1. business and industrial
2. metals

15”Marvel High Efficiency
Single Zone Wine Cellar
Model # ML15WS****
•D
ynamic Cooling Technology™ delivers rapid cooldown and the
industry’s best temperature stability
•M
ARVEL Intuit™ Integrated Controls provide precise temperature
management from 40°F to 65°F
•V
ibration Neutralization System™ protects
wine from agitation
• Two-stage, soft white theatre-style LED lighting and midnight black
interior
• Thermal-efficient cabinet ensures optimum food preservation and
energy efficiency while maximizing capacity
• Tinted, UV-resistant dual pane glass door protects wine from
damaging ultra-violet light
• Natural maple shelf fronts are stainable to match cabinetry
• Three-quarter extension roller-glide shelf system prevents jarring
• Close Door Assist System™ gently and automatically closes door
• Panel overlay option features soft-close integrated hinge for a truly
flush fit with cabinetry
• Audible and visual alarms signal when door is left ajar to protect wine
integrity and energy use
• Vacation/Sabbath mode conserves energy during times when the
unit is not in use
• Sleek stainless steel door and
designer handle
• Height adjustment up to 1” with
leveling legs
• Filler kit available for 18” wide opening,
see page 58
• Up to 2x more efficient than leading competitors
• 4” black adjustable toe kick
•1
-year warranty
Ordering Details
Stainless Frame Glass Door,
Right Hinge
ML15WSG1RS
Stainless Frame Glass Door,
Left Hinge
ML15WSG1LS
Smooth Black Frame Glass Door,
Right Hinge
ML15WSG1RB
Smooth Black Frame Glass Door,
Left Hinge
ML15WSG1LB
Panel Overlay Frame Glass Door,
Integrated Right Hinge
ML15WSF2RP
Panel Overlay Frame Glass Door,
Integrated Left Hinge
ML15WSF2LP
Solid Panel Overlay Ready Door,
Integrated Right Hinge
ML15WSP2RP
Solid Panel Overlay Ready Door,
Integrated Left Hinge
ML15WSP2LP
No panel installation kit required.
Storage Capacity
Up to 24 bottles total
Storage Configuration
(6) 4-bottle roller-glide wine racks
Product Dimensions
14⅞” W x 33¾” minimum H x 25⅝” D (including handle)
Finish/Door Options
Stainless Steel
Black
Wood Overlay
(Panel Ready)
Forced
Air Fan
"A"
Evaporator
Plate
Return
Air Intake
"B"
Front
"C"
15" Rough-In Dimensions
"A"
PRODUCT DIMENSIONS
15"
(38.1 cm)
"B"
"C"
**34" to 35"
(86.4 to 88.9 cm)
24”
(61 cm)
PRODUCT DATA
MODEL
ML15WSG
ELECTRICAL
REQUIREMENTS #
PRODUCT
WEIGHT
115V/60Hz/15A
105 lbs
(47.7 kg)
105 lbs
(47.7 kg)
ML15WS(P) or (F) Cabinet
115V/60Hz/15A
Dimensions
"D"
ML24W*G
14 7⁄8”
"E"
115V/60Hz/15A
33 3⁄4” to 34 3⁄4”
ML24W*(P)
(60.7 cm)or (F) (85.7 115V/60Hz/15A
to 88.3 cm)
Forced
Air Fan
Evaporator
Plate
140 lbs
"F"
(63.6 kg)
23 23⁄32”
140 lbs
(60.2
cm)
(63.6
kg)
“G”
“H”
“J”
25 21⁄32”
(65.2 cm)
37 13⁄32”
(95 cm)
16 11⁄16”
(42.4 cm)
Return
Air Intake
"J"
Front
Side
"H"
"D"
"G"
Dynamic Cooling Technology™
delivers rapid cool down
and the industry’s best
temperature stability
"E"
The distinctive Marvel design features a
1"thermal-efficient cabinet and door combined
(2.5
cm)Dynamic Cooling Technology™ for
with
Figure 8
211⁄2"
(54.6cm)
superior temperature stability, faster cooling
times and speedy temperature recovery even
with high frequency.
