1. science
2. physics
3. hydraulics

Brakes & Brake Master Cylinder
Prices subject to change
Co
Brake
Co
1916-36
Line Armor Spring
8.25/Ft.
BRK-0009, BRK-0010, BRK-0011
Continuous wound stainless steel
spring stock to armor brake pipes on
Bugatti and other French cars of the
1930's such as Delage and Peugeot.
Three sizes available. Please inquire
for current inventory of available
lengths.
BRK-0009
For use with 5/16 pipe; .043 wire, .375
OD
BRK-0010
For use with 1/4 pipe; .032 wire; .312
OD
BRK-0011
For use with 1/4 pipe; .020 wire; .295
OD
Co
Heavy
Wall Copper Tubing for Brakes
5.50/FT.
J-4836, J-4869, J-4821
Heavy wall copper tubing for use in
brakes. Three sizes available: J-4836
1/4 x .065 wall; J-4869 5/16 x .065
wall; J-4821 3/8 x .065 wall
Co
1938
Packard V-12 Brake Shoe Tension Spring
$9.00
P-0062
Brake shoe tension spring for 1938
Packard V-12, may also fit other years
and models. Packard part number
234839.
Wire is .062 Dia, .380 OD and 3.82
OAL.
Co
1929-30
Packard Brake Shoe Anti-Rattle Spring
$58.75
P-0109
Brake shoe anti-rattle spring for use
on 1929 - 1930 Packard.
Cadillac LaSalle Brake & Clutch Pedal
Return Spring
$25.75
CAD-0093
Brake and clutch pedal return spring
for use on the following years and
models of Cadillac and LaSalle:
Cadillac
1916-17 V8 55; 1917-19 V8 57; 192021 V8 59; 1921-23 V8 61; 1923-25 V8
63; 1925-27 V8 314; 1927-29 V8 341;
1929-30 V8 353; 1930-35 V8 355;
1930-35 V12 370; 1930-35 V16 452;
1936 V16 36-90
LaSalle
1927-28 303; 1928-29 328; 1929-30
340; 1930-33 345
Cadillac part number 32513, group
numbers 5.0362 and 4.4222
Material: Steel; Finish: Natural; OD:
.637; Number of coils: 48; Coil length:
3.9375; Wire: .075; Hook: 1.325 x
1.063 x .125
Co
Cord
L-29 Clutch & Brake Pedal Return Spring
Bracket
$6.00
COR-0029
Laser cut steel bracket to attach the
clutch and brake pedal return springs
on Cord L-29.
Material: Steel; OAL: 1.140; Large OD:
.750; Small OD: .259; Large ID: .460;
Small ID: .150; Thickness: .0478
Co
1935-37
Packard Secondary Brake Shoe Return
Spring
$5.25
P-0177
Steel return spring used on 1935 1937 Packard V12 and Super 8.
Connects the secondary brake shoe to
the bracket. Packard part number
304879, "Brake shoe (secondary) to
bracket spring". Quantity of four used
per car.
Material: Steel; OD: .583; OAL: 2.150;
Coil length: .875; Long hook length:
.9375; Short hook length: .407; Wire:
.081
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
1
Brakes & Brake Master Cylinder
Prices subject to change
Co
Cord
L-29 Brake & Clutch Pedal Spring
Co
1/2-20
Banjo Brake Line Fitting
$15.50
COR-0028
Brake and clutch pedal return spring
for use on Cord L-29.
Cord part number C2-5007.
$51.50
BRK-0001
Banjo fitting with 1/2-20 thread for use
on Pegaso, Ferrari and many other
European cars.
Material: Steel; OAL: 19.00; Coil
length: 6.375; Coil OD: .555; Wire:
.062; Hook length: .750
Measures: 1.586 OAL, ball end is .670
OD, ID of cylinder is 1/2-20 thread with
a .156 hole into the ball end. Black
oxide finish.
Co
American
Co
Hispano
$20.75
MISC-0240
Brake shoe extension spring used on
1910 American Underslung Traveler.
$6.50
HIS-0132
Hispano Suiza J-12 brake shoe spring
washer. Hispano Suiza part number
29760.
Material: Steel; Finish: Natural; LOA:
5.125; OD: .640; Wire: .091
Material: 4140; Finish Natural; ID:
6.4mm; OD: 10mm; Thickness: 2mm
Underslung Traveler Brake Shoe
Extension Spring
Co
Hispano
Co
American
Underslung Traveler Brake Shoe
Torsion Spring
$20.75
MISC-0241
Brake shoe torsion spring as used on
1910 American Underslung Traveler.
Material: Steel; Finish: Natural; Wire:
.105; OD coil: 1.4375; OAL: 3.125;
OAW: 2.8125; ID hook at end: .517
Suiza Brake Clevis Washer
$3.50
HIS-0136
Steel brake clevis washer for use on
Hispano Suiza J-12.
Material: 4140; Finish: Natural; OD:
14mm; ID: 8mm; Thickness: 2.5mm
Suiza Brake Cable Clevis Pin
$19.75
HIS-0119
Brake cable clevis pin for Hispano
Suiza J-12. Heat treated to grade 8
for maximum durability.
Material: 4140, heat treat grade 8;
Finish: Natural; Length: 25mm; OD:
14mm; Length under head: 22mm;
Head height: 3mm; Shaft OD: 8mm;
Hole: 3mm
Co
7/16-20
Co
Hispano
Suiza Brake Shoe Spring Washer
Banjo Brake Line Fitting
$43.50
BUG-0002
Bronze banjo fitting with 7/16-20 male
thread for 45° flare nut. Hole Dia. .600
(15.25 mm), thickness .480 (12.25
mm). Male thread is canted up slightly.
Many applications including use on
Type 57 Bugatti rear wheel cylinders.
Co
12mm
Male Nut for 1/4 or 6mm Tube
$13.00
BRK-0016
Brake line male nut for 1/4" or 6mm
tube. Made from steel, has 12mm hex,
6.75mm ID with 12mm x 1.0 thread.
Black oxide finish.
