WATERPROOFING WET AREAS

WATERPROOFING
WET AREAS
CONSTRUCTION CHEMICALS DIVISION
Pidilite manufactures and markets a wide range of construction chemical products under two brands Dr. Fixit &
Roff covering different aspects of construction like waterproofing, building repairs, tile fixing, sealants, flooring
and grouts. Our Construction Chemicals products are also available in over 30 other countries
STATE-OF-THE-ART WATERPROOFING SYSTEMS
COMPANY PROFILE
Pidilite Industries has been the pioneer and market leader in adhesives and sealants, construction chemicals,
art & craft products and polymer emulsions in India. Pidilite has some of the biggest brands in adhesives and
sealants category. These brands include Fevicol, M-seal and Fevikwik. Fevicol have become synonymous with
adhesives to millions in India and is ranked amongst the most trusted brands in the country. Some of our other
major brands are Dr. Fixit, Pagel & Roff in Construction Chemicals, Cyclo and Motomax in auto care, Ranipal in
fabric care, Fevistik glue stick and Hobby Ideas that is a Do-It-Yourself range of hobby and craft products.
STATE-OF-THE-ART MANUFACTURING AND R&D
We develop most of our products in-house with the help of a strong, research-driven innovation led with
consumer insights. All the products are manufactured under ISO 9000 certification. Our R&D team works
closely with the marketing and technical service team to develop and enhance products that meet the
continuously changing requirements of our customers.
Waterproofing is a process that is designed to prevent water from penetrating a structure. Typically
waterproofing is done in various layers and stages to create multiple barriers so that water cannot penetrate
the structure. A combination of such stages is referred to as creating a “Building Envelope”.
However, often not enough importance is given to this very crucial area while constructing new structures.
Over reliance on conventional and outdated systems, low awareness about modern waterproofing systems
and lack of trained expertise for application are some of the reasons for the same. Here’s where Dr. Fixit
can help you to get the best waterproofing solutions for your new constructions. Dr. Fixit is India’s leading
brand in Waterproofing with a wide variety of products and solutions to meet all your waterproofing needs
- from foundations to walls to roofs. With access to the latest global technologies through its international
subsidiaries and R&D centres,
Dr. Fixit constantly brings innovative waterproofing solutions. Dr. Fixit also offers full technical support with
large pool of trained applicators.
Call us now to benefit from our state-of-the-art waterproofing systems for your new constructions.
Water retaining structures such as swimming pools, water tanks and also
other wet areas like kitchens and bathrooms are the biggest source of
leakages in constructions.
Dr. Fixit provides specialised waterproofing systems with a combination
of elements that are required to achieve a waterproof barrier. These
systems provide excellent resistance to hydrostatic water pressure
ensuring leak free structures for years.
WATERPROOFING
SYSTEMS
Dr. fixit
Solutions
BATHROOMS
Dr. Fixit Bathseal Kit
6
Elevated swimming pool –
Internal side
Dr. Fixit Extensa and
dr. fixit Fastflex
8
BELOW GROUND SWIMMING POOL –
External side
Dr. Fixit Samshield XL
10
BELOW GROUND SWIMMING POOL –
Internal side
Dr. Fixit Fastflex
12
WATERPROOFING OF OVERHEAD AND
UNDERGROUND WATER TANKS
Dr. Fixit Fastflex
14
WATERPROOFING OF EFFLUENT
TREATMENT PLANT
Dr. Fixit Coal tar epoxy and
Dr. Fixit Samshield XL 2100
15
BATHROOMS
Dr. Fixit Bathseal
Roofseal Kit
Easy to use multi product kit for
bathroom waterproofing
One stop solution for 100% leak-free bathrooms
One kit for one
bathroom
Easy to use AND
affordable
Prevents
damage to
expensive
interiors
System life
Expectancy –
10 years
Methodology
Wall
Components
•
Dr. Fixit Bathseal Tape – for high bond between PVC and cementitious
surface.
•
Dr. Fixit Bathseal Grout - for filling gaps around pipes.
•
Dr. Fixit Bathseal WPC - for sunken portion and splash zone.
•
Dr. Fixit Pidicrete URP for angle fillet.
Dr. Fixit Tile Grout
Dr. Fixit Tile Adhesive
Screed
A'
Tiles
DETAIL 'A'
FFL
Angle Fillet
Brick Bat Coba
Dr. Fixit Bathseal WPC
Concrete Floor Slab
Dr. Fixit Grout
Dr. Fixit Bathseal tape
Drainage pipe
SURFACE PREPARATION
Clean the surface thoroughly to get rid of all contaminants. Remove all surface
imperfections and repair with a polymer modified mortar using Dr. Fixit Pidicrete
URP.
