Agenda - Additive Manufacturing Users Group
2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of January 22, 2015 R! Pre-‐Registracon Required H! Hands-‐on Training Sunday, April 19, 2015 7:30am 8:00am 8:30am Location SME Additive Manufacturing Certificate Program Pre-‐Registration Required Additional Cost for SME Course | $250 includes course review and test (special AMUG member pricing) This sessions is managed and provided by SME Review Course: Sunday, April 19, 9:00am-‐1:00pm Test is Friday: Friday, April 24, 8:30am -‐ 12:00pm Duration Speakers R! SME, in cooperation with the Milwaukee School of Engineering (MSOE) and America Makes, has established a team of advisors who have strategically defined the additive manufacturing body of knowledge. This body of knowledge will serve as the basis for the Additive Manufacturing Certification Program, which includes a 4-‐hour review course, and a 4-‐hour exam. 9:00am -‐ 1:00pm Information regarding the Certification Program, Testing and Costs can be found at http://www.sme.org/rtam-‐certificate-‐program/ Clearwater 4hrs SME Registration 2nd Floor 5hrs AMUG Board and Volunteers Clearwater 30min AMUG Board NOTE: -‐ Pre-‐Registration is REQUIRED -‐ Additional costs apply to the Certification Review Course and Test -‐ SME is offering a discount to AMUG members for the Certification Review Course and Test at the AMUG Conference -‐ The SME Certification Course is separate from the AMUG Conference and payment for the certification program cannot be combined with the AMUG Conference registration payment -‐ Participants can choose to just take the Review Course, or both the Review Course and Test -‐ Certificates are provided by SME to those that pass the test on Friday -‐ Participants are required to bring a laptop with Wi-‐Fi capability to complete the test on Friday. Laptops will not be provided. 1:00pm -‐ 4:30pm CONFERENCE REGISTRATION Opens @ 1:00pm Closes @ 6:00pm 4:30pm Registration 2nd Floor NEW MEMBER WELCOME If this is your first time at AMUG, we invite you to join us for the New Member Welcome and Overview. The AMUG Board will review what you need to know and what you can expect from the conference. AMUGexpo and Student Poster Session (5:00pm-‐10:00pm) AMUGexpo is open to all AMUG registered conference attendees 5:00pm -‐ 10:00pm *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda The AMUGexpo takes place Sunday and Monday night at the AMUG Conference The venue brings together OEMs, vendors and suppliers (such as software, AM materials, ancillary equipment, post-‐processing, scanners, service bureaus, etc.) in one location to engage with the AMUG Conference attendees. Sunday night includes a Student Poster Session Complimentary Food and Beverages Register today at www.am-‐ug.com Page 1 Grand Ballroom and Foyer 2nd Floor 5hrs Discover new services, materials, systems, and peripherals. Complimentary food and beverages. Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of January 22, 2015 R! Pre-‐Registrafon Required H! Hands-‐on Training Monday, April 20, 2015 Registration (7:00am -‐ 8:00am) -‐ 2nd Floor Continental Breakfast (7:00am -‐ 8:00am) -‐ Gand Ballroom Foyer, 2nd Floor 7:00am -‐ 7:30am 8:00am 8:30am 9:00am 9:30am 10:00am 10:30am 11:00am AMUG Welcome by AMUG President 2015 AMUG Welcome and Conference Overview, Scholarship Awards, AMUG Updates 11:30am 2014 Technical Competition Winners | Advanced Concept Winner -‐ Reebok, Checklight and Advanced Finishing Winner -‐ CIDEAS, The Perfect Choice KEYNOTE ADDRESS | Todd Grimm, T.A. Grimm & Associates, Inc. Location Time Speakers Grand Ballroom 4/5 1hr Mark Barfoot Grand Ballroom 4/5 1 hr Todd Grimm Grand Ballroom 4/5 Grand Ballroom 4/5 30min 30min Grand Ballroom 4/5 30min TBA TBA Gary