QUADRI
™
1.800.350.4127
www.BNind.com
B+ N INDU S T RIES, INC.
800 350 4127
1
322007
322007
The 4" Frames
4" Frames are graphic holders that
allow customer-provided graphics up
to 1/4" to be slid into an opening in
one of the sides. The Frames can be
ceiling-suspended, installed on the wall,
or simply leaned against the wall to be
easily re-positioned. For all mounting
applications and hardware, see page
11. The frames are satin anodized
aluminum, and have a profile of
4" x 7/8".
For freestanding applications, the
Frames can be combined with
bases. These bases can be322007
further
accessorized with hardware to display
products.
322007
322008
322008
The 4" Frames Freestanding 4' x 8'
322009
322009
4' x 8' Vertical
Satin anodized aluminum.
Overall size: 55 1/4" x 103 1/4". Image size:
48" x 96" x 1/4" max thickness, graphics slip
in from the top.
322007 $ 233.00
2' x 8' Vertical
Satin anodized aluminum.
Overall size: 31 1/4" x 103 1/4". Image size:
24" x 96" x 1/4" max thickness, graphics slip
in from the top.
322008 $ 208.00
322007
322008
4' x 8' Vertical
322009
2' x 8'
Vertical
4' x 8' Horizontal
Satin anodized aluminum.
Overall size: 55 1/4" x 103 1/4". Image size:
48" x 96" x 1/4" max thickness, graphics slip
in from the side.
322009 $ 233.00
322008
2' x 8' Horizontal
Satin anodized aluminum.
Overall size: 31 1/4" x 103 1/4". Image size:
322007
24" x 96" x 1/4" max thickness, graphics slip
in from the side.
322010
322008$ 208.00
4' x 4' Square
Satin anodized aluminum.
Overall size: 55 1/4" x 55 1/4". Image size:
48" x 48" x 1/4" max thickness, graphics slip
in from the side.
322011 $ 159.00
2' x 2' Square
Satin anodized aluminum.
Overall size: 31 1/4" x 31 1/4". Image size:
24" x 24" x 1/4" max thickness, graphics slip
in from the side.
322012 $ 114.00
322008
322012
322012
322009
322010
322010
322009
322009
4' x 8' Horizontal
322011
322012
322010
322011
2' x 8' Horizontal
322012
322011
322010
322011
322012
322012
322010
322010
4' x 4' Square
2
www.B N ind.co m
322011
322011
2' x 2'
Square
4' x 8' Vertical Frame
with Separate Base
and Angled Supports
Frame: satin anodized
aluminum.
Base: powder coated
steel. Base sits 4"
away from frame.
3 holes per side
in bases for Pole
Accessories
Overall size: 55
1/4"w x 103 1/4"h x
32 3/8"d. Image size:
48" x 96" x 1/4" max
thickness, graphics
slip in from the top.
322028 $ 670.00
4' x 8' Vertical Frame
with Single Base and
Gusset Supports
Frame: satin anodized
aluminum.
Base: powder coated
steel. Base sits
underneath frame. 3
holes per side in base
for Pole Accessories
Overall size: 55
1/4"w x 103 1/4"h
x 24"d. Image size:
48" x 96" x 1/4" max
thickness, graphics
slip in from the top.
322029 $ 526.00
4' x 8' Vertical Frame
with Separate Gusset
Supports
Frame: satin
anodized aluminum.
Base: powder
coated steel.
Overall size: 55
1/4"w x 103 1/4"h
x 20"d. Image size:
48" x 96" x 1/4" max
thickness, graphics
slip in from the top.
322030 $ 420.00
800 350 4127
3
4" Freestanding Installation Ideas
(1) 4" x 4' x 8' Vertical
Frame, Separate Base
and Angled Supports,
(2) Telescoping Poles
with Square Trays,
(1) Telescoping Pole
with Mannequin.
(1) 4" x 4' x 8' Vertical
Frame, Separate Base
and Angled Supports,
(1) Telescoping Pole with
Clear Acrylic Box.