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
2
Brakes & Brake Master Cylinder
Prices subject to change
Co
Brake
Line Female Flare Nut for 1/4 or 6mm Tube
$13.00
BRK-0005
New brass brake line flare nut for
European cars of the 1930's and
1940's using Lockheed hydraulic
brakes. Duplicate of original design
including nicks around the hex. Fits
Delage D-8, Bugatti T57 and many
others. For use with 1/4" or 6mm
tubing. For use with brake line
adapter, our part #BRK-0007.
Co
11/16-16
Co
Hex
Measures: .562 (9/16") hex, .930
(15/16") OAL, 7/16-20 thread in I.D.,
.260 I.D.
Co
Brake
Line Male Flare Nut for 1/4 or 6mm Tube
$13.00
BRK-0006
New brake line nut for European cars
of the 1930's and 1940's. Duplicate of
original design including nicks around
the hex. For use with 1/4" or 6mm
tube. Fits Delage D-8, Bugatti T57 and
many others.
Made of SAE 4140 steel with black
oxide finish. Measures: .500 hex, .250
high, .900 OAL, 1/2-20 thread, .260 I.D.
Co
Male
Flare Nut for 1/4 or 6mm Tube
$13.00
BRK-0004
Brake line male flare nut for 1/4" or
6mm tube. This flare nut has many
applications including use on Pegaso
and post war Talbot Lagos fitted with
hydraulic brakes.
Hose Adapter 11/16-16 to 7/16-20
$36.25
BRK-0023
Brake hose adapter 11/16-16 ID to
7/16-20 OD.
Nut for 11/16-16 Hose to 1/4 Inverted Flare
$7.75
BRK-0003
Hex nut for use with 11/16-16 hose to
1/4 inverted flare line adapter. Used in
conjunction with a line adapter
available separately: our part #BRK0002.
26mm hex steel nut, 18mm 1.5
thread, 8.4mm thick. Black oxide
finish.
Co
Flare
Tube Elbow for 1/4 Tube to 1/8 Pipe
$12.50
0221
Flare tube elbow to connect a 1/4 tube
to a 1/8 pipe. Manufactured from
bronze with 1/8-27 NPT and 7/16-20
threads. Has many applications
including use on Duesenberg Model J.
Measures: pipe thread end has .387
ID, other end has .342 ID, pipe thread
is approx. .365 long, normal thread
approx. .34, OAL is 1.102 x .980 x
.470.
Co
Adapter
Made from steel, has 14mm hex,
6.5mm ID and 1/2-20 thread. Black
oxide finish.
Co
Brake
Brake Hose Hex Nut
$2.75
BRK-0017
Generic mounting nut for 11/16-16
brake hose. This nut has a 1" hex,
5/16 thickness. Cadmium plated,
manufactured from steel.
for 11/16-16 Hose to 1/4 Flare Nut
$38.25
BRK-0007
Cadmium plated steel Lockheed brake
hose union. Male thread 7/16-20 for
1/4 flare nut. Female thread11/16-16
for Lockheed brake hose. Mounts on
bracket attached to frame that holds
the brake hose.
Material: Steel; Finish: Cadmium
plated; OAL: 1.500; Hex: 7/8
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
3
Brakes & Brake Master Cylinder
Prices subject to change
Co
Adapter
for 1/16-16 Hose to 1/4 Inverted Flare
$38.25
BRK-0002
Brake line adapter for 11/16-16 hose
to 1/4 inverted flare. Mounts on the
bulkhead or frame to anchor the hose.
Used in conjunction with a hex nut
available separately: our part #BRK0003.
Co
Union
for 11/16-16 Brake Hose & 1/4 Pipe
$103.00
BRK-0012
Brake union for 11/16-16 brake hoses
and 1/4" brake pipes. Manufactured
from bronze, has 11/16-16 thread for
brake hose and 1/2-20 thread with
inverted flare seat for the brake pipe.
Commonly used on the rear axle or
chassis.
Measures 35.5mm OAL with 22mm
hex. Outer thread size is M18 x 1.5,
inner thread is 11/16-16 one end and
1/2-20 on the other. Black oxide finish.
For use on all Type 57 Bugattis with
hydraulic brakes, Ferrari 250
Pininfarina Coupe and others.
Co
Adapter
Co
Lockheed
for 11/16-16 Hose to 3/8 Flare Nut
Master Cylinder Barrel, 1 1/2 Bore
$49.00
J-4857
Cadmium plated steel brake hose
union with 11/16-16 ID thread for the
brake hose and 5/8-18 OD thread for
3/8 flare nut. Mounts on the bracket
attached to the frame to hold the brake
hose. OAL is 2 1/8.
$128.75
J-4801-22
Stainless steel 1 1/2" bore master
cylinder barrel for Lockheed box type
master cylinders using a threaded
barrel.
Co
Adapter
Co
Lockheed
for 11/16-16 Hose to 5/16 Flare Nut
Master Cylinder 3/8-24 Lever Bolt
$38.25
BRK-0008
Cadmium plated steel Lockheed brake
hose union. Male thread 1/2-20 for
5/16 flare nut. Female thread11/16-16
for Lockheed brake hose. Mounts on
bracket attached to frame that holds
the brake hose.
$11.50
J-4801-19-A
Wagner Lockheed box type master
cylinder lever bolt.
Co
Adapter
Co
Lockheed
for 11/16-16 Hose to Wheel Cylinder
$41.25
BRK-0013
Cadmium plated steel brake hose
adapter, 11/16-16 ID thread with 1/220 OD thread. Used to connect
Lockheed brake hoses to wheel
cylinders. Measures 1 1/2" OAL with
7/8 hex, threaded end approx. 5/8 long.
Material: Cadmium plated heat treated
steel; Thread: 3/8-24; Thread length:
1.187; OD: .370; OAL: 1.937; Head:
9/16 Hex
Master Cylinder Brake Shaft
$180.25
J-4801-16-A
Lockheed box type master cylinder
cross shaft with splines for internal
and external levers. These shafts are
oversize and must be ground to fit the
housing bore. The standard bore is
.875 on the small end and 1.000 on
the large end. The shaft can be ground
up to .005 oversize to fit worn
housings. Allow 1 week for grinding
once order is placed.