"F"
* Depth
dimension of rough-in opening
may vary depend- Control Type
Width
14 ⅞"
Intuit™
Finishes
APPLIES TO THE FOLLOWING
MARVEL MODELS
ing on each individual installation. To recess entire door "F"
Vacation /
Interior Finish
Black
Temperature
Range
40° - 65° F
ML15WS
ML24WS
dimension plus 1" (2.5 cm) for thickness of power cord plug
Sabbath Mode
ML24WD
Lock
NA
is required.
Capacity
Up to 24 wine bottles
Electrical Requirements
** Minimum rough-in opening required is to be larger than
Shelving System
Side mount - tray
Length of Power Cord
the adjusted height of the cabinet.
Shelf Fronts
Black painted maple
Product Dimensions
# A grounded 15 amp dedicated circuit is required. Follow
Depth to Front of Door
Other Storage
all local
building codes when installingNAelectrical and appliDepth to Handle
ance.
Interior Lighting
2 White LED Pods
Toe Grill Finish
Black
Hinge
Handle
Classic Hinge
!
Designer
WARNING
120V / 60Hz / 15A
5'
CSA
ENERGY STAR
Certified
NA
23 23/32"
26 ¼"
37 1/16"
Shipping Weight
125 lbs
Finishes Key
SS = Stainless Steel
B =Black
Floor mount Anti-tip Bracket must be installed for freestanding applications. Not required for built in applications.O= Overlay
9
Yes
Agency Approvals
14 ⅞" W x 33 ¾" H x 21 ½" D
Depth with door at 90°
SS, B, O
DOOR PANEL
INSTALLATION
Overlay
Panels
OVERLAY DOOR PANEL INSTALLATION
Figure 13
Left Hand Hinged Door
15" (38.1 cm) wide appliance
y panel
with top
side of
door.
Clearance for
screw head,
Weight of overlay door panel must not
4 places
exceed 15 pounds (6.8 kg) for a solid
door model or 10 pounds (4.5 kg) for a
glass door model.
Figure 15
Right Hand Hinged Door
15" (38.1 cm) wide appliance
Clearance
for hinge
2 places
143⁄4"
(37.5 cm)
ay panel to
ntered on
of door.
1
⁄4" (6 mm)
Deep
31⁄8"
(7.9 cm)
1
13⁄4"
(4.4 cm)
1 ⁄4"
(4.4 cm)
3
233⁄4"
(60.3 cm)
1" (25.4 mm) diameter
counter bore 1⁄4" (6 mm)
deep 4 places.
3 1 ⁄8 "
(7.9 cm)
1
⁄4"
(6 mm)
Deep
13⁄4"
(4.4 cm)
14"
(35.6 cm)
47⁄8"
(12.4 cm)
13⁄16"
(3 cm)
13⁄16"
(3 cm)
3 ⁄32"
(9.7 cm)
31⁄8"
(7.9 cm)
327⁄32"
(9.8 cm)
1
31⁄8"
(7.9 cm)
Minimum
16
(4.3 cm)
2"
(5.1 cm)
CAUTION
#10 Wood Screw
Hardwood
1
Softwood
7
⁄8" (3.2 mm) Diameter. Pilot Hole
2"
(5.1 cm)
311⁄16"
(9.4 cm)
Step 4: Assemble the panel to the door
The preferred method of attaching the panel to the door
is to clamp the panel to the door so it cannot move while
drilling the screw pilot holes. Use bar clamps or "C" clamps
with pads on the clamping surfaces that will not mar the
panel or the door. The custom overlay panel should be
flush with the top of the door and centered along the width
of the door. See Figure 12a. Drill holes through the gasket
DOOR PANEL
INSTALLATION
extrusion
using the 10 holes as pilot holes. Use the drill
size from the chart in Table "C", being careful not to drill
through the front surface of the panel, drill no deeper than
1
⁄2" (12.7 mm) deep. If the overlay panel is thinner than
5
⁄8" (16 mm) thick shorter screws will have to be obtained.
