4436 W. Manufacturers Street
Springfield, MO 65803
Phone: (800) 862-6088
www.crosstechcp.com
www.clearcreeksiding.com
Concrete Log Siding Material Estimate Worksheet
Thank you for your interest in ClearCreek Concrete Log Siding.
If you know the specifics of your project, the following information would allow us to provide you
with a very accurate material quote.
1) Wall Dimension Schedule
ID
Description
Width
Height
"X" if this is a
gable (A)
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
(A) When a wall has a gable, please provide the gable area separately.
Please see DRAWING A for a more detailed explanation of the information required.
Please do not subtract window/door openings. That will be done using the provided
door and window information.
Material Estimate Worksheet - Page 2
2) Door and Window Dimension Schedule
ID
Description
# of
Doors/ # of Pcs of
Windows
Trim
Width of
Door/
Window
Height of
Door/
Window
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
Be sure to include all openings such as Garage Doors, etc.
Please see DRAWING B and C for a more detailed explanation of the information required.
Material Estimate Worksheet - Page 3
3) Number of Inside Corners
( each piece is 10' in length )
4) Number of Outside Corners
( each piece is 10' in length )
5) Number of 135 deg. Outside Corners
( each piece is 10' in length )
This trim is often needed for the outside corner of bay windows.
6) Accessories
Count
Dryer Vent Block
6.5" x 6.5"
Electrical Outlet Block, Single
4" x 5.75"
Faucet Mounting Block
3" x 4"
Faucet Mounting Block, Low profile
8" x 8"
Light Block
6.5" x 6.5"
7) Any special features (i.e., bay windows, arched windows, etc.) Please describe-
8) Zip code of project location (used for freight estimate) _________________
Thank you for taking the time to complete this information. If you have any questions
regarding how to complete this worksheet, please give us a call at (800) 862-6088 and we
would be very happy to assist.
DRAWING A - Wall Dimension Schedule
1) Wall Dimension Schedule
ID
Description
Width
Height
A
North Wall
24' 6"
9' 6"
B
North Wall - Gable
24' 6"
4'
"X" if this
is a gable
X
C
D
In this example, the gable end is listed on a separate line and an X is placed in the correct box
DRAWING B - Door and Window Dimension Schedule
2) Door and Window Dimension Schedule
ID
A
B
C
D
Description
West wall door
West wall window
West wall window
# of Doors or
Windows
Total # of
Sills + Head
Trim
Width of
Door
/Window
Height of
Door/
Window
1
2
1
1
4
1
36
24
54
84
36
60
Be sure to include all openings such as Garage Doors, etc.
Note that the sill trim at the bottom of the window and the head trim at the top of the window and/or
door are identical in shape and length.
The sill and head trim is cut to length in the factory and the two ends receive the same concrete finish
as the rest of the part. Therefore we need precise "Width" measurements of all doors and windows.
(Please see DRAWING C for a more detailed explanation of the exact measurement required). The
door and window casings ( the part that runs vertically on both sides ) is cut to length in the field and
therefore the vertical measurement is not as critical as the width.
The number of openings is required in order to calculate the square footage that is to be subtracted
from the wall footage. Of course the number of pieces of trim is also required. As you can see from
our example, it cannot always be assumed that a window requires both a sill and head trim.
DRAWING C - Door and and Window "Width" Measurement
The sill and head trim is cut to length in the factory and the two ends receive the same concrete finish
as the rest of the part. Therefore we do need precise "Width" measurements of all doors and
windows.
Window Width Measurement
The picture below details the measurement that we need for windows. It is the outside dimension of
the window frame on the outside of the window.
Door Width Measurement
The measurement for a door that has a piece of trim on the outside that you wish to remain on the
door (sometimes called a Brick Molding ) is the same as the measurement for a window -- simply
measure the outside dimension of the trim across the door horizontally.
For a door that does not have a piece of trim on it (or one that has the trim that you wish to remove
prior to installing Log Siding) we need the measurement that is the INSIDE of the door jambs + 1/2".