4
(1) 4" x 4' x 8' Vertical
Frame, Separate Base
and Angled Supports,
(2) Telescoping Poles
with Mannequins.
(1) 4" x 4' x 8' Vertical
Frame, Separate Base
and Angled Supports,
(3) Telescoping Poles,
anodized aluminum
Round Shelves.
(1) 4" x 4' x 8' Vertical
Frame, Single Base and
Gusset Supports,
(2) Telescoping Poles
with Mannequins,
(1) Telescoping Pole with
Round Acrylic Shelf.
(1) 4" x 4' x 8' Vertical
Frame, Single Base and
Gusset Supports,
(6) Telescoping Poles
with Clear Acrylic Boxes
(three on each side).
(1) 4" x 4' x 8' Vertical
Frame, Single Base and
Gusset Supports,
(2) Telescoping Poles
with Wood Square
Shelves, (1) Telescoping
Pole with Graphic
Holder, (1) customerprovided graphic.
(1) 4" x 4' x 8' Vertical
Frame, Single Base and
Gusset Supports,
(4) Telescoping Poles
with (2) Horizontal Bars
for 4' wide Freestanding
Frames (installed on front
and back).
(1) 4" x 4' x 8' Vertical
Frame, Single Base and
Gusset Supports,
(3) Telescoping Poles
with Graphic Holders,
(3) customer-provided
graphics.
(1) 4" x 4' x 8' Vertical
Frame, Single Base and
Gusset Supports,
(2) Telescoping Poles
with Graphic Holders,
(1) Telescoping Pole with
Mannequin,
(2) customer provided
graphics
www.B N ind.co m
800 350 4127
(1) 4" x 4' x 8' Vertical
Frame, Single Base and
Gusset Supports,
(2) Telescoping Poles
with Graphic Holders,
(1) customer-provided
graphic.
5
The 1" Frames
322019
322019
1" Frames are graphic holders that
allow customer-provided graphics up
to 1/4" to be slid into an opening in
one of the sides. The Frames can be
ceiling-suspended, installed on the wall,
or simply leaned against the wall to be
easily re-positioned. For all mounting
applications and hardware, see page
11. The frames are satin anodized
aluminum, and have a profile of
1" x 7/8".
For freestanding applications, the
Frames can be combined with
bases. These bases can be further
accessorized with hardware to display
products.
322019
322019
4' x 8' Vertical
Satin anodized aluminum.
Overall size: 49 1/4" x 97 1/4". Image size:
48" x 96" x 1/4" max thickness, graphics slip
in on the top.
322019 $ 109.00
2' x 8' Vertical
Satin anodized aluminum.
Overall size: 25 1/4" x 97 1/4". Image size:
24" x 96" x 1/4" max thickness, graphics slip
in on the top.
322020 $ 94.00
322020
4' x 4' Square
Satin anodized aluminum.
Overall size: 49 1/4" x 49 1/4". Image size:
48" x 48" x 1/4" max thickness graphics slip
in on the side.
322023 $ 81.00
4' x 8' Vertical Frame
with Separated Base
and Angled Supports
Frame: satin anodized
aluminum.
Base: powder coated
steel. Base sits 4"
away from frame.
3 holes per side
322021
in bases for Pole
Accessories
322019
322020
4' x 8' Vertical
2' x 8'
Vertical
4' x 8' Horizontal
Satin anodized aluminum.
Overall size: 49 1/4" x 97 1/4". Image size:
48" x 96" x 1/4" max thickness, graphics slip
in on the side.
322021 $ 109.00
2' x 8' Horizontal
Satin anodized aluminum.
Overall size: 25 322019
1/4" x 97 1/4". Image size:
24" x 96" x 1/4" max thickness, graphics slip
in on the side.
322021
322022 $ 94.00 322020
The 1" Frames Freestanding 4' x 8'
322021
322021
322020
322020
Overall size: 49
1/4"w x 97 1/4"h x
32 3/8"d. Image size:
48" x 96" x 1/4" max
thickness, graphics
slip in from the top.
