified fire doors and doorsets Hart Door Systems Redburn Road, Westerhope Industrial Estate, Westerhope, Newcastle upon Tyne NE5 1PJ, United Kingdom Tel: +44 (0)191 214 0404 • Fax: +44 (0)191 271 1611 E-mail: [email protected] • Website: www.hartdoors.com Certificate No. 016b to LPS 1271: Issue 1 Approved installer of Firebrand fire rated rolling shutters. Industrial Door Engineering Limited Winnington Avenue, Winnington, Northwich, Cheshire CW8 4EQ, United Kingdom Tel: +44 (0)1606 871832 • Fax: +44 (0)1606 871482 E-mail: [email protected] • Website: www.industrial-door-eng.co.uk Certificate No. 165c to LPS 1271: Issue 1 Approved installer of Sentry, Sentry 1, Sentry 1 Compact and Sentry 2 fire rated rolling shutters. 18 20 Oct 2014 PART 2: SECTION 2 FIRE AND SECURITY DOOR AND SHUTTER INSTALLERS Kone PLC Global House, Station Place, Chertsey, Surrey KT16 9HW, United Kingdom Tel: +44 (0)8451 999 999 • Fax: +44 (0)870 7701144 E-mail: [email protected] • Website: www.kone.co.uk Helpdesk KONE ONE KONE PLC, Global House, Station Place, Chertsey, Surrey KT16 9HW, United Kingdom Tel: +44 (0)8451 999 999 • Fax: +44 (0)870 770 114 E-mail: [email protected] • Website: www.kone.co.uk Certificate No. 122P to LPS 1271: Issue 1 Installation of Certified fire rated Rolling Shutters, Hinged Doorsets and Lift Landing Sliding Folding Shutters Full UK Coverage Manning Construction Limited Brodawel, Coychurch, Bridgend, CF35 5BU, United Kingdom Tel: 01656 862333 • Fax: 01656 861439 E-mail: [email protected] • Website: www.manning-online.com Certificate No. 1141PI to LPS 1271: Issue 1 Approved installer of certified fire doors and shutters Mercian Shutters Limited Pearsall Drive, Brades Road Industrial Estate, Oldbury, West Midlands B69 2RA, United Kingdom Tel: +44 (0)121 544 6124 • Fax: +44 (0)121 552 6793 E-mail: [email protected] • Website: www.merciandoors.co.uk Also at: Mercian Industrial Doors (Southern) Limited, t/a Mercian Industrial Doors Southern, 10-12 Galleymead Road, Colnbrook, Slough, Berkshire SL3 0EN, United Kingdom Certificate No. 355c to LPS 1271: Issue 1 Approved installer of SF series of fire rated rolling shutters. Nene Valley Fire and Acoustic Limited 2a New Street, Irthlingborough, Northamptonshire NN9 5UG, United Kingdom Tel: +44 (0) 1933 650650 • Fax: +44 (0) 1933 650001 E-mail: [email protected] • Website: www.nenevalleyfireandacoustic.com Certificate No. 1021PIb to LPS 1271 Issue 1 Approved Installer of certified fire doors and doorsets 20 Oct 2014 19 PART 2: SECTION 2 FIRE AND SECURITY DOOR AND SHUTTER INSTALLERS Prestige Fire Door Services Limited 15 Kings Road, Fleet, Hampshire GU51 3DH, United Kingdom Tel: +44 (0)1252 645534 • Fax: +44 (0)1252 678742 E-mail: [email protected] • Website: www.prestigefiredoorservices.com Certificate No. 1066PI to LPS 1271: Issue 1 Approved Installer of certified fire doors and doorsets Safe Partnership 3 East Street, Wareham, Dorset BH20 4NN, United Kingdom Tel: +44 (0)1929 551100 • Fax: +44 (0)1929 553300 E-mail: [email protected] • Website: www.safepartnership.co.uk Certificate No. 835c to LPS 1271: Issue 1 Approved installer of Safe Partnership Ltd Safe Door timber security doors as approved under LPS 1175 (Ref Certificate 835a). Sunray Engineering Limited Kingsnorth Industrial Estate, Wotton Road, Ashford, Kent TN23 6LL, United Kingdom Tel: +44 (0)1233 639039 • Fax: +44 (0)1233 625137 E-mail: [email protected] • Website: www.sunraydoors.co.uk Certificate No. 234e to LPS 1271: Issue 1 Approved installer of certified Sunray, ExecDoor 1, ExecDoor 2, ExcluDoor 