1. No category

230 lectures
3 days
7 symposia
www.airtec.aero
ROOM 3
ROOM 4
ROOM 5
Register now!
www.airtec.aero/congress
9th AIRTEC 2014
International Congress
28 – 30 OCT 2014, Frankfurt/Germany
Courtesy of AIRBUS S.A.S 2011 All Rights Reserved.
Supply on the
Wings
UAV
HELI
AEROSPACE
SENSORS
SPACE
AEROSPACE
TESTING
AEROSPACE
AVIONICS
Preliminary Program
as of September 26th, 2014
including
5th International
SPACE World 2014
NEW: Commercial Space
B2B Meetings
Exhibition
Congress
> 10,000 Meetings
> 500 Exhibitors
> 230 Lectures
> 800 Attendees
AIRTEC’s core are B2B Meetings. From 8 weeks prior to the
event, our web platform lets
you plan your meetings. Structured by key words for highly
efficient matchmaking, meetings take place at the booths
of the exhibition. The support
of our staff maximizes the number of targeted meetings taking
place.
Holding B2B Meetings at the
exhibition booths gives Sales
and Business Development
Managers the opportunity
to present their products and
services to procurement and
supply chain managers, technology experts, developers
and project engineers, in a
professional environment. You
benefit from qualitative and
high standard B2B Meetings.
In the tradition of the past
years, the 9th AIRTEC 2014
International Congress offers
technology decision makers
from around the world an ideal
forum to communicate around
the aerospace supply chain.
The Congress takes place in
the middle of the exhibition to
ensure an optimal exchange.
For 2014 we expect more than
800 attendees.
What is AIRTEC?
The 9th AIRTEC 2014 International Congress consists of the following 7 symposia with a total of over
230 lectures within 3 days. On the following pages, you will find detailled informations about each
syposium.
Supply on the
Wings
UAV
HELI
AEROSPACE
SENSORS
SPACE
AEROSPACE
TESTING
AEROSPACE
AVIONICS
Federal Ministry for Economic Affairs
and Energy, Germany
Brigitte Zypries, MdB, Parliamentary
State Secretary at the Federal Ministry for Economic Affairs and Energy
Opening on Oct. 28th, 2014
German Aerospace Center DLR
Prof. Johann-Dietrich Wörner,
Chairman of the Executive Board
Keynote on Oct. 29th, 2014
www.airtec.aero/congress
Frankfurt, Germany
October 28 – 30, 2014
Frankfurt, one of Europe’s most
vibrant and modern cities, is annually hosting AIRTEC. Frankfurt
is conveniently accessible from
all over the world. Exhibitors
and participants take advantage of the professional environment of one of the largest fair
venues in Europe.
German Aerospace Center DLR
Prof. Rolf Henke, Member of the
Executive Board
Keynote on Oct. 28th, 2014
German Aerospace Center DLR
Dr Gerd Gruppe, Member of the
Executive Board
Keynote on Oct. 28th, 2014
Oct. 28th MORNING
www.airtec.aero/congress
ROOM 1
ROOM 2
ROOM 3
ROOM 4
ROOM 5
ROOM 6
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:20 Welcome Address
09:20 Welcome Address
09:20 Welcome Address
Supply on the Wings
AEROSPACE SENSORS
Supply on the Wings
UAV World
SPACE World
General Aviation
UAV DACH Meeting (by invitation only)
Propulsion
Metallic Structures
Opening Ceremony
09:45 Opening Remarks
Diana Schnabel, CEO/President airtec
GmbH & Co. KG, Germany
10:00 Opening Remarks
Brigitte Zypries, MdB, Parliamentary
State Secretary at the Federal Ministry for
Economic Affairs and Energy, Germany
10:15 Keynote
Prof. Rolf Henke, Member of the Executive Board, Responsible for Aeronautics,
German Aerospace Center DLR,
Germany
10:45 Keynote
„From Air Travel to Space Travel - Speed
Pays“
Allan Lockheed jr., son of Allan Haines
Lockheed, co-founder of Lockheed Martin
Corporation, USA
09:30 High Efficiency Machining of Aluminium Aircraft Structural Components
Simon Simmons, SGS Carbide Tool, GB
09:30 Keynote
Prof. Robert Schmitt, WZL and Fraunhofer
IPT, RWTH Aachen University, DE
09:40 Green Energy Approach in
Aviation
Shlomo Tsach, APG - Advanced Programs Group, IL
09:30 Recent Advances in Liquid Rocket
Propulsion
Prof. Stefan Schlechtriem, German Aerospace Center DLR, DE
09:50 A New Technology for Producing
AZ31 Magnesium Alloy Aircraft Brackets
with a Triangular Outline
Anna Dziubińska, Lublin Univeristy of
Technology, PL
10:00 [Title to be announced]
TBA, Fraunhofer IOF, DE
10:00 Utility Aircrafts
Shlomo Tsach, APG - Advanced Programs Group, IL
10:00 Green Propellant
Hartwig Ellerbrock, Airbus Defence &
Space, DE
10:10 Friction stir welding of light alloys
Dr Tadeusz Balawender, Rzeszow University of Technology, PL
10:30 Analysis of possibilities of combining thin-walled aircraft structures made
of aluminum alloys with the Friction Stir
Welding
Tomasz Gałaczyński, Rzeszow University
10:50 Plasma Electrolytic Oxidation (PEO)
Prof. Suman Shrestha, Keronite Group Ltd
- VP of Applications Engineering, GB
11:15 Coffe Break
11:15 Coffe Break
11:30 Keynote
Dr Hans Koenigsmann, Vice President of
Mission Assurance, SpaceX, USA
Aerodynamics
11:30 Identification of the motion platform‘s dynamic model
Milan Prustomersky, Brno University of
Technology, CZ
12:00 OFFICIAL OPENING of the SPACE
Segment
Dr Gerd Gruppe, Member of the Executive Board at German Aerospace Centre
DLR, DE
12:30 Keynote
by Generalmajor Dr Ansgar Rieks, Head
of Luftfahrtamt der Bundeswehr, DE
13:00 Lunch Break
09:20 Welcome Address
11:50 Fluid structure interaction analysis
for high-lift devices at large angle of
attack
R. Roszak, Poznan University of Technology, PL
10:30 Neutron Detection with new image
intensifier technologies
Prof. Rolf-Jürgen Ahlers, ProxiVision
GmbH, DE
10:30 The missing link - solutions for
drilling
Nadia Alberti, Alberti Umberto Srl, IT
Air Traffic Management ATM
10:50 Manufacturing / Metallic Structures: Production Cost Reduction, Machining
of Aerospace Al and Ti parts
Nehmé Joseph Andary, MAKINO
Europe, DE
11:00 Coffe Break
11:15 Coffe Break
11:15 Coffe Break
AEROSPACE SENSORS
Air Traffic Management ATM
UAV DACH Meeting (by invitation only)
11:30 Merging Additive Manufacturing
and Integrated Vehicle Health Management
Dr Sureshkumar Perinpanayagam,
Integrated Vehicle Health Management
Centre, Cranfield University, GB
11:30 Flight envelope protection within
adaptive controller design
Karol Rydlo, Brno University of Technology, CZ
12:10 Practical approach to make a
comprehensive safety analysis according
to ISO 26262
Dr Stefan Hoch, ICS AG, DE
13:00 Lunch Break
