1. No category

PHSD75
7.5” Round Flush-Lens Downlight
Horizontal Lamp
SPECIFICATIONS
•• Housing – 20-gauge, die-formed, galvanized steel
pan/plaster frame with yoke mount.
•• Door Frame – Die-cast aluminum with textured
matte white polyester TGIC powder coat bonded to
phosphate-free, multi-stage pretreated metal.
•• Reflector – Low-iridescent aluminum with clear
semi-specular finish.
•• Shielding – Clear tempered glass standard.
•• Electrical – Electronic ballast. Prewired at factory
for easy field installation.
•• Mounting – Recessed.
•• Labels – UL/CUL listed for through-branch circuit
wiring and wet location under covered ceiling.
EXAMPLE
PHSD75
t
-
2 32T
t
SERIES
t
-
OPTIONS
-
E B2
t
NUMBERWATTAGE/
OPTIONS
OF LAMPS TYPE
-
UNV
t
t
BALLAST
TYPE
VOLTAGE
FEATURES
ORDERING INFORMATION
PHSD75 Series features decorative
textured white die-cast aluminum
trim with clear tempered glass lens.
Horizontal lamp and low-profile design
create uniform distribution from a source
that fits into shallow plenums.
•• Clear tempered glass lens standard,
other lenses available.
•• Sturdy one-piece pan construction with
yoke mount.
•• Adjustable hanger brackets with bar
hangers standard.
•• Easy-access, 14-gauge galvanized steel
junction box with two snap-on covers.
•• This fixture is proudly made in the USA.
SERIES
PHSD75
BALLAST TYPE
EB1
1-lamp electronic ballast
2-lamp electronic ballast
EB2
EBD1*__ 3 1-lamp electronic dimming ballast
(120V or 277V only, must specify) 3
EBD2*__ 3 2-lamp electronic dimming ballast
(120V or 277V only, must specify) 3
7.5” Round Flush-Lens Downlight
LAMP OPTIONS
See page 430 for lamp base data.
# OF LAMPS
WATTAGE/TYPE
1
26Q, 32T, or 42T
2
18Q, 26Q, 32T, or 42T
VOLTAGE (Must specify)
120
277
UNV
OPTIONS
For EM ballast options (120V or 277V only, must
specify voltage), see page 429.1
See page 427 for lens/trim options.
CPL
Clear polycarbonate lens
Clear prismatic tempered glass lens
CPG
Fuse (must specify voltage)
F
Tamper-resistant 2
TP 2 CCEA
Chicago plenum (CP)
1
2
3
EM ballast must be remote mounted.
This option requires a tamper-resistant tool (must be
ordered separately). Please specify quantity required per
project.
Must specify manufacturer and voltage. See page 429 for
dimming ballast options.
7-3/16”
ø7-3/16”
ø10-1/16”
Pan Size: 12” x 16-1/4”
Ceiling Cutout: ø9-1/8”
QUANTITY ESTIMATOR
Item # PHSD75-232T
Room Size
20’ x 20’ (400 sq. ft.)
30’ x 30’ (900 sq. ft.)
40’ x 40’ (1,600 sq. ft)
± 50 fc.
6
16
25
± 75 fc. ± 100 fc.
9
16
20
30
42
56
Calculations based on standard reflectance of 80/50/20 and a light
loss factor of 1.0 with a 10’-0” ceiling height.
272
| Recessed Fluorescent
120V
277V
120-277V
LGV31052.081913MP Information contained herein is subject to change without notice.