1. home and garden
2. home furnishings
3. lamps and lighting

GLOBAL WARNING
W W W.HA ZTEC.UK
lightbar overview
2
january 2015
1
warning lights, work
lights and ancillaries
3
sirens, speakers & controls
4
warning beacons
see separate brochure (4)
see separate brochure (1)
see separate brochure (3)
lightbar overview
The ideal design of a lightbar will depend on the application.
In some cases a thin streamlined design is important. in other
cases the need to incorporate siren / PA speakers is important,
maybe facilities are needed to display additional information
or perhaps cost is a high priority.
To accommodate these varying requirements, Haztec offers
many different lightbar ranges incorporating various light
technologies from inexpensive Halogen rotators to high output
strobes or the latest high output, long life low maintenance
LED lightbar technology. Latest generation LEDs when correctly
mounted and powered as part of a Haztec LED lightbar, offer a
life of 50 - 60,000 hours. They can operate over a wide range
of temperatures and are simple to control, allowing multiple
flash patterns to be easily incorporated and synchronised if
required. LED technology also offers silent operation with no
moving parts to wear out.
All lightbars are available in blue amber and red, with other
colours available on request.
Xpert SLE (see page 7)
Compact low profile LED lightbar with an overall height of just 57mm. Can be
supplied with integral siren & speaker and also with magnetic or permanent
mount. Many different lighting configurations available including clear or
coloured lenses. Can be configured with front only or rear only lighting.
XP Minibar (see page 8)
Compact minibar available with halogen, strobe or LED technology. Versions
for magnetic or permanent mounting, choice of lens colours and options for
integral alley lights etc. Can accommodate integral siren if required.
Xpress Lightbars (see page 9)
Highly versatile, able to accept numerous options including information sign
displays and speakers. Available with LED strobe or rotator technology.
Xtra (see page 10)
Raised profile lightbar for use as either a single level lightbar with raised base
to prevent obscuration or a dual level bar. Can incorporate infosign displays and
speakers.
Xtreme (see page 11)
Dual level lightbars, for when extreme visibility is needed. This allows numerous
combinations including rotating beacons with lower level strobes, scene lights
or stop, tail turn lights. Can incorporate info sign displays and speakers.
Xcess-P lightbars (see page 12)
Ultra thin Xcess lightbars provide a thin streamlined solution using LED
technology. Truly impressive 360 degree illumination.
Xpert (see page 13)
Similar to Xpert SL but with a greater height so suitable for a wider range of
components such as 360 degree beacon modules as well as dual height rows of
LED modules and speakers.
Xpert DX (see page 14)
Raised height version of Xpert designed to accommodate strobe or rotating
halogen beacons, can also accommodate speakers if required.
Xpert SL (see page 15)
High visibility, low profile LED lightbar designed specifically for latest LED
technology. Only 57mm high and available with clear or coloured lenses. Wide
choice of options and functions, including speaker if required.
2
lightbar optional equipment
Light bars are normally designed to meet specific requirements
and available in a wide range of lengths and colours, with various customisation opportunities. Some of the popular possibilities are shown below, but please contact our sales department
to discuss availability of particular options on specific lightbar
ranges. Haztec regularly produces customised or or even
bespoke products, if the equipment you require is not shown
please contact our sales team for further details.
Alley Lights
Scene / takedown lights
Headlights
Info Signs
Centre signs
Speaker grille
LED Stop / Tail / Turn lights.
Lens inserts
Mirrors
Mounted in the ends of lightbars
allowing areas to the side of the
vehicle to be illuminated, they are
available with either halogen or LED
lightsources. LED versions have a
power consumption that is much lower
than a halogen lamp and a working life
of around 50,000 hours- many times
longer than a halogen alternative.
LED dot matrix displays that provide
fixed or scrolling messages / pictograms to warn and inform other traffic.
Messages are pre-programmed and selected from a library of messages using
a controller mounted in the vehicle.