Material: Steel; Finish: Cadmium
plated; OD: 1.000; Length: 5.890
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
4
Brakes & Brake Master Cylinder
Prices subject to change
Co
Lockheed
Master Cylinder Screw Type Cap Adapter Co
Lockheed Master Cylinder Cup, 1 1/2 Bore
$72.25
J-4801-32
Lockheed brake master cylinder screw
type cap adapter. For use on
Duesenberg Model J and others.
$13.50
J-4801-15-A
For 1 1/2" bore master cylinders.
Suitable for Wagner Lockheed box
type master cylinders & others.
Co
Lockheed
Co
Lockheed
Master Cylinder Check Valve & Seal, 1
1/2 Bore
Master Cylinder Piston Cup (1 1/4 Bore)
$12.25
J-4801-15-B
Piston cup for 1 1/4 bore master
cylinders. Suitable for Wagner
Lockheed box type master cylinders
and others. Wagner Lockheed part
number FC-4881.
$25.75
J-4801-11-A
For 1 1/2" bore master cylinders.
Suitable for use with Wagner
Lockheed box type master cylinders
and others.
Material: Rubber & brass; Height: 3/8;
OD: 1 9/32 base, 1.208 top; ID: 1.9/64
base, 1.056 top
Co
Lockheed
Master Cylinder Check Valve, 1 1/4 Bore
$15.50
J-4801-11-B
Master cylinder check valve assembly
for 1 1/4 bore Wagner Lockheed box
type brake master cylinders. Wagner
part number F-14425.
Spacer
ID: 11/16; OD: 1 5/16; Thickness: .192
Valve
Hex: 1 1/8; Height: 7/16; ID: 27/32
Co
Lockheed
$6.25
J-4801-20
Cover gasket for Wagner Lockheed
box type brake master cylinders. Die
cut paper gasket, fits between cover &
box.
Master Cylinder Filler Cap
$13.00
J-4801-30-A
Lockheed box type master cylinder
screw on reservoir cap. Cap is vented
and will fit many master cylinders
including those used on Reo, Stutz,
Duesenberg and others. Fits both 1
1/2 and 1 1/4 bore master cylinders.
Cap OD: 1 7/8; Thread: 1 3/4
Co
Lockheed
Master Cylinder Cover Gasket
ID: 4.75 long x 2.6 wide; OD: 5.25 x
3.10; 5/16 Stud holes, 2.5 center to
center across width, 2.312 center to
center across length
Co
Lockheed
Master Cylinder Head Gasket
$6.25
J-4801-7
For Wagner Lockheed box type
master cylinders. Die cut paper
gasket, fits between barrel & box.
ID: 2.00; 2.475 Width across side;
3.79 Corner to corner; 3/8 Stud holes,
2.975 center to center
Co
Lockheed
Master Cylinder Outlet Fitting
$39.25
J-4801-3
Cadmium plated steel outlet fitting for
use with Lockheed box type master
cylinders.
1/2-20 straight thread, 5/8-18 thread
on 45° flare end for 3/8 tubing.
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
5
Brakes & Brake Master Cylinder
Prices subject to change
Co
Lockheed
Master Cylinder Outlet Fitting Gasket
$3.75
J-4801-2
Copper washer to seal brake fitting to
the master cylinder or wheel cylinder.
Co
Lockheed
Master Cylinder Piston Stop
$25.75
J-4801-12
Spring steel clip to retain mater
cylinder piston in barrel. For use with 1
1/2" bore master cylinders.
ID is .508, OD is .800, thickness is
.032.
Co
Lockheed
Master Cylinder Outlet Hex Plug
$2.25
J-4801-4
Lockheed box type master cylinder
outlet hex plug.
Material: Steel; Finish: Cadmium
plated; Thread: 1/2-20; Thread length:
.552; Head: 3/4 hex, .205 tall; OAL:
.750
Co
Lockheed
Master Cylinder Piston & Plug, 1 1/2
Bore
$50.00
J-4801-10-A
Aluminum master cylinder piston with
hardened steel insert. Fits 1 1/2 bore
Lockheed box-type master cylinders
as used by Duesenberg, Stutz and
others. Measures 1 1/2 OD and 1 1/16
high.
Co
Lockheed
Master Cylinder Piston (1 1/4 Bore)
$50.00
J-4801-10-B
Brake master cylinder piston with
hardened steel insert. For use on any
automobile using 1 1/4 Lockheed box
type master cylinders including REO,
Stutz and many others.
Material: Aluminum; Finish: Natural;
OD: 1 1/4; Height: 1.072; Center
cylinder: 5/8; ID: 1 1/16
Version: 2/5/2015
Co
Lockheed
Master Cylinder Shaft Seal
$16.50
J-4801-14
For Wagner Lockheed box type
master cylinders, Lockheed part #FD273. Molded urethane, fits 1" O.D.
shafts with .935 Dia. for seal.
Measures 1.375 O.D. x .920 I.D. x
.237.
Co
Lockheed
Master Cylinder Repair Kit, 1 1/2 Bore
$128.75
J-4801-33-K
Repair kit for 1 1/2 bore Wagner
Lockheed box type brake master
cylinders and others. This repair kit
contains one each of the following:
Master cylinder head gasket
Master cylinder cover gasket
Piston & plug assembly
Check valve & seal assembly
Shaft oil seal cup
Piston cup
Outlet fitting gasket (Qty. 3)
Co
Lockheed
Master Cylinder Repair Kit, 1 1/4 Bore
$118.50
J-4801-34-K
Repair kit for 1 1/4 bore Wagner
Lockheed box type brake master
cylinders and others. This repair kit
contains one each of the following:
Master cylinder head gasket
Master cylinder cover gasket
Piston & plug assembly
Check valve & seal assembly
Shaft oil seal cup
Piston cup
Outlet fitting gasket (Qty. 3)
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
6
Brakes & Brake Master Cylinder
Prices subject to change
Co
Lockheed
Master Cylinder Stop Light Switch
Co
Lockheed
Master Cylinder Oil Seal Cup, 1 1/16
Adapter
Bore
$14.00
J-6485
Used to adapt 1/2-20 outlet port to 1/8
pipe when installing brake light switch
on Lockheed box type master
cylinders.
$6.25
BRK-0043
Wagner Lockheed master cylinder oil
seal cup for 1 1/16 bore box type
master cylinders.
