COMPONENTS FOR HD FIBRE INSTALLATIONS Each and every HD fibre infrastructure has different requirements and budgets, but above all requires ease of installation. For this reason LEMO UK has prepared a range of components and kits to enable customers to select those which most closely meet their needs. The use of modern splicing equipment provides a fast and reliable means of installing HD fibre links in fixed locations. There are many means of achieving a suitable termination of panel mount connectors in installations, from a simple termination to a fully replaceable junction. Alternatively, if the conditions permit, complete cable assemblies can be prepared in the factory environment and installed using the LEMO cable puller. This leaflet gives an indication of the scope of supply - other bespoke customer requirements can be accommodated as required. COMPONENTS FOR HD FIBRE INSTALLATIONS Hardwired single junction kit Simple hardwired single junction kit typically for wallbox application where there is very little space. Part number for complete kit: UKE.0528.FXW.3K.01 Customer supplies wall panel and installed cable. It is best to ensure approximately 2m of the spare cable at the wallbox for the purposes of termination. Patchcord is cut in half and spliced directly to the installed cable. Electrical conductors of the installed cable are terminated directly to the LEMO connector. Component description Quantity per kit Part Number LEMO panel plug connector including crimp electrical contacts 1 FXW.3K.93C.TLM LEMO F2 - LEMO F2 fibre patchcord to fit above connector 1 UKF.F2.A93.000100 Splice cassette 1 UKT.0000733 Other connectors Panel socket connector including crimp electrical contacts Part Number EDW.3K.93C.TLC Bulkhead socket connector including crimp electrical contacts PEW.3K.93C.TLCT96Z Alternative kit with “EDW” connector UKE.0528.EDW.3K.01 Alternative kit with “PEW” connector UKE.0528.PEW.3K.01 LEMO 3K.39C panel connectors with tails LEMO 3K.93C panel connectors with tails, either for use with boxes as described below, or other customer-defined use. Component description Part Number FXW.3K.93C.TLM with 0.5m bare end electrical and fibre tails UKF.3K.B59.000050 FXW.3K.93C.TLM with 0.5m electrical and fibre tails terminated to SC’s and standard 6-way electrical connector for use with boxes below UKF.3K.B60.000050 EDW.3K.93C.TLC with 0.5m bare end electrical and fibre tails UKF.3K.B61.000050 EDW.3K.93C.TLC with 0.5m electrical and fibre tails terminated to SC’s and standard 6-way electrical connector for use with boxes below UKF.3K.B62.000050 Boxed junctions for wallbox applications Boxed junction typically for wallbox application where space is more readily available, suitable for up to 5 installed HD cables. Supplied with cable fixing points and fibre connectors with tails for splicing. Allows for easy replacement of panel connectors or fibre tails. Select from above the required number of panel connectors with tails to complete the kit. Customer supplies wall panel and installed cable(s). It is best to ensure approx 2m of spare cable for termination. The cable is terminated within the junction box, by splicing of fibres and crimping to standard 6-way electrical connector electrical connectors, the LEMO panel connector is mounted to the wall panel and the tail connectors are plugged into the junction box. Component description Part Number Box for 1 HD cable UKE.0528.WBX.3K.01 Box for 2 HD cables UKE.0528.WBX.3K.02 Box for 3 HD cables UKE.0528.WBX.3K.03 Box for 5 HD cables UKE.0528.WBX.3K.05 Integrated panel with splice tray and connector junctions Integrated panel with built in splice tray and connector junctions for use where space is limited, either at a wallbox or a patching unit. Up to 3 can be mounted side-by-side to fit in 3U rack dimensions. External connectors can be either panel plugs, for link to cameras, or panel sockets for links to CCU’s or OB van. Allows for easy replacement of external connectors or the fibre contacts if damaged in use. Customer supplies wall/ rack mounting plate and installed cable(s) - it is best to ensure approx 2m of spare cable for termination. Cable is terminated to the panel by splicing of fibres and crimping to standard 6-way electrical connectors. LEMO panel connector(s) and