Type of Presentation Start time 9:00-9:30 Design and development of Al-Cu-Fe based quasicrystals and composites (0834) 9:45-10:00 Gaurav Gautam , Anita Mohan 10:00-10:15 Quazi Arif Islam, Rajendra N. Basu 10:15-10:30 A. Mishra, S.B. Kumar, D.Roy 10:30-10:45 P. Pavan Kumar Microstructure and tensile behaviour of Al-Mg/Al3Zr in-situ composites (0603) Development of mixed ionic and electronic conductor based Ni-La2-xCaxZr2O7-δ membrane for hydrogen separation (0611) Fabrication of TiO2 dispersed hydroxyapatite nancomposite (0046) Microstructure of Ni3Al particulate reinforced AlSi10Mg matrix composites prepared by direct metal laser sintering (0476) Utilization of waste plastic and tyres as composite sleeper (0211) Shock effect on hydrothermally immersed GFRP composites (0117) In-situ intermetallic Al3Ti particles reinforced aluminium alloy composite(0405) Evaluation of erosion characteristics of glass-epoxy composites filled with red mud particles using taguchi technique (0023) Studies on combined effect of contact and noncontact type ultrasonic casting of Al-Al2O3 nano-composite (0300) 9:30-9:45 Short oral presentation followed by a poster session Title of Presentation Prof. N.K. Mukhopadhyay Department of Metallurgical Engineering, Indian Institute of Technology (BHU), Varanasi-221005, India Jayakumar Eravelly, P. Pavan Kumar,Vishwanatha H M, Sudipto Ghosh Invited talks (25 min + 5 min; each Oral Presentation (12 min + 3 min; each) Advanced Composites: Session 1 Date: 13 November, 9:00-11:00 Session Conveners: Amit Salvi, R. K. Goyal Session Chair: Amit Salvi Author name and Affiliation 10:45 onwards Pritam Banerjee, Partho Banerjee A. P. Chakraverty, U. K. Mohanty, B. B. Biswal, S. C. Mishra Rahul Guptaa, B.S.S.Daniel Sai Mani Paidi, Swami Naidu Gurugubelli Vishwanatha H. M, Jayakumar Eravelly, Sushil Patel, Sudipto Ghosh M. Jagannatham1, B.Akshaya, K.Sangavi, S.Sankaran,Prathap Haridoss Abhilasha Jain , S.J Dhoble and D.R Peshwe Preparation of pure Ni-coated Al2O3 composite powders by electroless plating (0460) Fabrication and characterization of high performance carbon nanotubes reinforced aluminum composites through spark plasma sintering (0537) Effect of PMMA on photoluminescent behavior of lanthanide doped hybrid strontium phosphate phosphor (0214) Geethalakshmi K., Shyama S. K., R. B. Tangsali, A. O. Surendranathan Hardness, wear and biocompatibility studies of UHMWPE based nano-composites (0529) Nidhi Khobragade, Binod Kumar, Debdas Roy Synthesis and characterization of graphene reinforced Cu base composites prepared by two step thermal processing methods (0174) 1 Type of Presentation Start time 13:30-14:00 Invited talks (25 min + 5 min; each Oral Presentation (12+3 minutes) Advanced Composites: Session 2 Date: 13 November, 13:30-15:30 Session Conveners: Amit Salvi, R. K. Goyal Session Chair: A. N. Tiwari Author name and Affiliation Dr.R.Ratheesh Microwave Materials Division, Centre For Materials For Electronics Technology (C-Met), Department Of Information Technology, Government Of India 14:00-14:15 Soumya Sridar, Eranezhuth Wasan Awin, Adhimoolam Kousaalya, Ravi Kumar Bijay Kumar Show, Dipak Kumar Mondal, Joydeep Maity Structure property correlation of a novel 6351 Al(Al4SiC4 + SiC) hybrid composite (0194) N.S. Karthiselva, B.. Murty, Srinivasa Rao Bakshi Narendra Kumar, Rakesh Kumar Gauta, Sunil Mohan 14:30-14:45 K. Vasanthakumar, B.S. Murty, Srinivasa Rao Bakshi 14:45-15:00 Short oral presentation followed by a poster session Flexible ceramic filled PTFE laminates for microwave circuit applications Reaction sintering and mechanical properties of TiB2 composites reinforced with carbon nanotubes and graphene nanoplatelets (0006) Effect of in-situ developed ZrB2 particles on microstructural and mechanical properties of AA5052 metal-matrix composites (0602) Effect of alumina spacers on the kinetics of TiCx formation in situ and properties of reaction spark plasma sintered Ti-TiCx-CNT composites (0109) Mechanical modeling of ZnO interfacing with UHMWPE in ZnO-UHMWPE bicomposites (0420) Development and characterization of HAp dispersed Tibased bulk metallic glass composite (0048) Development of new castable (Al-5Mg) Alloy-TiB2 metal-matrix composites (0508) Structure and mechanical properties of discrete and functionally graded SS316-IN625 material prepared by laser engineered net shaping (0542) Dielectric behaviour of precursor derived Si-Hf-C-N-O