Surface Mill CATALOG No.EXm351 SURFACE MILL For superior surface finishing ø56 ø25.4 40 9.5 5 45° ø80 ø91.6 FM25.4-SFM804-40 Model No.of Insert :4, Weight :0.9kg ø80 ※ FMA25.4 or FMH25.4 is suitable arbor. in case of mount this cutter to FMH25.4, the clamping screw MBA-M12H is required. Performance Work material Cutting speed Vc (m/min) Feed Rate fz (mm/per tooth) Axial DOC ap(mm) Radial DOC ae(mm) Coolant Surface Mill S50C 200 0.2 3 75 Dry Indexable Inserts 3.18 ø10 0.2 Other manufacture 45° Insert Model CM10C1 ACP200 CM10C1 DS20 5° 1 Coating Multi-layer TiAIN & AlCrN for general steel DLC coating for Aluminum & non-ferrous 1. Inserts are available in packet of 10pcs. 2. Insert clamping screw set (S4S-T15DS) includes 10pcs of screws & wrench. RECOMMENDED CUTTING CONDITION Work Material General steel Prehardened steel Stainless steel Cast iron Aluminum, Non-ferrous Cutting Speed Vc (m/min) 150-200-250 180-240-300 160-205-250 100-175-250 500-750-1000 Feed Rate fz (mm/t) 0.10-0.20-0.30 0.10-0.25-0.40 0.15-0.23-0.30 0.15-0.23-0.30 0.15-0.23-0.30 Axial DOC ap MAX(mm) 3 4 3 4 5 Insert Grade ACP200 DS20 The table is just a reference to determine cutting conditions. It should be adjusted according to the condition of the machine tool and workpiece. CATALOG No.EXm351-1014-1 NK Square Shoulder and Face milling . PAT ARBOR TYPE CATALOG No. EXm308 FULLCUT MILL Type FCM ARBOR TYPE Cutter Dia : ø50・63・80・100 Cutter size ø100 is now available! high performance cutter for Square Shoulder & Face milling. Form FHM / FMC Indexable Insert Endmill, achieving the excellent squareness and fine surface finish. Machined by FULLCUT MILL model : FMH22-FCM63116-40 Arbor model : BBT40-FMH22-27-45 Squareness Cutting Speed V (m/min.) Feed Rate f (mm/tooth) Axial DOC Ad (mm) Radial DOC Rd (mm) øD1 ød 10μm Other manufacture 40μm L2 W 150 0.1 5 0.1 L1 Wiper cutting edge ap L Cutting Speed V (m/min.) Feed Rate f (mm/tooth) Axial DOC Ad (mm) Radial DOC Rd (mm) øD Cutter dia øD 50 63 80 100 Model FMH22-FCM50115-40 -FCM63116-40 FMH27-FCM80116-50 -FCM100116-50 ap 11 ød 22 27 øD1 47 47 60 76 250 0.2 0.1 50 Ra=0.51μm Other = manufacture Ra 1.56μm No. of Insert Insert Size L L1 L2 W 40 20 6 10.4 5 6 ARG40 ARG63 50 22 7 12.4 6 ARG80 1 : □□ mark in insert model means Nose Radius. Please select 0.2 or 0.4 Nose Radius when ordering. Weight (kg) 0.5 0.7 1.2 2.8
© Copyright 2024