Rabinovitz Mike Littrell Break (10:00am -‐ 10:30am) Diamond Sponsor General Session Address | Stratasys Diamond Sponsor General Session Address | Somos Networking Lunch (12:00pm -‐ 1:30pm) River Deck 2 12:00pm -‐ 1:30pm SESSIONS START PROMPTLY @ 1:30pm TRACKS METALS MEDICAL SCANNING CONCEPT TO PART WORKSHOPS SOFTWARE WORKSHOPS Location Conference Center A Clearwater St Johns River Terrace 2 River Terrace 3 Daytona 1:30pm -‐ 2:00pm 3D Printing and Its Evolving Role in the Development and Manufacture of Complex Laser AM at the Royal 3D Printing Parts Without Medical Devices; Canadian Navy Dockyard a 3D CAD Model 3D Printing at Caterpillar The Continuous Flow Total Matthew Barnett, Dept. of Dan Perreault, NeoMetrix Jim Lahood, Catepillar Artificial Heart National Defence, Canada Technologies William Cohn, Texas Heart Institute at Baylor St. Luke's Medical Center Magics Basic Class by Materialise 2:00-‐2:15 2:15pm -‐ 2:45pm R! H! H Hydrographic Printing Ed Tackett, RapidTech Pre-‐Registration is required Seating is limited (1 hour) Contact Abbey Delaney [email protected] +1 (734) 259-‐7030 Class Time: 1:30pm-‐3:00pm Validating Additive Design Faster and Lighter: Design, Analysis, & Testing Additive Technology Enhancing Manufactured Parts Using Applications of Topology of Printed Front Knuckle for Product Development Industrial Computed Optimization in Additive Collegiate Baja Car Rich Mitchell, Chris Brockman, Tomography (CT) Scanning Manufacturing Patrick Gannon, rp+m Stryker Instruments Fabio Visentin, JG&A Jaideep Bangal, Metrology solidThinking DIAMOND & PLATINUM SPONSOR SESSIONS STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ExOne: Various Casting Medias, Grand Ballroom 7 EOS of North America, Grand Ballroom 8 STRATASYS, Grand Ballroom 3, STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ACT Group, Grand Ballroom 7 Prodways, Grand Ballroom 8 ALL SESSIONS IN GRAND BALLROOM END 2:45pm -‐ 3:15pm Break (2:45pm -‐ 3:15pm) TRACKS METALS MEDICAL SCANNING TRANSPORTATION WORKSHOPS Location Conference Center A Clearwater St Johns River Terrace 2 River Terrace 3 3:15pm -‐ 3:45pm Metals: Not Just for Prototypes – Real Parts for Real Applications Bob Henderson, Linear Mold & Engineering Additive Manufacturing in Regenerative Orthopedics Dr. Yaser Shanjani, Ph.D., Stanford University SOFTWARE WORKSHOPS Daytona H! R! H! DeltaWing Racing with On-‐ Product Development 3.0 Track AM Intake Manifold Emilie Grenier, Creaform Stewart Davis, CRP USA 3:45-‐4:00 TRACKS 4:00pm-‐ 4:30pm Magics Advanced Class by Materialise LASER SINTERING Microstructural & Residual FDA Challenges When High Speed Sintering: The Stress Behavior in AM Developing New Materials for Scan to Print vs. Next Generation for Metals Additive Manufacturing Scan to CAD Additive Manufacturing Amanda Wu, Lawrence Dr. Albert Rego, Ph.D., MedTech Roman Walsh, SpaceClaim Neil Hopkinson, University Livermore National Review of Sheffield Laboratory Silicone Molding Workshop Part 1 Pre-‐Registration is required Seating is limited Joel Charbonean, Innovative Polymers Contact Abbey Delaney [email protected] +1 (734) 259-‐7030 4:30-‐4:45 TRACKS 4:45pm-‐ 5:15pm Diamond or Platinum Sessions will not be offered after the BREAK. All Ballrooms will be closed for AMUGexpo preparation. Class Time: 3:15pm-‐4:45pm AEROSPACE A Comparison Between Software Validation for Reverse LAMP and SLE -‐ Disruptive Powder Bed and Power Fed Automated Processes -‐ Additive Engineering/Inspection AM Technologies for Processes for 3D Printed Manufacturing with a ROMER Arm Turbine Engine Hot-‐ Metals John Beasley, RAC (US) MedTech Matt Hall, Hexagon Section Components Richard Grylls, Optomec Review Metrology Suman Das, DDM Systems Sessions End 5:15pm 5:15pm 5:30pm 6:00pm -‐ 