Duplicates the stop, tail and turn lighting of the vehicle. Can be especially
valuable on vehicles where the rear
lighting could be obscured.
Mounted on the front and or rear of
the lightbar, they provide white light
to illuminate a work scene. Can be
programmed to also flash as part of the
warning light sequence.
Can often enhance the warning capability by providing advanced notification
of the type of hazard about to be
encountered. Centre signs can also be
used to promote corporate branding.
Can be illuminated with either low
cost tungsten or low maintenance LED
lighting.
Strobe & halogen lightsources generate
white light. A coloured lens is then used
to produce the desired warning colour.
Lens inserts allow a dual colour output
to be generated.
With Modern LED technology, the LED’s
generate the required coloured light,
allowing clear lenses to be used and
avoiding the need for lens inserts
Mounted on the front and or rear of
the lightbar, they provide white light to
illuminate a work scene. They typically
incorporate an optical design that directs
the light downwards.
Many lightbars can accommodate the
siren speaker. These can be supplied
with speaker grilles, manufactured from
polycarbonate or stainless steel. A range
of speakers is available to suit different
applications.
When beacons or other wide angle light
sources are used, mirrors can dramatically enhance the output of the lightbar
by re-directing otherwise wasted light.
They can also emphasise the light in a
particular direction.
3
lightbar illumination options
The 3 basic lightbar illumination technologies are halogen,
strobe and LED. Some lightbars are only compatible with LED
technology others are compatible with multiple technologies,
the final choice being to suit user preferences. Halogen or
strobe lightbar illumination is provided by components that
have been specifically designed to be mounted inside lightbars.
If LED technology is preferred, there is a is a wide choice of
fitted components. Some of these components are specifically
designed for use inside lightbars only, but the majority are
available either as components in lightbars or as stand alone
beacons / directional warning units.
Halogen Rotators
Strobe Units
•
•
•
•
•
•
•
•
•
•
Lowest cost solution
Simple to maintain
Typical lamp life 2,000 Hrs
Lamp guarantee N/A
1 Year motor / rotator warranty
Bright flash
Variable flash patterns
Typical lamp life 3,000 Hrs
3 month lamp warranty
1 or 3 Yr power pack warranty (version dependant)
360o LED modules - Generation 3
•
•
•
•
50,000 Hr typical life
High output
Multiple flash patterns
High / low brightness settings
9-3541 - 360 degree LED module
• Low current consumption
• 5 Year warranty
• Silent operation with no moving parts to wear out
9-3751 - 360 degree LED module
360o LED modules - Generation 2
• 20,000 Hr typical life
• Low current consumption
• 1 Year warranty
4
Proflex - 360 degree LED module
lightbar illumination options - corner modules
•
•
•
•
Corner LED modules - Generation 3
Each module provides 90o coverage.
50,000 Hour typical life
Single or dual row options
Single or dual colour output
• High output
• Low current consumption
• 5 Year warranty
10408 Corner module
XE Corner module
• Single colour
• Single or dual colour
• Dual colour uses
colour change LEDs
XD1 Corner module
XD2 Corner module
• Single or dual colour
• Dual colour uses
colour change LEDs
•
•
•
•
• Dual row
• Single or dual colour
• 1 Colour per row
XED Corner module
EC65 approved AS A DUAL COLOUR MODULE
Class 2 approved in blue AND amber (same module)
1 XED module for each lightbar end
5 LED heads per XED module
5
lightbar illumination options - inner modules
•
•
•
•
LED inner (directional) modules - Generation 3
Normally used in addition to corner modules
50,000 Hr typical life
High output
Low current consumption
10406 Linear LED
• Single or dual colour
(3+3 LEDs)
XD Wide Angle
• Single colour
XE Inner module
• Single or dual colour
• Dual colour uses
colour change LEDs
XD2 Focussed
• Dual row
• Single or dual colour
• 1 Colour per row
• 5 Year warranty
• Single or dual row options
• Single or dual colour
XD1 Focussed
• Single or dual colour
• Dual colour uses
colour change LEDs
XD2 Wide Angle
• Dual row
• Single or dual colour
• 1 Colour per row
XEM
• Single colour
• Combines LEDs with mirrors giving high output at a cost effective price
6
XD1 Wide Angle
• Single or dual colour
• Dual colour uses
colour change LEDs
XD2 Combined
• Dual row
• Single or dual colour
• 1 Colour per row
xpert sle compact led lightbar
•
•
•
•
•
Magnetic or permanent mount
Magnetic mount version is wind speed tested to 200kmh
Latest slimline LED technology
Option for front or rear illumination only
Optional integral speaker and siren
Overview
ideal magnetic mount operation.
