BY
COMMERCIAL LP
Power Equipment Brochure
FUEL
POWERED
2015
CLEAN
GRAVELY® LP Series
Throughout the history of Gravely, we have focused on developing products
specifically for the needs of our commercial customers. The insightful
engineering and quality found in our gasoline-powered equipment is
expanding to a complete line of products powered by Liquefied Petroleum
Gas, more familiarly known as propane or LP.
Our LP lineup is engineered and built by the same experts who created
the Pro-Turn, Pro-Stance, and Pro-Walk gasoline models, which means
they come with the same features our customers demand. Not only
is design integrity maintained from platform to platform, but LP
offers numerous user benefits. For starters, LP fuel is 20 to 30
percent less expensive than current gasoline prices, and it burns
cleaner – a HUGE draw to customers who hire lawn care professionals
based on their environmental record.
full lineup
Gravely understands that different contractors have different needs, which is why our factory built 2015 LP lineup includes Pro-Turn 400,
and the NEW Pro-Stance 52 LP and Pro-Walk 48 LP models. Gravely is giving your business huge fuel $avings . As if that wasn’t enough,
these NEW units come equiped with Kohler® EFI engines that provide unmatched efficiency, leading to a reduced “payback” time.
ULTIMATE SAVINGS
ULTIMATE CONVENIENCE
Propane fuel costs less per gallon than gasoline and
requires less engine maintenance, saving money
year after year. Propane is a green burning,
environmentally friendly fuel alternative that
is not considered a greenhouse gas.
COMMERCIALDUTY
DUTY
COMMERCIAL
TOUGH
TOUGH
POWERED BY
Lawn and garden propane cylinders are specifically
designed for mowers indicated by the green ring
at the top. These tanks are left-hand threaded to
ensure you always have the correct tank for the job.
THE PRO-TURN
CLEAN
FUEL 400
ULTIMATE RUN TIME
Gravely Pro-Turn 400 LP mowers have two 33.5 lb.
propane tanks providing longer run time and enough
fuel to complete large jobs.
Check out the list below for more reasons Gravely’s LP products should be part of
your fleet:
•LP-powered engines last longer because the fuel burns cleaner
•No spilling during fill-ups (unlike gasoline)
•Less chance of supply shortages due to theft (employees can’t “borrow” LP to run
their trucks)
•97% of propane is produced in the United States
•Ethanol is removed from the equation, reducing problems and repairs after storage
•All Gravely LP equipment is compatible with 33.5 lb. tanks, for long run-time
LP conversion
Looking for something different than what we produce in our factory? Our authorized LP conversion dealers
are trained and certified to convert the fuel source on any Kawasaki engine from gasoline to LP. The customcrafted tank brackets on these conversion kits are the same parts installed on factory-built units to ensure
your converted unit maintains its professional look.
When profits fly out the window from increasing maintenance and fuel expenses,
it makes sense to invest in a unit that cuts costs on both fronts. Building an
LP-powered fleet also makes your pocketbook eligible for up to $1000
per-unit incentive for each new LP unit purchased, courtesy of The Propane
Education Resource Council (PERC). To learn more about the PERC program
and the benefits of propane, visit: www.propane.com
WWW.gravely.com
SPECIFICATIONS
PRO-TURN 400
460
MODEL NUMBER
engine
horsepower
displacement (cc)
drive system
fuel capacity - gallons
(liters)
ground speed
(approx. mph )
(forward/reverse)
starter
472
992237
992243
K awasaki® FX850LPG
heavy-duty air
K awasaki® FX850LPG
heavy-duty air
cleaner
cleaner
27
27
852
852
Hydro-Gear®
ZT-5400 Integrated
pump/motor
Hydro-Gear®
ZT-5400 Integrated
pump/motor
Twin 33.5lb tanks
(not included)
Twin 33.5lb tanks
(not included)
13 mph/6 mph
13 mph/6 mph
Electric
Electric
7 ga steel with
.25 inch spindle
7 ga steel with
.25 inch spindle
reinforcement
reinforcement
Welded
Welded
MODEL NUMBER
engine
horsepower
displacement (cc)
drive system
deck construction
number of spindles
blade tip speed (fpm)
spindle housing material
spindle shaft
spindle bearings
3
3
18,000
18,000
Cast Iron
Cast Iron
Steel
Steel
Ball Bearing
starter
deck engagement
deck lift system