earance for
Fasten the! panel to the door with the 10 screws provided
rew head,
in the literature pack. (See Figure 21). Remove the clamps
places
Weight
of overlay
doorinpanel
must not
exceed
15
and replace
the gasket
the gasket
extrusion
channels
of
pounds
kg) force
for a may
solidbedoor
model
10the
pounds
the door.(6.8
Some
required
to or
seat
gasket
(4.5
a glassBe
door
intokg)
the for
channels.
suremodel.
the gasket corners are seated
properly.
CAUTION
Hardwood
1
Softwood
7
⁄8" (3.2 mm) Diameter. Pilot Hole
⁄64 (2.8 mm) Diameter. Pilot Hole
Table C
#10 x 1/2"
screw
Step 4: Assemble the panel to the door
Figure
21
The preferred method of attaching the panel to
the door
Clearance for
screw head,
4 places
do
o5r
1 ⁄32"
(2.9 cm)
1 ⁄2 "
(3.8 cm)
typical
1
111⁄16"
(4.3 cm)
14"
(35.6 cm)
3 ⁄8 "
(7.9 cm)
1
Material Type
41⁄8"
(10.5 cm)
Minimum
47⁄8"
(12.4 cm)
13⁄16"
(3 cm)
Figure 11
327⁄32"
(9.8 cm)
Overlay panel
flush with top
and side of
door.
1
⁄4" (6 mm)
radius is
permissible
31⁄8"
(7.9 cm)
1
Softwood
7
8
1 1 ⁄2 "
(3.8 cm)
typical
Holes in
gasket
retainer.
Table C
1" (2.5 cm) diameter
x 1⁄4" (6 mm) deep
4 places
311⁄16"
(9.4 cm)
31⁄8"
(7.9 cm)
Overlay panel to
be centered on
4 ⁄ "width of door.
8
1" (2.5 cm) diameter
x 1⁄4" (6 mm) deep
4 places
Figure 20
Right Hand Hinged Door
24" (61 cm) wide appliance
311⁄16"
(9.4 cm)
The preferred method of attaching
Figure 18the panel to the door
is to clamp the panel
to Hand
the door
so it cannot
Left
Hinged
Door move while
drilling the screw24"
pilot(61
holes.
clamps or "C" clamps
cm) Use
widebar
appliance
with
pads
on
the
clamping
surfaces
that
will not mar the
16
panel or the door. The custom overlay panel should be
flush with the top of the door and centered along the width
PANEL INSTALLATION
of the door. See Figure 12a. Drill holes through the gasket
extrusion using the 10 holes as pilot holes. Use the drill
size from the chart in Table "C", being careful not to drill
through the front surface of the panel, drill no deeper than
1
⁄2" (12.7 mm)
deep. for
If the overlay panel is thinner than
Clearance
5
⁄8" (16 mm)screw
thick head,
shorter screws will have to be obtained.
Fasten the panel
to the door with the 10 screws provided
4 places
in the literature pack. (See Figure 21). Remove the clamps
and replace the gasket in the gasket extrusion channels of
the door. Some force may be required to seat the gasket
13 Be sure the gasket corners are seated
into theFigure
channels.
Left
Hand Hinged Door
properly.
15" (38.1 cm) wide appliance
(10.5 cm)
2"
(5.1 cm)
2"
Step 4: Assemble the panel to the door
Clearance
for hinge
2 places
#10 x 1/2"
screw
15⁄32"
(2.9 cm)
1
⁄8" (3.2 mm) Diameter. Pilot Hole
⁄64 (2.8 mm) Diameter.