Manufacturing / Production
10:40 Future Aerospace Directions
Shlomo Tsach, APG - Advanced Programs Group, IL
Improved Simulation
12:30 Improved stress analysis for aerospace spiral bevel gears
Dr Adam Marciniec, Rzeszow University
of Technology, PL
10:20 Generic procedure for the verification of a "Freedom from Interferance"
/ impairment freedom according to ISO
26262
Dr Stefan Hoch, ICS AG, DE
12:30 Use of 3-Component Force Piezoelectric Sensors in Force Limited Vibration
(FLV) Testing Applications
Dr Carmine Salzano, PCB Piezotronics
Inc., US
13:00 Lunch Break
11:10 Modification of Tool Geometry
for Unconventional Slanting Drilling of
Composites
Piotr Tyczynski, Rzeszow University of
Technology, PL
11:30 The impact of technology of edge
forming tools with diamond composite
inserts on roughness of surface of Al
7075 aerospace parts in HSM
Robert Ostrowski, Rzeszow University of
11:50 Adaptive nonlinear control for light
aircraft flight control system
Jan Vlk, Brno University of Technology,
CZ
11:50 Identification of dynamic cutting
force coefficients by direct measurement
of cutting forces during vibratory cutting
Krzysztof Jemielniak, Warsaw University
of Technology, PL
12:10 Flight parameter identification for
the adaptive control of a light aircraft
Petr Dittrich, Brno University of Technology, CZ
12:10 Utilization of adaptive machining
in impeller and blade repairs
Mariusz Mucha, Rzeszow University of
Technology, PL
12:30 Optimization of Unconventional
Take-off of an Aircraft Aided by the
Ground System
Andrzej Majka, Rzeszow University of
Technology, PL
12:30 Increased Productivity through Advanced Cleaning & Surface Preparation
in the Aerospace Industry
Tony Lehnig, Cold Jet - Vice President of
Technology, BE
12:50 Optimal Flight Paths in Emergency
Situations, Andrzej Majka, Rzeszow
12:50 Internal Stress simulation for Panel
3D machining, Andy Miller, AEROLIA
13:00 Lunch Break
13:00 Lunch Break
13:00 Lunch Break
Oct. 28th AFTERNOON
www.airtec.aero/congress
ROOM 1
ROOM 2
ROOM 3
ROOM 4
ROOM 5
ROOM 6
13:00 Lunch Break
13:00 Lunch Break
13:00 Lunch Break
13:00 Lunch Break
13:00 Lunch Break
13:00 Lunch Break
Additive Manufacturing in Aerospace
Enabling Technologies
AEROSPACE SENSORS
Platforms
UAV DACH Meeting (by invitation only)
Propulsion
14:00 State of Industry
Tim Caffrey, Wohlers Associates, Inc. Senior Consultant, US
14:00 Advanced Composites Technology
Development at NASA Langley Research
Center
Dr John W. Connell, NASA Langley
Research Center, US
14:00 Draw Tower Gratings: from point
sensing to fully distributed measurements
Johan Vlekken, FBGS International, GB
14:00 Civil UAS Applications
Shlomo Tsach, APG - Advanced Programs Group, IL
14:00 Smart Rockets
Dr Olaf Przybilski, TU Dresden, DE
14:30 Overview of the NASA 5.5 M
Composite Cryotank Technology Development Program
Dr Douglas A. McCarville, Boeing
Research and Technology, US
14:30 Impacts of particles on aircraft
components: Which parameter do we
need and how can we measure it?
A. Vogel, NILU – Norwegian Institute for
Air Research, NO
14:30 Predator Aircraft Series Status
Report: Military & Civilian Missions
Rear Admiral U.S. Navy (Ret.) Christopher C. Ames, General Atomics
Aeronautical Systems, Inc. - Director,
International Strategic Development, US
Space Situation Awareness / Space
Debris / Space Weather
15:00 Cryo-Tanks
Dr Martin Sippel, Institute of Space Systems, German Aerospace Center DLR, DE
15:00 Signal and Power Transmission
by means of Ultra-long Flexible Printed
Circuits used in Rotary Joints and Twist
Capsules
Dr Christoph Lehnberger, ANDUS ELECTRONIC GmbH, DE
15:00 Protection of Space Assets using
Laser Technology
Wolfgang Riede, German Aerospace
Center DLR, Institute of Technical Physics,
DE
15:30 Racetrack to Orbit. An Additive
Revolution.
Francesca Cuoghi, CRP Group - Communication Manager, IT
15:30 A system model for laminar wing
ice protection
Markus Pfeil, TWT GmbH Science &
Innovation, DE
15:30 Space Weather Services in Europe:
Status and Prospects for the Future
Juha-Pekka Luntama, European Space
Agency, DE
16:00 4th edition of the “U.S. German
Aerospace Roundtable” UGART
(by invitation only)
16:00 Coffe Break
16:00 Coffe Break
16:00 Coffe Break
16:00 Coffe Break
UAV DACH Meeting (by invitation only)
Enabling Technologies
14:20 KEYNOTE: On the way to Additive
Layer Manufacturing: Chances & Challenges for the future industrial production
Peter Sander, Airbus Operations GmbH,
Manager Emerging Technologies &
Concepts, DE
14:55 Lecture
Dr Slade H. Gardner, Lockheed Martin
Space Systems Company, US
15:20 Lecture
Dr Raymond G. »Corky« Clinton, NASA
Marshall Space Flight Center - Deputy
manager of the Science & Technology
Office, US
14:30 Space Weather Needs of an
Evolving Customer Base
Brent Gordon, NOAA Space Weather
Prediction Center, US
15:45 Technology Symbiosis Biomimicry
and Additive Manufacturing
Michael Arold, Altair Engineering
GmbH, DE
16:10 3D Printing Solutions for the
Aerospace industry
Jurgen Laudus, Materialise, BE
AEROSPACE TESTING
Platforms
16:35 Lecture
Ralph L. Resnick, National Center for
Defense Manufacturing & Machining
(NCDMM), President and Executive
Director and Founding Director, America
Makes, the National Additive Manufacturing Innovation Institute (NAMII), US
16:30 Test Approach for small and
medium avionics equipment development
projects
Torsten Frerichs, socon Software Consulting GmbH, DE
16:30 Overcoming Main Problems of Fixed Wing UAS by Innovative Design - the
VTOL FiWiCo II (Fixed Wing Copter)
Dr Hans-Peter Thamm, Geo-Technic, DE
16:30 An Ionosphere Monitoring and
Prediction Center to diminish space
weather effects on GNSS services and
safety applications
Dr Jens Berdermann, German Aerospace
Center DLR Institute of Communications
and Navigation, DE
17:00 Q&A panel discussion
Tim Caffrey, Wohlers Associates, Inc. Senior Consultant, US
17:00 Use of Qualified Tools to Verify
Outputs of Unqualified Tools
Tom Erkkinen, MathWorks, DE
17:00 ParCS-S2 : Park Cleaning Swarm
Supervision System – a position paper
Serge Chaumette, LaBRI, University of
Bordeaux, FR
17:00 Space Debris Remediation and
On-Orbit Servicing
Dr Peter Hofmann, OHB System AG,
formerly Kayser-Threde, DE
Global Supply Chain Summit
17:15 Presentation
Mark Scuderi, The Boeing Company - Sr.
