1. home and garden
2. home furnishings
3. lamps and lighting

Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Category:
Explosion Proof Light Rentals
02/09/2015
Page: 1
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Portable Explosion Proof Transformer - 480V to 120/240V - 1500W Transformer - (4) Outlets
Part #: RNT-EPL-TX-1500-480-120.240-300
Price: $9,698.80
Made in the USA
*THIS UNIT IS FOR RENTALS*
The Larson Electronics RNT-EPL-TX-1500-480-120.240-300 explosion proof temporary power distribution system converts 480V to
120/240V AC electrical current. This portable transformer provides operators the ability to safely tap into commonly found 480V and
distribute 120V or 240V within explosion proof environments. This wheeled power distribution system allows operators to safely
operate up to 1500 watts of lighting and electrical equipment within Class 1 Division 1 zones.
The RNT-EPL-TX-1500-480-120.240-300 portable explosion proof power distribution system is designed to provide operators using 120/240V
equipment in hazardous locations with a means to operate off 480V outside the hazardous environment. This unit includes four explosion proof
twist lock receptacles rated at 20 amps each. This compact power distribution system is designed for portability and convenience as well as
durability and is mounted to a wheeled, non-sparking aluminum frame for added protection.
Operators provide 480V from outside the hazardous location to the 1500 watt transformer via the provided 300' SOOW line in cable to the
encapsulated transformer. The explosion proof transformer converts common 480V to 120V or 240V (choose below) for use with explosion proof
electrical equipment in Class rated environments. The output side is equipped with four 2023, Class 1 and 2, Divisions 1 and 2 receptacles
designed to accept twist lock plugs like our EPP-15A and EPP-20A explosion proof plugs. The class rated transformer and distribution assembly
is mounted onto a rugged cart style framed constructed of non-sparking aluminum and powder coated for added corrosion resistance. Mobility is
provided by rotating front casters and run flat rear tires, allowing operators to wheel this temporary transformer from betweein job sites within the
hazardous environment.
Larsonelectronics.com can build transformers to your specifications. If this model does not meet your needs, please contact us at 1-800-3696671 or [email protected].
02/09/2015
Page: 2
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-TX-1500-480-120.240-300 Explosion Proof Power
Distribution
Features/Ratings
Line In: 480V via 300' SOOW cable w/ blunt cut end
Class 1 & 2, Divisions 1 & 2
Line Out: (4) 2023 C1D1 120V or 240V Twist Lock Receptacles
2023 Twist Lock Receptacles
Dimensions: 30”-H x 14”-D x 24”- W
20 Amp Primary Rating
Mounting: Portable Dolly Cart with Wheels
Ratings: Class 1 Division 1 Explosion Proof
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EPL-TX-1500-480-120.240-300;
Monthly...$1616.47 USD
Weekly...$1212.35 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
*All grounding shall comply with state and local codes and meet the
minimum requirements of the National Electronic Code section 250*
Scroll Down to Purchase
02/09/2015
Page: 3
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1
- Hi-Res Image 2
- Hi-Res Image 3
02/09/2015
Page: 4
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 4
- Hi-Res Image 5
02/09/2015
Page: 5
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Portable Explosion Proof Power Supply - (4) 12 Volt DC Class I Division 1 Outlets *RENTAL*
Part #: RNT-EPL-RPS-70A
Price: $9,630.00
Made in the USA
This unit is for rentals
The Larson Electronics RNT-EPL-RPS-70A explosion proof power supply enables operators to power low voltage LED lights via four
Class 1 and 2, Division 1 and 2 receptacles. Once the encapsulated 70ah sealed lead acid battery is depleted, operators can plug this
unit into an explosion proof 120 volt outlet or standard 120 volt outlet to charge the unit overnight. When paired with Larson
Electronics’ EHL-LED explosion proof LED hand lamps, operators can run 4 hand lamps for 21 hours on a single full charge.
The RNT-EPL-RPS-70A explosion proof portable power supply from Larson Electronics is built to provide operators in
hazardous locations with a method of power low voltage hand lamps with 12 or 24 volts DC output. This unit includes four
explosion proof receptacles rated at 20 amps each. This compact power distribution system is designed for portability and
convenience as well as durability and is mounted to a wheeled, non-sparking aluminum frame for added protection.
The output side is equipped with four 2023, Class 1, Division. 1 receptacles designed to accept twist lock plugs like our
EPP-15A and EPP-20A explosion proof plugs. The explosion proof enclosure contains a 70ah AGM battery and
charger/maintainer systems. This explosion proof battery system comes standard with a 25 foot, 16/3 SOOW cord
terminated with a 120V, 15 amp explosion proof male plug.
Larsonelectronics.com can build transformers to your specifications. If this model does not meet your needs, please contact us at 1-800-3696671 or [email protected].
02/09/2015
Page: 6
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-RPS-70A Explosion Proof Power Supply
Features/Ratings
Line In: 120VAC
Class 1 Division 1 Explosion Proof
Line Out: (4) 2023 C1D1 12V or 24V DC Twist Lock Receptacles
2023, Class 1, Division. 1 Receptacles
Wiring: 25' SOOW with 15amp, 120v Plug
20 Amp Primary Rating
Dimensions: 30”-H x 14”-D x 24”- W
Weight: 105lbs
Mounting: Portable Dolly Cart with Wheels
Ratings: Class 1 Division 1 Explosion Proof
Special Orders- Requirements
Battery: 70ah Sealed Lead Acid
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
*All grounding shall comply with state and local codes and meet the
minimum requirements of the National Electronic Code section 250*
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further
information if required.
Rental Prices for the RNT-EPL-RPS-70A-12V;
Monthly...$1,732.50 USD
Weekly...$1155.00 USD
Scroll Down to Purchase
02/09/2015
Page: 7
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 8
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* 300 Watt Explosion Proof Quadpod Mount Light Tower - Dual 150 Watt LED Light Heads - 300'
Part #: RNT-EPL-TP-2X150LED-300
Price: $6,035.71
02/09/2015
Page: 9
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in USA
*THIS UNIT IS FOR RENTALS*
The RNT-EPL-TP-2X150LED-300 Explosion Proof LED Light from Larson Electronics is rated Class 1 Division 1 Groups C and D and
uses two 16 inch LED light heads to produce 20,000 lumens of light while drawing only 300 watts.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS*
The RNT-EPL-TP-2X150LED-300 is a quadpod mounted explosion proof LED light and provides 15,000 square feet of work area coverage with
20,000 lumens of light output. This portable LED quadpod light has dual removable LED light heads measuring 16 inches in diameter each
mounted on top of a two wheeled aluminum quadpod for easy positioning of the unit from one area of the workspace to another. The LED light
head on this unit produces a wide flood pattern of light that is ideal for illuminating enclosed areas such as tanks and containers and is suitable
for hazardous locations where flammable vapors, gases and dusts may be present.