322031 $ 445.00
322021
322020 322021
322024
322024
322022
322022
4' x 8' Horizontal
322024
4' x 8' Vertical Frame
with Separate Gusset
Supports
Frame: satin anodized
aluminum.
Base: powder coated
steel.
322022
2' x 8' Horizontal
322023
322022
6
322022
4' x 8' Vertical Frame
with Single
Base and
322023
Gusset Supports
322023
Frame: satin anodized
aluminum.
Base: powder coated
steel. Base sits
underneath frame. 3
holes per side in base
for Pole Accessories
Overall size: 49
1/4"w x 97 1/4"h
x 24"d. Image size:
322023
48" x 96" x 1/4" max
thickness, graphics
slip in from the top.
322032 $ 376.00
2' x 2' Square
Satin anodized aluminum.
Overall size: 25 1/4" x 25 1/4". Image size:
24" x 24" x 1/4" max thickness graphics slip
in on the side.
322024 $ 52.00
322024
Here: A 4' x 8' Vertical
Frame, Separated Base
and Angled Supports are
sold with both bases
(front and back, see
left). However, the Frame
can easily be supported
with only one base
for front-only product
presentation, as shown
here. The accessories
shown: 2 Telescoping
Poles with Anodized
Aluminum Round Shelf
and a Telescoping Pole
with Clear Female
Mannequin. See page 12
for all accessories.
322024
322023
322023
322024
Overall size: 49
1/4"w x 97 1/4"h
x 20"d. Image size:
48" x 96" x 1/4" max
thickness, graphics
slip in from the top.
322033 $ 304.00
322022
4' x 4' Square
www.B N ind.co m
2' x 2'
Square
800 350 4127
7
1" and 4" Frames Freestanding 2' x 8'
1" Frames
4" Frames
2' x 8' Vertical Frame with Separated Base
and Angled Supports
Frame: satin anodized aluminum.
Base: powder coated steel. Base sits 4" away
from frame. 2 holes per side in bases for Pole
Accessories (see page 12).
2' x 8' Vertical Frame with Separated Base
and Angled Supports
Frame: satin anodized aluminum.
Base: powder coated steel. Base sits 4" away
from frame. 2 holes per side in bases for Pole
Accessories (see page 12).
Overall size: 25 1/4"w x 97 1/4"h x 32 3/8"d.
Image size: 24" x 96" x 1/4" max thickness,
graphics slip in from the top.
322068 $ 375.00
Overall size: 31 1/4"w x 103 1/4"h x 32
3/8"d. Image size: 24" x 96" x 1/4" max
thickness, graphics slip in from the top.
322071 $ 510.00
2' x 8' Vertical Frame with Single Base and
Gusset Supports
Frame: satin anodized aluminum.
Base: powder coated steel. Base sits
underneath frame. 2 holes per side in base for
Pole Accessories (see page 12).
2' x 8' Vertical Frame with Single Base and
Gusset Supports
Frame: satin anodized aluminum.
Base: powder coated steel. Base sits
underneath frame. 2 holes per side in base for
Pole Accessories (see page 12).
Overall size: 25 1/4"w x 97 1/4"h x 24"d.
Image size: 24" x 96" x 1/4" max thickness,
graphics slip in from the top.
322069 $ 306.00
Overall size: 31 1/4"w x 103 1/4"h x 24"d.
Image size: 24" x 96" x 1/4" max thickness,
graphics slip in from the top.
322072 $ 441.00
2' x 8' Vertical Frame with Separate
Gusset Supports
Frame: satin anodized aluminum.
Base: powder coated steel.
2' x 8' Vertical Frame with Separate
Gusset Supports
Frame: satin anodized aluminum.
Base: powder coated steel.
Overall size: 25 1/4"w x 97 1/4"h x 20"d.
Image size: 24" x 96" x 1/4" max thickness,
graphics slip in from the top.
322070 $ 284.00
Overall size: 31 1/4"w x 103 1/4"h x 20"d.
Image size: 24" x 96" x 1/4" max thickness,
graphics slip in from
the top.