Xpert SLE is a compact LED lightbar with a very wide range
of configuration options. it can be supplied with either 2 or
4 corner modules giving either front / rear or full 360 degree
coverage. In addition 1 or 2 LED inner modules can be added
to both the front and rear of the bar if required. If a single
LED inner module is added, this can be split to provide “half
and half” flashing operation allowing symmetrical side to side
flashing.
Alternatively 2 x 360 degree LED modules can be fitted.
Powerful 10W LED takedown lights can be fitted to the front of
the bar, these can be set for flashing mode for extra visibility or
can be set to steady operation for scene illumination. Choice
of different flash controllers enabling functions such as front /
rear switching to be included if required. Despite its small size
Xpert SLE can also be fitted with an integral siren and speaker
along with 4 x LED corner modules providing an all inclusive
solution with 360 degree visibility, siren and speaker, this is
Materials
The lens and base is moulded in strong UV stabilised
polycarbonate. Clear lens as standard, coloured lens on request.
Mounting
Can be ordered as a permanent mount version or as a magnetic
mount version. The magnetic mount version is supplied with
heavy duty rubber paintwork protectors to cover the magnets.
An optional quick release safety strap is also available for added
security.
Magnetic mount versions are wind tested to 200kmh
Approvals
EC65 class 2 approved in blue, 360 degree beacon modules
approved in blue and amber
Colour options available
Lens colour
Clear, blue, amber or red
LED colours
Amber, blue, red or white
Dimensions (mm)
L - 492 (19”)
D - 240
D
H - 57
H
L
Fitted Options
•
•
•
•
•
•
Magnetic or permanent mount.
Fitted speaker
Fitted siren
10408, XE, XEM, XED & 3751 LED modules
LED takedown lights
Clear or coloured lenses
See pages 3 - 6 for details of options
7
xp minibar
• Compact minibar
• Magnetic or permanent mount
• Wind tested magnetic versions available
Overview
XP is a compact minibar which can be configured with various
choices of light source from inexpensive halogen, to latest
generation LED. XP can be supplied with clear or coloured lenses
and can also be configured as an illuminated sign.
Materials
Base and lens is moulded in strong UV stabilised polycarbonate.
Configurations
Mounting
Available in permanent or magnetic mount versions, magnetic
mount versions are supplied with 3M straight lead, switched
plug, 4 x 40KG magnets & moulded rubber protective covers.
Magnetic mount versions have been independently wind tested
to 250km/h on an actual moving vehicle
Approvals
EC65 approved versions in blue and amber with strobe &
rotator light sources.
Available with Halogen, strobe or LED light sources, can be
supplied with alley lights and / or integral siren if required.
Choice of single colour or split lens, optional clear or coloured
lens inserts.
