1 DAY Wednesday, 22 October, 2014

1st DAY
Wednesday, 22 October, 2014
08:30-09:30
09:30-10:00
10:00-10:45
Registration Procedures
Opening Ceremony* (Hall A&B)
Keynote Speech-1: Dr. Carsten Becker-Willinger, Leibniz Institute for New Materials, Germany
Current nanomere science relevant to coatings (Hall A&B)
Keynote Speech-2: Dr. Cynthia Arnold, The Valspar Corp., USA
Profitability and growth: Business practices and innovation trends of the coatings industry (Hall A&B)
Coffee Break
Session 1: Architectural and Wood Coatings (Hall A)
Session 2: Industrial, Protective and Marine Coatings
(Hall C)
Dr. Marie Bleuzen, The Dow Chemical Company,
Karl Rossmann, et al., Allnex Austria & USA
France
Is your waterborne 2K epoxy formulation giving you a
New binder technology for sustainable long lasting
headache? Here is the cure
colorful exterior walls
Dr. Eva Tejada, et al., Bayer Material Science, Germany
Eric Brouwer, Croda, Netherlands
Different cross-linking strategies: self-crosslinking acrylic for
Novel epoxy toughening agent for VOC free epoxy
1K and 2K waterborne wood coatings
based coatings
Lunch Break
Steven De Backer, DuPont Titanium Technologies, Belgium
Tolga Dıraz, Melih İyigüllü, SSPC Turkey
The working mechanisms and value of specialized TiO 2
International standards and certifications in the
grades for flat paints
industrial protective coating sector, a close-up look
Dr. Christian H. Weidl, BASF SE, Germany
Dr. Joerg-Alfred Vogelsang, Sika AG, Switzerland
New generation of nonionic non-gelling surfactants for
New trends and current developments in anticorrosive
emulsion polymerization
coatings
Prof. Dr. Andreas Gerdes, KIT, Germany
Francoise Heine, Momentive Specialty Chemicals,
st
Construction chemistry in the 21 century–challenges and
Belgium
chances
Ultra low VOC, high performance waterborne epoxy
coatings
Coffee Break
Ş. Deniz, et al. Marmara University, Turkey
Prof. Dr. Stuart Croll, et al., North Dakota State
Creating low energy paint surface using hallow
University, USA
nano-latex particles
Pull-Off Adhesion Test: Variability and Other Problems
10:45-11:30
11:30-12:00
12:00-12:30
12:30-13:00
13:00-14:00
14:00-14:30
14:30-15:00
15:00-15:30
15:30-16:00
16:00-16:30
16:30-17:00
Sinem Güreş et al., Yıldız Technical University, Turkey
Investigation of parameters affecting thermal insulation for
decorative insulated interior paint
17:00-17:30
Udo Schonhoff, Elementis GmbH, Germany
Novel high efficient NISAT thickeners
17:30-18:00
Jürgen Kirchner, Evonik Industries AG, Germany
The unsolvable solution-wetting and dispersing additives
with low extraction from exterior coatings
18:00-20:00
Björn Borup, Helmut Mack and Philipp Albert, Evonik
Industries, Germany
New silane-based binder for 2-pack water-borne
zinc dust paints
Karl Rossmann, Allnex, Belgium
Novel waterborne hybrid resin technology for the
protection of exterior wood
Ralf Eberhards, Lubrizol Deutschland GmbH, Germany
Next generation high efficient matting agents for UV
coatings
POSTER SESSION & COCKTAIL
Presentations by the invited speakers are written in bold.
