1 curriculum vitae, cv - Laboratory of Process Control and Automation

1
CURRICULUM VITAE, CV
Name:
Date of Birth:
Address (work):
Home page:
Sirkka-Liisa Katriina Jämsä-Jounela
Nationality:
Finnish
th
April 6 , 1952, Haapajärvi
Marital Status: Married
Aalto University, Department of Biotechnology and Chemical Technology,
PO Box 16100, FI-00076 AALTO, FINLAND
http://kepo.hut.fi/
1. University Education and Training
Diploma Engineer (M.Sc. (Eng.)), University of Oulu, Department of Process Engineering, 1978.
Major subject: Process Control
Licentiate in Technology (Lic. Tech.), Helsinki University of Technology, Department of Electrical
Engineering, 1985, major subject: Control Engineering
Doctor of Science in Technology (D.Sc.(Tech.)), Helsinki University of Technology, Department
of Electrical Engineering, 1990, Major subject: Control Engineering “ Modern Approaches to
Control of Mineral Processes”.
University of Utah, Department of Metallurgical Engineering, USA, 1987-1988 (PhD thesis work)
Helsinki School of Economics and Business Administration ( MBA-studies)
Glasgow University, Business School, UK (MBA-studies)
European Business School, Copenhagen, Denmark (MBA-studies)
2. Present and Previous Major Professional Appointments
Professor of Process Control, Aalto University, Department of Biotechnology and Chemical
Technology, Espoo, 2002Visiting Professor, University of Lorraine, France, June 2012
Acting Professor of Process Control, Helsinki University of Technology, Espoo, 1994-2002.
Docent, Helsinki University of Technology, Espoo, 1992Senior Consultant, Outokumpu Mintec Oy, Process Automation & Mineral Engineering, Espoo,
1991-1994.
Industrial Researcher, Academy of Finland and Kemira Oyj, 1987-1991.
Control Engineer, Kemira Engineering,1983-1987.
Research Scientist, Technical Research Centre of Finland, Electrical Engineering Laboratory,
1981-1983.
Software Engineer, K. Hiekkamäki Ky, 1978-1981.
Teaching Assistant, Helsinki University of Technology, 1980,1989
Research Assistant, Ovako Oyj, Imatra, 1977.
3. Membership in Scientific Societies and Committees
IFAC (International Federation of Automatic Control):
Vice President, 2005-2008.
Technical Board Chair, 2005-2008.
Council, Member, 2002-2008.
Technical Board, Vice Chair, 2002-2005.
Technical Committee on Automation in Mining, Mineral and Metal Processing, Chair, 1996-2002.
Technical Committee on Automation in Mining, Mineral and Metal Processing, member, 1992NPCG ( Nordic Process Control Group):
Board, Chair, 2008-2010.
Member, 2004 –
2
EUCA ( European Union Control Association):
Council, Member, 2009FACTE:
Finnish Academy of Technology, Member, 20074. Scientific Responsibilities
Editor:
Associate Editor of the IEEE Transactions on Control Systems Technology, 2005-2011.
Associate Editor for the Conference on Control and Fault tolerant systems, SysTol’10, 2010.
Associate Editor for IEEE MED’08, 2008.
Editor for the 14th Nordic Process Control Workshop, Espoo, 2007.
Guest Editor, Control Engineering Practice, 2004.
Editor for the IFAC Workshop on Automation in Mining, Mineral and Metal Processing, Finland,
August 2000.
Co-Editor, Volumes N and O for the IFAC 14 th World Congress, China, 1999.
Editor for the IFAc Workshop on Automation in Mining, Mineral and Metal Processing, Finland,
1991.