APPLICATION
1. Seal sanitary pipes entering through the walls and floor with Dr. Fixit
Bathseal Tape and grout the gaps with Dr. Fixit Bathseal Grout — a non-shrink
cementitious grout.
Tile
1500 mm
2. Apply the first coat of Dr. Fixit Bathseal WPC in the sunken area and extend up
to 150 mm on the walls and above the finished floor level (FFL).
5. The sunken portion can then be filled using Brickbat Coba with Dr. Fixit
Pidiproof LW+.
6. Fill the sanitary gaps with elastomeric sealant to complete the bathroom
waterproofing.
100 mm
1800 mm
WET AREA
Roff Rainbow
Tile Mate
300 mm
4. Apply the 2nd coat of Dr. Fixit Bathseal WPC over the angle fillets and allow it
to dry completely.
Screed
DRY AREA
3. Immediately cover all the angle fillets with a 150 mm wide strip of open woven
glass fibre mesh of 2 mm x 2 mm.
Brickbat Coba
Dr. Fixit Bathseal
Sealant
Sandwiched
Fibre Mesh
Dr. Fixit
Bathseal WPC
Dr. Fixit
Bathseal Grout
Dr. Fixit Bathseal Tape
Concrete Slab
7
Elevated swimming pool
– Internal side
Dr. Fixit Extensa AND
Dr. fixit
Fixit Fastflex
Roofseal
dr.
Highly flexible, tough waterproofing system
that easily bears pressure exerted by water
column
Internal waterproofing protection for elevated
swimming pools at podium or any other floor
HIGH ELASTIC
FILLER
Elongation
in excess of
1000%
IMPERMEABLE
TO WATER
Sets instantly
with high bond
to concrete
Concrete Wall
Methodology
Grout
Bathseal tape
SURFACE PREPARATION
Roff RTM Epoxy - Tile Grout
Tile
Tile Adhesive
Dr. Fixit Fastflex 3rd Coat
With Sand Sprinkle
1. Clean the surface thoroughly to get rid of all contaminants. Remove all surface
imperfections and repair with a polymer modified mortar using Dr. Fixit Pidicrete
URP.
Dr. Fixit Fastflex 2nd Coat
Shortcrete With Steel Cage
Dr. Fixit Extensa
Angle Fillet
2. Light fitting casings, pipes, inserts, etc., provided in the concrete raft floor and
walls are to be grouted with a non-shrink grout, Dr. Fixit Bathseal Grout, and
inserts shall be wrapped around with Dr. Fixit Bathseal Tape to ensure a watertight fitting.
APPLICATION ON RAFT SLAB
1. Spray on Dr. Fixit Extensa up to the top and cover the overflow concrete
channels all around the periphery of the pool to achieve a minimum thickness of
2.0 mm
2. Place a geotextile fabric of 150 gsm over the membrane before laying the steel
cage.
3. As per the plans drawn up by the structural engineer, lay the steel cage
accordingly.
Floor Concrete
2 Dr. Fixit Extensa
1
11
4. Concrete spacers ensure the steel is not against the wall or the floor of the pool.
3 Steel Cage with Pedestal
5. This system allows shotcrete to be evenly distributed under and above the steel.
4 Short-Crete
6 Dr. Fixit Fastflex (3 coat with Sprinkled Sand)
rd
7. Apply the 1st coat of Dr. Fixit Fastflex maintaining the saturated surface dry
condition and embed a glass fibre mesh of 50 gsm immediately.
9. After the 2nd coat is completely dry apply a 3rd coat of Dr. Fixit Fastflex and
sprinkle coarse sand while it is still wet. This will provide the key for subsequent
tile adhesive materials.
9
5 Dr. Fixit Fastflex (2 coats)
6. Now the shell of the swimming pool is ready to receive further waterproofing.
8. Immediately apply the 2nd coat to sandwich this glass fibre mesh between the
Dr. Fixit Fastflex coatings.
10
7 Roff NSA & Roff RTM Tile Grout
8 Concrete Wall
9 Pipe Inlet Fitting Dr. Fixit Bathseal Tape &
Dr. Fixit Bathseal Grout
8
7
6
5
10
Light Fitting Casing with Dr. Fixit Bathseal Grout &
Dr. Fixit Bathseal Tape
4
11
Steel Grating
2
3
1
10. Tiles shall then be applied using tile adhesives from the ROFF range depending
upon whether they are glass mosaics, or ceramics.