Colour options available
Lens colours
Amber, Blue, Clear, Red or Green
Sign colours
White (Opal) or Yellow
Lens Inserts
Amber, Red or Clear
Dimensions (mm)
L - 510 (20”)
D - 220
H - 93
H
L
D
Fitted Options
•
•
•
•
•
Halogen rotators
Strobe Warning lights & beacons
10408, XD, XD1 & XD2, Proflex & 3541 LED modules
LED or Halogen alley lights
Siren / PA Speaker
See pages 3 - 6 for details of options
8
xpress lightbar
• Extremely versatile design
• Can accommodate infosign system
• Optional additional headlamp and sidelight
units
Overview
Xpress is extremely versatile and can be configured in many
different ways. Speakers can easily be incorporated for PA and
siren functions. The speaker can be housed behind a dedicated
speaker grille, or an illuminated centre sign can be fitted that
incorporates a speaker mesh. Alternatively the centre section
can be used to accommodate the Infosign LED message display
system. Other options such as LED or Halogen alley / scene lights
or external sidelight / headlamp units. can be added if required
along with clear or coloured lens inserts .
Xpress can also accommodate LED arrowbar direction systems or
stop / tail / turn lights.
Materials
The base is manufactured from anodised extruded aluminium,
lenses are moulded in strong UV stabilised polycarbonate.
Mounting
A comprehensive choice of mounting kits is available see page
15 for further details. To maintain ingress protection, mounting
kits attach simply and securely to the base extrusion without the
need for additional drilling
Approvals
EC65 approved in blue with LED light source and in blue and
amber with Strobe &, Rotator light sources.
Colour options available
Lens colours
Amber, blue, red, or clear
Sign colours
White (opal) or yellow Can be
black if no sign required
LED colours
Amber, blue, green, red or white
Dimensions (mm)
L - 429 - 1908 (17” - 75”)
D - 292
H -103.5
H
D
L
Fitted Options
•
•
•
•
•
•
•
•
•
Halogen rotators
Strobe Warning lights & beacons
10408, XD, XD1 & XD2, Proflex & 3541 LED modules
Stop / Tail / Turn lights
LED or Halogen scene lights
LED or Halogen alley lights
Illuminated centre sign
Siren / PA Speaker
Infosign system
See pages 3 - 6 for more details of fitted options
9
xtra lightbar
•
•
•
•
•
Extremely versatile design
Can accommodate infosign system
Optional additional headlamp & sidelight units
Raised profile to avoid obscuration
Can include lower level lighting modules
Overview
The Xtra lightbar features a substantially raised base. This is
designed to help avoid obscuration of the lightbar output when
mounted on a high vehicle and viewed from a low level. In
addition, the raised base also provides a facility for the mounting
of additional lighting equipment beneath the main lens area
without diminishing or obstructing the primary warning lights.
As well as warning lights, the upper level of Xtra can also
accommodate the Infosign programmable sign system.
Solid internal dividers are used with lightbars incorporating
signs to avoid light intrusion. When lightbars have a full lens
configuration, clear dividers are used to maximise the effect of
mirrors whilst providing excellent rigidity and security.
Materials
The base is manufactured from heavy duty anodised extruded
aluminium, lenses are moulded in strong UV stabilised
polycarbonate.
Mounting
A comprehensive choice of mounting kits is available see page
15 for further details. To maintain ingress protection, mounting
kits attach simply and securely to the base extrusion without the
need for additional drilling
Approvals
EC65 approved blue and amber with Strobe & Rotator light
sources.
Colour options available
Lens colours
Amber, blue, clear, red or green
Centre lenses
Amber, blue, clear, red or black
Sign colours
White (opal) or yellow
Dimensions (mm)
L - 576 - 2544 (23” - 100”)
D - 292
H - 156
Lens clamp colours Amber, blue, clear, red or black
LED colours
Amber, blue, green, red or white
Fitted Options
10
•
•
•
•
•
•
•
•
•
•
Halogen rotators
Strobe Warning lights & beacons
10408, XD, XD1 & XD2, Proflex & 3541 LED modules
Stop / Tail / Turn lights
LED or Halogen scene lights
LED or Halogen alley lights
Illuminated centre sign
Siren / PA Speaker
Infosign system
Halogen headlight & sidelight units
See page 3 - 6 for more details of fitted options
L
H2
H1
D
xtreme lightbar
• Extremely versatile design
• Double tier lighting equipment
• Lower level lighting does not obstruct primary
warning
• Can accommodate infosign system
• Optional additional headlamp & sidelight units
Overview
Xtreme is a dual layer lightbar to satisfy the most demanding
lightbar requirements. The upper tier is designed to accommodate strobe or halogen primary lights, whilst the lower level
accommodates Halogen, LED or strobe lights.
