TRIMBLE 5700 L1 GPS SYSTEM The upgradable L1 GPS system The Trimble® 5700 L1 GPS receiver is an easyto-use GPS receiver especially developed for static, L1 FastStatic, and kinematic surveying. It offers proven Trimble GPS technology in a flexible and cost-effective solution. Team the rugged Trimble 5700 L1 with the Trimble Recon™ controller 1 for a GPS system with the toughest specs in the industry. The Trimble 5700 L1 will increase your efficiency and productivity on any job and in any environment. One solution for GPS field work and postprocessing The Trimble 5700 L1 GPS system provides a single solution for GPS field work, data processing, and data transfer to a design system. Collect short and medium baselines on L1 GPS surveys, then perform sophisticated postprocessing and network adjustment in the powerful Trimble Geomatics Office™ software. You can transfer the postprocessed data into a design package such as Trimble Terramodel® software. Establish control points, measure existing boundaries and monuments Establishing control points with GPS is radically faster than with conventional instruments: • Set up easily: Mount the Trimble 5700 L1 and Trimble A3 antenna on a tripod and begin control surveying with just one button press. The receiver’s simple interface takes almost no time to learn. • Work fast: Following its quick and easy setup, the 5700 L1 ensures consistent tracking of GPS satellites, thereby minimizing observation time and maximizing the quality of your data. Its advanced Trimble Maxwell™ technology provides proven GPS capability you can rely on. • Get better results … fast: Back in the office, download the field data into the Trimble Geomatics Office software to quickly process 1 Key Features baselines. You can generate subcentimeter positions in a least squares network adjustment, even from mixed GPS and terrestrial observations. Perform topographic surveys To perform productive topographic surveys in any environment, mount the 5700 L1 on a pole with the Trimble Recon controller running your choice of Trimble field software. Use the controller to enter point information and adjust receiver settings. The Trimble 5700 L1 supports postprocessed kinematic survey methods for both stop-and-go and continuous operations. • Map on the run: With the 5700 L1 latency of only 0.02 sec, you can make measurements without stopping. Mount the receiver on an ATV and survey a surface as fast as you can drive. • Eliminate errors: Trimble field software graphically displays in real time a map of all the points you’ve gathered, so you can check for gaps in the survey before you leave the site, reducing the need for costly revisits. Optimize your GPS survey with satellite information at your fingertips: Choose a Trimble On the ultra-rugged Trimble Recon run the Trimble field software that will best support your geographical region. • Increase your productivity with Trimble GPS technology at an affordable price • Perform sophisticated postprocessing in the Trimble Geomatics Office software • Survey in even the toughest environments • Upgrade to dual frequency or RTK capability as your business needs change field software option to use with your Trimble 5700 L1 and receive optimal support for your GPS survey. Trimble field software graphically displays satellites and provides tracking and satellite status, as well as observation timers. Proven GPS Technology from Trimble MODULAR DESIGN TRIMBLE GEOMATICS OFFICE SOFTWARE—POWERFUL POSTPROCESSING Clip the receiver to your belt, tuck it into a comfortable backpack, attach it to a tripod, or configure it with all components on a compact lightweight range pole. Mount the antenna where you need it while keeping the receiver in a convenient location. After completing your field work, transfer your 5700 L1 data to the Trimble Geomatics Office software, Trimble’s advanced GPS and conventional survey data processing and link package. When 5700 L1 is used with Trimble Geomatics Office, you can perform control surveys with short occupation times to generate subcentimeter results. In addition, Trimble Geomatics Office is designed to streamline GPS postprocessing tasks, reducing the time needed to process the GPS data collected in the field. A variety of quality assurance and quality control (QA/QC) tools make identifying unexpected results very simple, as are the tools to correct field errors. The network adjustment feature enables you to perform more advanced surveys and conducted detailed analysis and adjustment of your results. SUPER-FAST DATA TRANSFER Transfer data to a PC at speeds of more than 1 Mb/s—ten times faster than the fastest serial port. FULL METAL JACKET Trimble 5700 GPS Systems boast the toughest mechanical and waterproofing specs in the business. Work with everyone: Even if your clients use a different design or CAD system, Trimble Geomatics Office software can accept data from, and output data to, over fifty data formats, including most popular survey, data collector, GIS, and CAD formats. EASY TO USE FULLY UPGRADABLE TO DUAL-FREQUENCY AND RTK OPERATION Begin using Trimble GPS at an affordable price and then upgrade to dual frequency and RTK as your needs grow. TRIMBLE GPS RECEIVER TECHNOLOGY Just set it up and turn it on. The 5700 automatically acquires satellites and starts to record data. Combine with a Trimble Recon data collector and field software to perform detailed control or topographic surveys. INTERNAL BATTERIES Full day operation on a single charge. Convenient, easy to replace. Integrated battery charger. No need for external charger. Simple to use. Proven Trimble L1 GPS technology ensures accurate and reliable data, and confidence in your results. Trimble Maxwell technology delivers superior satellite tracking, faster measuring, optimal precision, and lower power usage. WAAS AND EGNOS 64 MB OF COMPACTFLASH MEMORY LIGHTWEIGHT Use this internal removable memory to store more than 1,700 hours of continuous L1 data collection at an average of 15-second intervals. The magnesium alloy case is stronger than aluminum, but also 30% lighter—the 5700 L1 weighs just 1.4 kg (3 lb) with batteries. WAAS and EGNOS capability lets you perform real-time differential surveys to GIS grade without a base station. TRIMBLE A3 ANTENNA The Trimble A3 antenna is a high-quality GPS antenna that is especially designed for resistance to signal interference and multipath. Multipath, which can be caused by obstacles such as trees or buildings, can result in inaccurate measurements. The Trimble A3 maximizes the Trimble Maxwell technology in the 5700 L1 to provide the best possible performance. TRIMBLE 5700 L1 GPS SYSTEM Specifications Static and FastStatic GPS surveying2 Electrical: Power . . . . . . . . . . . . . . . . . . . DC input 11 to 28 V DC with over voltage protection Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 W receiver only Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Greater than 10 hours data logging Battery weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1 kg (3.5 oz) Battery charger . . . . . . . . . . . . . . . . . . . . . Internal with external AC power adapter; no requirement for external charger Power output . . . . . . . . . . . . . . . 