322073 $ 396.00
Top Left, left to right
Bottom Left, left to right
(1) 4" x 2' x 8' Vertical
Frame, Separated Base
and Angled Supports,
(2) Telescoping Poles
with Clear Acrylic Boxes
(on front and back).
(1) 4" x 2' x 8' Vertical
Frame, Separated Base
and Angled Supports,
(2) Telescoping Poles
with Wood Square
Shelves (on front and
back).
(1) 4" x 2' x 8' Vertical
Frame, Single Base and
Gusset Supports,
(4) Telescoping Poles
with anodized aluminum
Round Shelves (on front
and back).
(1) 4" x 2' x 8' Vertical
Frame, Single Base and
Gusset Supports,
(2) Telescoping Poles
with Mannequins (on
front and back).
(1) 4" x 2' x 8' Vertical
Frame, Separated Base
and Angled Supports,
(2) Telescoping Poles
with Square Shelves, (2)
Telescoping Poles with
Graphic Holders,
(2) customer-provided
graphics (on front
and back).
(1) 1" x 2' x 8' Vertical
Frame, Single Base and
Gusset Supports,
(2) Telescoping Poles
with Mannequins
(on front and back).
(1) 1" x 2' x 8' Vertical
Frame, Single Base and
Gusset Supports,
(2) Telescoping Poles
with Clear Acrylic Boxes
(on front and back).
(1) 4" x 2' x 8' Vertical
Frame, Separated Base
and Angled Supports,
(2) Telescoping Poles
with Clear Acrylic Boxes,
(2) Telescoping Poles
with Graphic Holders,
(2) customer-provided
graphics (on front and
back).
A close-up of the Separate Gusset Support. Each Separate Gusset is the same, and has an asymmetrical
profile with a securing set screw.
8
www.B N ind.co m
800 350 4127
9
4" Frame Wall/Ceiling Suspension Options
The Frames can be
ceiling-suspended,
installed on the
wall, or simply
leaned against the
wall to be easily
re-positioned.
For freestanding
applications, the
Frames can be
combined with
bases. These bases
can be further
accessorized with
hardware to display
products.
Wall Cleated
Leaning
Against
the Wall
Suspended
From The
Ceiling With
the Cable
System
Mounted
to Existing
Vertical
Standards
The Cable System
Suspension for CeilingSuspended Applications
The bottom of the Cable
assembly is screwed
into pre-drilled holes
on the top side of the
Frame. The top part
of the assembly is
screwed into the ceiling.
Screws for fixing plate
not included. Blocking
or appropriate anchors
reccommended.
Hardware with 12'
of Cable
322100 $ 50.00/ea
Left: The 4' x 8'
Vertical 4" Frame
leaning against the
wall.
Wall Cleat
Steel Wall Cleats are
secured to the wall
and are slipped into
the frames behind
graphics. Screws
or wall anchors not
included.
When using this
cleat it will press
slightly into the back
of the 1/4" thick
foamcore graphic to
be held securely in
place. Ask your sales
representative for
quantities required for
your particular Frame
size and application.
322096 $ 7.00/ea
10
www.B N ind.co m
The Cable System
Suspension for Typical
Hung Ceiling Grids
Same as left, except
the top T-Bar Mount
grabs the typical hung
ceiling grid. Hardware
with 12' of Cable
322102 $ 68.00/ea
Note: Please indicate
which frame you
would like to use with
the Cable System,
as each frame is
custom-drilled to
accommodate the
Cable drops.
Existing Vertical
Standard Attachment
Used to mount the
frames to existing
1/2" x 1" o.c. wall
standards. This piece is
used in conjuction with
the Wall Cleat. One side
of the Wall Cleat slips
into the attachment,
and the other side into
the slot in the Frame
behind the graphic.
Standard Attachments
stand the Frame 4"
from the wall. Ask your
sales representative for
quantities required for
your particular Frame
size and application.