Material: Steel; Finish: Cadmium
plated; Thread: 1/2-20; Thread length:
.500; Head: 3/4 Hex drilled & tapped
with 1/8 pipe thread, .385 tall
Co
Lockheed
Master Cylinder Outlet Fitting
$10.00
BRK-0031
Cadmium plated steel outlet fitting for
Lockheed box type master cylinders.
1/2-20 Threads on both ends.
Material: Steel; Finish: Cadmium;
Thread: 1/2-20, 1/2-20; OAL: 1.437;
Hex: .625; ID: .250; Flare end length:
.625; Straight end length: .500
Co
Lockheed
Master Cylinder Check Valve, 1 3/4 Bore
$12.50
BRK-0045
Wagner Lockheed brake master
cylinder check valve & seal for 1 3/4
bore box type master cylinders.
Master Cylinder Oil Seal Cup, 1 1/4 Bore
$6.25
BRK-0044
Wagner Lockheed brake master
cylinder oil seal cup for 1 1/4 bore box
type master cylinders.
Material: Rubber; OD: 1.290; ID:
1.200; Height: .420
Co
Lockheed
Master Cylinder
$7.75
BRK-0042
Wagner Lockheed brake master
cylinder oil seal cup for 1 3/4 bore box
type master cylinders.
Material: Rubber; OD: 1.812 to 1.687;
ID: 1.562; Height: .437
Co
Lockheed
Master Cylinder Check Valve, 1 1/16
Bore
$12.50
BRK-0046
Wagner Lockheed brake master
cylinder check valve & seal for 1 1/16
bore box type master cylinders.
Seal: .6875 x .195; Valve OD: 1.375;
Valve height: .380
Co
Lockheed
Material: Rubber; OD: 1.096; ID: .967;
Height: .355
Seal: 1.00 x .500 x .192; Valve OD:
.930; Valve height: .448
Co
Lockheed
Master Cylinder Cover Gasket, Large
$13.00
BRK-0040
Cover gasket for Wagner Lockheed
box type master cylinders. Laser cut
gasket fits between the cover and
box. Larger than our standard gasket,
part number J-4801-20. This gasket is
commonly used on trucks and larger
vehicles.
Material: Gasket paper; Length: 6.540;
Width: 3.156; Thickness: .028; Holes:
.335; Port: 5.872 x 2.555; Hole
centers: 2.945, 2.500
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
7
Brakes & Brake Master Cylinder
Prices subject to change
Co
Lockheed
Master Cylinder Barrel Sealing Washer
Co
Willys
Jeep Brake Master Cylinder Fill Hose
$6.25
J-4801-22-1
Aluminum sealing washer used in 1
1/2 bore Wagner Lockheed threaded
master cylinder barrels. Seals barrel to
head casting.
$25.75
BRK-0034
Fill hose for the brake master cylinder
on Willys Jeep models FC 150 and FC
170. Used on Forward Control Jeeps
built from 1956 - 1965.
Material: Aluminum; OD: 1.630; ID:
.772; Thickness: .038
Material: Brass, rubber; Thread: 1/4
NPT, 1/8 NPTF; OAL: 7.500
Co
Lockheed
Co
Braided
Master Cylinder Outlet Fitting
$10.00
BRK-0032
Cadmium plated steel outlet fitting for
Lockheed box type master cylinders.
Material: Steel; Finish: Cadmium;
Thread: 7/16-20, 1/2-20; OAL: 1.312;
Hex: .625; ID: .187; 7/16-20 Flare end
length: .562; 1/2-20 Straight end
length: .500
Co
Lockheed
Master Cylinder Head Gasket, Large
$13.00
BRK-0039
Head gasket for Wagner Lockheed
box type master cylinder. Laser cut
paper gasket fits between barrel and
box. Larger than our standard gasket,
part number J-4801-7. This gasket is
commonly used on trucks and larger
vehicles.
Material: Gasket paper; Length: 3.700;
Width: 3.140; Thickness: .028; Port:
2.540; Holes: .483; Hole centers:
2.531, 1.975
Co
Stop
Light Switch Assembly
$35.25
J-6484
Stop light switch for all vehicles using
a screw terminal type brake light
switch.
1/8 Pipe thread; 6 OR 12 Volt
Bronze Hose for Fuel & Vacuum Lines
$24.75
MISC-0017
Bronze convoluted hose with braided
cover suitable for flexible fuel lines and
is a replacement for Packard V-12
vacuum hose.
ID: 1/4; OD: 9/16; Sold by the foot.
Co
Packard
V-12 Vacuum Check Valve Rivet
$17.00
P-0028
Brake vacuum check valve rivet to fit
Packard V-12. This rivet holds the
brake vacuum check valve mounted
on the intake manifold to the housing.
Made from brass, measures .427 long,
.234 head diameter, .125 large shank
diameter and .095 small shank
diameter.
Co
11/16-16
Hydraulic Brake Hose
$38.25
MISC-0030
Wagner Lockeed hydraulic brake
hoses fitted with 11/16-16 fittings and
captive copper sealing washers.
Pressure tested and ready to install.
Available in any length - specify
OVERALL length in inches when
ordering. Overall length is determined
by measuring the total length of the
hose from end to end.
Co
Hydraulic
Brake Hoses
$38.25
MISC-0031
We can produce hydraulic brake
hoses in any specified length with any
fitting for nearly every car ever made.
Our hoses are pressure tested and
ready to install on delivery.
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
8
Brakes & Brake Master Cylinder
Prices subject to change
Co
Ferrari
Hydraulic Brake & Clutch Hoses
Co
Bragg
Kliesrath Brake Booster Shaft Seal, Trucks
38.25 and up
Varies
Hydraulic brake and clutch hoses for
vintage and classic Ferrari. Hoses
can be produced in any specified
length for any model of car.
$25.75
BRK-0052
Leather brake booster shaft seal for 9
1/2" Bragg Kliesrath brake boosters
with a 1 1/4" shaft. Commonly used on
larger vehicles such as trucks.
All hoses come with cadmium plated
fittings, have been pressure tested
prior to shipping and are ready for
installation on delivery. Normal
production time is 24 hours or less same day service in most instances.