Lower level modules operate without diminishing or obstructing the primary warning lights. Blank lenses can be fitted
instead of lighting modules if required in some or all positions.
Lower level options include large flood, spot or wide beam
alley lights.
In addition to warning lights the upper level of Xtra lightbars
can also accommodate the infosign programmable sign system.
Xtreme Lightbars can be supplied complete lightbars or as shell
only, for fitting with equipment by others.
Materials
Base manufactured from heavy duty anodised extruded
aluminium, lenses are moulded in UV stabilised polycarbonate.
Configurations
The potential combination of top and lower level lighting
equipment allows a vast range of possible configurations to
be achieved. Please contact us for a quotation based on your
specific requirement or to enable a member our technical sales
team to explain the available configuration possibilities.
Mounting
A comprehensive choice of mounting kits is available see page
15 for further details. To maintain ingress protection, mounting
kits attach simply and securely to the base extrusion without
the need for additional drilling
Colour options available
Lens colours
Amber, blue, clear, red or green
Sign colours
White (opal) or yellow Can be
black if no sign required
LED colours
Amber, blue, green, red or white
Dimensions (mm)
L - 576 - 2544 (23” - 100”)
D - 296
H - 156
L
H
Fitted Options
•
•
•
•
•
•
•
•
•
Halogen rotators
Strobe Warning lights & beacons
10408, XD, XD1 & XD2, Proflex & 3541 LED modules
Stop / Tail / Turn lights
LED or Halogen scene lights
LED or Halogen alley lights
Illuminated centre sign
Siren / PA Speaker
Infosign system
See page 3 - 6 for more details of fitted options
D
11
xcess-p led lightbar
•
•
•
•
•
•
Ultra thin design
Optional night / day level settings
Latest LED technology
Optional dual colour LED modules
Integral arrow bar option
Cruise Mode
Overview
Xcess-P sets the standard for LED lightbars. The slimline design
minimises the impact on vehicle aerodynamics, but not at the
expense of visibility, latest LED technology offers outstanding
brightness with low current consumption. Cleverly designed
corner modules provide true 360o visibility with 12 high power
LEDs in each module.
In addition to the corner modules, each Lightbar contains a
number of directional modules to the front and rear, these
modules which can have either clear or coloured lenses can
incorporate LED directional warning lights or scene / takedown
lights
In addition to any front / rear units, LED alley lights can be
incorporated at the side of the lightbar. Many different module
combinations can be provided, and this coupled with highly
advanced programming capabilities offering functions such as
day night light levels, cruise mode and multiple programmable
flash patterns, enables Xcess-P to be configured to meet exact
requirements.
LED modules are designed specifically for use with Xcess-P and
can be supplied as single or dual colour types. Where dual colour
LED modules are used, many different switching patterns can be
achieved including blue warning patterns with additional amber
arrowbar functionality.
Selectable options include separate switching of front / rear
corner and inner LED modules, as well as cruise mode on corner
or inner modules, plus arrow / warning functions on inner
modules.
Xcess-P can be interfaced directly with the Haztec Eurosmart
controllers, or alternatively a breakout unit is available to allow
user supplied switches to be used to control required functions.
Materials
The shell is manufactured from anodised extruded aluminium,
lenses are moulded in strong UV stabilised polycarbonate.
Fixing
Various mounting kits are available in including moulded rubber,
adjustable permanent mounts, and hook kits.
See page 15 for more details.
Approvals
EC65 approved in blue and amber versions.