Oct. 28th EVENING
www.airtec.aero/congress
ROOM 1
ROOM 2
ROOM 3
ROOM 4
ROOM 5
ROOM 6
Global Supply Chain Summit
4th edition of the “U.S. German Aerospace Roundtable” UGART
(by invitation only)
AEROSPACE TESTING
Platforms
UAV DACH Meeting (by invitation only)
Enabling Technologies
17:30 Recuperation with a battery/fuel
cell hybrid in the Antares DLR-H2
Steffen Flade, German Aerospace Center
DLR, DE
17:30 IAT21‘s D-Dalus VTOL - efficiency
increase in forward flight
Meinhard Schwaiger, IAT21 Innovative
Aeronautics Technologies GmbH, AT
18:00 A cost effective way of conducting
EMI-measurements
Sven Böhmer, Statex Produktions &
Vertriebs GmbH, DE
Modelling/Simulation
18:30 Exterior Noise Testing of Propeller
Aircraft
Francesco Marulo, University of Naples Federico II, IT
18:30 Object-Oriented Aircraft Modelling
with the DLR FlightDynamics Library
Andreas Klöckner, Deutsches Zentrum für
Luft- und Raumfahrt DLR, DE
17:30 Presentation
Stephen Cowan, Bombardier Aerospace,
17:45 Presentation
Ishii Hiroyuki, Kawasaki Heavy Industries
- Assistant Manager of Procurement Planning Section 2, Material Department, JP
18:00 Presentation
Gerald Pfeiler, ViscoTec America - President/CEO, US
18:15 Presentation
Jennifer Potts, Bell Helicopter Textron
Inc, US
18:30 Presentation
Brad Alexander, Parker Aerospace /
Parker Hannifin Corporation - Manager
of Supply Chain Integration and Internati18:45 Presentation
Dr Christof May, Airbus Group - Head
of Airbus Group/Airbus Procurement
Governance, DE
19:00 RECEPTION
18:00 Using capability models for UAV
sensor deployment
Prof. Peter Stütz, Unversität der Bundeswehr München, DE
17:30 Future Navigation Opportunities
with the Galileo Satellite System
Prof. Bernd Eissfeller, Universität der
Bundeswehr Munich, DE
Oct. 29th MORNING
www.airtec.aero/congress
ROOM 1
ROOM 2
ROOM 3
ROOM 4
ROOM 5
ROOM 6
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:20 Welcome Address
R&D SUMMIT: FUTURE AIRCRAFT DESIGN
Combat Aircraft
HELICOPTER Technologies
UAV World
AEROSPACE SENSORS
SPACE World
09:30 Future Aviation Challenges
Axel Flaig, Airbus - Senior Vice President
09:30 Designing for Supersonic Cruise
Flight: »supercruise« from the Aerodynamic Designer‘s Viewpoint
Dr Igor Bashkirov, TsAGI, RU
09:30 Engine Protection Systems to
Improve Helicopter Availability: Theory,
Design, Operation & Maintenance
Christopher Savage, Pall Aerospace, GB
Certification, Air Space Integration &
Public Acceptance
09:30 Flight Parameters Measurement
System for PW6 in flight boundary layer
mapping
Grzegorz Kopecki, Rzeszow University of
Technology, PL
KEYNOTES
10:00 i-VISION – the Future of Human-centric Cockpit Design
Ralph Habig, OPTIS GmbH, DE
10:00 UAS integration in civil airspace
under self-organizing airborne network
Edward Falkov, State Research Institute of
Aviation Systems (GosNIIAS), RU
10:00 Airborne Survey & Surveillance
Pods
George J. DeCock, Airborne Technologies GmbH, AT
10:00 KEYNOTE
Robert T. Bigelow, Bigelow Aerospace,
US
10:30 Comparative analysis of numerical
and experimental methods of determining the contact pattern of aircraft bevel
gears
Dr Piotr Skawiński, Warsaw University of
Technology, PL
10:30 Lecture
Dr Norbert Tränapp, Industrieanlagen-Betriebsgesellschaft mbH IABG, DE
AEROSPACE TESTING
10:30 KEYNOTE
Elliot H. Pulham, Space Foundation, US
11:00 Coffe Break
11:00 Coffe Break
11:00 Coffe Break
11:00 Coffe Break
Certification, Air Space Integration &
Public Acceptance
AEROSPACE TESTING
KEYNOTES
11:30 NDT.VS.SHM for Composite
Structures
Alfredo Güemes, UPM, ES
11:30 Lecture
TBA, Orbital Advanced Programs Group,
US
09:45 Presentation
Prof. Sergey Chernyshev, TsAGI, RU
10:00 Presentation
Dr Georg Bridel, ALR, CH
09:50 Fuzzy set theory application at
aerodynamic calculation of an aircraft
Dr Ignat Ikryanov, TsAGI, RU
Composite Structures
10:15 Presentation
Dr Leslie J. Cohen, Hitco Carbon
Composites - Senior VP at Hitco Carbon
Composites, US
10:10 High Pressure cooling of CFG
grinding of Inconel 718 alloy
Marcin Płodzień, Rzeszow University of
Technology, PL
10:30 Panel Discussion
Prof. Richard Degenhardt, DLR (German
Aerospace Center, Braunschweig) and
PFH Göttingen, DE
10:30 Thermal and mechanical properties of ceramic-polymer composites with
an interpenetrating network structure
Joanna Ligoda, Rzeszow University of
Technology, PL
10:45 Presentation
James Thomas, The Boeing Company, US
10:50 Preparation of aircraft structural
components in the plastic process of
shaping the GLARE composites
Małgorzata Wilk, Rzeszow University of
Technology, PL
11:10 Coffe Break
11:10 Coffe Break
R&D SUMMIT: COMPOSITES
Composite Structures
HELICOPTER Technologies
11:30 Breaking Down the Barriers of
Nesting Efficiency in Composite Cutting
Avner Ben-Bassat, Plataine Technologies,
IL
11:30 The CFD Numerical and Experimental Investigations on the Aerodynamic
Fluid Flow Around the Gyroplane and the
Helicopter Fuselage
Tomasz Łusiak, Lublin University of
Technology, PL
11:45 Presentation
Dr Ben Wang, Georgia Institute of
Technology - Chief Manufacturing
Officer, Georgia Institute of Technolo12:00 Presentation
Leonard Poveromo, Composite Prototyping Center (CPC), US
12:15 Presentation
Dr John W. Connell, NASA Langley
Research Center, US
12:30 Presentation
Michael Maher, Defense Advanced Research Projects Agency DARPA, US
12:45 Presentation
Paul Oldroyd, Bell Helicotper / Textron,
Inc. - Technical Fellow, Manufacturing &
Engineering Process Development,, US
13:00 Panel Discussion
Dr Leslie J. Cohen, Hitco Carbon
Composites - Senior VP at Hitco Carbon
Composites, US
13:15 Lunch Break
Manufacturing / Production
11:50 Turn-milling of Inconel 718 whith
CBN tools
Krzysztof Jemielniak, Warsaw University
of Technology, PL
12:10 Elastic modulus of ceramic foams
designed for metal-ceramic interpenetrating composites
Dr hab. Marek Potoczek, Rzeszow
University of Technology, PL
12:30 The Airfoil Selection for Light
Transport Aircraft
