Download Report

Dansk standard
Tillæg
DS/EN 13445-3:2014/
A1:2015
1. udgave
2015-04-08
Ufyrede trykbeholdere –
Del 3: Konstruktion
Unfired pressure vessels – Part 3: Design
DS/EN 13445-3:2014/A1:2015
København
DS projekt: M263764
ICS: 23.020.30
Første del af denne publikations betegnelse er:
DS/EN, hvilket betyder, at det er en europæisk standard, der har status som dansk standard.
Denne publikations overensstemmelse er:
IDT med: EN 13445-3:2014/A1:2015.
DS-publikationen er på engelsk.
DS-publikationstyper
Dansk Standard udgiver forskellige publikationstyper.
Typen på denne publikation fremgår af forsiden.
Der kan være tale om:
Dansk standard
• standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller
• standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard
DS-information
• publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller
• publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en
teknisk rapport, eller
• europæisk præstandard
DS-håndbog
• samling af standarder, eventuelt suppleret med informativt materiale
DS-hæfte
• publikation med informativt materiale
Til disse publikationstyper kan endvidere udgives
• tillæg og rettelsesblade
DS-publikationsform
Publikationstyperne udgives i forskellig form som henholdsvis
• fuldtekstpublikation
(publikationen er trykt i sin helhed)
• godkendelsesblad
(publikationen leveres i kopi med et trykt DS-omslag)
• elektronisk
(publikationen leveres på et elektronisk medie)
DS-betegnelse
Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr.
er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i
hovedstandarden.
DS-betegnelse angives på forsiden.
Overensstemmelse med anden publikation:
Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD
• IDT:
Når publikationen er identisk med en given publikation.
• EQV:
Når publikationen teknisk er i overensstemmelse med en given publikation, men
præsentationen er ændret.
• NEQ:
Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en
given standard, men udarbejdet på baggrund af denne.
• MOD:
Når publikationen er modificeret i forhold til en given publikation.
EUROPEAN STANDARD
EN 13445-3:2014/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2015
ICS 23.020.30
English Version
Unfired pressure vessels - Part 3: Design
Récipients sous pression non soumis à la flamme - Partie 3
: conception
Unbefeuerte Druckbehälter - Teil 3: Konstruktion
This amendment A1 modifies the European Standard EN 13445-3:2014; it was approved by CEN on 10 January 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN
All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members.
Ref. No. EN 13445-3:2014/A1:2015 E
EN 13445-3:2014/A1:2015
Contents
Page
Foreword ..............................................................................................................................................................3
1
Modification to C.1 .................................................................................................................................4
2
Modification to C.7 .................................................................................................................................4
3
Modification to C.8 .................................................................................................................................4
2
EN 13445-3:2014/A1:2015
Foreword
This document (EN 13445-3:2014/A1:2015) has been prepared by Technical Committee CEN/TC 54 “Unfired
pressure vessels”, the secretariat of which is held by BSI.
This Amendment to the European Standard EN 13445-3:2014 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by September 2015, and conflicting
national standards shall be withdrawn at the latest by September 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 97/23/EC.
For relationship with EU Directive 97/23/EC, see informative Annex ZA, which is an integral part of EN 134453:2014.
This document includes the text of the amendment itself. The corrected pages of EN 13445-3 will be
published in July 2015 as Issue 2 of the standard.
NOTE
This document was initially submitted to Enquiry under the reference EN 13445-3:2009/prA2:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3
EN 13445-3:2014/A1:2015
1
Modification to C.1
Replace the last but one paragraph by:
Provisions are given in C.8 for vessels or vessel parts working in the creep range.
For vessels or vessel parts working in the creep range it is necessary that the requirements for loading of noncyclic nature given in 5.4.2 or 17.5 respectively are considered to be met (i.e. the number of full pressure
cycles or equivalent full pressure cycles is less than 500 or N eq respectively).
In the present edition of the standard no rule concerning creep/fatigue interaction is given in this Annex. If this
interaction is to be taken into account, the design methods of Annex B may be used.
This Annex is currently limited to sufficiently ductile materials, like the whole standard, but it is, for
components operating in the creep range, also limited to sufficiently creep ductile materials, as defined in
EN 13445-2:2014.
2
Modification to C.7
Replace the heading by the following
C.7 Non-creep assessment criteria
3
Modification to C.8
Add a new Clause C.8
C.8 Creep assessment criteria
C.8.1 Equations to be used
In Annex C, stresses which relate to the different stress categories (e.g. membrane, membrane plus bending,
primary plus secondary stresses, etc.) are calculated. Allowable values for these are also specified. For creep
design, the equations of interest are reproduced below:
(σ
)
≤ f
eq Pm
(C.8-1)
(σ
) ≤ 1,5 ⋅ f
eq PL
(C.8-2)
(σ
) ≤ 1,5 ⋅ f
eq P
(C.8-3)
( ∆σ
)
≤ 3⋅ f
eq P + Q
(C.8-4)
NOTE
Subscript P, which means general or local primary membrane plus primary bending stresses is not mentioned
in C.3 where symbols used in Annex C are defined. It is defined through Formula (C.6-1).
4