10:00pm AMUGexpo and Technical Competition Location: Grand Ballroom and Foyer 2nd Floor Time: 6:00pm -‐ 10:00pm AMUGexpo continues. Discover new services, materials, systems and peripherals. Complimentary food and beverage. Technical Competition provides a forum for users of additive manufacturing technologies to display their unique applications and finishing capabilities. *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda Register today at www.am-‐ug.com Page 2 Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of January 22, 2015 R! Pre-‐Registraeon Required H! Hands-‐on Training Tuesday, April 21, 2015 7:00am -‐ 7:30am 8:00am 8:30am 9:00am AMUG Announcements Registration (7:00am -‐ 8:00am) -‐ 2nd Floor Continental Breakfast (7:00am -‐ 8:00am) -‐ Gand Ballroom Foyer, 2nd Floor Location Speakers Grand Ballroom 4/5 Time 30min KEYNOTE ADDRESS | Lonnie Love, Ph.D., Oak Ridge National Laboratory Grand Ballroom 4/5 1hr Lonnie Love 9:30am EU Ambassador Update Grand Ballroom 4/5 30min Graham Tromans / Stefan Ritt 10:00am 10:30am 11:00am 11:30am Diamond Sponsor General Session Address | Concept Laser Diamond Sponsor General Session Address | SLM Solutions Diamond Sponsor General Session Address | GE Grand Ballroom 4/5 Grand Ballroom 4/5 Grand Ballroom 4/5 30min 30min 30min TBA TBA TBA Mark Barfoot Break (10:00am -‐ 10:30am) Networking Lunch (12:00pm -‐ 1:30pm) River Deck 2 12:00pm -‐ 1:30pm SESSIONS START PROMPTLY AT 1:30pm TRACKS METALS AEROSPACE BUSINESS CONCEPT TO PART SOFTWARE WORKSHOPS Location Grand Ballroom 4 Grand Ballroom 5 St Johns River Terrace 3 Daytona 1:30pm -‐ 2:00pm 3D Printing Luxury: 3D Printing in Precious Metals Rootesh Shah, Innovarium Justification and Additive Manufacturing for Considerations for Bringing Aerospace Components In AM Technology Brian Thompson, GNK Mark Barfoot, Hyphen Aerospace North America Services, Todd Grimm, Grimm & Associates 2:15pm -‐ 2:45pm STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 Hewlett Packard, Grand Ballroom 7 Renishaw Engineering: Metals AM for the Production Environment, Grand Ballroom 8 Comparing and Testing Materials Brian Slocum, Lehigh University 2:00-‐2:15 TRACKS DIAMOND & PLATINUM SPONSOR SESSIONS AM vs. Conventional Applications, Process and Manufacturing in Cubesat Material Development Applications for DMLS Geovanni Solorzano, Embry-‐ Matt Garrett, Integrated 3D Riddle Aeronautical LLC University WORKSHOPS H! Financing 3D Printers and AM Technology Charlie Norton, NCP Leasing STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ExOne, Grand Ballroom 7 EOS of North America, Grand Ballroom 8 2:45-‐3:00 3:00pm -‐ 3:30pm DMLS Data Preparation Al Burchi / Jalel Nadji, EOS of North America / Materialise (1 hour) 3:30pm-‐ 4:00pm SLM Fundamentals and Silicone Molding Workshop Applications for Rocket IP Update Part 2 Engine Manufacturing John Hornick, Finnegan, Youping Gao, Ken Simpson, Henderson, Farabow, Garnett Joel Charbonean, John Malinzak, and Jeff & Dunner LLP Innovative Polymers Haynes, Aerojet Rocketdyne STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ACT Group, Grand Ballroom 7 Prodways, Grand Ballroom 8 Additive Manufacturing Activity at University of Cincinnati, Dr. Sam Anand, Dustin Lindley, University of Cincinnati Research Inst. STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 Hewlett Packard, Grand Ballroom 7 Renishaw Engineering, Grand Ballroom 8 The Wall Street Side of 3D Printing Troy Jensen, Piper Jaffray Sessions End 4:00pm 4:00pm 4:30pm 5:15pm 5:30pm 6:00pm 6:30pm 7:00pm 7:30pm 8:00pm 8:30pm 9:00pm 9:30pm Buses leave at 5:15pm 2015 AMUG Dinner & Awards Banquet Location: It's a surprise! Transportation will be provided. All attendees of the AMUG Dinner and Awards Banquet are required to take