Marek Szumski, Rzeszow University of
Technology, PL
12:50 Data acquisition module for process and machine tool remote monitoring
Piotr Szulewski, Warsaw University of
Technology, PL
13:15 Lunch Break
09:30 Public and Legal Perspectives on
UAS Operations – A Critical Assessment
Dr Niklas Schörnig, Peace Research
Institue Frankfurt PRIF, DE
11:30 Lecture
Doug Davis, Northrop Grumman - Director of Airworthiness, US
10:30 Nadcap: Delivering Competitive
Advantage
Joanna Leigh, Performance Review
Institute, GB
09:30 KEYNOTE
Prof. Johann-Dietrich Wörner, German
Aerospace Center DLR, DE
12:00 Development of a new Rotorhead
Concept for a light helicopter
Martin Stucki, Marenco Swisshelicopter
AG, CH
12:00 Subset Simulation for safety
evaluation of UAV automatic landing
operation
Nils Christian Mumm, Technische Universität München, DE
12:00 Method of Defects Detecting and
Thermal Stresses Calculated of the Blades
With and Without TBC based on the
Experimentally Obtained Temperature
Distributions using the Thermal Imaging
Camera
Prof. Serhiy Prokhorenko, Rzeszów
University (and Lviv Polytechnic National
12:00 Lecture
Mark Sirangelo, Sierra Nevada Corporation, US
12:30 Blue Pulse: Active rotor control at
Airbus Helicopters - New EC145 Demonstrator & Flight test results
Antoine Rabourdin, Airbus Helicopters
Deutschland, DE
12:30 A contradiction? – Mitigating
(future) DO-178C challenges while improving productivity
Dr Simon Rößner, ITK Engineering AG,
DE
12:30 Optical Measurement Techniques
for Production-Integrated Monitoring of
Compliance with Aerospace Specifications
Prof. Peter Dannenmann, RheinMain
University of Applied Science, DE
12:30 Extreme impact events and space
researc
Prof. Klaus Thoma, Fraunhofer Institute for
High-Speed Dynamics, Ernst-Mach-Institut,
EMI, DE
13:00 Lunch Break
13:00 Lunch Break
13:00 Lunch Break
13:00 Lunch Break
Oct. 29th AFTERNOON
www.airtec.aero/congress
ROOM 1
ROOM 2
ROOM 3
ROOM 4
ROOM 5
ROOM 6
13:15 Lunch Break
13:15 Lunch Break
13:00 Lunch Break
13:00 Lunch Break
13:00 Lunch Break
13:00 Lunch Break
PANEL DISCUSSION: Certification & Air
Space Integration
In-Space-Infrastructure / Orbital Infrastructure / Exploration
HELICOPTER Technologies
Additive Manufacturing
AEROSPACE TESTING
Aviation/Space Law, Space Policy
14:00 Lecture
Peter Pletschacher, Publisher and Editor
in Chief Magazine »Luft- und Raumfahrt«,
DE
14:00 Autonomous Navigation Using
Multi-Resolution Data Fusion for Robotic
Planetary Exploration
Alexandru Rusu, ONERA, FR
14:00 Programming of the milling operation of Gleason spiral bevel gears on the
4 - axis CNC laboratory machine
Piotr Błazucki, Warsaw University of
Technology, PL
14:00 FAA Commercial Space Transportation Regulations and International
Cooperation
John Sloan, FAA Office of Commercial
Space Transportation, Federal Aviation
Administration FAA - Program Lead for
International Outreach, US
AEROSPACE AVIONICS
14:30 Lecture
Prof. Stephan Hobe, LL.M., Institute of Air
and Space Law, University of Cologne,
DE
14:25 Lecture
Jens Lehmann, Deutsche Flugsicherung
DFS / Gewerkschaft der Flugsicherung
GdF, DE
14:50 Lecture
Prof. Holger Mey, Airbus Defence &
Space, DE
15:15 Lecture
Doug Davis, Northrop Grumman - Director of Airworthiness, US
14:00 AgustaWestland next generation
civil tiltrotor
Dr James Wang, AgustaWestland, IT
14:20 Manufacturing of aircraft engine
transmission gears with SLS method
Grzegorz Budzik, Rzeszow University of
Technology, PL
14:30 Lecture
Ralf Dittmann, Space Administration,
General Technologies and Robotics,
German Aerospace Center DLR, DE
14:30 Agile, Sustainable, Aerospace
Manufacturing
Paul Oldroyd, Bell Helicotper / Textron,
Inc. - Technical Fellow, Manufacturing &
Engineering Process Development,, US
15:00 On Orbit Servicing Space Robotics
Technologies
Dr Alin Albu-Schaeffer, Institute of
Robotics and Mechatronics, German
Aerospace Center DLR, DE
HELICOPTER Operations
Composites
15:00 Photoelastic analysis of stress
distribution in the helicopter control
system lever
Jacek Bernaczek, Rzeszow University of
Technology, PL
15:00 Composites and microstructure
Monika Ostapiuk, Lublin Univeristy of
Technology, PL
14:40 Additive Manufacturing: Certification in the Aircraft Market
Luis Portoles, AIMME, ES
15:20 Epoxy Resin composite Based on
Functional Hybrid Fillers
Mariusz Oleksy, Rzeszow University of
Technology, PL
14:30 ANOFOL, Light Coils from anodized Aluminium, the Alternative to copper
Dr Oliver Zimmermann, Steinert Elektromagnetbau GmbH, DE
15:00 Integrated Modular Architectures
and IMA: History and System Integration
Capabilities
Mirko Jakovljevic, TTTech, AT
15:00 Lecture
Sven Kaltenhäuser, Institute of Flight
Guidance, German Aerospace Center
DLR, DE
15:30 Computer-Aided Systems Architecting of Distributed Integrated Modular
Avionics
Björn Annighöfer, Hamburg University of
Technology / TuTech Systems Architecting
Innovation, DE
15:30 Future European Launcher Systems
Augusto González, European Commission - Head of Unit Policy and Space
Research in the Directorate General
Enterprise and Industry, BE
15:30 KaNaRiA: Design and Simulation
of an Asteroid Mining Mission based on
highly autonomous navigation
Alena Probst, Instiute of Space Technology and Space Applications, Bundeswehr
University Munich, DE
15:30 Experimental verification of the simulation of the aircraft bevel gear contact
Jadwiga Pisula, Warsaw University of
Technology, PL
16:00 Coffe Break
16:00 Coffe Break
16:00 Coffe Break
16:00 Coffe Break
16:00 Coffe Break
16:00 Coffe Break
Space Transport / Commercial Payload
KEYNOTES
Supply Chain Management
AEROSPACE AVIONICS
Aviation/Space Law, Space Policy
16:30 Presentation
George T. Whitesides, Virgin Galactic,
US
16:30 Fluted Core Skirt Development
for the Composite Cryotank Technology
Development
Dr Douglas A. McCarville, Boeing Research and Technology, US
16:30 Looking at your fuel supply chain –
How safe is your fuel?