Click Photo to Enlarge
Click Photo to Enlarge
This portable LED light quadpod is comprised of two removable 16 inch LED light heads mounted atop a solid rubber wheeled cart fabricated
from non sparking aluminum. The non sparking, adjustable and collapsible quadpod can be extended to twelve feet and collapsed to four feet
while wheels on the base enable the operator to tilt the unit back and simply roll the entire assembly to a new location. The hazardous
location LED light fixtures can be removed by releasing the hand knob and sliding the light and mounting bracket off of the quadpod support
while the legs can be collapsed, aiding in deployment, storage and transport. The lamp can be easily adjusted up, down or from side to side and
locked into position. Included with this LED light quadpod is 300 feet of SOOW cord which combined with the 360 degrees of rotation and 90
degrees of tilt offered by the LED light head provides an effective alternative to often cumbersome explosion proof string lights.
The LED light heads on this unit measures 16 inches in diameter each which allows it to fit through most standard size manholes and entry
points. The LED light head can be removed from the quadpod, the quadpod collapsed, and the entire assembly passed through a manhole and
reassembled once inside.
This unit is also multi-voltage capable and can configured to operate on 120-277 volts 50/60 Hz. This lamp is T5 temperature rated and the LED
light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps. The light head can be
removed and used separately from the quadpod for added convenience.
Made in USA Quality
Superior LED Benefits
1. Approved Class 1 Div1-2 Class 2 Div I-2
2. Led lamp head requires no lamping and simply slides on the
quadpod and is locked into place with a hand tightened set screw.
3. Quadpod constructed of corrosion resistant aluminum.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs.
6. Solid rubber tires. No flats or tube replacements.
7. 25 peel off mylar overspray lamp protectors ship with the unit.
8. 20,000 Lumens produced from only 300 watts.
9. Mercury free shock proof LED lamp light head.
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
9. Vibration/impact resistant.
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
02/09/2015
Page: 10
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-TP-2X150LED-300 Explosion Proof LED Quadpod
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 16" Light heads - 4' to 12' Extendible Quadpod
Class 1 Division 2, Group A,B,C,D
Weight: 50 lbs.
Class II, Division 1 - 2, Groups E,F,G
Total Watts: 300 watts
UL Certified U.S. Standards
Voltage: 120V-60hz 220V-50hz 240V-60hz 277V-60hz
ECP1523 Class 1 explosion proof plug
LED Lamp Lumens: 20,000
LED Lamp Life Expectancy: 60,000 Hours
Mounting: Non Sparking Wheeled Aluminum Quadpod
Wiring: 300 feet SOOW Cord Explosion Proof Straight Blade Plug
Operating Temp Range: T4A Rated -40C to 60C
Special Orders- Requirements
Beam Lux(per lamp): 8500@ 1 Meter 1250@ 3 Meters
Contact us for special requirements
Color Temp: 6000K
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental prices for the RNT-EPL-TP-2X150LED-300;
Monthly...185.50 .00 USD
Weekly...111.00 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 11
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof LED String Light - 10 Individual LED Drop Lights - Class I, Div. I - RENTAL
Part #: RNT-EPL-SL-10-LED
Price: $4,618.20
02/09/2015
Page: 12
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
This Unit is for Rentals
The Larson Electronics RNT-EPL-SL-10-LED Explosion Proof String Light set is U.L. approved Class 1 Division 1 Groups C and D - and
is ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection.
Click here to see the Incandescent version of this light
This explosion proof string light set from Larson Electronics contains a total of ten 10 watt work lights equipped with aluminum hooks and
connected in series along 100 feet of 14/3 SOOW explosion proof cord. A molded T junction is mounted every ten feet, with 3 feet of 16/3 SOOW
cord connecting a single drop light to the backbone. The cord on this unit is terminated with a 1523P Class 1, Division 1 explosion proof plug for
complete protection. With this arrangement, each drop light cannot spark if pulled apart or dragged. An 25 foot tail section of main SOOW cord is
included to allow ample length for connection to power sources.
10 Watt LED Bulb
Click Photos to Enlarge
Molded T Connector w/ Hook Ring
25' whip w/ EXP Plug
Click Photos to Enlarge
Click Photos to Enlarge
100 Watt Incandescent Bulb
With the RNT-EPL-SL-10-LED
02/09/2015
Page: 13
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This unit incorporates ten explosion proof LED hand lamps connected in series and is suitable for use in areas where petrochemical vapors and
various dusts are present. The machined aluminum housings, cast aluminum guard, tempered glass lamp globe, and abrasion resistant cord
make this a very durable unit that will resist damage from chemicals, abrasion, vibrations and impacts. This string lighting solution will provide the
lighting you require in a flexible, easy to manage configuration. The hand lamps can be moved around and hooked to different points on your
scaffold. The lights, however must remain within 10 feet of one other. Each molded T section contains a hook eyelet, allowing operators to
suspend the entire backbone off the ground and out of the work space.
This stringer light set is Class 1, Division 1 rated for Groups C and D and Class II, Division 1 Groups F and G. This unit is multi-voltage and
configured to operate on 120-277V AC or 12-24V DC, please choose your configuration below.