(5.1 cm) Pilot Hole
3011⁄32"
(77.1 cm)
This side
facing
interior
3011⁄32"
#10 Wood Screw
Hardwood
4⁄"
1
Press and hold down this
tab on the wire connector
and pull the connector apart.
13⁄4"
(4.4 cm)
facing
interior
(10.5 cm)
233⁄4"
(60.3 cm)
⁄4"
(6 mm)
Deep
CAUTION
!
111⁄16"
(4.3 cm)
OVERLAY DOOR
1
31⁄8"
(7.9 cm)
cm)
Weight of overlay door panel must not (77.1
exceed
15
pounds (6.8 kg) for a solid door model or 10 pounds
This door
side model.
(4.5 kg) for a glass
15⁄32"
(2.9 cm)
Right Hand Hinged Door
24" (61 cm) wide appliance
Figure 12a
#10 Wood Screw
3 1 ⁄8 "
(7.9 cm)
31⁄8"
(7.9 cm)
Minimum
Figure 16
Right Hand Hinged Door
15" (38.1 Figure
cm) wide
19 appliance
⁄64 (2.8 mm) Diameter. Pilot Hole
Table C
Material Type
of
This side
facing
interior
Figure 14
Left Hand Hinged Door
anel to the
!
15" (38.1 cm) Wide Appliance
learance for
crew head, 15
Weight
of
overlay
door panel must not exceed 15
places
pounds (6.8 kg) for a solid door model or 10 pounds
(4.5 kg) for a glass door model.
Material Type
To
p
bottom
311⁄16"
(9.4 cm)
1 ⁄ "
PANEL INSTALLATION
l
Clearance
Hinge side of door
1 1 ⁄2 "
(3.8 cm)
typical
permissible
31⁄8"for hinge
(7.9 cm)
at top and
Minimum
This side
facing
interior
4 1 ⁄8 "
(10.5 cm)
Minimum
11
30 ⁄32"
(77.1 cm)
⁄4" (6 mm)
radius is
OVERLAY DOOR PANEL INSTALLATION
⁄4" (6 mm)
radius is
permissible
1
11
Hinge side of door
3011⁄32"
(77.1 cm)
31⁄8"
(7.9 cm)
Minimum
15⁄32"
(2.9 cm)
15⁄32"
(2.9 cm)
Clearance
for hinge
at top and
bottom
27
⁄4" (6 mm)
radius is
permissible
31⁄8"
(7.9 cm)
or
do
Figure 17
Left Hand Hinged Door
24" (61 cm) wide appliance
1
d 15
DOOR
pounds
of
143⁄4"
(37.5 cm)
⁄4" (6 mm)
Deep
47⁄8"
5"
(12.4 cm) (12.7 cm)
327⁄32"
(9.7 cm)
sket
ng at a
p and pull
e door.
p
To
Clearance
for hinge
2 places
1" (25.4 mm) diameter
counter bore 1⁄4" (6.4mm)
5"
47⁄8"
deep 4 places.
(12.7 cm) (12.4 cm)
13⁄16"
(3 cm)
Clearance for
screw head,
4 places
CAUTION
!
Hinge side of door
To
Hinge side of door
rt.
or
do
Hinge side of door
f
po
Clearance for
screw head,
4 places
143⁄4"
(37.5 cm)
1 ⁄16"
(4.3 cm)
11
1
⁄4" (6 mm)
Deep
Figure
1" (25.4 mm) diameter
counter bore 1⁄4" (6.4mm)
5"
47⁄8"
deep 4 places.
(12.7 cm) (12.4 cm)
1 1 ⁄2 "
(3.8 cm)
typical
13⁄16"
(3 cm)
3 1 ⁄8 "
(7.9 cm)
13⁄4"
(4.4 cm)
327⁄32"
(9.7 cm)
⁄ " (6 mm)
For comprehensive installation
instructions,
17
radius is
please visit www.marvelrefrigeration.com
permissible
1
Magnetic Gasket
4
3011⁄32"
(77.1 cm)
21