Stefan Sulzmaier, SGS Germany GmbH,
DE
Certification, Air Space Integration &
Public Acceptance
16:30 FPGA in A&D – V&V aspects in the
context of a global collaboration model
Gopal Srinivas Prasad, Cyient GmbH, DE
16:30 Lecture
Dr Dirk-Roger Schmitt, Institute of Flight
Guidance, German Aerospace Center
DLR, DE
17:00 Fly eyes out and head up to improve safety and operational capabilities
Hans Brandtberg, Saab AB, EDS, Avionics Systems, SE
17:00 FAA Center of Excellence in Commercial Space Transportation
Madhurita Sengupta, Center of Excellence - Commercial Space Transportation/
U.S. Federal Aviation Administration
(FAA), US
17:30 Certification strategy for a nonTSO avionic function
Roland Goerke, Airbus Defence and
Space, DE
In-Space-Infrastructure / Orbital Infrastructure / Exploration
17:00 Cygnus beyond the ISS resupply
missions
Carl Walz, Orbital Sciences Corporation
- Advanced Programs Group, US
17:00 Automated Composites Lamination
– Cost vs Payback
Vern Benson, ATK Aerospace Structures,
US
17:30 SpaceLiner Concept
Dr Martin Sippel, Institute of Space Systems, German Aerospace Center DLR, DE
17:30 Sustainability made in Brazil –
natural materials in aircraft
Luciana Ribeiro Monteiro, EMBRAER, BR
16:50 Assessment of engineering design
changes by a three-filter method in the
interface between aviation OEM and
supplier
Tim Spangenberg, P3 aviation GmbH,
17:10 An approach for Organizational
Change Management in the environment
of aerospace supply chain processes
Natalie Regelmann, P3 aviation GmbH,
DE
17:30 Process Optimization for C-Parts
Kanban provision into manufacturing
and repair
Ralf Schlüter, Flugzeug-Union Süd GmbH,
DE
16:30 Certification strategy for a nonTSO avionic function
Roland Goerke, Airbus Defence and
Space, DE
Autonomy & Planning
17:00 UAV Human Factors Research at
the Institute of Flight Systems
Prof. Axel Schulte, University of the
Bundeswehr Munich, DE
17:30 Flight path planning of UAV after
failure
Andrzej Majka, Rzeszow University of
Technology, PL
17:30 Rosetta Mission Philae Landing
Prof. Tilman Spohn, Institute of Planetary
Research, German Aerospace Center
DLR, DE
Oct. 29th EVENING
ROOM 1
20:00 Get-together Evening
www.airtec.aero/congress
ROOM 2
ROOM 3
ROOM 4
ROOM 5
ROOM 6
KEYNOTES
Engines
Autonomy & Planning
Manufacturing / Production
Miscellaneous
18:00 Preliminary modeling of wrinkled
fibers in unidirectional composites
G. FRULLA, Politecnico di Torino DIMEAS, IT
17:50 Assessment of aircraft engine
blades geometric accuracy using ATOS
GOM measuring system
Paweł Rokicki, Rzeszow University of
18:00 Evaluation of UAV collision avoidance methods
Alexander Hillebrecht, IABG mbH, DE
18:00 Innovative infusion method for out
of autoclave and autoclave processes
Arne Hindersmann, German Aerospace
Center DLR, DE
18:00 Social Risk Management in Aviation – How To Dramatically Increase Performance, Minimize Risk and Profoundly
Accelerate Your Success. NASA Processes
with Documented Return-on-Investment.