*Speakers of Opening Ceremony:
Dr. Engin Çörüşlü, Chairman, paintistanbul 2014 Scientific Committee
Dr. Sonja Schulte, Vincentz Network
Onur Gökulu, TMMOB Chamber of Chemical Engineers, Istanbul Branch
2nd DAY
10:00-10:30
10:30-11:00
Thursday, 23 October, 2014
Session 3: Novel Materials (Hall C)
Prof. Dr. İskender Yılgör, Koç University, Turkey
Influence of the average surface roughness on the
formation of superhydrophobic polymeric surfaces and
coatings
C. Evans, I. Martin, C. Smart, Incorez Preston, England
A future without pyrrolidones in water based PUD'skeeping VOC's low without compromising on performance
Session 4: Manufacturing Technologies, Analytical and
Test Methods (Coral Hall)
Per Jutterstrom, NCS Colour AB, Sweden
Colour management and quality control process in the
coatings industry
Prof. Dr. Emin Arca, Marmara University, Turkey
The effect of wetting and surface energy on the friction
of coated surfaces
11:00-11:30
Dr. Christian H. Weidl, BASF SE, Germany
New plasticizing co-monomer for use in emulsion
polymerisation
Dr. Mark Nichols, The Ford Motor Company, USA
Quantitative assessment of anti-fingerprint coatings for
automotive touchscreens
11:30-12:00
12:00-12:30
Coffee Break
Dr. Guillermo Perez-Lorenzo, Organik Kimya, Turkey
Norbert Kern, Bühler, Switzerland
Advanced polymers for advanced coatings
Designing milling systems to reduce total cost of
ownership
12:30-13:00
Prof. Dr. Nergis Arsu, Yıldız Technical University, Turkey
Novel radical photoinitiators for UV-curing applications
Dr. Lars Müller, Heubach GmbH, Germany
The challenge to find the optimized tinting system
13:00-14:00
14:00-15:00
Lunch Break
Exhibition & Congress Joint Event (Hall A&B)
Ahmet Faik Bitlis, Chairman, Bosad
Jan van der Meulen, CEPE
Plaquet Presentation
15:00-16:00
Exhibition & Congress Joint Event Special Guest: Peter Fisk (Hall A&B)
16:00-16:30
16:30-17:00
Session 5: Innovative Materials, Sustainable
Technologies and Regulatory Issues (Hall A)
Clifford Schoff, Schoff Associates, USA
An introduction to sustainability
Coffee Break
Session 6: Functional Coatings & Materials (Hall C)
17:00-17:30
Paul Wood, Dow Microbial Control, Switzerland
2015 - a time of change will you be ready?
17:30-18:00
Soner Kılıç, Kansai Altan, Turkey
Forty years of NAD microgels as rheology control agents
18:00-18:30
Mustafa Bağan, TKSD, Turkey
Classification of paints according to new classification bylaw (CLP)
18:30-18:45
Presentations by the invited speakers are written in bold.
Prof. Dr. Yusuf Z. Menceloğlu, et al., Sabancı
University, Turkey
Dual scale roughness driven perfectly hydrophobic
surfaces prepared by electrospraying a polymer in good
solvent-poor solvent systems
Jasmina Dustebek, et al., Dokuz Eylül University, Turkey
Effects of carbon nanotubes on the mechanical strength
of self-polishing antifouling paints
Serkan Ünal, et al., Sabancı University, Turkey
Development of novel waterborne polyurethane
dispersions containing nanoparticles for functional
coating applications
Engin Açıkalın, et al., Tübitak, Turkey
Nanosized hybrid electromagnetic wave absorbing
coatings
CLOSING
PAINT SCHOOLS
1st Day
10:00-11:30
11:30-12:00
12:00-13:30
2nd Day
10:00-11:30
11:30-12:00
12:00-13:30
Friday, 24 October, 2014
Paint School-1: Coating failures and prevention, Dr. Clifford K. Schoff
(Coral Hall)
Coffee Break
Paint School-2: Assessment of long-term weatherability of organic
coatings, Dr. Mark Nichols (Coral Hall)
Saturday, 25 October, 2014
Paint School-3: Corrosion protection with organic coatings, Dr. Lars
Kirmaier (Coral Hall)
Coffee Break
Paint School-4: Basics of architectural coatings, Dr. Christian Schaller
(Coral Hall)