11.5 to 20 V DC (Port 1), 11.5 to 27.5 V DC (Port 3) on external power input Certification. . . . . . . . . . . . . . . . Class B Part 15 FCC certification, CE Mark approved, C-Tick approved, Canadian FCC Environmental: Operating temperature4 . . . . . . . . . . . . . . . . . –40 °C to 65 °C (–40 °F to 149 °F) Storage temperature . . . . . . . . . . . . . . . . . . . –40 °C to 80 °C (–40 °F to 176 °F) Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100%, condensing Communications and data storage: • 2 external power ports, 2 internal battery ports, 3 RS232 serial ports • Integrated USB for data download speeds in excess of 1 Mb/s • External GPS antenna connector • CompactFlash advanced lightweight and compact removable data storage, 64 MB • More than 1,700 hours continuous L1 logging at 15 seconds with 6 satellites typical with 64 MB card • 1 Hz, 2 Hz, 5 Hz, and 10 Hz positioning and data logging Horizontal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5 mm + 0.5 ppm RMS Vertical . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5 mm + 1 ppm (× baseline length) RMS Trimble A3 antenna General • Front panel for on/off, one-button-push data logging, CompactFlash card formatting, ephemeris and application file deletion, and restoring default controls • LED indicators for satellite tracking, data logging, and power monitoring • Tripod clip Performance specifications Measurements • Advanced Trimble Maxwell technology • High-precision multiple correlator L1 pseudorange measurements • Unfiltered, unsmoothed pseudorange measurement data for low noise, low multipath error, low time domain correlation, and high dynamic response • Very low noise L1 measurements with <1 mm precision in a 1 Hz bandwidth • L1 Signal-to-Noise ratios reported in dB-Hz • Proven Trimble low-elevation tracking technology • 12 Channels L1 C/A Code, L1 Full Cycle Carrier, WAAS/EGNOS1 Code differential GPS positioning2 Horizontal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±(0.25 m + 1 ppm) RMS Vertical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±(0.5 m + 1 ppm) RMS WAAS differential positioning accuracy typically <5 m 3DRMS3 Kinematic surveying2 Real-time and postprocessed kinematic surveys Horizontal . . . . . . . . . . . . . . . . . . . . . . . .±(10 mm + 1 ppm) (× baseline length) RMS Vertical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±(20 mm + 1 ppm) RMS Hardware 5700 GPS receiver Physical: Casing . . . . . . . . . . . . . . . . . . . . . .Tough, lightweight, fully sealed magnesium alloy Waterproof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tested to IPX7 standards Shock and vibration. . . . . .Tested and meets the following environmental standards: Shock . . . . . . . . . . . MIL-STD-810F to survive a 1 m (3.28 ft) drop onto concrete Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MIL-STD-810-F on each axis Weight . . . . . . . . . . . .With internal batteries, internal battery charger: 1.4 kg (3 lb) Dimensions (W×H×L) . . . . . . .13.5 cm × 8.5 cm × 24 cm (5.3 in × 3.4 in × 9.5 in) Specifications subject to change without notice. Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1575.42 ±10 MHz Antenna Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 dB min (Amp plus Antenna) Polarization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . right hand circular Voltage . . . . . . . . . . .3.4 to 11.5 V DC (max 18 V DC – not for continuous operation) Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 mA max Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TNC Bulkhead Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.86 lb Temperature: Operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –50 °C to +85 °C Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –50 °C to +86 °C Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5/8–11 thread 1 Upgradable to 24 channels L1 C/A code, L1/L2 full cycle carrier, WAAS/EGNOS 2 Accuracy may be subject to conditions such as multipath, obstructions, satellite geometry, and atmospheric parameters. Always follow recommended survey practices. 3 Depends on WAAS/EGNOS system performance. 4 Receiver operates normally to –40 °C (–40 °F) but some office-based functions such as USB download or internal battery charging are not recommended at temperatures below freezing. NORTH AMERICA Trimble Geomatics and Engineering Division 5475 Kellenburger Road • Dayton, Ohio 45424-1099 • USA 800-538-7800 (Toll Free) • +1-937-245-5154 Phone • +1-937-233-9441 Fax E U RO P E Trimble GmbH Am Prime Parc 11 • 65479 Raunheim • GERMANY +49-6142-2100-0 Phone • +49-6142-2100-550 Fax A S I A - PAC I F I C Trimble Navigation Singapore Pty Limited 80 Marine Parade Road • #22-06, Parkway Parade • Singapore 449269 • SINGAPORE +65-6348-2212 Phone • +65-6348-2232 Fax YOUR LOCAL TRIMBLE OFFICE OR REPRESENTATIVE www.trimble.com © 2004, Trimble Navigation Limited. All rights reserved. Trimble, the Globe & Triangle logo, and Terramodel are trademarks of Trimble Navigation Limited registered in the United States Patent and Trademark Office and other countries. Digital Fieldbook, Maxwell, and Trimble Geomatics Office are trademarks of Trimble Navigation Limited. Recon is a trademark of Tripod Data Systems Inc., a wholly owned subsidiary of Trimble Navigation Limited.All other trademarks are the property of their respective owners. Reorder PN 022543-087 (10/04)
© Copyright 2024