DV YARD
MIG/MAG
wire feeder
for CC - CV
MMA power
sources
Decisive advantages:
• Very portable rugged design with strong ergonomic carry
handle which lays flat when not needed
• Connect to virtually any DC welding power source in seconds
• Excellent performance with flux cored (with or without gas)
and solid welding wires with unbeatable arc stability
• 4 roll drive system to guarantee trouble free wire feeding.
• Heavy duty contactor fitted to start and stop and cope
with current up to 425 A
• Torch trigger latching 2T/4T and burn back control standard
• Standard Euro torch connection
• Takes 15 kg spools
www.saf-fro.com
2014-570
The DV YARD wire feeder can be
adapted to most direct current MMA
2014-531
Portable MIG wire feeders for 15 kg spool size
to plug directly to CC or CV power sources.
Ideal for DC MMA power sources.
power sources and can use standard
300 mm diameter wire spools.
Its power supply is ensured directly
2014-528
by the arc voltage. It is therefore
very simple to implement and does
not require an auxiliary transformer.
Using the DV YARD wire feeder you
can transform your MMA power
source into an authentic MIG/MAG welding source. Air Liquide Welding
recommends to use it with CV power source for best welding performances.
When properly installed, the DV YARD will enable you to obtain high-quality
welds with a good visual appearance.
The DV YARD wire feeder is robustly constructed in a reinforced moulded case
to give a fully enclosed wire feed unit which is well sealed against the elements.
Due to rugged construction they are ideal for all site welding in harsh
with an extra heavy duty contactor with oversized contacts to allow welding
up to 425 A.
TECHNICAL CHARACTERISTICS
Roller plate
4 rollers
Input voltage range
14-48 VDC 15-110 OCV
Welding current range
50 A to 425 A
Duty cycle @ 60% (40 °C)
425 A
Wire speed range
1.2 to 20 m/min
Wire diameter
0.8 to 2.4 mm
Protection index
IP 23S
Insulation class
H
Standards
EN 60974 - 1 / EN 60974 - 10
Size (LxWxH)
600 x 220 x 420 mm
Weight
13.9 kg
TO ORDER
Rugged plastic case
DV YARD wire feeder
W000382134
DV YARD FM (wire feeder with flow meter)
W000382135
ed with
can be us ALO
D
R
A
Y
V
D
and BUFF
RODARC er sources
o
MMA p w
Air Liquide Welding France
13 rue d'Epluches - CS 10113 - Saint-Ouen-l'Aumône - 95315 Cergy Pontoise Cédex - France
Tél. : + 33 1 34 21 33 33 - Fax : + 33 1 34 21 31 30
www.airliquidewelding.com
Copyright ALW - 11/14 -PLDB 9357 - Air Liquide Welding France reserves the right to carry out modifications to its machinery without prior notice.
The manufacturer accepts no liability for illustrations, descriptions and characteristics, which are for information only.
environments and are also easily portable. The DV YARD wire feeder is fitted