Stringer Energy Consumption Comparison
Incandescent
CFL
LED
Wattage
1000 watts
260 watts
100 watts
Amp Draw @ 120V AC
8.34 amps
2.17 amps
0.84 amps
Amp Draw @ 277V AC
3.61 amps
0.94 amps
0.36 amps
Amp Draw @ 12V DC
83.34 amps
21.67 amps
8.34 amps
Amp Draw @ 24V DC
41.67 amps
10.84 amps
4.17 amps
Lamp Life Expectancy
1,500 hours
8,000 hours
50,000 hours
2800K
4300K
6000K
$321.2
$83.52
$32.12
Color Temperature
Operation cost per year
(8hs/day @ 11c/kWh)
Made in USA Quality
Lamp Features
1. Federal Spec Cord.
2. Explosion Proof.
100 watts of LED illumination
Non-sparking aluminum housings
3. Total of (10) 10 watt LED Lamps.
4. Non-sparking aluminum construction.
Light weight mold T Juctions
Cast aluminum guard prevent lamp or globe damage
5. UL Class 1 Div 1 Class 2 Div1
7. 120-277V AC or 12-24V DC Operation
Temptered Soda-Lime Glass Lamp Globe
Integrated lamp shock absorbers prevent drop damage
8. SOOW cable.
9. Aluminum Hooks for Convenient Placement.
Swivel hook for hanging and hands free operation
14/3 SOOW Abrasion Resistant Cable
02/09/2015
Page: 14
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-SL-10-LED
U.L. Ratings
UL Listing: United States
Class 1, Divisions 1 & 2, Groups C, D
Dimensions- Each Lamp: L-16.5" Diam-5"
Class 2, Divisions 1 & 2, Groups, F, G
Total Watts: 100
Class 1, Zone 1, Group IIB
Single Lamp Watt: 10 watts
NEMA 4X
Voltage: 120-277V AC or 12-24V DC
Amps: 0.84 120V AC
Mounting: Handheld / Hanging via Aluminum Hooks
Special Orders- Requirements
Wiring: 100' 14/3 SOOW Cable - 15A EXP Plug
Contact us for special requirements
Total Length: 125'
Toll Free: 1-800-369-6671
Single Lamp Weight: 6 lbs
Intl: 1-903-498-3363
Total Weight: 65 lbs
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other
paperwork, Larson Electronics processes rentals like purchases until
the product is returned. (Rent to Own Rates) This means, we will
charge the customer for the product total and credit back the difference
once the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EPL-SL-10-LED;
Monthly...$935.00 USD
Weekly...$560.00 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Rent- Same Day Shipping on This Light!
02/09/2015
Page: 15
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 16
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- Hi-Res Image 1
- Hi-Res Image 2
- Hi-Res Image 3
- Hi-Res Image 4
- Hi-Res Image 5
- Hi-Res Image 6
- Hi-Res Image 7
02/09/2015
Page: 17
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof, 150 Watt LED Tank Light on Quadpod - Class I, Div. I - 100' SOOW Cord - RENTAL
Part #: RNT-EPL-TP-1x150LED-100
Price: $4,250.00
02/09/2015
Page: 18
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
This unit is for rentals
The RNT-EPL-TP-1x150LED-100 Explosion Proof LED Light from Larson Electronics is rated Class 1 Division 1-2 Groups C & D and
Class 2 Division 1-2 and uses a 16 inch LED light head to produce 10,000 lumens of light while drawing only 150 watts.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS*
The RNT-EPL-TP-1x150LED-100 is a quadpod mounted explosion proof LED light and provides 8,000 square feet of work area coverage with
10,000 lumens of light output. This portable LED quadpod light has a removable LED light head measuring 16 inches in diameter mounted on top
of a two wheeled aluminum quadpod for easy positioning of the unit from one area of the workspace to another. The LED light head on this unit
produces a wide flood pattern of light that is ideal for illuminating enclosed areas such as tanks and containers and is suitable for hazardous
locations where flammable vapors, gases and dusts may be present.
Click Photo to Enlarge
Click Photo to Enlarge
This portable LED light quadpod is comprised of a removable 16 inch LED light head mounted atop a solid rubber wheeled cart fabricated from
non sparking aluminum. The non sparking, adjustable and collapsible quadpod can be extended to twelve feet and collapsed to four feet while
wheels on two of the tripod feet enable the operator to tilt the unit back and simply roll the entire assembly to a new location. The explosion proof
LED light fixture can be removed by releasing the hand knob and sliding the light and mounting bracket off of the quadpod support while the legs
can be collapsed, aiding in deployment, storage and transport. The lamp can be easily adjusted up, down or from side to side and locked into
position. Included with this LED light tripod is 100 feet of SOOW cord which combined with the 360 degrees of rotation and 90 degrees of tilt
offered by the LED light head provides an effective alternative to often cumbersome explosion proof string lights.
The LED light head on this unit measures 16 inches in diameter which allows it to fit through most standard size manholes and entry points. The
LED light head can be removed from the tripod, the quadpod collapsed, and the entire assembly passed through a manhole and reassembled
once inside.
This unit is also multi-voltage capable and can configured to operate on 120-277 volts 50/60 Hz. Further adding to the versatility and
convenience of this LED light tripod are 25 peel off mylar overspray lamp protectors that ship with the unit. The protectors provide lamp
protection from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This
lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or
fluorescent lamps. The light head can be removed and used separately from the tripod for added convenience.
Made in USA Quality
Superior LED Benefits
02/09/2015
Page: 19
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
1. Approved Class 1 Div1-2 Class2 Div I-2
3. 100% recyclable.
2. Led lamp head requires no lamping and simply slides on the
4. No toxins-lead, mercury.
quadpod and is locked into place with a hand tightened set screw.
5. No UV light, infrared radiation or CO2 emissions.
3. Quadpod constructed of corrosion resistant copper free aluminum.
6. Bright, even light maintains consistent color over time.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs. 7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
6. Solid rubber tires. No flats or tube replacements.
9. Vibration/impact resistant.
7. 25 peel off mylar overspray lamp protectors ship with the unit.
10. Significantly cooler operation.
8. 10,000 Lumens produced from only 150 watts.
11. Less frequent outages, higher output improves workplace safety.
9. Mercury free shock proof LED lamp light head.
Specifications / Additional Information
RNT-EPL-TP-1x150LED-100 Explosion Proof LED Quadpod
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 16' Light head - 4' to 12' Extendible Quadpod
Class 1 Division 2, Group A,B,C,D
Weight: 50 lbs.