9
BELOW GROUND SWIMMING
POOL – External side
Dr. Fixit Samshield
Roofseal XL
Tear resistant Self adhesive SBS based
membrane cross laminated with Valeron for
below grade application
System to prevent water loss from external side
EXCELLENT
TENSILE
STRENGTH
GOOD TEAR
AND PUNCTURE
RESISTANCE
EXCELLENT
ADHESION TO
CONCRETE
SURFACE
EXCELLENT
CHEMICAL
RESISTANCE
Sealant
Termination
Bar and Fasteners
F.F.L
Roff RTM Epoxy - Tile Grout
Tile
Methodology
Tile Adhesive
Dr. Fixit Fastflex 3Coat
+ Sand Sprinkle
SURFACE PREPARATION
Clean the surface thoroughly to get rid of all contaminants. Remove all surface
imperfections and repair with a polymer modified mortar using Dr. Fixit Pidicrete
URP.
Dr.Fixit Samshield XL
Protection Board
Dr. Fixit Grout
Dr. Fixit Bathseal Tape
Pipe
Angle Fillet
Protection Screed M20
Pre Stripping
With Dr.Fixit Samshield XL
APPLICATION ON RAFT SLAB
1. Prime the surface using a Dr. Fixit Torchshield primer.
•
Apply Dr. Fixit Samshield XL 2100, SBS based membrane, on the raft slab by
providing an overlap of at least 100 mm.
•
Lay a geotextile membrane of 150 gsm as a protective layer over the Dr. Fixit
Samshield XL 2100 membrane.
•
Lay a screed of 50 mm in M 20 concrete grade.
APPLICATION ON RETAINING WALL
1. Prime the retaining wall with Dr. Fixit Torchshield Primer.
2. Apply Dr. Fixit Samshield XL 2100, starting from the base of external wall.
3. Ensure that Dr. Fixit Samshield XL 2100 is applied up to at least 300 mm
above the ground level.
4. After completion of the application, place a 4 mm thick bituminous protection
board or a 12mm thick dimpled HDPE drainage board for protection.
5. Back filling can be done, and in certain cases if the protection board is not
applied, back filling can still be done, as a cross laminated film of Dr. Fixit
Samshield XL 2100 will act as a protection layer.
1
PCC
2 Dr. Fixit Torchshield Primer
7
3 Dr. Fixit Samshield XL 2100
6
4 Geotextile Fabric
5
5 Screed
6 Dr. Fixit Waterbar SW2020
7 Protection Board
4
3
2
1
11
BELOW GROUND SWIMMING
POOL – Internal side
Dr. Fixit Fastflex
Roofseal
High performance polymer modified cementitious
coating widely used in preventing water loss from
internal walls of swimming pools
System to prevent water loss from internal side
HIGH ELASTIC
FILLER
IMPERMEABLE TO
WATER
CAN BE APPLIED
ON DAMP
SURFACES
NON-TOXIC AND
VOC FREE
Sealant
Termination
Bar and Fasteners
F.F.L
Roff RTM Epoxy - Tile Grout
Tile
Methodology
Tile Adhesive
Dr. Fixit Fastflex 3Coat
+ Sand Sprinkle
SURFACE PREPARATION
Clean the surface thoroughly to get rid of all contaminants. Remove all surface
imperfections and repair with a polymer modified mortar using Dr. Fixit Pidicrete
URP.
Dr.Fixit Samshield XL
Protection Board
Dr. Fixit Grout
Dr. Fixit Bathseal Tape
Pipe
Angle Fillet
Protection Screed M20
Pre Stripping
With Dr.Fixit Samshield XL
APPLICATION
1. A
pply the 1st coat of Dr. Fixit Fastflex maintaining the saturated surface dry
condition.
2. Embed a glass fibre mesh of 2.5mm x 2.5 mm of 50 gsm over the angle fillets
as a reinforcing strip and allow it to soak completely.
3. Immediately apply the 2nd coat to sandwich this glass fibre mesh between the
Dr. Fixit Fastflex coatings.
4. After the 2nd coat is completely dry apply a 3rd coat of Dr. Fixit Fastflex
and sprinkle coarse sand while it is still wet. This will provide the key for
subsequent tile adhesive materials.
5. Wrap all pipe inserts with Dr. Fixit Bathseal Tape to ensure a water-tight fitting.
1
Binding Concrete (PCC)
2 Dr. Fixit Torchshield Primer
6. Light fitting casings, pipes, inserts, etc., provided in the concrete raft floor and
walls are to be grouted with a non-shrink grout, Dr. Fixit Bathseal Grout.
3 Dr. Fixit Torchshield AP 4160
4 Geotextile
7. Tiles shall then be applied using tile adhesives from the ROFF range
depending upon whether they are glass mosaics, or ceramics.
