1. No category

High Abuse Mini FL / HID / LED Collection
C30 · C36 · C37 · C38
High Abuse/Wall or Ceiling Luminaire
order example:
C37-LED20-CT4-UNV-EBX
-CA-REML-WHT
SERIES
C30 C30 Clear Prismatic Lens Series
C36 C36 Down Light, Painted Lens Series
C37 C37 Clear Prismatic Lens with Perimeter
Paint
C38 C38 Painted Eyelid Series
LAMP TYPE
DBX Double Biax Mini-Fluorescent
TBX Triple Biax Mini-Fluorescent
LED Light Emitting Diode
[req’s CA]
C36 Series
C30 Series
NO. OF LAMPS/WATTAGE; COLOR TEMPERATURE
DBX
[1-2]26
C30
C36
C37
C38
C37 Series
TBX
[1]18; [2]18-CA
[1]26; [2]26-CA
[1]32; [2]32-CA
[1]42-CA
LED
15-CA
25-CA
CT3 ±3000K LED Color Temp
CT4 ±4000K LED Color Temp
CT5 ±5000K LED Color Temp
C38 Series
VOLTAGE
120 120 Volts
277 277 Volts
347 347 Volts [req’s CA]
UNV 120~277 Universal Volt
Must Specify Voltage for EM option
10.75"
BALLAST
EBX Electronic Ballast/Driver
10.75"
4.25"
Shown with CA
Shown with CSTB
OPTIONS
CA 1.5” Aluminum Backbox/Surface Conduit
CSTB 4.5” Deep Cast Aluminum
Backbox/Surface Conduit
DIM Dimming Ballast
*Refer to DIM Table for options
EM Integral Emergency Battery [req’s CA]
– Must Specify Voltage [120V or 277V];
*Refer to EM Table for options]
Catalog Number
Project Name & Location
FUS Fuse and Fuseholder
GN Generator Transfer Device
MDX External Motion Detector [req’s CA]
– Specify "A" for single circuit-all on, all off;
"B" for dual circuit, half on half off
Specify Finish: Bronze or White
PHT1 Integral Photocell 120V [req’s CA]
PHT7 Integral Photocell 277V [req’s CA]
REM Remote Emergency Battery
Type
Due to continual innovations and improvements all specifications are subject to change without notice.
Product Specifications
BACKPLATE: 16 Ga. aluminum formed for rigidity.
BALLAST: 120 or 277 Volt, extreme temp range
-30°C to 90°C, HPF electronic ballast [EBX] for FL.
GASKETING: 1-piece standard die cut .1875” thick
black EPDM and/or neoprene rubber. Optional
conduit adapter has 4-piece die cut .1875” thick
neoprene rubber cut and placed on box.
GROUND WIRE: Insulated green pre-attached wire.
LAMP: [DBX] Double Biax, [TBX] Triple Biax, [LED]
Light Emitting Diode.
LENS: Injection molded .125” thick clear prismatic
polycarbonate completely enclosed fixture.
LENS FASTENERS: 4 stainless steel tamperproof
screws to secure lens to backplate.
MOUNTING HOLES: 4 .3125” dia. holes for .25”
dia. bolts. Carriage bolts must be used with conduit
adapter.
UL/ULC LISTED Suitable For Wet Location.
NOTE: *For Dimming and Emergency Options refer
to Dimming Ballast Table and Emergency Battery
Table located at the end of a catalog under "Technical Info/Miscellaneous/Emergency" tab.
11.04.14
self-contained in CA
– Must Specify Voltage [120V or 277V];
Refer to EM Table for options]
*
SU Surge Protection for LED fixtures
TPD Tamperproof Screwdriver
FINISH
BK
BZ
CC
SV
WHT
Black
Bronze - Standard
Custom Color
Silvadillo Gray
White
CGF design Inc | PO Box 911 | Morton Grove, IL 60053 | p: 847.815.5079 | f: 847.470.9828 | http://www.cgfdesigninc.com | [email protected]
Superb combination of classic styling, spec-grade construction and energy efficient illumination.
High Abuse Series luminaires provide smooth, wide spread accent and security lighting with
superior weather and vandal-resistant design features.
79