T8 LED Retrofit Kit Se R a et an led E rofi d M nc t IP ain losu Ra ta re ted in s w /W Cr it e itic h t L al LED iste Lis L d tin am gs ps For IP Rated/Wet Listed Sealed Enclosures T8 LED Retrofit Kit T8 5 year warranty Education Cleanroom/Containment Challenging Applications... Demand Kenall > Correctional ED T8 L Healthcare Food Processing Retrofit Sealed Enclosures and Maintain Critical Listings LED Simply upgrade your existing T8 lighting system to LED technology with Kenall’s T8-LED retrofit kit — the ONLY T8 LED retrofit kit that maintains critical listings of installed IP rated and Wet listed sealed enclosures in correctional, transportation, education, cleanroom & containment, healthcare, food processing and other applications. Product Features • 5-year combined lamp & driver warranty • Approved for the DesignLights Consortium® (DLC) Qualified Products List (QPL) • UL 1598C compliance • Ceramic mid-power LED array maintains color stability providing better lumen maintenance over time • LED lifetime (L70) of 100,000 hours • Extruded 6063-T5 aluminum heat sink for effective thermal management; reduces lumen depreciation and extends luminaire life • Extruded, impact-resistant frosted acrylic lens • 3000K, 3500K and 4000K CCT; 80 CRI • Meets or exceeds FCC CFR Part 15 • 89-102 lumens per watt • 120-277 volts • Compatible with select battery backup systems. Consult factory for options. • > 0.90 Power Factor • RoHS Compliant • Designed and manufactured in the USA C Note: These lamps are not to be used in Class 1 Div 2 applications. www. kenall.com P: 800-4-Kenall Email: [email protected] 1020 Lakeside Drive Gurnee, Illinois 60031 The Kenall product shown on this page is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. Built to Perform Kenall’s 50 years of experience in IP rated/Wet listed sealed enclosures — with our commitment to LED technology and design & manufacturing in the USA — has led to a new benchmark in quality. The T8 LED outperforms both typical fluorescent and current T8 LED lamps. This retrofit option is virtually maintenance free; requiring less lamp changes than a fluorescent lamp, providing up to 30% reduction in total cost of ownership over a F32T8 lamp. 1544 Performance 1158 Initial Lamp Lumens 772 Lamp Type @ 25°C* (lm) Efficacy (lm/W) Input Power (W) Drive Current (mA) Estd. L70 LED Life (Hrs) 55L30K 5059 89 57 117 100,000 55L35K 5769 101 57 117 100,000 55L40K 5820 102 57 117 100,000 386 2 PROJECT INFORMATION 1 Job Name T8-LED Fixture Type T8 SERIES – LED Model: T8-LED-48-A-FA-55L35K-SCC-DV Catalog Number PRODUCT FEATURES: » Simple upgrade of existing T8 lighting system to LED technology The FIRST 5-year combined lamp/driver warranty based on 24/7 operation in an IP Rated & Wet Location listed sealed enclosure! Approved by » Maintains existing safety listing of installed Wet Location Kenall Fixtures » Reduces energy and maintenance costs while maintaining lighting performance » Included ceramic mid-power LED package reduces color shift and provides better lumen maintenance over time compared to typical plastic LED packages » Environmentally conscious: No UV spectrum and no mercury (RoHS compliant) SPECIFICATIONS LAMP CONSTRUCTION: Extruded 6063-T5 aluminum heat sink. White polycarbonate T8 bi-pin endcaps. Extruded impact-resistant frosted acrylic lens. LAMP ELECTRICAL: Ceramic mid-power LED array on a metal-clad aluminum circuit board. Maximum 4-step MacAdam CCT variation allowance within ANSI C78.377-2008 standard. See Ordering Information for color temperature options. 80 CRI minimum. DRIVER ELECTRICAL: Driver operates two Kenall T8-LED lamps. Universal 120-277VAC, 50/60 Hz input (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Constant-current output (≥120 Hz, <15% ripple). EMC meets or exceeds FCC CFR Part 15. RoHS compliant. Minimum starting temperature -30°C/-22°F. Designed for quick & easy installation! INSTALLATION: These lamps are only to be installed in fixtures with a max ambient temperature of 25°C. Lamp system consists of two (2) T8-LED lamps and one (1) driver to retrofit an existing two-lamp F32T8 system. Existing T8 ballast must be disconnected and removed from luminaire. Existing lamp holders and wiring shall be reused. Driver has 12" 18 AWG stranded tinned wire leads (input and output). See Wiring Diagrams and Installation Instructions for further installation details. Labeling required for retrofit notification included. PHOTOMETRICS: Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com. LISTINGS: UL1598C classified for use in Kenall Wet Location Listed and IP-rated fluorescent luminaires. LED C LAMP ORDERING INFORMATION▼ (Ex: T8-LED-48-A-FA-55L35K-2) Model Length T8-LED Series 48 Lens Type A Length 48 4' Series A Series A ▼ Lamp Type Lamp Qty Lamp Type 55L30K 55 Watt 3000K LED 55L35K 55 Watt 3500K LED 55L40K 55 Watt 4000K LED Lamp Qty 2• 2 Lamps 10† 10 Lamps FA Lens FA Frosted Acrylic • Must order 1 Driver Qty † Must order 5 Driver Qty Lamps and Drivers not sold separately DRIVER ORDERING INFORMATION▼ (Ex: SCC-DV-1) Driver Type Voltage SCC Driver Type SCC Standard-Output Constant Current Driver Qty DV Voltage DV 120-277 Volts www. ▼ kenall.com Driver Qty 1 1 Driver 5 5 Drivers P: 800-4-Kenall [email protected] Lamps and Drivers not soldEmail: separately 1020 Lakeside Drive Gurnee, Illinois 60031 The Kenall product shown on this page is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. DIMENSIONAL DATA DCC DRIVER SCC DRIVER Kenall T8 Retrofit 1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com ©2014 Kenall Mfg. Co. All rights reserved. L10058-08222014 ¯¯
© Copyright 2024