Class II, Division 1 - 2, Groups E,F,G
Total Watts: 150 watts
UL Certified U.S. Standards
Voltage: 120V-60hz 220V-50hz 240V-60hz 277V-60hz
ECP1523 Class 1 explosion proof plug
LED Lamp Lumens: 10,000
LED Lamp Life Expectancy: 60,000 Hours
Mounting: Non Sparking Wheeled Aluminum Tripod
Wiring: 100 feet SOOW Cord Explosion Proof Straight Blade Plug
Operating Temp Range: T5 Rated 40C to 65C
Special Orders/Requirements
Beam Lux:8500@ 1 Meter 1250@ 3 Meters
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental prices for the RNT-EPL-TP-1x150LED-100;
Monthly...$708.00 USD
Weekly...$425.00 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 20
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 21
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 22
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* 300 Watt Explosion Proof LED Light Tower - Quadpod Mount - C1D1 - 300 foot Cord w/ EXP Plug
Part #: RNT-EPL-QP-2X150RT-300
Price: $4,224.38
02/09/2015
Page: 23
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
*This unit is for rentals*
The RNT-EPL-QP-2X150RT-300 Quadpod Mounted Explosion Proof LED Light Tower from Larson Electronics produces 24,000 lumens
of light capable of illuminating an area 8,500 square feet in size. This adjustable LED light tower is designed for portability and durable
operation and ideal for use in demanding conditions.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS*
The RNT-EPL-QP-2X150RT-300 is a quadpod mounted explosion proof LED lighting system and provides 14,500 square feet of work area
coverage with 24,000 lumens of light output. This portable LED light tower has a removable LED light head mounted on top of a four leg durable
non-sparking aluminum quadpod equipped with wheels for easy positioning of the unit from one area of the workspace to another. The LED light
head on this unit produces a wide flood pattern of light that is ideal for illuminating large workspaces and jobsites. This light is designed for heavy
duty use in demanding conditions including emergency services, mining, construction, marine, and industrial operations where durability and
reliability is critical.
This portable LED light is comprised of two adjustable LED light heads mounted atop a four leg quadpod fabricated from non-sparking powder
coated aluminum. This adjustable and collapsible quadpod can be extended to twelve feet, collapsed to seven feet, and includes solid wheels
allow the operator to tilt the unit back and simply roll the entire assembly to a new location when fully deployed. The LED light fixture assembly
can be removed by releasing the hand knob and sliding the light and mounting bracket off of the center support while the legs can be collapsed,
aiding in deployment, storage and transport. The lamp can be easily adjusted vertically and locked into position.
Click Photos to Enlarge
02/09/2015
Page: 24
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Included with this hazardous location LED light tower is 100 feet of SOOW cord which combined with adjustability offered by the LED light head
provides ample length for tower placement and optimal coverage of the workspace. The easy to collapse design of this Class 1 Division 1 LED
work light allows Larson Electronics to avoid pallet freight charges when shipping and deliver these units via UPS next day air service, which in
turn improves delivery time and reduces the cost to buyers.
Each LED light head on this tower contains twelve 12.5 watt LEDs producing 1000 lumens each. These LEDs are arranged in rows and paired
with high purity optics to produce 12,000 lumens and a 60 degree flood beam while only drawing 1.25 amps on 120V, making these units ideal
for use as highly efficient yet powerful work and area lights. The RNT-EPL-QP-2X150RT-300 hazardous location LED light is an ideal
replacement for fragile and hot running 400 watt metal halide floodlights.
The LED light head on this unit is small enough to allow it to fit through most standard size manholes and entry points. The LED light head can
also be removed from the quadpod, the tower collapsed and the entire assembly passed through a manhole and reassembled once inside. This
unit is multi-voltage capable and configured to operate on 120-277 volts 50/60 Hz. This LED light head retains 80% of its lumen output after
50,000 hours of use, far longer than incandescent or fluorescent lamps.
Made in USA Quality
Superior LED Benefits
1. Approved Class 1 Div1-2 Class 2 Div I-2
2. Led lamp head requires no lamping and simply slides on
the quadpod and is locked into place with a hand tightened set screw.
3. Quadpod constructed of corrosion resistant, non-sparking aluminum
with powder coated finish.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs.
6. Solid rubber tires. No flats or tube replacements.
7. 24,000 Lumens produced from only 300 watts.
8. Mercury free shock proof LED lamp light head.
02/09/2015
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
9. Vibration/impact resistant.
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
Page: 25
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-QP-2X150RT-300 Explosion Proof LED Quadpod
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D\
Dimensions: 14"-W 16"-H 5"-D- Light Head - 7' to 12' Extendible
Tower
Class 1 Division 2, Group A,B,C,D
Weight: 105 lbs.
Class II, Division 1 - 2, Groups E,F,G
Total Watts: 300 watts
UL Certified U.S. Standards
Voltage: 120-277 VAC 50/60Hz
ECP1523 Class 1 explosion proof plug
Lighting Configuration: 60° Flood Pattern
Wheeled Adjustable Tower 7 - 12 Feet
LED Lamp Life Expectancy: 50,000 Hours
100 Foot Cord
Mounting: Non-Sparking Wheeled Aluminum Quadpod
DLC Approved
Wiring: 300 feet SOOW Cord w/ EPP-15A Explosion Proof Plug
Total Lumens: 24,000
Special Orders- Requirements
Color Temp: 6000K
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental prices for the RNT-EPL-QP-2X150RT-300;
Monthly...185.50 .00 USD
Weekly...111.00 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 26
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 27
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 28
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
2 X 70 Watt Metal Halide Explosion Proof Light on Wheeled Quadpod - Class I, Div. I - RENTAL
Part #: RNT-EPL-TP-2X70-100
Price: $3,976.00
02/09/2015
Page: 29
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
This unit is for Rentals
The Larson Electronics RNT-EPL-TP-2X70-100 Quadpod Mounted Explosion Proof Metal Halide Light is U.L. approved Class 1 & 2,
Division 1 & 2 and is rated for use in wet and marine environments. The quadpod mount and metal halide lamps used with this unit
provide operators with excellent power and efficiency coupled with high versatility and ease of use.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS*
Two 70 watt, explosion proof, metal halide lamps mounted on our non-sparking adjustable and wheeled quadpod gives operators an easily
deployable source of powerful light that can be quickly setup and adjusted to effectively illuminate hazardous work areas. This unit contains two
70 watt, dual ended, metal halide lamps and is capable of illuminating 26,000 square feet of work space with 65,000 lumens of light. The two 70
watt metal halide lamps on this unit produce illumination equivalent to two typical 400 watt halogen lamps while drawing only 140 watts at 1.1
amps.