Some hoses may require additional
processing time if a sample is
required. Most brake or clutch hoses
are priced $37.50 each, some fittings
may require an additional assembly
charge.
Material: Leather; Base OD: 1.712;
Body OD: 1.437; ID: 1.250; Height:
.500; Thickness: .093
Co
Bragg
Kliesrath Brake Booster Cover Shaft Seal
$10.50
BRK-0047
Leather cover shaft seal for Bragg
Kliesrath brake boosters. Fits a 3/4
shaft and mounts inside the front
cover. Note: This will not work with a
Duesenberg style cover.
$56.75
J-4901-7
Bragg Kliesrath brake booster air
cleaner cover. Used for containing the
air cleaner filter material in cars using
6" diameter brake boosters. Top hole
style.
Co
Bragg
Kliesrath Brake Check Valve Mounting
Bracket
Kliesrath Brake Booster Cylinder Tag
$13.00
J-4901-25
Adhesive ID tag for use on Bragg
Kliesrath brake booster cylinders.
Gold background, measures 1 1/4 x 2
11/16.
Co
Fabric
Kliesrath Brake Booster Air Cleaner Cover,
Top Hole Style
Material: Steel; Finish: Cadmium
plated; OD: 2 7/8; ID: 1.265; Height:
.735; Top holes ID: 1/4; Center top
holes: 2 1/8; Thickness: .030
Material: Leather; Finish: Natural;
Large OD: 1.266; Small OD: .925; ID:
.750; Height: .450; Thickness: .100
Co
Bragg
Co
Bragg
Braid Reinforced Rubber Vacuum Hose
$12.50
J-4950
Special fabric braid reinforced rubber
hose. This is as close to the original
heavy wall hose as we could find.
Sold and priced per foot.
$77.25
BRK-0035
Urethane rubber check valve mounting
bracket for Bragg Kliesrath brake
booster systems. Mounts vertically in
the engine compartment to support the
check valve that protects the booster
system if the engine backfires.
Commonly used on larger commercial
vehicles, such as trucks and fire
trucks, but may also be used on
passenger vehicles.
Material: Urethane rubber; Base
length: 3.570; Base width: 2.375;
Height: 2.00; ID: 1.125; Stud holes:
.250
Co
Bragg
Kliesrath Brake Canister Cover
$360.50
J-4901-2
Cadmium plated bronze casting, fully
machined to fit 6" Dia. boosters.
Superb detail & durability.
Measures 1/2" ID and 7/8" OD.
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
9
Brakes & Brake Master Cylinder
Prices subject to change
Co
Bragg
Kliesrath Brake Booster Air Cleaner Cover,
Side Hole Style
$56.75
J-4901-7-B
Bragg Kliesrath brake booster air
cleaner cover. Used for containing the
air cleaner filter material in cars using
6" diameter brake boosters. An
alternate version to our top hole style
air cleaner cover, part #J-4901-7, with
holes along the side instead of the top.
Material: Steel; Finish: Cadmium
plated; OD: 2 7/8; ID: 1.265; Height:
.735; Side holes ID: .283; Thickness:
.030
Co
Bragg
Kliesrath Brake Canister Shaft
$92.25
J-4901-16
3/4" O.D. cadmium plated steel shaft 6
1/4" long with 3/4-16 threads and
circlip groove on one end. Opposite
end drilled and tapped 3/8-24. Has the
groove to retain the bellows and flats
to hold while tightening the booster
cable lock nut.
Co
Brake
Booster Piston Rod Washer
$15.50
J-4901-12
8ga steel washer that fits on the brake
canister shaft, our part number J-490112. Under cut to fit retaining ring.
Thickness: 8ga.; ID: 3/4; ID at step:
.845; OD: 1 1/4; Step depth: .060
Co
Bragg
Co
Bragg
Kliesrath Brake Booster Shaft Seal
$15.50
BRK-0033
Valve seal for Bragg Kliesrath vacuum
suspended brake booster.
Material: Teflon; Finish: Natural; OAH:
.345; OD Base: 1.285; OD Top: .955;
ID: .496; Length of straight: .180;
Angle of chamfer: 45'
Co
Bragg
Kliesrath Brake Booster Seal, 9 1/2 OD
$62.00
BRK-0037
Formed leather seal for Bragg
Kliesrath brake booster. Larger than
our part BRK-0036, this size seal is
commonly used on large trucks. Must
be well oiled after installation.
Material: Leather; OD: 9.500; ID: 6.280
Co
Bragg
Kliesrath Brake Booster Seal, 7 3/4 OD
$46.75
BRK-0036
Formed leather seal for Bragg
Kliesrath brake boosters as used on
many makes and models of trucks and
cars. Must be well oiled after
installation.
Material: Leather; OD: 7.750; ID:
5.750; Height: .625
Co
Bragg
Kliesrath Brake Booster Cover Plate
Gasket, 3 1/2"
Kliesrath Brake Booster Bellows, Large
Truck
$10.50
BRK-0050
Die cut gasket for 3 1/2" cover plates
on Bragg Kliesrath brake boosters.
$31.00
BRK-0038
Universal brake booster bellows that
can be adapted to fit any larger truckstyle brake booster made by Bragg
Kliesrath. May require some trimming
for installation.
Material: Rubber; OAL: 7.125; Bellows
OD: 2.625; Small end OD: .625; Large
end OD: 1.234
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
10
Brakes & Brake Master Cylinder
Prices subject to change
Co
Bragg
Kliesrath Brake Booster Leather Cup Seal
(Lincoln V-12)
$36.25
MISC-0142
Leather cup seal for Bragg Kliesrath
brake booster cylinders used on late
1937-39 Lincoln V-12, may also fit
other years. Made of specially formed
and treated leather which works much
better than the rubber cup frequently
substituted for the original leather seal.
Must be well oiled after installation.
Material: Leather; OD: 4 1/2; ID: 2 3/4;
Height: 1/2; Thickness: 3/32
Co
Bragg
Kliesrath Brake Booster Cover Plate
Gasket, 5"
$10.50
BRK-0048
Die cut gasket for 5" cover plates on
Bragg Kliesrath brake boosters. Also
available in other sizes.