Advisor:
Member of the Advisory Board, ATP- Automation Technology in Practice, 2005
Member of International Program Committees:
2013
2012
2011
2010
2009
2008
2009
2008
2007
2006
Systol’13, Nice, France, October 2013
Nordic Process Control Workshop, Copenhagen, Denmark
th
10 ACD, Copenhagen, Denmark
IEEE, Croatia
EU Papyrus, Workshop,France
IEEE&ECC 2011, Orlando,USA
ACD 2011, Hungary
COSY 2011, Makedonia
Conference on Control and Fault Diagnosis, SysTol’10, Nice, France, October 2010.
ECC’09, Budapest,Hungary
7th workshop
11th IMEKO TC10 International Workshop on Technical Diagnostics, Monitoring and
Diagnostics for Safety, Quality and Effectiveness Budepest, HUNGARY, September 1011
IFAC MMM Workshop, Santiago.Chile.
ICANNGA’09, Kuopio,Finland 2009.
IFAC World Congress, Seoul, Korea
th
16 Mediterranean Conference on Control and Automation, June 25-26, Ajaccio,France.
Nordic Process Control Workshop, Espoo, Finland.
5th Workshop on Advanced Control and Diagnosis, Grenoble, 15-16. November.
th
12 Symposium on Automation in Mining, Mineral and Metal Processing, Quebec,
Canada.
IFAC Symposium on Cost Oriented Automation, 12-14 February, Cuba.
IFAC Symposium on Dynamics and Control of Process Systems, DYCOPS-8, 6-8.June,
Mexico.
4th Workshop on Advanced Control and Diagnosis (ACD 2006), 16-17.Nov, Nancy,
France
3
2004
2003
1999
2001
2003
2002
2001
2000
1999
1998
1997
1993
2nd Workshop on Networked Control System and Fault Tolerant Control, November 2325, Rende, Italy, Organized by NeCST, EU-IST-2004-004303.
IFAC 50th Anniversary, Heidelberg, Germany.
IFAC workshop ALSIS, Finland.
12th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'05
Saint- Etienne, France, 17-19.May.
IPC Vice Chair of the IFAC WORKSHOP MMM'2006 , Cracow, Poland, 20 - 22
September.
Vice Chair, IFAC World Congress, Prague, 2005.
1st Workshop on Networked Control System and Fault Tolerant Control, October 6-7th,
Ajaccio, FRANCE, Organized by NeCST, EU-IST-2004-004303.
International Conference Automatic Systems for Building the infrastructure in
Developing Countries”, October 3-5, Bansko, Bulgaria
International Conference on Informatics in Control, Automation and Robotics" (ICINCO),
IEEE, Portugal, April.
th
IPC Vice-chairman of the IFAC 11 Symposium on Automation in Mining, Mineral and
Metal processing, Nancy, France, September 8-10, 2004.
IFAC DYCOPS conference, the DYCOPS (Dynamics and Control of Process Systems)
Symposium, Boston, USA, July 5-7, 2004
1st African Control Conference, Council for Automation and Computation (SACAC),
Cape Town, South Africa, December 3-5 2003
IPC Chairman of the IFAC Workshop on New Technologies for Automation of
Metallurgical Industry, Shanghai, P.R. China, October 11-13, 2003.
IPC Chairman of the IFAC Workshop on Future trends in Mineral and Metal Processing,
Finland, August 22-24, 2000.
IPC Vice-chairman of the IFAC Symposium on Automation in Mining, Mineral and Metal
Processing, Japan, September 4-6, 2001.
IFAC Symposium on Advances in Control Education, Oulu, Finland, June 16-18, 20
IFAC Symposium, Fault Detection, Supervision and Safety for Technical ProcessesSAFEPROCESS 2003 Washington, USA, June 9-11, 2003.
th
Member of the IPC Subcommittee of the 15 IFAC World Congress, Barcelona Spain,
rd
3 International Conference on Intelligent Processing and Manufacturing of Materials,
Canada, 2
28th conference on automation and telecommunication in mines and processing plants,
Poland, June 14-17, 2000.
Member of the IPC Subcommittee of the 14 th IFAC World Congress, Beijing P.R. China,
July 5-9.