The metal halide lamps run cooler than 400 watt halogen lamps, resulting in an easier to handle unit and less heat in the workspace. This unit's
durability, easy deployment, high power and the good color rendering of its metal halide lamps make it ideal for close work and hazardous areas
where safety, detail and accuracy are critical.
Click Photo to Enlarge
Click Photo to Enlarge
The non sparking adjustable and collapsible quadpod can be extended to eight feet and collapsed to four and a half feet while wheels at the base
of the quadpod allow the operator to tilt the unit back and reposition it to a new location. The explosion proof light fixtures can be removed by
releasing the hand knob and sliding the light and mounting bracket off of the quadpod center support while the legs can be collapsed, aiding in
deployment, storage and transport. The quadpod affords operators the ability to quickly and securely elevate the lamps, increasing their effective
coverage of the work area. The lamps can be easily adjusted up, down or from side to side and locked into position.
The lamp housings are waterproof and constructed of thick copper free aluminum alloy, making this unit ideal for use in wet and marine
environments. The metal halide lamps provide 26,000 square feet of coverage with good color rendering and object contrast.
This units' lamp assemblies each include a 70 watt metal halide bulb, internal ballast and aluminum finish reflector in a copper-free cast
aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is
constructed of 3/4" thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying
lubricant. The metal halide lamps have no filament and are thus highly resistant to damage from shocks or impacts, greatly reducing the chances
of damage should the tower be knocked over, unlike incandescent lamps which may break or shatter.
The lamps are rated at 2500+ hours of life providing longer service life than typical halogen lamps. This tripod mounted light system operates
with 120 VAC and is supplied with 100 feet of 16/3 SOOW cord ending in an explosion proof straight blade plug.
Suggested Applications: include but are not limited to... wastewater treatment plants, refinery tanks, oil and gasoline loading docks, coal
pulverizing facilities, munitions storage areas, tunnel projects, utility gas plants, power plant areas, hazardous areas and mining conveyor belts.
Made in the USA Quality
Metal Halide Benefits
02/09/2015
Page: 30
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
1. High Efficiency Metal Halide lamps.
2. 70 Watt Lamps Compare to 400W Halogen.
3. Rugged Die Cast Aluminum Lamp Housing.
4. 3/4" Shock Resistant Tempered Glass Lens.
5. Copper Free Shell, Covers and Sealed Fittings.
6. Vibration/Impact Resistant Construction.
7. Low Maintenance.
8. Quadpod Adjustable from 4.5 to 8 Foot Height.
9. 100 foot 16/3 SOOW Cord.
10. UL Approved for Marine Environments.
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering.
5. Vibration and shock resistant.
6. Low maintenance.
Specifications / Additional Information
RNT-EPL-TP-2X70-100 Quadpod Mounted
U.L. Ratings
UL Listing: United States - Canada
Class I & II, Div 1 & 2, Groups C,D
Dimensions Lamp Only: W-13 1/4" D-12 1/2" H-11 1/2"
Class II Div 1 & 2, Groups F, G
Weight: 95 lbs. including quadpod
Class III
Total Watts: 140 watts
UL 781 listed portable HAZLOC use
Voltage: 120 Volts AC, 1.1 amp draw
ECP 1523 5-15P explosion proof plug
Coverage: 26,000 square feet
UL Certified- U.S - CSL
Lamp Life Expectancy: 25000+ Hours
Lamp Type: Metal Halide
Operating Temp Range: T4 rated
Mounting: 4.5' to 8' Extendible Wheeled quadpod
Special Orders- Requirements
Wiring: 100 ft. SOOW Cord ECP1523 plug
Contact us for special requirements
Total Lumens: 65,000
Toll Free: 1-800-369-6671
U.L Approval: U.S Certificate Canada Certificate
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like orders until the product
is returned. This means, we will charge the customer for the product
total and credit back the difference once the fixture is returned. Weekly
and Monthly terms are available. Customer must pay shipping to and
from the destination. Please contact us at (903) 498-3363 for further
information if required.
Rental Prices for the RNT-EPL-TP-2X70-100;
Monthly...$875.00 USD
Weekly...$524.00 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 31
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 32
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 - Hi-Res Image 5 -
02/09/2015
Page: 33
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof String Lights - 10 Individual Incandescent Hand Lamps - Class I, Div. I - RENTAL
Part #: RNT-EPL-SL-10
Price: $3,850.00
Made in the USA
This Unit is for Rentals
The Larson Electronics RNT-EPL-SL-10 Explosion Proof String Light set is U.L. approved Class 1 Division 1
Groups C and D - and is ideal for general close work and inspection activities in hazardous locations requiring
explosion proof protection.
This explosion proof string light set from Larson Electronics contains a total of ten, 26 watt, 60 watt or 100 watt work lights
depending upon configuration, equipped with aluminum hooks and connected in series along 180 feet of 12/3 SOOW
explosion proof cord. A fully potted aluminum junction box is mounted every ten feet, with 3 feet of 16/3 SOOW cord
connecting a single drop light to each box. The cord on this unit is terminated with a 1523P Class 1, Division 1 explosion
proof plug for complete protection. With this arrangement, each drop light cannot spark if pulled apart and the aluminum
junction boxes will not spark if dragged. An 80 foot tail section of main SOOW cord is included to allow ample length for
connection to power sources.
This unit incorporates ten drop lights connected in series and is suitable for use in areas where petrochemical vapors and
various dusts are present. The aluminum housings with rubber bumper guards, polycarbonate lamp covers and abrasion
resistant cord make this a very durable unit that will resist damage from chemicals, abrasion, vibrations and impacts. This
string lighting solution will provide the lighting you require in a flexible, easy to manage configuration. The hand lamps can
be moved around and hooked to different points on your scaffold. The lights, however must remain within 10 feet of one
other.
This string light set is Class 1, Division 1 rated for Groups C and D with the 100 watt bulb option and Class II, Division 1
Groups F and G with a 60 Watt bulb maximum for compliance to the Class 2 rating. This unit qualifies for both Class 1
Division 1 and Class 2 Division 1 with the optional 26 Watt Compact Fluorescent bulb. Choose your lamp wattage and type
below when ordering. This unit can also be ordered in 120VAC, 220VAC or 240VAC configuration for operation with these
voltages.