3, ExcluDoor 3 Mk2, ExcluDoor 3 Mk2 FR, ExcluDoor 3 Mk3 FR, ExcluDoor 4. ExcluDoor 4 Mk2 FR. ExcluDoor4 Mk3, ExcluDoor 5 and ExcluDoor 6 (Ref product certificates 234b, 234c and 234d) 20 20 Oct 2014 PART 2: SECTION 3 INSPECTION, REPAIR AND MAINTENANCE OF FIRE AND SECURITY DOORS AND SHUTTERS This section lists companies approved to LPS 1197 Requirements for LPCB Approval and Listing of companies inspecting, repairing and maintaining fire and security doors, doorsets, shutter and active smoke/fire barriers. The long term performance of products covered in this standard is dependent upon regular inspection, repair and maintenance in accordance with the manufacturer’s recommendations. Companies approved to LPS 1197 have demonstrated their ability to carry out this work effectively. The listings include the geographical areas and products covered by the companies and the level of service provided. The latest version is LPS 1197: Issue 4.1. Ascot Doors Limited Britannia Way Industrial Park, Union Road, Bolton BL2 2HE, United Kingdom Tel: +44 (0)1204 545801 • Fax: +44 (0)1204 545800 E-mail: [email protected] • Website: www.ascotdoors.co.uk Certificate No. 131c to LPS 1197 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service Yes Yes Yes Yes On site within 4 hours of all of England, Scotland and Wales. Assa Abloy Entrance Systems Limited Central & Southern UK 7 Churchill Way, 35A Business Park, Chapeltown, Sheffield, South Yorkshire S35 2PY, United Kingdom Tel: +44 (0)870 609 4474 • Fax: +44 (0)114 257 4397 E-mail: [email protected] • Website: www.crawfordsolutions.uk.com Certificate No. 001c to LPS 1197 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service Yes Yes Yes Yes Out of office hours: Tel: +44 (0)1244 355235. Assa Abloy Entrance Systems Limited Northern UK First Floor, Cedar House, Quarrywood Court, Livingston, West Lothian EH54 6AX, United Kingdom Tel: +44 (0)1506 417237 • Fax: +44 (0)1506 412726 E-mail: [email protected] • Website: www.crawfordsolutions.uk.com Certificate No. 001c/02 to LPS 1197 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service 20 Oct 2014 Yes Yes Yes Yes 21 PART 2: SECTION 3 INSPECTION, REPAIR AND MAINTENANCE OF FIRE AND SECURITY DOORS AND SHUTTERS Out of office hours: Tel: +44 (0)1244 355235. Avert Fire (UK) Ltd P O Box 248, Dawes lane, Scunthorpe DN16 1DW, United Kingdom Tel: +44 (0)1724 853712 • Fax: +44 (0)1724 278848 E-mail: [email protected]; [email protected] • Website: www.avertfire.co.uk Certificate No. 850PIb to LPS 1197: Issue 3.0 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service Yes Yes No No Approved installer of certified fire doors and doorsets. Checkmate Fire Solutions Ltd Unit 1, Woodgates Farm, Woodgates End, Dunmow, Essex CM6 2BN, United Kingdom Tel: +44( 0)1279 850021 • Fax: +44( 0)1279 850061 E-mail: [email protected] • Website: www.checkmatefire.com Head Office Royd House, 11 Birds Royd Lane, Brighouse, West Yorkshire HD6 1LQ, United Kingdom Tel: 01484 721154 • Fax: 01484 723152 Southern Office Unit 1, Woodgates Farm, Woodgates End, Dunmow, Essex CM6 2BN, United Kingdom Tel: 01279 850021 • Fax: 01279 850261 E-mail: [email protected] • Website: www.checkmatefire.com Certificate No. 860PIa to LPS 1197: Issue 4.1 Company assessed and approved for: - Inspection - Maintenance services and 'one off' general repair Of: Fire resistant doors and doorsets Product groups: Hinged and pivoted timber doorsets DoorCheck Limited Unit 1 Granary Court, 9-19 High Road, Chadwell Heath, Romford RM6 6PY, United Kingdom Tel: 0208 590 0234 • Fax: 0208 590 0234 E-mail: [email protected] • Website: www.door-check.co.uk Certificate No. 1119PI to LPS 1197: Issue 4.1 General servicing and maintenance of fire doors and fire doorsets Company assessed and approved for: - Inspection - Maintenance services and 'one off' general repair 22 20 Oct 2014 PART 2: SECTION 3 INSPECTION, REPAIR AND MAINTENANCE OF FIRE AND SECURITY DOORS AND SHUTTERS Of: Fire resistant doors and doorsets Product groups: Hinged and pivoted timber doorsets Esprit UK Limited Esprit House, Spon Lane, West Bromwich B70 6AA, United Kingdom Tel: 0121 580 0021 • Fax: 0121 580 0030 E-mail: [email protected] • Website: www.esprituk.com Certificate No. 1240PIa to LPS 1197: Issue 4.2 Company assessed and approved for: - Inspection - Maintenance services and 'one off' general repair Of: Fire resistant doors and doorsets Product groups: Hinged and pivoted timber doorsets Fire Safety Services (UK) Limited Progress House, 15 Railton Road, Woburn Road Industrial Estate, Kempston, Bedford MK42 7PW, United Kingdom Tel: 01234 854100 • Fax: 01234 840777 E-mail: [email protected] • Website: www.firesafetyservices.co.uk Certificate No. 1145PIb to LPS 1197: Issue 3.0 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service Yes Yes No No Service and maintenance of fire doors Grange Door Systems Unit 12, Bilston Glen Industrial Estate, Edinburgh EH20 9LZ, United Kingdom Tel: +44 (0)131 440 7000 • Fax: +44 (0)131 440 7003 E-mail: [email protected] • Website: www.grangedoor.com Certificate No. 573a to LPS 1197LPS 1197: Issue 3 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service Yes Yes Yes Yes On site within 4 hours of call in Scotland, Cumbria, North Lancashire, Teesside and Tyneside. 20 Oct 2014 23 PART 2: SECTION 3 INSPECTION, REPAIR AND MAINTENANCE OF FIRE AND SECURITY DOORS AND SHUTTERS Industrial Door Engineering Limited Winnington Avenue, Winnington, Northwich, Cheshire CW8 4EQ, United Kingdom Tel: +44 (0)1606 871832 • Fax: +44 (0)1606 871482 E-mail: [email protected] • Website: www.industrial-door-eng.co.uk Certificate No. 165b to LPS 1197: Issue 3 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service Yes Yes Yes Yes On site within 4 hours of call in Cheshire, Clwyd, Derbyshire, Greater Manchester, Gwynedd, Lancashire, Merseyside and Yorkshire. Kone PLC Global House, Station Place, Chertsey, Surrey KT16 9HW, United Kingdom Tel: +44 (0)8451 999 999 • Fax: +44 (0)870 7701144 E-mail: [email protected] • Website: www.kone.co.uk Helpdesk KONE ONE KONE PLC, Global House, Station Place, Chertsey, Surrey KT16 9HW, United Kingdom Tel: +44 (0)8451 999 999 • Fax: +44(0)870 770 1144 E-mail: [email protected] • Website: www.kone.co.uk Certificate No. 122n to LPS 1197 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service Yes Yes Yes Yes Onsite within 4 hours of call, Full UK Coverage Konecranes Industrial Door Services Unit 1B, Sills Road, Willow Farm Business Park, Castle Donnington, Leicestershire DE74 2US, United Kingdom Tel: 0844 5611 007 • Fax: 01332 5697781 E-mail: [email protected] • Website: www.konecranes.com Certificate No. 908a to LPS 1197: Issue 3 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service Yes Yes Yes Yes On site within 4 hours of call in West Midlands, Staffordshire, Hereford, Worcester, Warwickshire, Milton Keynes, Northamptonshire, Peterborough, Lincolnshire, Nottinghamshire, Derbyshire, South Yorkshire and Leicestershire. 