AS200MY - Engineering Technology Group

Single Turret Milling and Turning Centre
AS200MY
Powerful milling and turning centre at a competitive cost.
»
»
»
»
»
»
»
»
»
»
Linear Guideways on all axes
+/- 41mm Y-axis
11/7.5kW spindle motor
Spindle speed 4500min-1, Driven-tool speed 6000min-1
Faster rapid traverse 24m/min for the X-axis,and 36m/min for the Z-axis
Bar capacity 65mm standard. 8” Chuck
All FANUC, CNC control and servo drives.
15 Station turret
Gearless Direct Belt Driven tools
Ultra Compact Footprint
General specification
General
Machine height
Floor space (L×W)
Machine weight
Capacity
Max. turning diameter
Max. turning length
Distance between centres
Bar capacity
Chuck size
1850mm
1650mm×1600mm
3200kg
340mm/280mm
300mm
427mm
65mm/71mm (op.)
8-inch
Technical specification
Axis travel
Slide travel (×)
Slide travel (Z)
Slide travel (Y)
Rapid feed (×)
Rapid feed (Z)
Rapid feed (Y)
Spindles
Spindle speed
Spindle speed range
Spindle nose
Hole through spindle
I.D. of front bearing
Hole through draw tube
227.5/212.5mm
320mm
±41mm (op.)
24m/min
36m/min
6m/min
0 - 4500min-¹
Stepless
A2-6
80mm
110mm
66mm 71mm (op.)
Technology
C-axis
Least input increment
Least command increment
Rapid index speed
Cutting feed rate
C-axis clamp
C-axis connecting time
Turret
Type of turret head
Number of Tool stations
Number of Indexing positions
Tool size (square shank)
Tool size (round shank)
0.001°
0.001°
600min-¹
1 - 4800°/min
Disk clamp
1.5sec.
Dodecagonal drum turret / 15 station turret
24/15
24/15
□ 20mm, □ 25mm
Ø 32mm
WWW.ENGTECHGROUP.COM/NAKAMURA
TEL 01926 818 418 FAX 01926 818 414 [email protected]
TURNING TECHNOLOGIES LTD
RHODES HOUSE, NORTHFIELD ROAD, SOUTHAM, CV47 0FG
© Engineering Technology Group Ltd. No part of this literature may be reproduced without permission.