Material: Gasket paper; ID: 5.240; OD:
5.465; Thickness: .032
Co
Bragg
Kliesrath Brake Booster Cover Plate
Gasket, 4 1/2"
$10.50
BRK-0051
Die cut gasket for 4 1/2" cover plates
on Bragg Kliesrath brake boosters.
Co
Bragg
Kliesrath Brake Canister Leather Cup Seal
$54.25
J-4901-20
Seal is 6" O.D. x 4" I.D. x 5/8" high.
Made of specially formed and treated
.090 leather which works much better
than the rubber cup frequently
substituted for the original leather seal.
Must be well oiled after installation.
Co
Bragg
Kliesrath Brake Booster Piston Rod Nut
$24.75
J-4901-14
Bragg Kliesrath brake booster piston
rod nut.
Material: 303 SS; Finish: Natural;
Thread: 3/4-16; Head: 13/32 Hex x
9/32 high
Co
Bragg
Kliesrath Brake Booster Piston Rod Washer
$15.50
J-4901-12
8ga steel washer that fits on the brake
canister shaft, our part number J-490112. Under cut to fit retaining ring.
Thickness: 8ga.; ID: 3/4; ID at step:
.845; OD: 1 1/4; Step depth: .060
Co
Bragg
Kliesrath Brake Booster Air Cleaner Spring
$5.25
J-4901-9
Bragg Kliesrath brake booster cylinder
air cleaner spring.
Co
Bragg
Kliesrath Brake Booster Cover Plate
Gasket, 6"
Material: Spring Steel; Finish: Natural;
OD: 1.170; ID: 1.050; Wire DIA: 060
$10.50
BRK-0049
Die cut gasket for 6" cover plates on
Bragg Kliesarth brake boosters. Also
available in other sizes.
Co
Bragg
Material: Gasket paper; OD: 6.240; ID:
5.990; Thickness: .032
Kliesrath Brake Booster Bellows Retaining
Washer
$13.50
J-4901-3
Bragg Kliesrath brake booster cylinder
bellows retaining washer.
Material: Steel; Finish: Cadmium; OD:
1.666, 1.312; ID: 1.237; Height: .160;
Thickness: .040
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
11
Brakes & Brake Master Cylinder
Prices subject to change
Co
Bragg
Kliesrath Brake System 90' Vacuum Hose
Co
Bragg
Kliesrath Brake Diaphragm Opening Shaft &
Elbow
Disk
$38.25
J-4921
Cast bronze vacuum hose elbow for
1/2" I.D. hose with 3/8" pipe thread.
Measures 2" x 1 1/4".
$128.75
J-4904-5
Cadmium plated steel drilled and
tapped 1/2-20 on one end. Other end
has integral disk to open the
diaphragm.
Co
Bragg
Co
Bragg
Kliesrath Brake Valve Lower Housing
$231.75
J-4904-2
Fully machined aluminum casting for
the lower half of Bragg Kleisrath brake
valves. Used on many automobiles of
the 1920's and 1930's including
Duesenberg, Packard, Lincoln, Stutz
and more.
Co
Bragg
Co
Bragg
Kliesrath Brake Valve Three Finger Spring
$108.25
J-4904-3
Phosphor bronze three finger spring to
return the valve to the "off" position.
Kliesrath Brake Valve Upper Housing
$231.75
J-4904-8
Fully machined aluminum casting for
the upper half of Bragg Kleisrath brake
valves. Used on many automobiles of
the 1920's and 1930's including
Duesenberg, Packard, Lincoln, Stutz
and more.
Co
Bragg
$38.25
J-4904-6
Steel washer to support the
diaphragm. Fits into the lower
aluminum casting.
Kliesrath Brake Valve Bellows
$19.50
J-4904-7
Formed rubber bellows to fit over the
valve shaft & body to exclude dust and
water from the vacuum valve.
Co
Bragg
Kliesrath Brake Valve Diaphragm Support
Washer
Co
Bragg
Kliesrath Brake Valve Diaphragm Spring
$108.25
J-4904-4
Phosphor bronze spring to hold the
diaphragm against the housing.
Kliesrath Brake Valve Diaphragm
$14.00
J-4904-1
Precision die cut fabric reinforced
neoprene rubber to replace original
paper diaphragm - this new diaphragm
will last forever. Measures: O.D. 3
3/4", I.D. 3/4".
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
12
Brakes & Brake Master Cylinder
Prices subject to change
Co
Bragg
Kliesrath Brake Booster Check Valve Seal,
Large DIA.
Co
Bragg
$8.75
MISC-0247
Teflon brake booster check valve seal
for large diameter brake boosters such
as those used on trucks and
commercial vehicles.
$77.25
J-4910-7
Brass shaft with splined end to fit the
control knob or adapter plate. Has an
eared plate on one end to fit raising
ramp inside control housing.
Material: Teflon; Finish: Natural; OAL:
.408; Length under head: .280; Head
OD: .5625; Shaft OD: .200
Measures: 1 3/4" O.A.L, 5/16" O.D.
shaft.
Co
Bragg
Co
Bragg
Kliesrath Brake Booster Valve Shaft Seal,
Trucks
$25.75
BRK-0053
Leather booster valve shaft seal used
with long style - not pancake style valves in Bragg Kliesrath brake
boosters. For use on larger vehicles
such as trucks.
Material: Leather; Base OD: 1.000;
Body OD: .625; ID: .500; Height: .400;
Thickness: .093
Co
Bragg
Kliesrath Brake Valve Yoke
$49.00
J-4905
Steel yoke to fit on the brake valve.
Cadmium plated, drilled for 5/16"
clevis pin, has 1/2-20 thread 1 1/8"
long. Yoke is 3/4" x 3/4" x 1" long.
Kliesrath Brake Booster Vacuum Control
Splined Shaft
Material: Brass; Finish: Natural; OAL:
2.035; Disc width: .850, .605 OD;
Shaft length: 1.956; Shaft large OD:
.312; Shaft small OD: .226
Co
Bragg
9/16" O.D. x 1/8" thick with two 3/16"
notches.