24 20 Oct 2014 PART 2: SECTION 3 INSPECTION, REPAIR AND MAINTENANCE OF FIRE AND SECURITY DOORS AND SHUTTERS L.B.S. Group (incorporating L.B.S Security Services Limited - t/a Specialized Door Services, Russell Shutters, Olsen Shutters and Ranford Doors) Unit 6, Sterling Trading Estate, Rainham Road South, Dagenham, Essex RM10 8TX, United Kingdom Tel: +44 (0)208 526 8572 • Fax: +44 (0)208 984 0378 E-mail: [email protected] • Website: www.lbsgroup.co.uk Certificate No. 247a to LPS 1197LPS 1197: Issue 3 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service Yes Yes Yes Yes On site within 4 hours of call-out in Bedfordshire, Berkshire, Buckinghamshire, Cambridgeshire, Essex, Hampshire, Hertfordshire, Kent, London, Norfolk, Northamptonshire, Oxfordshire, Suffolk, Surrey, East Sussex, West Sussex. Mercian Shutters Limited Pearsall Drive, Brades Road Industrial Estate, Oldbury, West Midlands B69 2RA, United Kingdom Tel: +44 (0)121 544 6124 • Fax: +44 (0)121 552 6793 E-mail: [email protected] • Website: www.merciandoors.co.uk also at: Mercian Industrial Doors (Southern) Limited, t/a Mercian Industrial Doors Southern, 10-12 Gallymead Road, Colnbrook, Slough, Berkshire SL3 0EN, United Kingdom Certificate No. 355a to LPS 1197: Issue 3 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service Yes Yes Yes Yes On site within 4 hours of call in Hereford and Worcestershire, Shropshire, Staffordshire, Warwickshire and West Midlands. Nene Valley Fire and Acoustic Limited 2a New Street, Irthlingborough, Northamptonshire NN9 5UG, United Kingdom Tel: +44 (0) 1933 650650 • Fax: +44 (0) 1933 650001 E-mail: [email protected] • Website: www.nenevalleyfireandacoustic.com Certificate No. 1021PIa to LPS 1197: Issue 3.0 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service Yes Yes No No General servicing and maintenance of fire doors and fire doorsets 20 Oct 2014 25 PART 2: SECTION 3 INSPECTION, REPAIR AND MAINTENANCE OF FIRE AND SECURITY DOORS AND SHUTTERS Safe Partnership 3 East Street, Wareham, Dorset BH20 4NN, United Kingdom Tel: +44 (0)1929 551100 • Fax: +44 (0)1929 553300 E-mail: [email protected] • Website: www.safepartnership.co.uk Certificate No. 835b to LPS 1197: Issue 3 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service Yes No Yes No Scope: Area of cover, all regions of England, Wales and Northern Ireland. Maintenance and repair of Safe Partnership Ltd Safe Door timber security doors approved to LPS 1175 (Ref cert. 835a) only. Response service arising from perpetrators attempting or gaining entry into sanctuary or safe room based on agreed priority system. Stanair Industrial Door Services Limited 2 Henson Way, Telford Way Industrial Estate, Kettering, Northamptonshire NN16 8PX, United Kingdom Tel: +44 (0)1536 482187 • Fax: +44 (0)1536 411799 E-mail: [email protected] • Website: www.stanair.co.uk Certificate No. 141a to LPS 1197- Issue 3 General servicing/maintenance Maintenance contracts 24 hour answering service 24 hour emergency service Yes Yes Yes Yes On site within 4 hours of call in Bedfordshire, Buckinghamshire, Cambridgeshire, Leicestershire, Northamptonshire. Tyco Fire and Integrated Solutions (the trading company for Tyco Fire and Integrated Solutions (UK) Limited and Tyco Fire and Integrated Solutions (Ireland) Limited) Tyco Park, Grimshaw Lane, Newton Heath, Manchester M40 2WL, United Kingdom Tel: +44 (0)161 205 2321 • Fax: +44 (0)161 455 4459 Website: www.tycofis.com Certificate No. 014c/01 to LPS 1197 General servicing/maintenance Maintenance contracts Yes 24 hour answering service Yes 24 hour emergency service Yes Yes On site within 4 hours of call in mainland UK. 26 20 Oct 2014
© Copyright 2024