Colour options available
Lens colours
Amber, blue, clear or red
Sign colours
White (opal) or yellow
LED colours (dual
colour modules)
Amber / white, amber / red, amber / blue, amber / green / blue /
red, blue / green
LED colours (single Amber, blue, red, white or green
colour modules)
Fitted Options
12
•
•
•
•
Illuminated centre sign.
Xcess Inner and corner modules
LED alley lights
LED take down lights
See page 3 - 6 for more details of fitted options
Dimensions (mm)
L - 915 - 1676 (36” - 66”)
D - 135
H - 70
D
L
H
xpert lightbar
•
•
•
•
Extremely versatile design
Low profile
Integral speaker options
High visibility lens design
Overview
The new Xpert Lightbar range offers excellent quality with
extreme versatility at a competitive price. With an overall height
of just 79mm, Xpert offers an optimum combination of slim
aerodynamic design coupled with a large light emitting area to
maximise safety. It is ideally suited to the latest long life, low
maintenance LED modules, It is also available with linear strobe
light sources. Xpert has been designed to be accommodate
either single or dual height rows of Haztec 10406 / 10403 &
10408 LED modules. 10408 modules are mounted at the corners
of the lightbar, whereas 10406 & 10403 modules are mounted
at the front or rear of the light bar. 10406 modules have 6
LEDs, these can be single colour or dual colour (3+3). Xpert
incorporates a strong, rigid extruded aluminium base along with
a sleek curved end design and is available in an extensive choice
of lengths, with custom lengths also available to order.
A wide selection of lens, lens clamp and centre piece colours and
sizes, is available (see below.)
Speakers can easily be incorporated for PA and siren functions.
Other options such as LED or Halogen alley / scene lights, as well
as clear or coloured lens inserts can also be added if required.
Materials
The base is manufactured from anodised extruded aluminium,
lenses are moulded in strong UV stabilised polycarbonate.
Mounting
A comprehensive choice of mounting kits is available see page
15 for further details. To maintain ingress protection, mounting
kits attach simply and securely to the base extrusion without the
need for additional drilling
Approvals
EC65 approved in blue and amber versions.
Colour options available
Lens colours
Amber, blue, clear, green or red
Sign colours
White (opal) or yellow. Can be
black if no sign required
LED colours
Amber, blue, green, red or white
Available as either single colour or
dual colour modules.
Dimensions (mm)
L - 429 - 1908 (17” - 75”)
D - 292
H - 79
D
H
L
Fitted Options
•
•
•
•
•
•
•
Strobe Warning lights
10408, XD, XD1 & XD2 & 3541 LED modules
Stop / Tail / Turn lights
LED or Halogen scene lights
LED or Halogen alley lights
Illuminated centre sign
Siren / PA Speaker
See page 3 - 6 for more details of fitted options
13
xpert dx lightbar
•
•
•
•
Extremely versatile design
Raised base profile
Integral speaker options
High visibility lens design
Overview
Xpert DX shares a common design theme with the Xpert lightbar,
but has a raised base profile making it ideal for use with halogen
rotator light sources as well as 3600 strobes.
The same options that are offered with Xpert are also available
with Xpert DX, allowing the same options for lengths, lens
colours etc.
Speakers can easily be incorporated for PA and siren functions.
Other options such as LED or Halogen alley / scene lights, as well
as clear or coloured lens inserts can also be added if required.
Materials
The base is manufactured from anodised extruded aluminium,
lenses are moulded in strong UV stabilised polycarbonate.
Mounting
A comprehensive choice of mounting kits is available see page
15 for further details. To maintain ingress protection, mounting
kits attach simply and securely to the base extrusion without the
need for additional drilling
Approvals
EC65 approved in blue and amber versions.