the bus provided by AMUG. Please wear comfortable clothing and closed-‐toe shoes -‐ jeans and tennis shoes are ok! Please do not bring laptops or items that may need to be stored. Location of the Dinner and Awards banquet could be inside...could be outside...could be both! 10:00pm *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda Register today at www.am-‐ug.com Page 3 Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of January 22, 2015 R! Pre-‐Registracon Required H! Hands-‐on Training Wednesday, April 22, 2015 7:30am 8:00am 8:30am 9:00am 9:30am 10:00am 10:30am 11:00am 11:30am Continental Breakfast (7:30am -‐ 8:30am) AMUG Updates The Innovators Showcase Join us for a one-‐on-‐one interview with Chuck Hull, Inventor of Stereolithography Location Grand Ballroom 4/5 Speakers Mark Barfoot Time 30 min Grand Ballroom 4/5 1 hr Chuck Hull / Todd Grimm Grand Ballroom 4/5 1.5 hr AMUG Board Break (10:00am -‐ 10:30am) AMUG Business Meeting -‐ Open to ALL AMUG Attendees AMUG Board: AMUG Board Updates, Financial Updates, Officer Elections Networking Lunch (12:00pm -‐ 1:30pm) River Deck 2 12:00pm -‐ 1:30pm Sessions start promtply at 1:30pm TRACKS METALS EDUCATION LASER SINTERING CASTING SOFTWARE WORKSHOPS Location Grand Ballroom 4 Grand Ballroom 5 St Johns River Terrace 3 Daytona Further Insights in the Nature of 'Orange Peel' Felipe Amado, Manfred Schmid, Inspire AG, irpd The Use of Additive Manufacturing in the Sand Foundry John Danko, Danko-‐ Arlington H! 1:30pm -‐ 2:00pm Design for Economical Metal A New Design Aesthetic and Additive Manufacturing the Future of Additive Steve Woods, GE Power and Manufacturing Water Advanced Robert Gerritsen, Mohawk Manufacturing Works College DIAMOND & PLATINUM SPONSOR SESSIONS STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ExOne, Grand Ballroom 7 EOS of North America, Grand Ballroom 8 2:00-‐2:15 2:15pm -‐ 2:45pm STRATASYS, Grand Ballroom 3, STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ACT Group, Grand Ballroom 7 Prodways, Grand Ballroom 8 DMLM – It is Rocket Science – The Impact of FDM on The Next Generation Engineering Student Design Designing for SLS Dennis Butenschoen, GPI Choices Tharwat Fouad, Anubis3D Prototype & Manufacturing Cassandra Gribbins, Embry-‐ Services Riddle Aeronautical University 2:45pm -‐ 3:15pm Break TRACKS METALS EDUCATION LASER SINTERING CONCEPT TO PART SOFTWARE WORKSHOPS Location Grand Ballroom 4 Grand Ballroom 5 St Johns River Terrace 3 Daytona Designing for the DMLS Process David Bentley, Proto Labs -‐ Fineline Additive Services How Predictive Simulations will Change the Additive Manufacturing Playing Field Brent Stucker, University of Louisville 3:15pm -‐ 3:45pm SLS Build Preparation and Setup for Beginners Jordan Weston, Chris Heinze, MSOE 3:45-‐4:00 4:00pm-‐ 4:30pm R! H! Additive Manufacturing: Improving the Care of our Wounded Warriors Peter Liacouras, PhD, Walter Reed National Military Center AM -‐ Surface Finishing Trials & Tribulations of AM Technologies Training Development Steven Alviti, Bel Air Finishing Paul Parzuchowski, Linear Supply Mold & Engineering Mimics Training by Materialise Pre-‐Registration is required Seating is limited Contact Abbey Delaney [email protected] 1 (734) 259-‐7030 Jigs and Fixtures Scott Plier, MSOE Class Time: 3:15pm-‐5:00pm DIAMOND & PLATINUM SPONSOR SESSIONS STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 Hewlett Packard, Grand Ballroom 7 Renishaw Engineering, Grand Ballroom 8 STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ExOne, Grand Ballroom 7 EOS of North America, Grand Ballroom 8 4:30-‐4:45 4:45pm-‐ 5:15pm Customized Mass-‐Production From Prototyping to Series -‐ Hybrid Parts Using Additive Production – Additive Manufacturing and Manufacturing of