Foot Operated
Foot Operated
60"
72"
1.0-5.5"
1.0-5.5"
19
19
wheels
front axle
front
rear
Fixed with greaseable Fixed with greaseable
caster fork tubes
Smooth 15 x 6-6
semi-pneumatic
Turf 24 x 12-12
Radial
caster fork tubes
Smooth 15 x 6-6
semi-pneumatic
Turf 24 x 12-12
Radial
features
Air ride suspension
Air ride suspension
and seat isolators
and seat isolators
foot plate
Fully Isolated
Fully Isolated
fuel gauge
Standard
Standard
hour meter
Standard
Standard
foldable rops
Standard
Standard
machine dimension
Standard
Standard
1579
1633
length
80"
88"
width without chute
63"
75"
75.25"
87.25"
70/47.75"
70/47.75"
3 Year Limited
Commercial
3 Year Limited
Commercial
Limited Lifetime Deck
Shell & Frame
Limited Lifetime Deck
Shell & Frame
3 Year Limited
Spindle
3 Year Limited
Spindle
seat
weight (lbs) w/o fuel
width with chute
height w/ rops ext/down
warranty
unit
deck shell & frame
spindles
horsepower
22
displacement (cc)
747
24
747
Hydro-Gear®
ZT-3400 Integrated
pump/motor
Electric
7 ga steel with
.25 inch spindle
Welded
number of spindles
3
spindle housing material
spindle shaft
spindle bearings
deck drive
attachments / accesories
*3 Bucket Powered Bagger Kit, *Dump From Seat Bagger, *PECO
Hopper Bagger, Mulching Kit, Discharge Cover Kit, Trailer Hitch Kit,
Headlight Kit, Bar Style Tire Kit, Hub Cap Set, Powered Deck Lift,
Operator Controlled Discharge Chute
18,000
Cast Iron
Steel
number of spindles
blade tip speed (fpm)
spindle housing material
spindle shaft
spindle bearings
deck drive
7 ga
Welded
3
18,220
Aluminum
1" Steel
1" Sealed
Belt
Manual
Manual
14
Fixed with greasable
caster fork tubes
front
13x6.50-6
semi-pneumatic
rear
20x10.50-8
features
foot plate
Isolated
fuel gauge
Standard
hour meter w/
maintenance reminder
Standard
machine dimension
1108 w/ full LP tank
length (transport)
61"
width without chute
55.5"
width w/ chute
68"
height (inches)
48
warranty
48
spindles
deck contstruction
deck lift system
wheels
deck shell & frame
Electric
deck
Belt
Ogura GT1A
52"
unit
starter
7 mph / 3 mph
Ball Bearing
1.5" - 5.0"
weight (lbs)
ground speed
(approx. mph)
(forward/reverse)
10cc Pumps and 12ci
Motors
20lb or 33.5lb
tank (not included)
Electric Clutch
cutting height
front axle
fuel capacity
gallons (liters)
Kohler® PCV680 EFI LP
deck engagement
cutting width
cutting positions
drive system
deck material
deck construction
blade tip speed (fpm)
988170
air cleaner
deck
deck material
MODEL NUMBER
engine
9 mph / 4 mph
deck lift system
Belt
cutting positions
994122
kohler® efi
PCV740 heavy duty
ground speed
(approx. mph)
(forward/reverse)
Ball Bearing
Ogura® GT3.5 250
ft/lb
cutting heights
48HE PG
33.5lb tank
(not included)
deck engagement
Belt
cutting width
52FL
reinforcement
Ogura® GT3.5 250
ft/lb
deck drive
PRO-WALK
fuel capacity gallons (liters)
deck
deck material
PRO-STANCE
cutting width
cutting heights
cutting positions
48"
1.5" - 5.0"
15
wheels
front axle
Swivel
front
9 x 3.5
rear
16 x 7.5
machine dimension
weight (lbs.)
length (inches)
765 w/ full 33.5#
LP tank
72"
width (inches)
48.5"
height (inches)
44.5"
warranty
unit
2 Year Limited Commercial
deck shell & frame
Limited Lifetime Deck
Shell & Frame
spindles
2 Year Limited Spindle
attachments/accessories
Two-wheel sulky, One-wheel sulky, grass collector,
operator controlled discharge chute, grass collector
attachment bracket
2 Year Limited
Commercial
Limited Lifetime Deck
Shell & Frame
3 Year Limited
Spindle
attachments/accessories
Mulching Kit, Operator Controlled Discharge
Chute, Grass Collector Attachment Bracket
Special financing programs are available
through Sheffield and Yard Installment.
Contact your local dealer for more details.
©2015 Copyright Ariens Company. All rights reserved. ® Registered trademark and ™ trademark of Ariens Company. Briggs &
Stratton, Hydro-Gear, Kawasaki and Kohler are registered trademarks of their respective companies. The engine horsepower
information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower
will be less. Visit www.gravely.com for a complete listing of engine manufacturer power rating information. Product features
and specifications are subject to change without notice. Photos are a representation of product; the actual product may differ.
WWW.gravely.com