Dragos Bratasanu, Success Engineering
Corp., US
20:00 Get-together Evening
18:10 Rate of crystalline perfection
turbine blades of the single crystal nickel
based CMSX-4 superalloys by X-Ray
diffraction
K. Gancarczyk, Rzeszow University of
18:20 Product development through combination of Topological Optimization and
Investment Casting using the example of
the C919
Hinge Arm, TITAL GmbH, DE
18:30 Properties of aluminide modified
coatings and TBC's deposited on turbine
blades
M. Pytel, Rzeszow University of Technology, PL
18:40 Tool-less manufacturing for single
crystal high pressure turbine parts
Heikko Schilling, FLC Flowcastings
GmbH, DE
20:00 Get-together Evening
20:00 Get-together Evening
20:00 Get-together Evening
20:00 Get-together Evening
Oct. 30th MORNING
www.airtec.aero/congress
ROOM 1
ROOM 2
ROOM 3
ROOM 4
ROOM 5
ROOM 6
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
09:00 Check-in and Morning Coffee
KEYNOTES
Spaceports / Ground Infrastructure /
Economic Aspects
HELICOPTER Operations
BavAIRia e.V. SESSION
09:30 AEROSPACE TESTING
KEYNOTES
09:30 A new simulation method for bird
strike against helicopter windscreens
Michael May, Fraunhofer EMI, DE
09:30 Testing ground for unmanned
aerial vehicles
Erwin V. Lauschner, bavAIRia e.V., DE
09:30 Who's Ahead! From Hope to
Certainty
André Ménager, TechSAT GmbH, DE
09:30 ESA Roadmaps for Future Satellites
Technologies
Dr Franco Ongaro, ESTEC/ESA European Space Agency - Director of Technical
and Quality Management and Head of
ESTEC/ESA, NL
09:30 KEYNOTE
Francois Kubica, Airbus, FR
09:30 Lecture
Udo Michalik, Secretary-General of The
Standing Conference of the Ministers
of Education and Cultural Affairs of
the Länder in the Federal Republic of
10:00 KEYNOTE
Tiit Jurimae, European Commission, BE
10:00 Lecture
Laura Canady, Space Coast Spaceflight
Alliance, US
10:00 UA Command and Control from
within the Cockpit
Tobias Paul, ESG Elektroniksystem- und
Logistik-GmbH, DE
10:00 The Unmanned Mission Avionics
Test Helicopter (UMAT) and its Flexible
Mobile Ground Control Station
Dr Hanns-Walter Schulz, ESG Elektroniksystem- und Logistik-GmbH, DE
10:00 Fuel tank resistance to HRAM:
analysis of enhanced T-joint designs
Michael May, Fraunhofer EMI, DE
10:00 Lecture
Dr Michael Menking, Astrium Satellites,
Senior Vice President, Director of »Earth
Observation, Navigation & Science«,
FR
10:30 Electrics on Composite Wings:
LATelec Solutions
TBA, LATelec, DE
10:30 Lecture
Olga Trivailo, DLR Institute of Space Systems, German Aerospace Center DLR, DE
10:30 Regional passenger transport: a
comparison analysis between helicopter
and seaplane
Francesco Castelluccio, Università degli
Studi di Palermo, IT
10:30 New Developments of EMTs Tactical Unmanned Aircraft Systems (UAS)
Sascha Lange, EMT Ingenieurgesellschaft
Dipl.-Ing. Hartmut Euer mbH, DE
10:30 The latest developments in the
market for lubricants for the aviation
industry
Dr Lutz Kogel, SGS Germany GmbH, DE
10:30 Commercial Utilization of the ISS
with Hyperspectral Imagery - MUSES
Dr John M. Horack, Teledyne Brown
Engineering, Inc. - Vice President, Space
Systems, US
11:00 New Civil Aircraft Configurations
in TsAGI Research
Prof. Sergey Chernyshev, TsAGI, RU
11:00 Lecture
Bernd Buchenberger, Invest in Bavaria,
Bavarian Ministry of Economic Affairs
and Media, Energy and Technology, DE
11:00 Functional Safety and IT-Security in
the design process
Christoph Hauck, IABG mbH, Center of
Competence (CoC) Safety, DE
11:00 Inertial Laboratory Simulation
Christopher Blum, Institute of Flight
System Dynamics (TUM), DE
11:00 Procurement
Gerd Heinrich, OHB-System AG - Director Supply Chain Management & Central
Services, DE
11:30 Coffe Break
11:30 Coffe Break
11:30 Coffe Break
11:30 Coffe Break
11:30 Coffe Break
11:30 Coffe Break
Alternative Fuels
Composite Structures
HELICOPTER Operations
BavAIRia e.V. SESSION
12:00 AEROSPACE TESTING
Enabling Technologies
12:00 Use of renewable energy in future
aviation
Dr Josef Kallo, German Aerospace
Center DLR, DE
12:00 Cast Tooling Solutions for Composites
Joe Mannion, Waukesha Foundry, IE
12:00 GNSS/WEB-GIS heliport planning
in a regional area for VTOL transport
services
Francesco Castelluccio, Università degli
Studi di Palermo, IT
12:00 Roadmap to Certification of
RPAS Sub-Components – A Case-Based
Approach
Dr Josef Mendler, ACENTISS GmbH CEO, DE
12:00 Developing Hydraulic Integration
System Test Rigs
Darryn R. La Zar, Wineman Technology,
Inc., US
12:00 Hyperspectral Imaging / ISS
Applications
Laurie Provin, Teledyne Brown Engineering, Inc. - Manager for Commercial
Imaging Partnerships, US
12:30 myCopter - Enabling Technologies
for Personal Aerial Transportation Systems: An overview of accomplishments
Frank M. Nieuwenhuizen, Max Planck
Institute for Biological Cybernetics, DE
12:30 Surveillance of wind turbines
Robert Hörmann, Aerodyne Systems
GmbH - Managing Director, DE
12:30 Ice protection systems design using
CFD and ice accretion simulation
Elia Cipolato, EnginSoft GmbH, IT
12:30 Application Potential of Small
Satellite Formations
Prof. Klaus Schilling, University Wuerzburg - Professor and Chair for Robotics
and Telematics, DE
13:00 The examination of the impact of
base technology parameters on the geometry of the teeth of spiral bevel gears
Marek Kret, Warsaw University of
Technology, PL
13:00 Lecture
Prof. Christoph Günther, Institute of Communications und Navigation, Satellite
Networks, German Aerospace Center
DLR, DE
13:30 Lunch Break
13:30 Lunch Break
12:30 The latest developments in alternative feedstock for aviation fuels
Dr Alexander David, SGS Germany
GmbH, DE
12:20 A numerical method for the
estimation of the stiffness of a porous cfrp
structure
David Chrupalla, German Aerospace
Center DLR, DE
13:00 Powerful zero-point-energy converter – Theory and experiment
Prof. Claus W. Turtur, Ostfalia University
of Applied Sciences, DE
13:00 New holding fixture concepts to
speed up reworking and measurement of
composites
Ing. Mag (FH) Christian Falch, Micado