5 Concrete Screed
6 Concrete Raft Slab
7 Dr. Fixit Fastflex (2 coats)
8 Dr. Fixit Fastflex
(3rd Coat with Sand)
9 Roff NSA & Roff RTM Epoxy Grout
10
Light Fixture with
Dr. Fixit Bathseal Grout
11
Pipe Opening with
Dr. Fixit Bathseal Grout
11
9
10
8
7
6
5
4
3
2
1
13
WATERPROOFING OF
OVERHEAD AND
UNDERGROUND
WATER TANKS
Dr. Fixit Fastflex
Roofseal
WATERPROOFING OF
EFFLUENT TREATMENT
PLANT
Cementitious leak free waterproofing
system for water tanks
System to prevent water loss from the internal sides of tanks
HIGH ELASTIC
FILLER
IMPERMEABLE TO
WATER
CAN BE APPLIED
ON DAMP
SURFACES
Tear resistant self adhesive SBS based
membrane cross laminated with Valeron
for effluent treatment plant
Dr. Fixit Coal tar epoxy and
Dr. Fixit Roofseal
Dr. Fixit Samshield XL 2100
Excellent waterproofing for effluent treatment plant
HIGH TENSILE
STRENGTH
NON-TOXIC AND
VOC FREE
GOOD TEAR
AND PUNCTURE
RESISTANCE
EXCELLENT
ADHESION TO
CONCRETE
SURFACE
EXCELLENT
CHEMICAL
RESISTANCE
Methodology
Methodology
SURFACE PREPARATION
SURFACE PREPARATION
Clean the surface thoroughly to get rid of all contaminants. Remove all surface
imperfections and repair with a polymer modified mortar using Dr. Fixit Pidicrete
URP.
Clean the surface thoroughly to get rid of all contaminants. Remove all surface
imperfections and repair with a polymer modified mortar using Dr. Fixit Pidicrete
URP.
APPLICATION
APPLICATION ON INTERNAL SURFACE
1. S
eal sanitary pipes entering through the walls and floor with Dr. Fixit
Bathseal Tape and grout the gaps with Dr. Fixit Bathseal Grout — a non-shrink
cementitious grout.
1. Prime the surface using Dr. Fixit Coal tar epoxy.
2. Apply the first coat of Dr. Fixit Bathseal WPC in the sunken area and extend up
to 150 mm on the walls and above the finished floor level (FFL).
3. Apply a 2nd coat of Dr. Fixit coal tar epoxy and allow it to dry completely.
3. Apply the first coat of Dr. Fixit Fastflex, maintaining the saturated surface dry
condition.
4. Embed a glass fibre mesh measuring 50 gsm over the angle fillets as a
reinforcing strip and allow it to soak completely.
5. Immediately apply the 2nd coat of Dr. Fixit Fastflex to sandwich this glass fibre
mesh between the coatings.
6. Apply the third coat of Dr. Fixit Fastflex and sprinkle coarse sand while it is still
wet. This will provide the key for subsequent plaster.
2. Apply the 1st coat of Dr. Fixit Coal tar epoxy and allow it to dry completely for
12 to 15 hrs.
4. The manhole shall be made operational after 4-7 days after full curing.
APPLICATION ON EXTERNAL SURFACE
1.
Prime the surface using Dr. Fixit Torchshield Primer.
2. Apply a Dr. Fixit Samshield XL 2100 self adhesive SBS modified membrane by
removing the silicon releasing paper on the primed surface.
3. A 4 mm bituminous protection board shall be placed over it for protection
against damage in case the land filling contains heavy boulders etc. which
may damage the membrane.
7. After application of the plaster, apply Dr. Fixit Safeguard for anti-microbial/
anti-fungal/anti-algae properties and to prevent the growth of harmful
elements in the internal area of potable water tanks.
15
Pidilite Industries Limited
DISCLAIMER The product information & application details given by the company & its agents has been provided in good faith & meant to serve only as a general
guideline during usage. Users are advised to carry out tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage
of our products. Since the correct identification of the problems, quality of other materials used and on-site workmanship are factors beyond our control, there are
no expressed or implied guarantee/ warranty as to the results obtained. The Company does not assume any liability or any consequential damage for unsatisfactory
results, arising from the use of our products.
WET AR-BK-ENG-10/14
Construction Chemicals Division
Ramkrishna Mandir Road, Post Box No. 17411
Andheri (E) Mumbai 400059 INDIA
Tel +91-22-2835 7000
• Fax +91-22-2835 7008
www.drfixit.co.in
• [email protected]