322093 $ 12.00/ea
800 350 4127
11
Pole Accessories for Bases
Collage Frame Sets
24" x 24"
Graphic
24" x 24"
Graphic
36" x 24"
Graphic
36" x 37"
Graphic
24" x 24"
Graphic
24" x 24"
Graphic
36" x 12"
Graphic
Telescoping Pole,
Anodized Aluminum
Round Shelf
Pole adjusts from
H MANNEQUIN
30" to 55". Shelf is
10" dia.
322043
$ 70.00
Telescoping Pole,
Wood Round Shelf
Pole adjusts from
30" to 55". Shelf is
10" dia. See page 14
for color and material
choices.
322044 - color code
$ 88.00
Telescoping Pole,
Acrylic Round Shelf
Pole adjusts from
30" to 55". Shelf is
10" dia. See page 14
for color choices.
322045 - color code
$ 80.00
Telescoping Pole,
Anodized Aluminum
Square Shelf
Pole adjusts from 30"
to 55". 9" square.
322046
$ 65.00
Telescoping Pole,
Wood Square Shelf
Pole adjusts from 30"
to 55". 9" square. See
page 14 for color and
material choices.
322047 - color code
$ 88.00
Telescoping Pole,
Acrylic Square Shelf
Pole adjusts from 30"
to 55". 9" square.
See page 14 for color
choices.
322048 - color code
$ 82.00
74" x 38" Vertical
Hanging Collage Set
48" x 48" Hanging
Collage Set
1" Frame: satin anodized
aluminum. Can accommodate
graphics up to 1/4" thick.
The 10" Anodized
Aluminum Round
Shelf on the
stainless steel
telescoping pole.
The Frames
with Separated
Bases or Single
Bases can
accommodate
the telescoping
pole accessories.
Graphics slip in from the
side. Overall size:
74 1/4" x 37 3/8".
322094 $ 139.00
1" Frame:
satin anodized
aluminum. Can
accommodate
graphics up to
1/4" thick.
22" x 28"
Graphic
Graphics slip in from
the side. Overall size:
49 1/4" x 49 1/4".
322104 $ 162.00
14" x 22"
Graphic
22" x 28"
Graphic
14" x 14"
Graphic
22" x 9 3/4"
Graphic
22" x 9 3/4"
Graphic
Telescoping Pole,
Square Tray
Pole adjusts from 30"
to 55". Shelf is 9" x
9" x 3/4" with 1/2"
lip. Tray is formed
laminate over a MDF
core. See page 14 for
color choices.
322049 - color code
$ 121.00
Telescoping Pole,
Round Tray
Pole adjusts from 30"
to 55". Shelf is 9"
dia. x 3/4" with 1/2"
lip. Tray is formed
laminate over a MDF
core. See page 14 for
color.
322050 - color code
$ 119.00
Telescoping Pole,
Clear Acrylic Box
Pole adjusts from 30"
to 55". Box is 12" x
12" x 12".
322053
$ 197.00
Telescoping Pole,
with Graphic Holder
Pole adjusts from 30"
to 55". Graphic holder
can accommodate
graphics up to 1/2"
thick. Two set screws
hold graphic in place.
322054 $ 58.00
322056 TELESCOPING PANT HOLDER POLE
322055 w/o MANNEQUIN322055 w/o MANNEQUIN
12
Telescoping Pole
with or without
Mannequin
Pole adjusts from 55"
to 75".
Pole without
Mannequin
322085
$ 57.00
Telescoping Poles
with Horizontal Bar
Pole adjusts from
30" to 55". Round
bar slips through
telescoping poles, and
has closed ends.
Pole Set for 2' wide
Freestanding Frames
overall width 21".
322089
$159.00
Pole with Clear
Female Mannequin
322084 PANT HANGER ASSEMBLY WITH 1” HANGBAR
322085-010
$197.00
Pole
Set for
4' wide
322055
WITH
MANNEQUIN
322055 WITH MANNEQUIN
Freestanding Frames
Pole with Clear Male
overall width 37".