Made in USA Quality
Lamp Features
1. Federal Spec Cord.
2. Explosion Proof.
3.8- Total of 10- 100 watt, 60 watt or 26 Watt Lamps.
4. Rugged fabricated steel and cast aluminum construction.
5. Blue and Gray paint finish.
Up to 1000 watts of illumination
Non-sparking aluminum housings
Non sparking aluminum junction boxes
Molded rubber bumper guard
6. UL Class1 Div1 Class 2 Div1
7. 120VAC Operation
8. SOOW cable.
9. Aluminum Hooks for Convenient Placement.
02/09/2015
polycarbonate shields prevent bulb damage
Integrated lamp shock absorbers prevent drop damage
Swivel hook for hanging and hands free operation
Explosion proof cord
Page: 34
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-SL-10
U.L. Ratings
UL Listing: United States
Class 1, Division 1 Groups C, D
Dimensions- Each Lamp: L-16.5" Diam-5"
Class 2, Division 2 Groups , F, G
Total Watts: 1000, 600, or 260 Depending on Lamp Option
Single Lamp Watt: 26, 60 or 100 watts
Voltage: Stnd-120VAC-60Hz, 220VAC-50Hz, or 240VAC-60Hz
Amps: 6.25
Mounting: Aluminum Hooks
Wiring: 180' SOOW Cord- 1523P Plug
Outlet Protection: GFCI Required at Power Source
Total Length: 150'
Special Orders- Requirements
Total Weight:145lbs
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like
orders until the product is returned. This means, we will charge the customer for the product total and credit back the
difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from
the destination. Please contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EPL-SL-10;
Monthly...$1400.00 USD
Weekly...$933.00 USD
Scroll Down to Purchase- Same Day Shipping on This Light!
Links (Click on the below items to view):
- Dimensional Drawing
02/09/2015
Page: 35
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof LED Lights on Cart w/ Wheels - 4 foot, 4 LED lamps *RENTAL*
Part #: RNT-EPLC-48-4L-LED
Price: $3,847.53
Made in the USA
*THIS UNIT IS FOR RENTALS*
The Larson Electronics RNT-EPLC-48-4L-LED Explosion Proof LED Light Cart rental unit is U.S./Canada U.L. approved Class 1 Division
1, Class 2 Division 1 and offers exceptional LED lamp durability, efficiency, 50,000 hour lamp life, and versatile explosion proof
protection for operators working in hazardous locations.
The RNT-EPLC-48-4L-LED rental explosion proof light cart is UL listed Class 1 Division 1 and Class 2 Division 1 & 2 and offers the ability to
quickly and easily add light wherever it is needed. This unit incorporates our highly effective EPL-48-4L-LED explosion proof fixture equipped
with four 24 Watt LED T-series tube lights into a mobile platform. The platform is constructed of corrosion resistant aluminum alloy, has non
sparking casters, and includes a Class 1 Div 1 Explosion Proof Switch with 50 foot of SOOW electric cable as well. This T6 temperature rated
explosion proof LED light cart offers superior LED benefits in the form of reduced operating and maintenance costs, extreme lamp life, and high
resistance to impacts and vibration.
This unit is an excellent rental lighting solution for operators who need full power illumination in areas where traditional fixed mount lighting is
obstructed or cannot effectively reach.
02/09/2015
Page: 36
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photos to Enlarge
Click Photos to Enlarge
02/09/2015
Click Photos to Enlarge
Page: 37
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
There is no ballast in this unit and the included LED T-series lamps have a 50,000+ hour service life, both of which result in extreme efficiency,
cooler operation and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage
from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The lamps are protected by heat
and impact resistant Pyrex tubes which provide added security against impacts and overspray. The light fixture is constructed of copper free
aluminum alloy and the entire unit ships with a 50' SOOW cord and explosion proof plug. The lamp reflectors are corrosion resistant heavy gauge
aluminum and coated with a high gloss 93% reflective finish. The cart allows the entire fixture to be adjusted through 270 degrees of rotation to
position the lights as needed.
These LED-T series 24 watt LED lamps produce more illumination per watt than standard T8 bulbs, but draw only 3/4 of current. A standard EPL48-4L-T8 explosion proof fluorescent light, with a combined total of 128 watts, draws 1.07 amps @ 120 volts. The LED version of the same light,
with a total of 96 watts, draws only 0.9 amps. The EPLC-48-4L-LED is multi-voltage (not multi-tap) and works on the following voltages: 120 Volt
60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. The unit is also offered in low voltage to accommodate those who need voltage on 12
and 24 volts dc. An explosion proof switch comes standard with the EPLC-48-4L-LED, allowing for simple turning on/off while in a hazardous
area.
Suggested Applications: PAINT SPRAY BOOTHS, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing
plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.
Made in USA Quality
Superior LED Benefits
1. Extreme long life.
1. Each unit dialectically tested.
2. High efficiency and low amp draw.
2. Fixture arrives assembled and lamped to reduce installation time and 3. High durability and reliability.
cost. Adjustable mounting brackets allow the light fixture to be rotated 4. Small size and light weight.
while on the cart through a wide degree of positions for optimal light
placement.
5. 100% recyclable.
6. No toxins-lead, mercury.
3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.
7. High light output..
8. Consistent color over time.
4. No ballast box. No ballast to replace. We simply run the black wire to 9. High Versatility.
one end of the bulb and white wire to the other.
10. No fragile glass used in construction.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective 12. Vibration/impact resistant.
finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture, Cart Features:
while other models require the “tap and knock off” method to loosen the 5” non sparking casters
end cap.
Frame constructed of corrosion resistant aluminum
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp Adjustable fixture brackets to 270 degrees
protection.
8. Spring loaded sockets on both ends hold lamps firmly for maximum
shock and vibration protection.
02/09/2015
50 foot SOOW electric cable
Class I, Div I Explosion Proof Switch
Page: 38
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPLC-48-4L-LED Explosion Proof
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 1, Groups C and D
Dimensions: W-30 " L-58 " H-35.5 "
Class 1 Division 2, Group A,B,C,D
Total Unit Weight: 115 Lbs
UL 595 Outdoor Marine Type (Saltwater)
Total Watts: 96 watts
UL 844, 924
Voltage: 120V-60hz 220V-50hz 240V-60hz 277V-60hz: low voltage
available, 12 or 24 volts dc.