Kliesrath Brake Control Unit Housing
$135.50
J-4910-1
Cadmium plated lost wax bronze
casting control unit has 1/8" pipe
vacuum port for the wiper motor, two
3/8" pipe ports for vacuum
connections, 5/8" shank is threaded
for mounting to the instrument panel or
mounting bracket.
Version: 2/5/2015
Kliesrath Brake Regulator Coupling Collar
$20.75
J-4910-9
Brass plate with splined I.D. to fit on
end of regulator shaft to allow control
cable to rotate the regulator shaft.
Co
Bragg
Co
Bragg
Kliesrath Brake Vacuum Control, Stutz
$77.25
MISC-0193
Brake booster vacuum control used on
Stutz. Eared plate on one end fits the
raising ramp inside the control
housing.
Kliesrath Brake Regulator Diaphragm
$11.00
J-4910-3
Fabric reinforced neoprene regulator
diaphragm precision diecut to replace
original paper diaphragm. This long
life part has not been known to fail.
Measures: 3 1/16" O.D., 3 /16" I.D.
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
13
Brakes & Brake Master Cylinder
Prices subject to change
Co
Bragg
Kliesrath Brake Regulator External Spring
Co
Bragg
Kliesrath Regulator Control Shaft Nut
$4.75
J-4910-5
Steel compression spring which fits
over the diaphragm support shaft
where it passes through the vacuum
control valve steel cover.
$5.25
J-4916
Special cadmium plated steel nut. Fits
part #J-4915 bushing to hold the
bushing in the instrument panel.
Co
Bragg
Co
Bragg
Kliesrath Brake Regulator Internal Spring
Kliesrath Brake Regulator 45' Flare Elbow
$4.75
J-4910-8
Steel compression spring which fits
over the diaphragm support shaft
where it pilots into the vacuum control
valve rotating shaft. This spring
transfers the lifting motion of the
rotating shaft to open the control valve
diaphragm.
$8.25
MISC-0002
Cast bronze elbow with 3/8" pipe
thread and 45° flare with 1/2" tube for
a 3/8" pipe.
Co
Bragg
Co
Bragg
Kliesrath Brake Regulator Elbow Adaptor
$49.00
J-4917-A
Cadmium plated steel adaptor has
3/8" pipe thread inside & 7/8" thread
outside on one end. The other end is
thread to screw onto 3/8" 45° flare
elbow. Measures 2 1/16" long.
Co
Bragg
Kliesrath Brake Booster Vacuum Control
Shaft Nut
$17.75
J-4910-4
Bragg Kliesrath brake vacuum control
vale shaft nut.
Material: Brass; Finish: Natural;
Thread: 8-32; Head: 5/16 OD x .080;
OAL: .205; Body: 1/4 OD x 1/8; Slot:
.060 x 1/8
Kliesrath Brake Regulator Knob For Dash
$49.50
J-4913
Cast bronze withI.D. splines to fit the
control valve shaft. This high quality
knob is produced from a lost wax
casting and has excellent detail.
Co
Bragg
Kliesrath Brake Booster Vacuum Control
Valve Shaft Disk
$27.50
J-4910-6
Bragg Kliesrath brake vacuum control
valve shaft disk.
Material: Steel; Finish: Cadmium; OD;
1.887; ID: .275; Height: .075;
Thickness: .040
Co
Bragg
Kliesrath Brake Regulator Weather Dial Tag
$87.75
J-4914
Beautiful reproduction chrome & black
enamel plate ready for installation.
5/8" I.D., 2 1/2" long, 2 3/16" high.
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
14
Brakes & Brake Master Cylinder
Prices subject to change
Co
Bragg
Kliesrath Brake Booster Vacuum Control
Valve Shaft
$81.75
J-4910-2
Bragg Kliesrath brake booster vacuum
control valve shaft.
Material: Brass; Finish: Natural
Co
Bragg
Kliesrath Brake Booster Control Washer
$4.25
J-4912
Bragg Kliesrath brake vacuum control
washer.
Material: Brass; Finish: Natural; OD:
3/4; ID: 5/8; OAL: .080; Thickness: .062
Disc: Main: 1 1/8 x .060, Step 1: .530 x
.020, Step 2: .642 x .040
Co
Bragg
Kliesrath Brake Booster Instrument Board
Bushing
Threaded Post: OD: 3/16 x 3/4,
Thread: 10-32;
Non Threaded Post: OD: 3/16 x .787
Co
Bragg
Kliesrath Brake Booster Vacuum Control
Shaft Spring Washer
$1.25
J-4910-10
Bragg Kliesrath brake vacuum control
shaft spring washer.
Material: Steel; Finish: Natural; OD:
.383; ID: .200; Thickness: .034
$16.50
J-4915
Bragg Kliesrath brake vacuum control
instrument board bushing.
Material: Brass; Finish: Natural;
Thread: 5/8-18; ID: .319; OAL: 1.00;
Head: 11/16 Hex x .387 high
Co
Bragg
Kliesrath Brake Booster Vacuum Control
Support Nut
Co
Bragg
Kliesrath Brake Booster Vacuum Control
Cover Plate
$16.50
J-4918
Bragg Kliesrath brake vacuum control
support nut.
$81.75
J-4910-11
Bragg Kliesrath brake vacuum control
cover plate.
Material: Steel; Finish: Natural;
Thread: 7/18-18; Hex: 1 1/16;
Thickness: .200
Material: Steel; Finish: Natural; OD:
3.038; ID: .208; Height: .196;
Thickness: .062
Co
Bragg
Co
Bragg
Kliesrath Brake Booster Leather Seal, 1935
Packard V12
Kliesrath Brake Booster Control Coupling
Collar
$6.00
J-4911
Bragg Kliesrath brake vacuum control
coupling collar.
$54.25
P-0176
Leather seal for the Bragg Kliesrath
brake booster as used on Packard
V12 from 1935. May also fit other
years.
Material: Leather; OD: 5.375; ID:
3.531; Height: .500; Thickness: .100
Material: Brass;Finish: Natural; OD:
3/4; ID: 5/8; OAL: 1/4; Thickness: .062
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
15
Brakes & Brake Master Cylinder
Prices subject to change
Co
Bragg
Kliesrath Brake Cylinder Bellows, Packard
$72.25
P-0129
Rubber bellows for 1937-39 Packard V12 vacuum brake cylinders.