Colour options available
Lens colours
Amber, blue, clear, green or red
Sign colours
White (opal) or yellow Can be
black if no sign required
LED colours
Amber, blue, green, red or white
Dimensions (mm)
L - 429 - 1908 (17” - 75”)
D - 292
D
Fitted Options
•
•
•
•
•
•
•
•
•
14
Halogen rotators
Strobe Warning lights & beacons
10408, XD, XD1 & XD2, Proflex & 3541 LED modules
Stop / Tail / Turn lights
LED or Halogen scene lights
LED or Halogen alley lights
Illuminated centre sign
Siren / PA Speaker
Infosign system
See page 3 - 6 for more details of fitted options
H - 99
H
L
xpert-sl slimline led lightbar
•
•
•
•
•
•
Just 57mm high
Optional night / day level settings
Independent front / rear switching option
Optional dual colour LED modules
Integral arrow bar option
Cruise Mode
Overview
Xpert SL is just 57 mm high, and is purpose designed to neatly
accommodate the latest Haztec LED technology, providing a
high output, high visibility LED lightbar with a very streamlined
profile.
Xpert SL is available with many different lighting options
including the XE high output corner and inner modules as
well as low profile 360 degree beacon modules Lenses can be
supplied in either clear or coloured material, Centre sections
can have transparent lenses and contain additional inner
lighting modules or can be opaque with or without illuminated
signs (to suit customer preference).
Latest generation flash controllers support sophisticated
flash pattern requirements they also offer functions such as
cruise mode, dimming mode to reduce output under low light
conditions and arrowbar modes.
Materials
The base is manufactured from anodised extruded aluminium,
lenses are moulded in strong UV stabilised polycarbonate.
Fixing
Various mounting kits are available in including moulded rubber,
adjustable permanent mounts and hook kits. To maintain
ingress protection, mounting kits attach simply and securely to
the base extrusion without the need for additional drilling
See page 15 for more details.
Approvals
EC65 approved in blue, amber and red versions.
Dimensions (mm)
L - 429 - 1708 (17” - 75”)
D - 292
H - 57
Colour options available
Lens colours
Amber, blue, clear or red
Sign colours
White (opal)
LED colours (single Amber, blue, red, white or green
colour modules)
Also available as dual colour
modules.
H
L
D
Fitted Options
•
•
•
•
•
•
•
Illuminated centre sign.
10408, XE, XEM XED & 3751 LED modules
LED or halogen alley lights
LED or halogen take down lights
Arrowbar functions
Day / Night and cruise mode
Gatso light
See page 3 - 6 for more details of fitted options
15
lightbar mounting kits
9-000DK
45mmH Moulded permanent mount kit secured to vehicle and
lightbar via concealed fixing bolts for neat appearance.
Supplied as a pair of brackets
95-XHK
permanent mounting kit designed specifically for use with Xcess
and Xcess-P lightbars. Attaches to underside of lightbar extrusion
via simple but secure coachbolt fixings. Mounting feet have
adjustable angle to suit different vehicles.
95-LPK
Low profile mount kit for xcess and Xcess-P.
attaches to underside of lightbar with secure bolt fixing to
vehicle roof.
9-286LK levelling kit
Levelling assembly to work in conjunction with various Haztec
lightbar mount kits allowing the lightbar to be angled to
compensate for sloping vehicle roofs. Allows a mounting angle
adjustment of up to 12 degrees up or down. Supplied as a kit
of 2 brackets with all necessary fixing bolts, shown below with
9-000SBK mount (mount kit is ordered separately)
9-000-SOK levelling kit
Kit of 4 brackets designed to clamp onto a variety of modern
profile roof rails. Rail mounting bolts slide into lightbar extrusion
and when tightened secure the clamp against the rail.
16
lightbar mounting kits
Lightbar mounting kits perform the vital task of securing the
lightbar to the vehicle body.
Xpert, Xpert DX, Xpert SL, Xtreme,Xtra, XH50 and Xpress lightbars
have a continuous channel in the underside of the extruded
base. The mounting bolts are free to slide along the length of this
channel whilst being securely retained in the lightbar extrusion
allowing them to be moved to align with the fixing holes.
Haztec offers a wide range range of lightbar mount kits allowing
different fixing possibilities to suit particular applications.