UL 1598 Marine Type
Total Lumens: Led-T series Bulbs 7,680
Class II Division 1- 2, Groups E,F,G
Lamp Life Expectancy: Led-T series Bulbs 50,000+ Hours
UL Certified Canadian Standards
Efficiency: Led-T series Bulbs 90 Lumens per Watt
UL listed for Paint Spray Booths*
Temp Range: T6 Rated* -40C - 85C
Beam Angle: 150 degrees
Special Orders- Requirements
Minimum Operating Temp: -30 C
Contact us for special requirements
Maximum Case Temp: 90 C
Color Temp: 5300K-
Toll Free: 1-800-369-6671
Mounting: Portable Cart with Adjustable Brackets
Intl: 1-903-498-3363
Wiring: 50ft SOOW cord
E-mail: [email protected]
U.L Approval: U.S Certificate Canada Certificate
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EPLC-48-4L-LED;
Monthly...$515 .00 USD
Weekly...$275.00 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
*5 year warranty replacement on this LED light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
02/09/2015
Page: 39
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 40
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 41
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
RNT-HAL-TP-2x150LED-100
Part #: RNT-HAL-TP-2x150LED-100
Price: $3,830.00
Made in the USA
This Unit is a Rental
The RNT-HAL-TP-2X150LED-100 Quadpod Mounted Hazardous Area LED Light from Larson Electronics produces 29,580 lumens of
light capable of illuminating an area 36,000 square feet in size. Weather proof and U.L. listed for marine use, this dual LED fixture
equipped hazardous area light quadpod is a versatile and ideal lighting solution for both hazardous and non hazardous locations.
The RNT-HAL-TP-2x150LED-100 is a quadpod mounted hazardous area LED light and provides 36,000 square feet of work area coverage with
29,580 lumens of light output. This portable LED quadpod light has a removable LED light head mounted on top of a two wheeled aluminum
quadpod for easy positioniong of the unit from one area of the workspace to another. The LED light head on this unit includes two 150 watt LED
fixtures and produces a wide flood pattern of light that is ideal for illuminating enclosed areas such as tanks and containers and is suitable for
hazardous locations where flammable vapors, gases and dusts may be present.
02/09/2015
Page: 42
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
This portable LED light quadpod is comprised of a removable LED light head assembly with dual 150 watt fixtures mounted atop a solid rubber
wheeled cart fabricated from non sparking aluminum. The non sparking, adjustable and collapsible quadpod can be extended to eight feet and
collapsed to three feet while wheels on two of the quadpod feet enable the operator to tilt the unit back and simply roll the entire assembly to a
new location. The explosion proof LED light heads can be removed by releasing the hand knob and sliding the light and mounting bracket off of
the quadpod support while the legs can be collapsed, aiding in deployment, storage and transport. The lamps can be easily adjusted up, down or
from side to side and locked into position. Included with this LED light quadpod is 100 feet of SOOW cord which combined with 90 degrees of tilt
offered by the LED light head provides an effective alternative to often cumbersome explosion proof string lights.
The lamp housings on this quadpod are weatherproof and constructed of die cast aluminum featuring hinged, removable front-access doors with
captive closure screws for easy servicing and heat/impact-resistant tempered flat door glass. Each hazardous location light head contains thirty
CREE XLamp XPG® five watt LEDs producing 493 lumens each. These LEDs are arranged in rows and paired with high purity optics to produce
a 60 degree flood beam while only drawing a combined 2.50 amps on 120V, making these units ideal for use as highly efficient yet powerful work
and area lights. The HAL-TP-2X150LED-100 quadpod mounted hazardous location LED light is an ideal replacement for fragile and hot running
400 watt metal halide floodlights.
This unit is also multi-voltage capable and can configured to operate on 120-277 volts 50/60 Hz. These LED lights retains 80% of their lumen
output after 50,000 hours of use, far longer than incandescent or fluorescent lamps. The light head can be removed and used separately from the
quadpod for added convenience.
Made in USA Quality
Superior LED Benefits
1. Approved Class 1 Division 2
2. Led lamp heads require no lamping and simply slides on the
quadpod and are locked into place with a hand tightend set screw.
3. Quadpod constructed of corrosion resistant copper free aluminum.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs.
6. Solid rubber tires. No flats or tube replacements.
7. Each LED Light Head Output is Comparable to 400 Watt Metal
Halide.
8. 29,580 Lumens produced from only 300 total watts.
9. Mercury free shock proof LED lamp light heads.
02/09/2015
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
9. Vibration/impact resistant.
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
Page: 43
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-HAL-TP-2x150LED-100 Hazardous Area LED Quadpod
Quick Summary
Lamp Type: CREE XLamp-XPG® LED
Class-1 Division 2- Groups A,B,C,D
Dimensions: 14 "-Depth, 11"-H, 15 "W Single Light Head
UL1598 Outdoor Marine Use
Tower Dimensionst: 3' to 8' Extendable Quadpod
IP65 Construction
Total Watts: 300 watts
T1 Temperature Rating
Voltage: 120/277 VAC 50/60Hz
Not Approved For Confined Spaces
Lighting Configuration: 60° Flood Pattern
LED Lamp Life Expectancy: 50,000 Hours
Mounting: Non Sparking Wheeled Aluminum Quadpod
Wiring: 100 feet SOOW Cord Explosion Proof Straight Blade Plug
Total Lumens: 29,580
Special Orders- Requirements
Weight: 70 Lbs
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-HAL-TP-2x150LED-100;
Monthly...638.00 USD
Weekly...310.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 44
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 45
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 46
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- Hi Res Image1
- Hi Res Image2
- Hi res Image3
- Hi Res Image4
- hi Res Image5
- Hi Res Image6
- Hi Res Image7
- Hi Res Image8
02/09/2015
Page: 47
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof Quadpod Mount - Single 150 Watt Led Light - 300 foot cord *RENTAL*
Part #: RNT-EPL-TP-1X150LED-300
Price: $3,621.43
02/09/2015
Page: 48
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in USA
This Unit Is For Rentals
The RNT-EPL-TP-1X150LED-300 Explosion Proof LED Light from Larson Electronics is rated Class 1 Division 1 Groups C and D and
uses a 16 inch LED light head to produce 10,000 lumens of light while drawing only 150 watts.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS*
The RNT-EPL-TP-1X150LED-300 is a quadpod mounted explosion proof LED light and provides 8,000 square feet of work area coverage with
10,000 lumens of light output. This portable LED quadpod light has a removable LED light head measuring 16 inches in diameter mounted on top
of a two wheeled steel quadpod for easy positioning of the unit from one area of the workspace to another. The LED light head on this unit
produces a wide flood pattern of light that is ideal for illuminating enclosed areas such as tanks and containers and is suitable for hazardous
locations where flammable vapors, gases and dusts may be present.
