1. No category

HOW TO FIX COMMON PRINTING
ISSUE IN DELL LASER
PRINTER?
▪ Facing common printing issues on your Dell
laser printer and don’t know how to fix it?
Then you have opened the right page as here
Dell Printer Tech Support team has provided
some common troubleshooting steps in order
to fix printing problems faced by you in your
printing machine. Just go through the below
mentioned procedure appropriately.
▪ • Firstly, re-connect both ends of the cable
going from your computer to your printing
device if linked by a USB cable.
▪ • After that, restart your system and then you
have to turn off your printer.
▪ • Then unplug the power cord from the A/C
outlet and then wait for at least 30 seconds.
▪ • After that connect the power cable back to
A/C outlet or surge protector.
▪ • Then you have to turn your print device
back on and print a test page from your
machine.
▪ • Then you have to ensure that the preferred
printer is set as the default printing device.
▪ • Now for networked printers, it will be
connected through a wireless or wired
network and not with USB cable. Make sure
that the internet connection is turned on your
system and the printer portal and IP address
are correctly entered. To check all this, you
have to just click on the link below that
corresponds to the system that is installed on
your computer.
▪ • After that, you have to run the machine
troubleshoot to analyze and routinely fix any
technical glitches.
▪ • Then print a test page. For this click on the
link below, that corresponds to the operating
system which is installed on your PC.
▪ • Also, perform a system re-establish to make
it effective.
▪ For more assistance, you can get in touch with
our experts by calling us at our toll-free Dell
Printer Support Number +61-283173391 and
get complete assistance from our experts and
get all your doubts cleared instantly.
Contact Us:▪ If You have any query regarding printer just
make a call at Dell Printer Support Australia
▪ Helpline Number +61-283173391.
▪ For more info visit original source
▪ https://bit.ly/2zJDd42