tails come ready fitted. Component description Part Number Panel with FXW.3K.93C.TLM for 1 HD cable UKE.0528.IFX.3K.01 Panel with FXW.3K.93C.TLM for 2 HD cables UKE.0528.IFX.3K.02 Panel with EDW.3K.93C.TLC for 1 HD cable UKE.0528.IED.3K.01 Panel with EDW.3K.93C.TLC for 2 HD cable UKE.0528.IED.3K.02 Rack mounted splice tray with connector junctions Rack mounted splice tray with connector junctions for patch unit. Can accommodate up to 10 LEMO connectors. Customer supplies rack and installed cable - allow 2m spare for termination. Cable is terminated to the tray by splicing of fibres and crimping to standard 6-way electrical connectors. LEMO panel connectors and internal tails come ready fitted. Component description Part Number Complete unit with FXW.3K.39C.TLM for 1 installed HD cable UKE.0528.STF.3K.01 Complete unit with FXW.3K.39C.TLM for 2 installed HD cables UKE.0528.STF.3K.02 Complete unit with FXW.3K.39C.TLM for 3 installed HD cables UKE.0528.STF.3K.03 Complete unit with FXW.3K.39C.TLM for 6 installed HD cables UKE.0528.STF.3K.06 Complete unit with FXW.3K.39C.TLM for 10 installed HD cables UKE.0528.STF.3K.10 Complete unit with EDW.3K.39C.TLC for 1 installed HD cable UKE.0528.STE.3K.01 Complete unit with EDW.3K.39C.TLC for 2 installed HD cables UKE.0528.STE.3K.02 Complete unit with EDW.3K.39C.TLC for 3 installed HD cables UKE.0528.STE.3K.03 Complete unit with EDW.3K.39C.TLC for 6 installed HD cables UKE.0528.STE.3K.06 Complete unit with EDW.3K.39C.TLC for 10 installed HD cables UKE.0528.STE.3K.10 Typical installation The schematic opposite is a typical HD layout showing where splicing can benefit the installation of a system. Also shown are abbreviations of LEMO connector models most commonly used in such applications (e.g. “FMW” = “FMW.3K.93C.TLM”). * CCU, Patching and floor cables can all be factory assembled for best results COMPONENTS FOR HD FIBRE INSTALLATIONS Other products available Cable assemblies Cable puller Factory terminated LEMO cables assemblies ready for installation consist of stainless steel LEMO connectors mounted to Furukawa cable and are fully tested to the highest standards to ensure reliable connectivity and dependable operation in the field. With an outside diameter of only 17.5mm the LEMO cable puller, temporarily replaces the outer shell of the connector. This pullthrough tool also ensures that the pulling force is applied directly to the central strength member of the cable, thereby protecting the optical fibres. Part number: DCS.3K.175.72.LN Pre-terminated contacts Field repair kit The F2 pre-terminated fibre optic contact was designed as a repair solution but may also be used for low use indoor fixed installations. LEMO offers a wide range of high quality accessories and tooling for field repair of fibre optic connectors and cable assemblies. Pre-terminated F2 male contact Part number: FFT.F2.BA2.LCE10 Pre-terminated F2 female contact Part number: PST.F2.BA2.LCE10 Components for plug repair: FUW.3K.93C.ZLMC96W Components for socket repair: PUW.3K.93C.ZLCC96W Field repair toolkit: DRV.91.3K9.3CPRET Patch cords Fibre patchcords provide any installer with the means to flexibly achieve a high quality installation of panel - or bulkhead-mounted connectors to installed cables/equipment. A range of LEMO patchcords is available as shown with a number of possible connections to other industry standard connectors. Alternatively the LEMO F2 to LEMO F2 patchcord can be cut in half for use in fibre splicing. The LEMO F2 contacts in the part numbers shown here all come with an alignment sleeve enabling use with both plugs or sockets (where male contacts are required the alignment sleeve can be retained as a spare). Component description For information on other HD Fibre products or connectors from LEMO, please visit our website www.lemo.co.uk LEMO UK Ltd Unit 15 & 16, Hazelwood Trading Estate, Worthing, West Sussex, BN14 8NP. Tel: 01903 234543 Fax: 01903 206231 e-mail: [email protected] www.lemo.co.uk Part Number LEMO F2 to FC/PC patchcords 1m long UKF.F2.A90.000100 LEMO F2 to SC patchcords 1m long UKF.F2.A91.000100 LEMO F2 to ST patchcords 1m long UKF.F2.A92.000100 LEMO F2 to LEMO F2 patchcords 1m long UKF.F2.A93.000100 LEMO F2 to SC patchcords 1m long UKF.F2.A94.000100
© Copyright 2024