Aluminum Injection Molding Components, Andreas Berkau, Soeren Griessbach, University citim AM Inc. of Applied Science Zwickau 5:15pm 5:30pm 6:00pm 6:30pm 7:00pm 7:30pm 8:00pm 8:30pm 9:00pm 9:30pm TBA Christopher Johnson, Northern Arizona University Comparison of Methods to Add Electronic Functionality to 3D Plastic Parts Ken Vartanian, Optomec STRATASYS, Grand Ballroom 3, STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ACT Group, Grand Ballroom 7 Prodways, Grand Ballroom 8 Sessions End 5:15pm Pizza Night and Networking Event Location: River Deck 2 6:00pm -‐ 10:00pm 10:00pm *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda Register today at www.am-‐ug.com Page 4 Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of January 22, 2015 R! Pre-‐Registrabon Required H! Hands-‐on Training Thursday, April 23, 2015 7:30am 8:00am 8:30am 9:00am 9:30am 10:00am Continental Breakfast (7:30am-‐8:30am) AMUG Conference Feedback Session and Closing KEYNOTE ADDRESS | Jason Lopes, Legacy Effects Location Grand Ballroom 4/5 30min Time Speakers Mark Barfoot Grand Ballroom 4/5 1 hr Jason Lopes Break (10:00am -‐ 10:30am) TRACKS GENERAL AEROSPACE EDUCATION CASTING Location Grand Ballroom 4 Grand Ballroom 5 River Terrace 2 River Terrace 3 DIAMOND & PLATINUM SPONSOR SESSIONS R! H Advanced Aerospace Materials for ASTM F42 Committee on Standards Additive Manufacturing Maturation for Additive Manufacturing -‐ Update Brian Czapor, Univ. Of Dayton Carl Dekker, Met-‐L-‐Flo Research Institute 10:30am 11:00am ISO Certification. What does ISO Certification Mean for You? Carl Dekker, Met-‐L-‐Flo TRACKS CONCEPT TO PART Design for Additive Manufacturing -‐ DMLS -‐ The Designers Mindset Chris McKee, COM DEV Ltd. Foundry in a Box Steve Murray, Jack Ziemba Cracking the Code to Production in Art of Hybrid Manufacturing: AM: How Linear is Addressing Combining Additive and Production in Aerospace Subtractive Manufacturing Brandy Badami, Linear Mold & Mike Panzarella, DMG Mori ASI Engineering Inc. 1.5hours please arrive early Limit 50 -‐ sign up on-‐site H! Post Processing Techniques Dan Hutchinson, Post Process 11:30am Part 1 Increasing Production Throughput with Electron Beam Melting for the Aerospace Components Frank Medina, Arcam Why Does the Additive Manufacturing Industry Need Training? Paul Bates, UL STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 Hewlett Packard, Grand Ballroom 7 Renishaw Engineering, Grand Ballroom 8 ! STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ExOne, Grand Ballroom 7 EOS of North America, Grand Ballroom 8 STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ACT Group, Grand Ballroom 7 Prodways, Grand Ballroom 8 Networking Lunch (12:00pm -‐ 1:30pm) River Deck 2 12:00pm -‐ 1:30pm SESSIONS START PROMPTLY AT 1:30pm TRACKS CONCEPT TO PART AEROSPACE WORKSHOP CASTING Location Grand Ballroom 4 Grand Ballroom 5 River Terrace 3 River Terrace 2 H! Post Processing Techniques Dan Hutchinson, Post Process 1:30pm -‐ 2:00pm Part 2 2:00-‐2:15 H! Additive Manufacturing for Fleet Readiness Doug Greenwood, Justin Reynolds, Robert Kestler, NAVAIR FRC East AM Technologies Solutions in the Investment Casting Industry -‐ Emphasis on Turbo-‐Machinery, Pump & Valve and Oil Field Applications Mike Hascher, Eagle Engineered Solutions Hydrographic Printing Ed Tackett, RapidTech LASER SINTERING Impact of PUSH Post-‐Processing on Properties of Laser-‐Sintered Nylon 12 Nathan Crane, The University of South Florida Manipulation and Characterization of Armstrong Ti and Ti-‐6AI-‐4V Powders for AM Yingying Sun, RMIT University & CSIRO TRACKS TRANSPORTATION AEROSPACE CASTING Location Grand Ballroom 4 Grand Ballroom 5 River Terrace 2 The "Acceleration" of Productivity Mark Bringle, Joe Gibbs Racing Development of 3D