Safedrive® 10/15 Drive system for non counter-balanced Industrial Doors • Three phase with 100Nm output torque and 15rpm output speed • High precision worm drive gear box • Horizontal or vertical mounting • Safety brake incorporated • Low level hand chain operation as standard • Plug-connected digital control equipment • Certified to BS EN 12453 Application Approvals & Certification The Safedrive® 10/15 is a specially developed drive unit for powering rolling shutter doors and grilles which are not counter-balanced by springs or other devices. A high precision worm gearbox is used to ensure smooth operation and a long life. The gearbox incorporates a separate safety brake meeting the anti-fallback requirements for vertically lifting doors, a digital limit mechanism for precise control of the stopping position and is provided with plug in pre-wired control systems. Using the Safedrive® 10/15 manufacturers can construct power operated shutter doors and grilles to meet the British and European Standards for Industrial and Commercial Doors. The Drive units are type tested to: BS EN 12453 BS EN 60335-1 BS EN 60335-2-103 TÜV NORD CERT GmbH Installation The Safedrive® 10/15 may be installed with the motor axis either horizontal or vertical*. The hand chain operator is suitable for use in any plane to optimise installation space. The floating foot provided is suitable for use as the roller end bearing itself but it is recommended that the drive is normally installed so the roller is fitted between the bearings and the drive restrained by a torque arm. Full details available on request. Reliability The drive is designed, for a typical door size, to have a life of more than 30,000 cycles. * Motor down Construction Product Built in Safety Brake Certificate of conformity according to: BS EN 12604 / 12605 TÜV SÜD Industrieservice GmbH Regulation CPR 305/2011 By using Safedrive® 10/15 it enables the door manufacturer to meet the required Construction Product Regulations (CPR) and C.E. mark their doors. Control Panels The Safedrive® 10/15 is compatible with the following range of three phase GfA digital control panels. All control panels incorporate up/ down/ stop buttons and plug. For more information on functionality please see corresponding datasheets. Commercial Ref. Description GE29590A TS 959 three phase GE29700S2A TS 970 three phase GE29710B TS 971 three phase GE29810B TS 981 three phase GA10/15RD 120mm 413mm 2 4 3 120mm 183mm 246mm 1 5 30mm ø12.5mm 80mm 95mm 160mm 200mm 230mm 442mm GA10/15RD 80mm ø10mm 1. Gearbox with built in safety brake Shaft Detail (nominal) ø22mm Hand Crank Option D (mm) H (mm) B (mm) 30 33.3 8 D B 2. Motor 3. Limit switches 4. Hand chain mechanism H 5. Floating foot 253mm Technical Specification Model GA10/15RD Output torque Nm 100 Output speed rpm 15 Hollow shaft dia. mm 30 Locking Torque Nm 510 Safety brake approval number TorFV 4/024 Motor power kW 0.3 Supply voltage V 3x400 Motor rated current A 1.5 Supply fuse (slow blow) A 10 Frequency Hz 50 Max cycles per hour H-1 20 Limit switch capacity Turns 20 Weight Kg 15.3 Max. hand override Handcrank/Handchain N 65/172 GfA ELEKTROMATEN UK Ltd Unit 1, Titan Business Centre, Spartan Close, Warwick, UK. CV34 6RR Tel: (+44) 01926 452 452 Fax: (+44) 01926 336 417 Email: [email protected] Company Reg. No. 1489927 V.A.T Reg. No. GB 307 3656 62 © 08.14 www.gfa-elektromaten.co.uk