ARCHITECTURAL AFD-45 45-MINUTE C LABEL POSITIVE PRESSURE, CATEGORY A Mineral Core Crossband #1 Face Veneer HBL-400.16.0 DESCRIPTION Haley's Architectural Mineral-Core, Positive Pressure, Category A Fire Doors are intended for use where a 45-Minute fire barrier is required. These doors are listed by Warnock Hersey International and bear a W.H.I. label. SPECIFICATIONS Maximum Size: 4'-0" x 8'-0" Single Swing (no intumescent) 8'-0" x 8'-0" Regular Pair (4-point latching: concealed intumescent at meeting stiles only) 4'-0" x 9'-0" Single Swing (concealed intumescents both stiles and top rail) 8'-0" x 9'-0" Regular Pair (concealed intumescents both stiles and top rail) 8'-0" x 8'-0" Double-Egress Pair (concealed intumescents both stiles and top rail) 4'-0" x 3'-4" max. transom with concealed intumescent 4 edges. Transom bar required. Note: Maximum size may be restricted by specified hardware. Thickness: 1-3/4" Stiles: 1" G.P. Firestop, minimum. Will vary by door size and hardware. Rails: Top Rail: 1-1/2" G.P. Firestop, minimum. Bottom Rail: 1" G.P. Firestop, minimum. Will vary by door size, and hardware. Core: Mineral Core Faces: All commercially available hardwood-veneer species, medium-density overlay, highpressure laminates, and hardboard. Lights: 1296 sq. in. maximum 1/4" labeled (PWG) glazing material installed in a listed frame not nearer than 6" to any edge of the door. Maximum 36" width (min. 3") and 54" length. U.L. listed viewers not larger than 1" in diameter (all dimensions to visible glass). Larger sizes possible when using special fire glazing material. Fusible Link 1140 sq. in. maximum area allowed in Louvers: lower 40" of door;maximum width 38";maximum height 30"; minimum 5" from edge of door or hardware preps;minimum 10" from door bottom. Not allowed in doors with fire-exit hardware or vision panels. Pre-fitting: May be pre-fit to net sizes as specified. Machining: Must be factory machined for hardware as specified or by an authorized distributor, licensed to machine fire-rated doors under label service. Metal Edges: Not allowed on stiles which contain an intumescent-edge sealing system. Warranty: Life of original installation. See "Haley Warranty" for specific details. Short Form Doors shall be "Haley Architectural AFD-45, Specification: Positive Pressure, Category A, 45-Minute C Label" manufactured as shown in the Haley catalog. SS-7