IFAC Symposium on Automation in Mining, Mineral and Metal Processing, Dusseldorf,
Germany, September 1-3,1998.
ASI´97 (IFAC Workshop on Automation in the Steel Industry: Current Practice and
Future.) Korea, July 16-18, 1997.
MCGM´93, Sheyang, China.
Reviewer of research Proposals:
2007
2006
2005
2002
2001
2000
1999
FT6 Project reviewer for EU/IST Embedded Systems
FP6 Project reviewer for EU/IST Embedded Systems
FP6 Project reviewer for EU/IST Embedded Systems
FP5 “Monitoring Expert” for EU/IST
Technical Projects Reviewer, EU/IHP Programme
Evaluator of the EU Growth Programme KA1
Evaluator of the EU Growth Programme KA1
Member of the extended panel of the Growth KA1&MAT
Evaluator of the EU Research Training Networks Programme (IHP)
CSIR, NRF South Africa;
4
Czech Science Foundation;
CONICYT, Chile
Academy of Finland
Swedish Foundation for Strategy Research
Invited Plenary Speaker:
2008
2007
2004
2003
2002
2001
2000
1994
1993
Automining 2008, Chile
IFAC Symposium on Cost Oriented Automation, Cuba
IFAC MMM 2004 Symposium, France
20 years Anniversary, IFAC-Beirat-Österreich.
IFAC World Congress 2002, Spain (milestone report)
IFAC MMM 2001 Symposium, Japan
Automatics and Informatics’2000, Bulgarian Union of Automatics and Informatics,
Bulgaria
Codelco-Chuquicamata automation seminar, Chile
APCOM´93 Montreal, Canada
Invited lectures:
Several invited lectures in Europe, Asia, USA and South America:
F.ex: University of Henri Poincare, France; Instituto Superico Technico, Portugal; East China
University of Technology, Shanghai; Zhejiang University, Hongzou; University of Maryland,USA ,..
External examiner and opponent of doctoral theses:
J. Lieslehto
T. Siimes
L. Yliniemi
J. Jaako
R. Tuunila
Ferdinando Roux Camisani-Calzolari
Jens Nyberg
Jean-Philippe Georges
Nina Salmela
Rami Rantanen
Beathe Furenes
Tero Ahonen
Aino Ropponen
Tampere University of Technology
Helsinki University of Technology
Oulu University
Oulu University
Lappeenranta University of Technology
University of Pretoria, South Africa
Oulu University
University of Henri Poincare, France
Lappeenranta University of Technology
Oulu University
NTNU Norway
Lappeenranta university
Tampere University of Technology
J. Lieslehto
L. Yliniemi
J.Nyberg
Jean-Philippe Georges
Nina Salmela
Xianghua Wei
Petteri Pulkkinen
Beathe Furenes
Tero Ahonen
Teemu Räsänen
Tampere University of Technology
Oulu University
Oulu University
University of Henri Poincare, France
Lappeenranta University of Technology
Tampere University of Technology
Tampere University of Technology
NTNU, Norway
Lappeenranta university
Oulu University
5
Evaluated candidates for docentship and professorship:
M. Kurki
P. Gelad
L.Yliniemi
J. Kovacs
Oulu University
University of Vaasa
University of Oulu
University of Oulu
Dr S. Won
Pohang University of Science and Technology
POSTECH, South Korea
University of Pretoria, South Africa
NTNU, Norway
UMB, Norway
Department of Chemical Engineering,
Ferdinando Roux Camisani-Calzolari
Magne Waskaas
N.N Professorship in Process Technology
Francis III Doyle, Professor VI
University of California
5. Fields of Research
Advanced process control and monitoring methods, fault diagnosis, production control and their
applications in the field of mineral and metal processing, oil refining, pulp and paper making and
bioenergy production.
Major research projects (external funding) :
Advanced Control Technology for Waste Water Treatment Processes, January 1993 –
December 1994, Academy of Finland, 154 000 FIM.
