(TO BE DISCONTINUED) LED Underwater (UL_5D4) Specification Sheet Ordering Guide

(TO BE DISCONTINUED) LED Underwater (UL_5D4) Specification Sheet
Project Name:
Location:
MFG: Philips Hadco
Fixture Type:
Catalog No.:
Qty:
Ordering Guide
Example: UL_5D4 W 5D4 H W H
Product Code
UL_5D4
(TO BE DISCONTINUED) LED
Underwater
Optics
W
Wide
LED
5D4
LED
Output
H
L
High
Low
CCT
W
C
Warm 3000K
Cool 4000K
Finish
H
Bronze
*1
*1 Please note that a finished product code will look similar to the following:
ULW5D4HWH. The example shown above is incorrect due to website coding
procedure.
Specifications
HOUSING:
Cool external temperatures - all below 31ºC when underwater - so the luminaire is cool to the touch, including the lens. Perfect for high pedestrian traffic and plant life applications.
Exceeds European standard EN 563 both 1 second (85ºC for composite, 80ºC for glass) and 4 seconds (74ºC for composite, 70ºC for glass) of contact. One-piece injection
molded ULTEM® High Performance Polymer composite. Lens ring is a Single-piece injection molded ULTEM® High Performance Polymer with gasketed lens. Twist-off operation
for ease of maintenance. Fasteners are 300 series stainless steel.
FINISH:
Composite is textured, pressure formed, molded-in-color.
OPTICAL ASSEMBLY:
Integral collimating wide flood (40°) optics. Clear convex lens, high temperature glass furnished with silicone O-ring for watertight seal.
ELECTRICAL ASSEMBLY:
Powered by Advance™: Integral Advance™ electronic LED driver. UL class2. -40ºC/F minimum starting temperature. Standard 10 ft. 18-2, 105° C, STWA water-resistant cord.
Fixture is prewired and potted to prevent water entry. Input voltage range (VAC): 10.8 - 17.5. Input frequency: 60Hz. (magnetic low voltage transformer required). Integral surge
protector built into LED driver circuit. 12 volts, 12.4 total watts consumed (high power) or 5 total watts consumed (low power). 12 Volt system requires remote transformer, not
included.
IP RATING:
IP66/68: Dust-tight and dual rated - sealed against direct jets of water and against continuous submersion in water tested to 1 meter (3.28 feet).
LAMPING:
White high brightness (HB) LEDs. Deliver 70% lumen maintenance at 50,000 hours. Cool white (4,000K nominal). Warm white (3,000K nominal).
WARRANTY:
5 year extended warranty
CERTIFICATIONS:
ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.
Height :
6 11/16" (170mm)
Width:
ISO 9001:2008 Registered
Page 1 of 2
Note: Philips reserves the right to modify the above details to reflect changes in the cost of materials and/or production and/or design without prior notice.
100 Craftway Drive, Littlestown, PA 17340 | P: +1-717-359-7131 F: +1-717-359-9289 | http://www.hadco.com | Copyright 2013 Philips
HW2
(TO BE DISCONTINUED) LED Underwater (UL_5D4) Specification Sheet
Project Name:
Location:
MFG: Philips Hadco
Fixture Type:
Catalog No.:
Qty:
4 1/16" (103mm)
Max. Weight:
5.04 lb.
ISO 9001:2008 Registered
Page 2 of 2
Note: Philips reserves the right to modify the above details to reflect changes in the cost of materials and/or production and/or design without prior notice.
100 Craftway Drive, Littlestown, PA 17340 | P: +1-717-359-7131 F: +1-717-359-9289 | http://www.hadco.com | Copyright 2013 Philips
HW2