Smart Engineering GmbH, AT
AEROSPACE AVIONICS
Military Missions & Operations
13:00 The future of Flight Data Recorder
Interfaces
Paul Hart, Curtiss-Wright, IE
13:00 RPAS - Perspective of the Luftwaffe
OTL i.G. Stephan Reitler, Kommando
Luftwaffe, DE
13:30 Lunch Break
13:30 Lunch Break
13:30 Lunch Break
13:30 Lunch Break
Oct. 30th AFTERNOON
www.airtec.aero/congress
ROOM 1
ROOM 2
ROOM 3
ROOM 4
ROOM 5
ROOM 6
13:30 Lunch Break
13:30 Lunch Break
13:30 Lunch Break
13:30 Lunch Break
13:30 Lunch Break
13:30 Lunch Break
KEYNOTES
Composite Structures
AEROSPACE AVIONICS
Autonomy & Planning
AEROSPACE TESTING
Enabling Technologies
14:30 A Perspective on Aerospace Technology Development and Transition
Brian P. Rice, University Of Dayton
Research Institute, US
14:30 An Approach towards an Optimal
Design of Composite Structures
Dr Barbara Goller, INTALES GmbH
Engineering Solutions, AT
14:30 Introduction to CAN FD
Peter Decker, Vector Informatik GmbH,
DE
14:30 Preliminary Design of Redundancy
Management System for LSA UAV Flight
Control System Based On Functional
Hazard Analysis Result
Fuad Surastyo Pranoto, LAPAN Indonesian National Institute of Aeronautics and
Space, ID
14:30 Virtual IPCT as a modern tool in
inflight IPCT tests planning
Anna Kucaba-Piętal, Rzeszow University
of Technology, PL
14:30 Enabling Technologies for Future
Satellites – Data Handling and Communications
Giovanni D‘Aliesio, MDA, CA
15:00 A dual compression Ethernet camera solution for airborne applications
Stephen Willis, Curtiss-Wright, IE
15:00 Tablet PC based UA Control Station
Tobias Paul, ESG Elektroniksystem- und
Logistik-GmbH, DE
15:00 Diagnosis system for the process of
creep-feed grinding of Inconel 718 alloy
based on multiple signals
Robert Babiarz, Rzeszow University of
Technology, PL
15:00 Lecture
Dr Bernhard Schmidt-Tedd, German
Aerospace Center DLR - Head of Legal
Support for Agency Affairs, DE
15:30 High fidelity motion cueing control
Peter Chudy, Brno University of Technology, CZ
15:30 Optimization of UAV fleet operation - System of System approach
Antoni Kopyt, Warsaw University of
Technology, PL
15:00 High Volume and Affordable
Aerospace Sealing and Shimming
Gerald Pfeiler, ViscoTec America - President/CEO, US
15:30 KEYNOTE
Mark Carlos, MISTRAS Group, US
14:50 Developments in machining for
composite tooling and parts
Peter Dickin, Delcam, GB
15:10 Conductive Polymer Based Electromagnetic Wave Absorbing Structures
Dr Engin ACIKALIN, TUBITAK MARMARA
RESEARCH CENTER, TR
15:30 Future use of the TET-Platform and
it‘s technology for high performance LEO
missions
Stephan Roemer, Astro- und Feinwerktechnik Adlershof GmbH, DE
16:00 Constraint based Decision Support
System for Medium-term Strategic Air
Traffic Flow Management
Dr Lawrence Kyei Asante, Universidad
Politecnica de Madrid, DE
16:00 High Agility Demonstration with a
New Actuator System by Small Satellite
BIROS
Christian Raschke, DLR, Optical Information Systems, DE
16:30 Multirotor UAV Navigation Data
Fusion Based Gauss Hermite Information
Filter
Hamza Benzerrouk, International Institute
for Advanced Aerospace Technologies of
St Petersburg State University of Aerospace Instrumentation, RU
16:30 Robotics Locomotion in challenging
conditions
Philippe Bidaud, French Aerospace Lab
ONERA - Scientific director and Professor
at UPMC, FR
Supply on the
Wings
UAV
HELI
SPACE
AEROSPACE
SENSORS
AEROSPACE
TESTING
AEROSPACE
AVIONICS
Scientifitc Commitee
Scientifitc Commitee
Scientific Commitee
Scientific Commitee
Scientific Committee
Chairman:
Prof. Dr Richard Degenhardt, DLR (German
Aerospace Center), Braunschweig and PFH
Göttingen, Germany
Chairman:
Prof. Dr Axel Schulte, Aircraft Dynamics and
Flight Guidance
of the Universität der Bundeswehr, Munich,
Germany
Session Chairs:
Dr Mark D. White, Flight Simulation
Manager, The University of Liverpool, United
Kingdom
Chairman:
Prof. Dr Roger Förstner,
Institute of Space Technology & Space
Applications, Universität der Bundeswehr,
Munich, Germany
Chairman AEROSPACE SENSORS:
Prof. Dr Rolf-J. Ahlers, Managing Director,
ProxiVision GmbH, Germany
Vice Chairman:
Dr Leslie Cohen, Senior Vice President,
Hitco, USA
Committee Members:
Dr Igor Bashkirov, TsAGI, Russia
Dr Mircea Calomfirescu, Airbus Defence
and Space, Manching, Germany
Ilke Dikici, Technical Consultant in Aerospace
Dr Lars Fiedler, Senior Manager, R&T Fuselage
Structure, Airbus SAS, Germany
Prof. Dr Giacomo Frulla, Turin Polytechnic
University, Italy
Prof. Dr Harald Funke, Aachen University of
Applied Sciences, Germany
Gila Ghilai, Director of Airframe Design &
Analysis, Israel Aerospace Industry, Israel
Prof. Dr Alfredo Guemes, Polytechnic
University of Madrid, Spain
Dr Tomas Ireman, Senior Manager, Head
of Loads, Stress and Dynamics, SAAB,
Sweden
Dr Josef Kallo, Head of Group Fuel Cell and
Battery Systems, DLR Stuttgart, Germany
Dr Gregorio Kawiecki, Boeing, Spain
Dr Douglas McCarville, Boeing, USA
Francois Kubica, A380 Chief Engineer,
Airbus SAS, France
Dr Matthias Meyer, Vice President, MAG
Composites, Germany
Prof. Dr Janusz Narkiewicz, Warsaw
University of Technology, Poland
Reinald Pfau, Premium Aerotec, Germany
Prof. Dr Murray Scott, CEO, Advanced
Composite Structures Australia, Melbourne,
Australia
Prof. Dr Romana Ewa Sliwa, Rzeszow
University of Technology, Poland
Prof. Dr Bernd Steckemetz, University of
Applied Sciences Bremen, Germany
Dr Jens Telgkamp, Head of Fuselage and
Generic Structure Design - ESDSR, Airbus
SAS, Germany
Sam Wilson, Bombardier, United Kingdom
Vice Chairman:
Prof. Dr Dieter Moormann, Institute of Flight
System Dynamics,
RWTH Aachen University, Germany
Commitee Members
Dr Alin Albu-Schäffer, Director DLR-German
Aerospace Centre for Robotics and
Mechatronics, Wessling, Germany
Christopher C. Ames, Rear Admiral, US
Navy (Ret.), Director, International
Strategic Development, General Atomics,
Aeronautical Systems, USA
Prof. Dr David Bird, Emeritus Professor of
Wildlife Biology and Editor of Journal of