Application of Artificial Intelligence methods for optimization of waste material recycling
processes, January 1994- December 1995, Academy of Finland, 222 000 FIM.
Reactive Distillation, April 1994-March 1995, TEKES, 700 000 FIM.
Sustainable Paper, January 1994-December 1994, KCL and KTM, 320 000 FIM.
Filtration, April 1996-March 1999, TEKES and Larox Oy, 1 750 000 FIM.
Automation state of the art and trends in the pulp and paper industry, 1998, ENSO, 60 000
FIM.
Automation and information system for a chemical research reactor, July 1997-March
1999, TEKES, 530 000 FIM.
Knowpap - multimedia environment for papermaking technology and paper mill automation,
September 1997-December 2000, TEKES, 1 000 000 FIM
Expert system for ore leaching based hybrid modeling, January 1997- December 1999,
Academy of Finland, 681 300 FIM.
High level control system for the HGM- separator, June 1997 – December 1997,
Outokumpu Chrome Oy, 84 600 FIM.
The ALFA PILOT2-B1-The cooperation project from Latin America to Northern Europe,
1997-1999, EU, 171 000 ECU.
The ALFA PILOT2-B2co-project, 1997-1998, EU, 31 750 ECU.
Fault diagnosis system for the Outokumpu flash smelting process, January 1999- February
2002, TEKES and Outokumpu Contractors Oy, 302 000Euroa.
Identification of process disturbances in electrolytic refining of copper, May 1999 –
December 1999, Outokumpu Mintec Oy, 174 800 FIM.
Expert system for crystallization and filtration processes, August 1999 – December 2002,
Academy of Finland, 109 000 Euroa.
Integrated fault diagnosis system for process equipment and unit processes, January
2000- February 2003, TEKES , Larox and Neste Engineering, 317 000 Euroa.
6
Embedded Fault Diagnosis in the Intelligent Flotation Cell, January 2000 –December 2002 ,
TEKES, Mondo Minerals, Neles Automation and Outokumpu Mintec , 224 000 Euroa.
Intelligent Processes and Process Equipment in the Mineral Industries, Automin, June
2003-May 2005, Outokumpu Mintec, Metso Automation, Metso Minerals, Larox Oyj, Avesta
Polarit Chrome Oy, Kemira Phosphates Oy, 213 985 Euroa.
Concept Development for the Operator Support System in the Network of the Complex
Industrial Processes, March 2003- December 2004, TEKES, UPM_Kymmene Oyj, Larox
Oyj, Neste Engineering, 200 000 Euroa.
Networked Control Systems Tolerant to faults, IST/EU, August 2004-2007, University of
Henri Poincare , University Duisburg-Essen, HUT, University of Hull, Neste Engineering,
Predict, SAE-Automation, 200 000€.
Process monitoring and networked control systems tolerant to faults, 01.01.2005 31.12.2007 , Academy of Finland, 128.400 €
Embedded control and monitoring systems in production machine networks, 01.03.2005 –
1.3.2009, Academy of Finland. 340 000 €
Production 2010, TEKES, Metso, Myllykoski Oy, IBM, Stora Enso, Oulu University, VTT
Automation (coordinator), 1.1.2005-1.6.2008, 277 000 €.
Energy Boilers and the added value service modules, TEKES, Fortum Oyj, Wärtsilä Oyj,
Foster Wheeler Oyj, VTT, Kuopio University, Jyväskylä university, 1.6.2008-1.6.2011.
257 000€.
Plug and Play monitoring and control architecture for optimization of large scale production
processes. PAPYRUS, 2010, IST/EU, ABB (Coordinator), University of Henri Poincare,
University of Duisburg-Essen, Predict, 1.9.2010-28.3.2013, 390 000€.
Optimization of large scale production processes, PAPOP, 2010, Academy of Finland,
1.1.2011-31.12.2014, 653 067 €.