Mannequin
322056
322088
$169.00
$207.00
www.B N ind.co m
22" x 45"
Graphic
14" x 22"
Graphic
14" x 14"
Graphic
22" x 28"
Graphic
22" x 9 3/4"
Graphic
14" x 14"
Graphic
22" x 9 3/4"
Graphic
28" x 37" Countertop Collage Set with
Separate Gusset Supports
1" Frame: satin anodized aluminum. Can
accommodate graphics up to 1/4" thick.
Graphics slip in from the side.
Overall size: 38"w x 29 1/4"h x 20"d.
322092 $ 306.00
14" x 14"
Graphic
23" x 70" Vertical Freestanding Collage Set
with Separate Gusset Supports
1" Frame: satin anodized aluminum. Can
accommodate graphics up to 1/4" thick.
Graphics slip in from the side.
38" x 75" Vertical Freestanding Collage Set
with Separate Gusset Supports
1" Frame: satin anodized aluminum. Can
accommodate graphics up to 1/4"
thick. Graphics slip in from the side.
Overall size: 23 3/8"w x 70 1/2"h x 20"d.
322095 $ 352.00
Overall size: 38"w x 75"h x 20"d.
322091 $ 390.00
800 350 4127
13
Materials, Colors, and Finishes Guide
Terms And Conditions
Stock Aluminum Finishes
ORDERING BY PHONE
Stock Metal Finishes
1-800-350-4127
(outside Northern California)
1-650-593-4127
(Northern California)
ORDERING BY FAX
Clear Anodized
Aluminum -038
Black Anodized
Aluminum -039
Polished Chrome
-003
Brushed Chrome
-004
White Matte
Black Powder
Powder Coat -161 Coat -160
Blackened Steel
-155
1-650-593-3112
Silver Powder Coat
-163
(ready 24 hours a day)
Stock Laminates
White Matte
Laminate -209
White Gloss
Laminate -363
CUSTOMER SERVICE
Customer service is available Monday-Thursday
from 8:00am to 5:00pm PST, and Friday 8:00am
to 12:00pm PST to answer any of your questions
regarding products or orders. Please have your
account number and purchase order number
available.
Black Matte
Laminate -205
Black Gloss
Laminate -254
Stock Wood Veneers
Maple Veneer
-301
Cherry Veneer
-3031
Maple Laminate
-201
Cherry Laminate
-286
Walnut Laminate
-389
WARRANTY
We fully support the quality of our product. If there
are any manufacturing defects, please
contact your Account Executive or our Customer
Service Department for assistance.
Recycled Wood Veneers
Walnut Veneer
-3049
Redwood
-3013
CATALOG ERRORS
The catalog has been reviewed to present
information and prices as accurately as possible. If
an error is found in description or price, we reserve
the right to correct it.
PRICES ARE SUBJECT TO CHANGE AT ANY TIME.
Black American
Walnut
-3027
Stock Vinyl Colors
ORDER SHIPMENTS
Orders which are in stock will ship via ground, unless
another service level is requested by the customer in
2 - 5 days.
Matte White
-903
Gloss White
-901
Paintable Vinyl*
-910
Silver
-902
Matte Black
-904
Gloss Black
-905
Gloss Brown
-906
Gloss Red
-907
Maple
-908
Walnut
-909
*Notes on Paint-able vinyl
•B&N provides the panel in Paintable Vinyl, customer to paint.
•Use ONLY LATEX PAINT, not Oil-based paints or solvent-based thinners, as these may damage the surface.
Stock Acrylic
Clear
-500
14
Frosted One Side Frosted Both
-502
Sides -503
Stock Fabrics
Gloss White
-591
Blanca
-708
Gloss Black
-592
www.B N ind.co m
Chalk
-710
Platinum
-709
Chocolate Pear
-900
BACK ORDERS
Unless otherwise noted, back orders will ship as
soon as they are in stock at our facility.
Our Account Executives or Customer Service
Department will keep you advised on the status of
all back orders.
CANCELLATION AND RETURN ITEMS
1. Stock items must be returned within 30 days, in
re-sellable condition. Return of stock items will result
in a re-stocking fee of 25%. Freight charges are the
responsibility of the customer. Returned items will
not be accepted unless B&N Industries, Inc. has
been notified prior to the shipment and has issued
a return authorization. Damages in shipment of a
return is not B&N Industries, Inc’s responsibility.