nano-composites (0101) 14:15-14:30 15:00 onwards Title of Presentation Rajeev K. Sharma and Kantesh Balani Anindya Pal, Shubhadeep Maity, Sumit Chabri, Amit Roy Chowdhury, Supriya Bera, Arijit Sinha V.M. Nimbalkar, M. Mohape, B. Bhanushali, S. G. Pandav, V. P. Deshmukh U. Savitha, G. Jagan Reddy, A. Venkata Ramana, Amol A. Gokhale And M. Sundararaman P. Sahani, B. Mishra, S. K. Karak, D. Chaira Nadendla Srinivasababu, J. Suresh Kumar, K. Vijaya Kumar Reddy Soumya Mukherjee, Anweswa Kanjilal, Siddhartha Mukherjee Anand Joy, M.Jagannatham, Prathap Haridoss Processing and characterization of SiC-B4C-Al cermet prepared by pressureless sintering and spark plasma sintering method (0285) An overview on experimental characterization of abelmoschus esculentus oval chain structured fiber reinforced polyester composites (0543) Synthesis and structural and optical characterization of variable ratio x Bismuth Ferrite-(1-X) Nickel Ferrite nanocomposite using chemical route (0601) Synthesis and characterization of electroless copper coated carbon nanotube reinforced Cu-10%Ni alloy composites prepared by spark plasma sintering (0310) S. L. Biradar, S. A. Kori, V.Auradi Wear behavior of Al-Al3Ti in-situ metal matrix composites (0668) Sheo Kumar, I. Chakrabarty Effect of electric field on the synthesis of in-situ Al(TiB2)p composites (0667) Sandan Kumar Sharma, B. V. Manoj Kumar1, Young-Wook Kim 2 Tribological behavior of SiC based Composites (0249) Type of Presentation Invited talks (25 min + 5 min; each Start time 15:30-16:00 16:00-16:15 Oral Presentation (12 min + 3 min; each) 16:15-16:30 Advanced Composites: Session 3 Date: 13 November, 15:30-17:30 Session Conveners: Amit Salvi, R. K. Goyal Session Chair: N. K. Mukhopadhyay Author name and Affiliation Dr. A N Tiwari Dept. Of Metallurgical Engineering & Materials Science, Indian Institute Of Technology Bombay,Mumbai-400076 R. K. Goyal, Rishika Sulakhe, Roshan Gadve, Archana Gupta Prafulla Kumar Mallik, Bikramjit Basu, Kantesh Balani 16:30-16:45 S.C.Ram, K.Chattopadyay, I.Chakrabar 16:45-17:00 Ariharan.S, N. Balaji, S.T. Aruna, Kantesh Balani 17:00-17:30 Short oral presentation followed by a poster session Honey Garg, Dr. J.D.Sharma A. A. Thanki, J. Thanki, R. K. Goyal Sushant D. Sale, R. K. Goyal Unmesh Vibhute, R. K. Goyal G. K Gupta, R.P Singh, Ajay Shukla Monu Kumar, O.P Modi Title of Presentation Aluminum matrix micro- and nano-composites by powder metallurgy Study on polymer matrix micro- and nano-composites for EMI shielding (0759) Novel multistage spark plasma sintered HA-CaTiO3 composites for biomedical application (0646) A review on mechanical and wear behavior of Al-(Mg2Si)P functionally graded in-situ composites synthesized by centrifugal casting method (0408) Phase retention of Ysz In Plasma Sprayed YSZ-CNT reinforced Al2O3 matrix composites for thermal barrier coating (0821) Wood plastic composite – challenges for processing and mechanical properties (0723) A study on effect of BaTiO3 on the electrical properties of polymeric nano-composites (0759) Preparation and properties of Poly (Phenylene Sulfide)/clay nano-composites (0759) Polymer/Cobalt composites for electronic applications (0759) Age hardening behavior of Al2014-TiB2 composite prepared by powder metallurgy route (0578) Preparation of Fe-Aluminide reinforced in-situ aluminium by two stem thermal processing matrix composites (0811) S.Hembram, B.N.Rai, D.Roy B.Mallik, D.Roy K.N.Pande, Anupama Kumar, D.R.Peshwe P. Christy Roshini, Baldev Raj, K.R. Ravi Synthesis and characterization of Ti-Aluminide reinforced in situ metal matrix composites by spark plasma sintering (0812) Effect of cryogenic treatment on adhesion phenomenon at interface in Wollastonite reinforced PBT composites (0795) Ultrasonic assisted fabrication of graphite reinforced aluminium matrix nano-composites (0686) Ajoy Kumar Pandey and Koushik Biswas Ageing, tribological properties and biomineralization of alumina and zirconia based bioceramics (0830) R.Vinodhini, R. Suresh Kumar, Ashutosh S. Gandhi Oxidation studies of MoSi2-reinforced SiC composite in combustion environment (0756) Jayakrishnan Nampoothiri, B Nagasivamuni Vijaykumar Hiremath, V Auradi, S T Dundur, & S A Kori 3 Synthesis and characterization of in-situ A356/TiB2 nanocomposites (0695) Experimental Studies on Mechanical properties and Machinability of 6061Al reinforced with B4C particulate MMCs produced via Stir casting method (0786)