New generation of hotmelt adhesives w o l l o f D o n ’t be a r e ICAMElT RX High performances hotmelt adhesives for packaging ICAMElT RX New hotmelt adhesives technology characterized by high performances, similar to Metallocene Based Adhesives, with a lower operating cost. The innovative raw materials used guarantee the following benefits: HIGH THERMAL STABILITY Absence of oxidation and carbonization, reduction of maintenance costs, downtimes and production wastes. Resistance to Oxidation at 160°C after 1 – 3 – 7 – 14 days 0 1 3 7 14 ICAMELT RX METALLOCENE BASED ADHESIVE EVA BASED ADHESIVE The absence of oxidation can be analyzed by the hoses status, too. The hoses with ICAMELT RX are oxidation free. EVA BASED ADHESIVE METALLOCENE BASED ADHESIVE ICAMELT RX HIGH ADHESIVE POWER Tear percentage of Kraft paper gluins at 160° after 2” and 6” open time Even on difficult substrates to be glued with a low wettability degree (less than 38 dynes/cm). 100 % Tear on Kraft paper 90 NO VOLATILE SUBSTANCES 90 90 80 70 70 60 60 60 50 45 40 30 20 10 Don’t emanate fumes or 0 2” Open time 6” Open time unpleasant smells, they ICAMELT RX METALLOCENE EVA BASED HM are suitable for the production of packaging intended to contain foodstuff. They are in accordance with FDA 21 CFR 175.105 and 21 CFR 176.180. HIGH COHESION Heat Resistance - S.A.F.T. Method 180 Using ICAMELT RX it is possible to obtain gluings with a higher heat resistance keeping the “Ring & Ball” unchanged. 160 160 160 145 140 Minutes 120 100 80 60 40 HIGH VERSATILITY 20 0 SAFT allows excelICAMELT RX METALLOCENE EVA BASED HM lent results even when applied at lower temperatures than those usually recommended, as often happens after additions of granules in the melting equipments and in the case of low temperature in the working areas. ICAMELT RX Operating Cost Comparison % 100 is particularly advantageous due to its lower price, due to the reduction of maintenance costs and production losses. ICAMELT RX 90 80 70 % 60 50 40 30 20 10 0 COSTS REDUCTION ICAMELT RX METALLOCENE PURCHASING COST EVA BASED HM MAINTENANCE COST NOT ONLY SUPPLIER Via dell’Arbetraccio, 6 06022 Fossato di Vico (PG) - Italia Phone: + 39 075 914971 Fax: + 39 075 9190125 www.icat.it [email protected] Poligono Industrial Buvisa Calle Levante n. 9 Premia de Dalt - Barcelona Phone: + 34 93 752 00 00 Fax: + 34 93 752 25 62 www.thermocol.es [email protected]
© Copyright 2024