9-000BK / 9-000XPBK
9-000SBK / 95-SBK
9-000HK
9-000PK
A simple permanent mount kit consisting of 4 x 20mmH heavy
duty rubber spacing adaptors that mount between the vehicle
and the bar. Kit is supplied with mounting bolts that fix through
the centre of the spacing adaptor.
Stainless steel hook on mounting kit - avoids the need to drill
mounting holes in the vehicle.
Consists of a Z bracket that fixes to the lightbar and two separate
clamps to fix against the door aperture. clamps and Z brackets
are are held together by a bolt and locknut (supplied) Z bracket
supports the lightbar weight against the roof, whilst the clamps
secure the lightbar in position.
9-000HPK
Permanent mount high rise stainless steel mounting kit. Raises
lightbar profile by 130mm to help prevent obscuration.
Fixes vehicle via 2 bolts, kit includes protective rubber strip to
prevent direct contact with vehicle finish.
Heavy duty solid moulded rubber mounting kit consisting of 2
x 41mmH rubber mounts and 4 mounting bolts. Mounting bolt
heads are inserted into the lightbar base extrusion and bolted to
the vehicle. slotted holes in mounts assit with simple alignment
with fixing holes.
Permanent mount heavy duty stainless steel mounting kit. Raises
lightbar profile by 65mm to help prevent obscuration.
Fixes to vehicles via 2 bolts on each bracket, kit includes substantial protective rubber spacer to prevent direct bracket contact
with vehicle finish and to stop lightbar from sliding under wind
pressure
9-000RK
permanent mount roof rail fixing kit. consists of 4 metal brackets each supplied with 2 heavy duty coachbolts and locknuts.
Designed to secure the lightbar to roof rails (roof rail fixings not
included) Coachbolt head inserts into lightbar extrusion base
and slides along full length for ease of fixing.
17
roof mount connector
• Rugged weatherproof connector
• Quick release locking mechanism
• Right angled socket to minimise height requirements
The 9-0008 & 9-0012 weatherproof right angled connectors are
ideally suited for use on vehicles to provide a simple means of
powering equipment that may need to be removed.
The connector consists of a low profile right angled fixed socket
- ideal for mounting on a vehicle and a male plug designed to be
fitted to a wiring loom.
2 versions are available, an 8 pin and an 12 pin. All pins in both
versions are rated at 10A / 12V or 24V DC with a maximum
cable size of 1.5mm.
A locking mechanism is included to ensure both parts remain
securely joined when in operation but can be easily separated
without the need for any tools when required.
Normally both parts of the connector are supplied pre-fitted, to
the wiring loom, it is therefore necessary to specify the required
wire length between the lightbar and the loose part of the
18
Dimensions (mm):
Socket: 55L x 40H x 40D
Plug: 55L x 25H x 25D
Order code Description
9-0008
8 Pin Quick release connector pre-fitted to
lightbar loom 10A max per pin.
9-0008-PL 8 Pin Quick release connector with push
lock wire connections (supplied loose for
customer fitting.
9-0012
12 Pin Quick release connector pre-fitted
to lightbar loom.
9-00-MP
Blank plug to protect socket from ingress
during maintenance etc.
connector. (see diagram)
As an alternative, special versions of the 8 Pin type can be
supplied as separate loose items. This version allows the
installer to cut the loom at the desired point and then fit the
connector. These special versions utilise push lock terminations
allowing the user to fit the connector without needing any
specialist tools.
A gasket is provided to help seal between the right angled
socket and the vehicle.
Because of the 1.5mm cable / 10A max limit per pin, In some
cases it will be necessary to supply a special loom with multiple
negative wires and this should be considered when calculating
the required number of pins. Please discuss with technical sales
if required.
Please specify this
length when ordering
non push lock versions
W W W.HA ZTEC.UK
Haztec International Limited
Moorfield Estate, Leeds LS19 7BN, England
T: +44 (0)113 202 9115 F: +44 (0)113 202 9158
E mail: [email protected] - www.haztec.uk
V5.5