Product Datasheet Software Release – Audi 8V S3 2.0TSi – Saloon

Product Datasheet
Software Release – Audi 8V S3 2.0TSi – Saloon
FAST FACTS
•
•
•
Gains of up to +69BHP and +74FT/LB from Stage 1 for better drivability.
Enhanced drivability, smoothness, responsiveness, power delivery and performance
Price $1209 inc. GST.
Hot on the heels of the recent stage 1 performance software release for the MK 7 Golf R, Revo are proud
to announce stage 1 performance software for the Audi 8V S3 Saloon. Since these 2 cars both have the
Gen 3 EA888 VAG engine, Stage 1 transform the S3 and puts it into supercar rival territory just like it did
for the MK 7 Golf R.
Stage 1
Stage 1 comes as a result of months of development, rigorous testing plus real world performance
evaluation on development vehicles. Revo performance software can be flashed directly through the
OBD2 diagnostic port with no need for ECU removal.
Stage 1 is designed to work in harmony with an otherwise totally standard car to give gains of up to
75BHP* and 80FT/LB* using pump fuel, over the standard 296BHP and 280FT/LB with fantastic gains
throughout the rev range giving better drivability and increased performance whether you're on the road
or the race track.
*- Performance gains are dependent on fuel quality and environmental conditions. Figures quoted are real &
achievable given good quality fuel and conditions.
Product Datasheet
Stage 1 AUDI, S3 Saloon, 2.0 TSI
Power (bhp)
Torque (lbft)
Power (kW)
Torque (Nm)
296 bhp
280 lbft
220 kW
349Nm
346 - 371 bhp
330 - 360 lbft
258 – 276 kW
447 – 488 Nm
Stock
REVO Stage 1 Software
NOTE: Power is dependent on Fuel Quality, Performance Settings and Conditions
TUNING METHOD – FLASH
Vehicle can be flashed via the OBDII Port
Flash time – approx. 15-20minutes
OBD location – below bonnet release lever in drivers side foot-well
NOTE: All control modules need to be fault free in order to flash the ECU
HOW TO SETUP REVO PERFORMANCE SOFTWARE ON THIS VEHICLE
Your Revo software is switchable between ‘Stock’ & 3 Performance Modes with the SPS Switching Device.
Mode Selection
Stock Mode
Description
Sets the vehicle to a stock like performance mode*
Performance Mode #1
Sets your vehicle to Revo Performance mode A (Tuned for lower octane pump
fuel/poor operating conditions e.g:95ron)
Performance Mode #2
Sets your vehicle to Revo Performance mode B (Tuned for high octane pump
fuel/good operating conditions e.g:98ron)
Performance Mode #3
Sets your vehicle to Revo Performance mode C (Tuned for high octane
fuel/ideal operating conditions e.g:100ron)
NOTE: Stock mode is not completely stock, it will run similar performance levels to a stock vehicle (Limits
remain modified).
All Revo dealers have complete factory stock files and the different software revisions in the event you
require the car to be returned to stock factory software.
*- Performance gains are dependent on fuel quality and environmental conditions. Figures quoted are real &
achievable given good quality fuel and conditions.