Unmanned Vehicle Systems Department
of Natural Resource Sciences, McGill
University, Canada
Thomas Gottmann, Senior Manager
Barracuda / Agile UAV NCE, Airbus
Defence and Space, Germany
Prof. Dr Florian Holzapfel, Institute of Flight
System Dynamics,
Technical University of Munich Germany
Dr René Knorr, Director UAS Programms,
ESG Elektroniksystem- und
Logistik GmbH, Germany
Dr Reimund Kueke, Head of Business
Development, Airbus Defence and Space,
Germany
Peter Loef, Network Manager, EurA Consult
AG and CEO – AIR e.V., Germany
James A. Moseman, Director Europe and
NATO, Northrop Grumman
International, Belgium
Francisco A. Navarro, Chief ATM Scientist
UAS Management, Boeing
Research & Technology Europe
Brigadier a.D. Hans-Georg Schmidt,
Chairman Military ATM Board Eurocontrol,
Belgium
Brigadier a.D. Gerhard Schulz, bavAIRia
Aerospace Cluster, Germany
Dr Norbert Tränapp, IABG IndustrieanlagenBetriebsgesellschaft mbH,
Germany
Hans W. Weber, Vice President Heavy
Transport Helicopter Program &
UAV, Airbus Helicopters, Germany
Dr Moshe Zilberman, Director of Marketing
& Sales, Engineering Division, IAI, Israel
Committee Members:
Prof. Dr Salvatore Amoroso,
Energy Department Section Engineering and
Transport, University of Palermo, Italy
Chief Superintendent M.A. D.–H. Bothe, Air
Transport Helicopter Pilot, Federal Police,
Germany
Konstantin Kampa,
Head of Technical Expertise & Manager
General Engineering,
Airbus Helicopters, Germany
Il’ya Taratonov,
Center of Innovations and Competence,
RUSSIAN HELICOPTERS, Russia
Dr James Wang,
Vice President R&D, AgustaWestland, Italy
Martin Stucki,
CEO, Marenco Holding AG, Switzerland
Vice Chairman:
Dr Cornelius Schalinski,
Head of Sales Institutional Projects, OHBSystem AG, Germany
Dr Alin Olimpiu Albu-Schäffer,
Director DLR-German Aerospace Centre for
Robotics and
Mechatronics, Wessling, Germany
Dr Major Chahal, Head of Technology
Transfer and Standards,
UK Space Agency, United Kingdom
Richard Coleman, President,
Space Transportation Association, USA
Giovanni D’Aliesio, Manager New Business
Electronics, MDA, Canada
Dr Juergen Drescher, Director DLR-German
Aerospace Centre Washington D.C. Office,
USA
Steve Eisenhart, Senior Vice President Strategic & International Affairs
Space Foundation, USA
Hon. Prof. Dr Eveline Gottzein,
Processing & Platform Equipment, Airbus
Defence and Space, Germany
Dr Peter Hofmann, Director Business
Development Space, Kayser-Threde GmbH,
Germany
Prof. Dr Jean de Lafontaine,
President NGC Aerospace Ltd., Professor
Université de Sherbrooke, Canada
Miranda Musialek, Director Space, Business
Development Directorate, ONERA Palaiseau,
France
Prof. Dr Alexander Nebylov,
Director of IIAAT SUAI,
St. Petersburg, Russia
Matthieu Roulet, Head of Strategy &
European Business Development, Airbus
Defence and Space, France
Stewart Sanders, SVP, Planning &
Procurement, SES S.A., Luxembourg
Prof. Dr Klaus Schilling,
University of Würzburg, Germany
Dr James Sutter, NASA Glenn Research
Centre, Cleveland, USA
Frank Slazer, Vice President, Space Systems,
Aerospace Industries
Association, USA
Chairman AEROSPACE TESTING:
Prof. Dr Stephen GR Brown, Director of
Research, College of Engineering, Swansea
University, United Kingdom
Chairman AEROSPACE AVIONICS:
Dr Mirko Jakovljevic, Senior Marketing
Manager, TTTech Computertechnik AG,
Austria
Committee Members:
Dr Orlando da Costa, Technical Manager
UAS, IABG, Germany
Dr Johann Dambeck, Chief Engineer
TAURUS System, MBDA-D, Germany
Prof. Dr Stefanos Fasoulas, Deputy Director,
Institute of Space Systems, University of
Stuttgart, Germany
Prof. Dr Hans-Jörg Fecht, Director Institute of
Micro and Nanomaterials, Ulm University,
Germany
Roland Goerke, Avionic Systems, Airbus
Defence and Space, Germany
Dr Ute Hörmann, Acount Manager
Consumer Testing Services,
SGS Institut Fresenius GmbH, Germany
Dr Bernhard Keidel, R&D Project Manager,
EMT, Germany
Thomas Löffler, Senior Engineer Integrated
Navigation Systems, Diehl BGT Defence,
Germany
Professor Bernd Mayer, Managing Director,
Fraunhofer IFAM, Germany
Prof. Dr Reinhard Reichel, Director, Institute
of Aircraft Systems ILS, Germany
Dr
Carmine
Salzano,
International
Aerospace
Defense
Manager,
PCB
Aerospace and Defense, USA
Prof. Dr Frank Thielecke, Institute of Aircraft
Systems Engineering, Technical University of
Hamburg-Harburg, Germany
Eric
Whitley,
Business
Development
Manager, Silicon Sensing Systems
Ltd, United Kingdom
1532|2909
Congress Fees
Registration
3 Days
2 Days
1 Day
Early Bird until Sep. 15th
€ 845.–
€ 695.–
€ 495.–
Standard
€ 995.–
€ 845.–
€ 585.–
Governmental Institutions1
€ 299.–
€ 249.–
€ 199.–
Students
free
free
free
Military Delegations in uniform
free
free
free
Exhibitors / Co-Exhibitors2
free
free
free
The congress fee includes admission to the complete congress including all symposia and the exhibition, lunch and refreshments, documentation, proceedings CD. Free of charge participation does not
include lunch. Congress Fees include VAT.
1. i.e. Universities, Research Organizations, DLR, Fraunhofer, TNO, …
2. Each exhibitor / co-exhibitor receives one congress pass free of charge.
Additional passes are subject to a 50% discount.
Entrance fee to the get-together evening on October 29th costs EUR 95.–
Reduced Speakers’ Fees
Registration
3 Days
2 Days
1 Day
Speakers
€ 495.–
€ 390.–
€ 345.–
€ 199.–
€ 169.–
€ 149.–
Governmental Institutions
1
B2B-Meetings
Procurement Manager / Buyers
Supply Chain Manager
Manager Research and Technology
Manager Development / Developers
Project Manager
Project Engineers
free of charge
Sales Manager
Business Development Manager
exclusive to AIRTEC’s exhibitors
Exhibition
Surface rental starting at
€ 389 / sqm min size 12sqm
Ready installed systems
€ 116 / sqm Type “Westend”
€ 136/ sqm Type “Airport”
All Prices plus VAT
www.airtec.aero/congress
Organiser: airtec GmbH & Co. KG, P.O. Box 700 164, 60551 Frankfurt, Germany
Please note: Students‘ rates do not apply for speakers. Congress fees include VAT.