Integrated Condition Based Control and maintenance, ICBCOM, 2011, Tekes, MetsoPower
Oy, Outokumpu Oyj, Kemijoki Oy, Efora, Oulu University (coordinator), 1.6.2011-31.5.2014,
300 000€.
Sustainable Technologies for Calcined Industrial Minerals in Europe, STOICISM,2012,
FP7-NMP-2012-LARGE-6, 1.1.2013-31.12.2016, 6 000 000€.
Research Consortium leader:
Filtration, ( TKK; Lappeenranta Technical University, Larox Oyj, TEKES)1996-1999, 2 400 000 FIM;
Automation and Information system for a chemical reactor,( TKK, Industrial Chemistry, Process
Control, TEKES, Neste Oil Oyj, 1997-1999, 975 000 FIM; EU-Alfa-Pilot B2-project ( TKK, University
of Santiago, Chile; Santa Maria University, Chile; Instituto Superior Technico, Portugal; Codelco,
Chile; Outokumpu; EU) ; Modelling of leaching of complex, low grade sulphidic copper ore ( TKK,
Laboratory of Metallurgy, Process Control), 1997-1999, 2 100 000 FIM; Embedded fault diagnosis
in process equipment and processes and their remote support, (TKK, Oulu University, Rautaruukki
Oyj, Outokumpu Oyj,TEKES) 1999-2001, 3 450 000 FIM; Integrated fault diagnosis and monitoring,
( TKK, Oulu University, ABB, Neles, Neste Oil Oyj, Larox oyj, TEKES), 2000-2002, 694 000 €;
Concept development of operator support system in the network of the complex industrial
processes, ( TKK, Neste Engineering, UPM Kymmene Oyj, Larox Oyj, TEKES),2003-2004,
300 000€. Embedded control and monitoring systems in production machine networks,( TKK, Oulu
University, Tampere University, Academy of Finland), 2005-2009.
Leader for State of the art; Contemplative stance on process automation:
A contemplative stance on process automation in the minerals and metals industry.10 working
groups; 33 members from 26 countries
Emerging areas in automation: 39 Technical Committees; 1700 members from 50 countries
7
6. Publications and Present Research Group:
About 190 refereed publications in international scientific journals and proceedings (Appendix),
over 100 other scientific articles, monographs, abstracts, invited speeches and other publications.
A research group of 15-20 active researchers.
7. Teaching
Responsible for Process Control Study Programme in Aalto since 1994 and currently directing also
the International Process Systems Engineering MSc Programme in School of Chemical
Technology.
MSc level courses: Optimisation; Process Industry Measurements; Basic Course in Process
Automation; Process Modelling and Simulation; Process Control Structures and Applications;
Intelligent Process Control Methods; Production Planning and Control in Process Industry; Process
Automation Project Work; Control and Information Systems in Pulp and paper Industries; process
Monitoring; Process Control in Mineral processing.
Supervisor of PhD and Lic Thesis: 16
Supervisor of MSc Thesis: about 150
8. Scientific and Educational Activities in Aalto University:
TKK Foundation, 2011-, Vice Board member
TKK Foundation ,2012-, Working committee member
Department of Biotechnology and Chemical Technology, 2010-, Board member
Department of Chemistry, 1994-2010, Council member
PSE-Process Systems Engineering Programme, Chair
EMEC-Erasmus Mundus Programme, 2007-2009, Board member,
HUT language Center, 1996-1998, Board member
Institute of Energy Technology, 1994-2009, Board member
PAPSAT-PhD Programme, Board member, member
GSCHE-PhD Programme, member
Linkage Programme “Modern Technology in Pulp and paper Industry, 1994-2002, Board member
9. Other Academic and Professional Merits and Activities:
Business Strategy Game Winner, 1994, Glasgow Business School, UK.
Control Engineering Practice Prize paper Award, 2002, IFAC World Congress.