Model for Cold Spray Additive Manufacturing Muhammad Faizan-‐Ur-‐Rab, Swinburne University of Technology / CSIRO SCANNING TRACKS 2:15pm -‐ 2:45pm Changing the Way Parts are Made -‐ Disrupting Traditional Manufacturing Methodologies Bill Dahl, Solidscape, Inc. 2:45pm -‐ 3:15pm 3:15pm -‐ 3:45pm (1 hour) DIAMOND & PLATINUM SPONSOR SESSIONS STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 Hewlett Packard, Grand Ballroom 7 Renishaw Engineering, Grand Ballroom 8 STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ExOne, Grand Ballroom 7 EOS of North America, Grand Ballroom 8 Break Casting the Future Jack Ziemba, Aristo-‐Cast, Inc. DIAMOND & PLATINUM SPONSOR SESSIONS STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 ACT Group, Grand Ballroom 7 Prodways, Grand Ballroom 8 3:45-‐4:00 TRACKS H! 4:00pm-‐ 4:30pm 4:30-‐4:45 4:45pm-‐ 5:15pm Bobble-‐Head from Concept to Design Carlos Bolanos, Gary Rabinovitz, Reebok Hands-‐on Scanning: From Scan to Bobble Head (scan to software then print, and cleaning) Microstructure Development of CoCr Super Alloy for EBM Additive Manufacturing Stefan Gulizia, CSIRO Additive Manufacturing for Commercial Space Applications Diane Burchett, COM DEV Ltd. 5:15pm 5:30pm 6:00pm -‐ 10:00pm *Speakers and times are subject to change 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda Casting TBA David Tait, voxeljet STRATASYS, Grand Ballroom 3 STRATASYS, Orlando SOMOS, Grand Ballroom 6 CONCEPT LASER, Grand Ballroom 2 SLM Solutions, Grand Ballroom 1 GE, Board Room 4 Hewlett Packard, Grand Ballroom 7 Renishaw Engineering, Grand Ballroom 8 3D Sand Printing for Your Metal Casting Needs Steve Murray, Hoosier Pattern Sessions End 5:15pm BBQ Dinner and Closing (6:00pm -‐ 10:00pm) Location: TBA Come help us celebrate and close out the 2015 AMUG Conference Register today at www.am-‐ug.com Page 5 Questions? Email info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users 2015 Additive Manufacturing Users Group 27th Annual Education & Training Conference Sunday, April 19 -‐ Thursday, April 23, 2015 Hyatt Regency Jacksonville Riverfront | Jacksonville, FL Preliminary Agenda as of January 22, 2015 R! Pre-‐Registra^on Required Friday, April 24, 2015 7:30am 8:00am Location Duration Clearwater 3.5 hours H! Hands-‐on Training Speakers R! SME Additive Manufacturing Certificate Program Pre-‐Registration Required Additional Cost for SME Course | $250 includes course review and test (special AMUG member pricing) This sessions is managed and provided by SME Information regarding the Certification Program, Testing and Costs can be found at http://www.sme.org/rtam-‐certificate-‐program/ 8:30am -‐ 12:00pm NOTE: -‐ Pre-‐Registration is REQUIRED -‐ Additional costs apply to the Certification Review Course and Test -‐ SME is offering a discount to AMUG members for the Certification Review Course and Test at the AMUG Conference -‐ The SME Certification Course is separate from the AMUG Conference and payment for the certification program cannot be combined with the AMUG Conference registration payment -‐ Participants can choose to just take the Review Course, or both the Review Course and Test -‐ Certificates are provided by SME to those that pass the test on Friday -‐ Participants are required to bring a laptop with Wi-‐Fi capability to complete the test on Friday. Laptops will not be provided. 12:00pm 12:30pm 1:00pm 1:30pm 2:00pm 2:30pm 3:00pm 3:30pm 4:00pm 4:30pm 5:00pm 5:30pm 6:00pm 6:30pm 7:00pm 7:30pm 8:00pm 8:30pm 9:00pm 9:30pm 10:00pm *Speakers and times are subject to change. 2015 Additive Manufacturing Users Group -‐ Preliminary Agenda SME Register today at www.am-‐ug.com Page 6 Questions? info@am-‐ug.com The Additive Manufacturing Conference For Users, By Users
© Copyright 2024