2. Non-stock (custom) items may not be returned.
FREIGHT AND MULTIPLE SHIPMENTS
1. Shipments to multiple destinations will result
in additional charges, unless otherwise stated
on your quotation.
2. Splitting the order into multiple packages to one
location, requested by the customer, will result in
an additional packaging charge unless otherwise
stated on your quotation.
3. Collect or 3rd party billing shipments are the
responsibility of the freight payer.
4. Initial freight quotations are subject to re-quote
at the time order is placed or if shipment is
delayed.
5. International freight quotes are for transportation
only. The quote does not include broker, customs
fees, duties, taxes, etc. Customer is responsible to
set up and pay.
6. Weights and measurements may change due to
changes in suppliers and/or packaging.
7. B&N will not guarantee delivery times or dates.
Delivery times and dates are the responsibility of
the shipping agent.
PRODUCT DISCREPANCIES AND DAMAGES VIA
SHIPMENT
1. Customer must inspect goods upon delivery for
damage or discrepancy.
2. B&N accepts no liability for damage incurred
during shipping. Any damage found at time of
delivery must be noted by customer on delivery
receipt and signed/initiated by driver. Customer is
to retain all packaging with damaged item for an on
site inspection by carrier. For damage on 3rd party
or collect shipments, the customer is responsible
for filing the claim with the carrier for financial
reimbursement.
3. If product arrives in a damaged condition, a
freight claim must be filed with the delivering
carrier. Retain packing material and note on the
Bill of Lading “DAMAGED” . Our Customer Service
Department will assist you with any questions
regarding filing a freight claim.
4. All claims regarding shortages and freight
damages must be presented WITHIN 7 DAYS of
receiving the shipment.
PAYMENT METHODS AND TERMS
1. We accept VISA, MASTERCARD,
and AMERICAN EXPRESS.
2. Payment is due in full prior to shipping of
product for all PREPAID ACCOUNTS, we do not ship
COD. For payment made by check or bank transfer,
the order will be processed upon receipt and
approval of the check or receipt of the funds.
3. A minimum $5000 order is required
to open an account.
4. Approved repeat customers can qualify for
NET 15 day terms. A credit application must be
completed with the necessary references. Please
allow 2-3 weeks for processing. Once credit is
approved, a 50% deposit is required on the initial
order and future orders will be evaluated for deposit
requirements. All custom orders will continue to
require a 50% deposit.
SALES TAX
1. Any order delivered within the
States of California, Illinois, or New York are taxable
unless we receive a valid CA/IL/NY resale card
prior to the shipment.
2. Taxable orders paid for by the customer and
stocked at our California facility will be taxed (at
the current rate for San Mateo County) regardless of
ultimate destination.
3. Orders from resellers located outside California
that are drop-shipped to a customer within
California, are subject to sales tax, unless we
receive a valid CA resale number.
800 350 4127
PROTOTYPES, DRAWINGS, TOOLING, AND FIXTURES
1. Drawings provided by B&N are the exclusive
property of B&N Industries, Inc.
2. Prototypes made from other than detailed prints
or B&N Industries, Inc. approved drawings, are
subject to our interpretation of sketches or verbal
instructions supplied by the customer.
3. Tooling dies and fixtures made and used
exclusively for a job or customer, remain the
property of B&N Industries, Inc.
unless otherwise established.
PHOTOGRAPHY OF
COMPLETED PROJECTS
B&N Industries, Inc. reserves the right to
photograph, upon completion, any project that has
utilized our product offerings, and retains the rights
to use the photographs in advertising, our website,
public relations, catalogs and all
marketing materials.
15
B&N Industries
Main Offices:
1409 Chapin Avenue, 2nd Floor
Burlingame, California 94010
1.800.350.4127
www.BNind.com
New York Showroom and Offices:
420 West 14th Street
New York, New York 10014
212.255.4110
© B&N Industries, Inc.