OAL: 5 1/2; ID: 1 1/2, 1 1/16; OD: 2 1/4
Co
Stutz
Hand Brake Drum Bolt Lock Washer
$7.75
STZ-0011
Laser cut steel lock washer for
transmission companion flange bolt.
Known to fit 1931 DV-32. May also fit
other years and models of Stutz.
Material: Steel; Finish: Black oxide;
OD: 2.250; ID: 1.593; Thickness: .035;
Tab: .250 x .090
Co
Bragg
Kliesrath Brake Booster Valve Diaphragm,
Packard
$13.50
P-0021
Fabric reinforced silicone rubber die
cut diaphragm for Type Q Bragg
Kliesrath brake booster valves.
Commonly used on Packard and other
cars of the late 1930's. Measures 4 1/4
OD, 3/4 ID.
Co
Maserati
Material: Steel; Finish: Cadmium;
OAL: 3.635; Width: .742; Thickness:
.045; Hole: .250; Hole centers: 2.242
Co
Hispano
Co
Packard
V-12 Brake Booster Leather Seal
$41.25
P-0131
Leather seal for the brake boosters
used on 1937 Packard V-12, may also
be compatible with other years. This
is the smaller of the two leather seals.
Material: Leather; Finish: Natural; ID:
2.500; OD: 3.688; Thickness: .097;
Height: .475
Co
Packard
V-12 Vacuum Brake Cylinder Rubber Boot
$14.50
P-0136
Rubber boot as used on actuating
valve rod, clutch and brake vacuum
cylinder on 1937 Packard V-12, may
also be compatible with other years.
Quantity of two used per car. Part of
Packard assembly number 237016-7.
Material: Rubber; OAW: .875; Bottom
OD: .500; OAH: .625
Ghibi Brake Lock Plate
$17.00
MAS-0008
Laser cut cadmium plated steel lock
plate for the rear brake caliper
mounting bolt on Maserati Ghibli.
Suiza Brake Rod Bolt
$36.25
HIS-0129
Hardened steel brake rod bolt for use
on Hispano Suiza J-12.
Material: Steel, max RC, case depth
.030 - .040; Thread: M8 x 1.25; Thread
length: 12mm; Head OD: 17mm; OAL:
53mm; Head height: 5mm; Head flat:
11mm; Shaft OD: 11mm; Length under
head: 48mm
Co
Cord
810 812 Brake Drum Pilot Rivet
$10.50
COR-0023
CNC Machined solid steel rivet used
on the brake drum pilot on Cord 810
and 812.
Material: 12L14 Steel; Finish: Natural;
OAL: 2.218; Major OD: .687; Shaft
OD: .341; OD at top: .312
Co
1937
Cadillac Rear Axle to Brake Drum Lock Plate
$15.50
CAD-0087
Laser cut steel lock plate for the rear
wheels on 1937 Cadillac.
Material: Steel; Finish: Natural;
Thickness: .060; Width: 1.795; Length:
2.797; ID: 1.163; "U": .370 x .343,
radius of 1.75
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
16
Brakes & Brake Master Cylinder
Prices subject to change
Co
Hispano
Suiza Brake Drum Bolt
$4.25
HIS-0113
Hispano Suiza J-12 brake drum bolt.
Hispano Suiza part number B4398.
Material: 4140, heat treat grade 8;
Finish: Natural; Thread: M8-1.25;
Thread length: 10mm; Length: 21mm;
Hex: 12mm; Length under head: 15mm
Co
Hispano
Suiza Front Brake Pivot Pin
$51.50
HIS-0130
Steel front brake pivot pin for Hispano
Suiza J-12. Hardened for maximum
wear resistance and left oversized so it
can be ground to fit application.
Co
Cord
L-29 Rear Brake Shoe Clip
$5.25
COR-0019
Laser cut steel clip for the rear brake
shoe of L-29 Cord. Quantity of four
used per car. Cord part number
E65045, "Brake shoe anchor pin C
washer".
Material: Steel; Finish: Natural; Width:
1.308; Length: 1.437; Thickness:
.088; ID: .900
Co
Bentley
Brake Rod Clevis Pin
$12.50
BENT-0004
Clevis pin for the brake rod on 6 1/2 &
8 Liter Bentley. This pin was produced
oversize from original specifications.
Material: Steel; Thread: M8 x 1.25;
OAL: 65mm; Head OD, length: 11mm
x 11mm; Soulder OD, length: 16mm x
3mm; Shaft OD, length: 10mm x 41mm
Material: 4140 Steel, heat treat grade
8; OAL: 1.150; Length under head:
1.062; Hole: .140; Head OD: .625;
Body OD: .406
Co
Bugatti
Co
Voisin
T57 Brake Shoe Retaining Clip
C-20 Vacuum Brake Booster Leather Seal
$10.00
BUG-0039
Bugatti Type 57 brake shoe retaining
clip - fits hydraulic systems only. Laser
cut, made from 1010 steel, .030 thick.
Two required per wheel.
$77.25
V-0016
Formed leather vacuum brake booster
seal used on Voisin C-20 automobiles.
Co
Cord
Co
Cadillac
L-29 Front Brake Shoe Clip
Material: Leather; OD: 175mm
(6.8750); ID: 167mm (6.563); Hole:
13mm (.500); Height: 45mm (1.750);
Thickness: 4mm (.156)
V16 Power Brake Booster Screw Set
$5.25
COR-0020
Laser cut steel clip for the front brake
shoes on L-29 Cord. Quantity of four
used per car. Cord part number
E6733, "Brake shoe anchor pin C
washer".
$15.50
CAD-0160
Stepped screw for the power brake
booster on 1930 - 1931 Cadillac V-16.
Finished in black oxide to prevent
corrosion.
Sold as a set of three.
Material: Steel; Finish: Natural;
Length: 1.103; Width: 1.111; ID: .700;
Thickness: .088
Material: 12L14; Finish: Black oxide;
Thread: 4-40; Thread length: .095;
OAL: .312; Head: .221 OD x .090 long;
Length under head: .226; Shaft OD:
.140
Version: 2/5/2015
Classic & Exotic Service, Inc., 2032 Heide, Troy, MI 48084 USA
17