Click Photo to Enlarge
Click Photo to Enlarge
This portable LED light quadpod is comprised of a removable 16 inch LED light head mounted atop a solid rubber wheeled cart fabricated from
non sparking aluminum. The non sparking, adjustable and collapsible quadpod can be extended to twelve feet and collapsed to four feet while
wheels on the base enable the operator to tilt the unit back and simply roll the entire assembly to a new location. The explosion proof LED light
fixture can be removed by releasing the hand knob and sliding the light and mounting bracket off of the quadpod support while the legs can be
collapsed, aiding in deployment, storage and transport. The lamp can be easily adjusted up, down or from side to side and locked into position.
Included with this LED light quadpod is 300 feet of SOOW cord which combined with the 360 degrees of rotation and 90 degrees of tilt offered by
the LED light head provides an effective alternative to often cumbersome explosion proof string lights.
The LED light head on this unit measures 16 inches in diameter which allows it to fit through most standard size manholes and entry points. The
LED light head can be removed from the quadpod, the quadpod collapsed, and the entire assembly passed through a manhole and reassembled
once inside.
This unit is also multi-voltage capable and can configured to operate on 120-277 volts 50/60 Hz. This lamp is T5 temperature rated and the LED
light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps. The light head can be
removed and used separately from the quadpod for added convenience.
Made in USA Quality
Superior LED Benefits
02/09/2015
Page: 49
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
1. Approved Class 1 Div1-2 Class 2 Div I-2
3. 100% recyclable.
2. Led lamp head requires no lamping and simply slides on the
4. No toxins-lead, mercury.
quadpod and is locked into place with a hand tightened set screw.
5. No UV light, infrared radiation or CO2 emissions.
3. Quadpod constructed of corrosion resistant aluminum.
6. Bright, even light maintains consistent color over time.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs. 7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
6. Solid rubber tires. No flats or tube replacements.
9. Vibration/impact resistant.
7. 25 peel off mylar overspray lamp protectors ship with the unit.
10. Significantly cooler operation.
8. 10,000 Lumens produced from only 150 watts.
11. Less frequent outages, higher output improves workplace safety.
9. Mercury free shock proof LED lamp light head.
Specifications / Additional Information
RNT-EPL-TP-1X150LED-300 Explosion Proof Quadpod
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 16" Light head - 4' to 12' Extendible Quadpod
Class 1 Division 2, Group A,B,C,D
Weight: 95 lbs.
Class II, Division 1 - 2, Groups E,F,G
Total Watts: 150 watts
UL Certified U.S. Standards
Voltage: 120V-60hz 220V-50hz 240V-60hz 277V-60hz
ECP1523 Class 1 explosion proof plug
LED Lamp Lumens: 10,000
LED Lamp Life Expectancy: 60,000 Hours
Mounting: Non Sparking Wheeled Aluminum Quadpod
Wiring: 300 feet SOOW Cord Explosion Proof Straight Blade Plug
Operating Temp Range: T4A Rated -40C to 60C
Special Orders- Requirements
Beam Lux: 8500@ 1 Meter 1250@ 3 Meters
Contact us for special requirements
Color Temp: 6000K
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
YOU CAN RENT THIS UNIT. Contact 1-800-369-6671 to make
arrangements.
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental prices for the RNT-EPL-TP-1X150LED-300;
Monthly...$487.50 USD
Weekly...$325.00 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 50
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 51
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
02/09/2015
Page: 52
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof LED Tank Light - 10,000 Lumen LED - Class I, Div. I & Class I, Div. II - RENTAL
Part #: RNT-EPL-16C-1MLED
Price: $3,450.24
Made in the USA
This Unit is for Rentals
The EPL-16C-1MLED Explosion Proof Portable Tank Light from Larson Electronics is rated Class 1 Division 1-2 Groups C&D and Class
II Division 1-2 and uses LEDs to produce 10,000 lumens of light while drawing only 150 watts.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHT CART*
The EPL-16C-1MLED is a cart mounted explosion proof LED light that provides 8,000 square feet of work area coverage with 10,000 lumens of
light output. This portable LED cart light has a removable light head measuring 16 inches in diameter which allows the unit to fit through the
standard sized manholes or entry passages commonly found in the petrochemical and marine industries. Often simply referred to as a “tank
light”, this unit is considered universal due to its ability to be passed through any conventional manhole such as those found in petrochemical
containers and ship storage tanks. The LED light head produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and
further adds to this units desirability as a portable tank lighting solution.
02/09/2015
Page: 53
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Page: 54
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This portable LED light cart is comprised of a removable 16 inch LED light head mounted atop a solid rubber wheeled cart fabricated from non
sparking aluminum. Transferring the unit through manholes consists of simply removing the light head from the cart, passing the light head and
cart through the manhole separately, and then reassembling the unit once inside. Included with this LED light cart is 250 feet of SOOW cord
which combined with the 360 degrees of rotation and 90 degrees of tilt offered by the LED light head provides an effective alternative to often
cumbersome explosion proof string lights.
This unit is also multi-voltage capable and can configured to operate on 120-277 volts 50/60 Hz. Further adding to the versatility and
convenience of this LED light cart are 25 peel off Mylar overspray lamp protectors that ship with the unit. The protectors provide lamp protection
from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This lamp is T5
temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent
lamps. The light head can be removed and used separately from the cart for added convenience.
Made in USA Quality
Superior LED Benefits
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
2. Fixture arrives assembled and lamped to reduce installation time and 3. 100% recyclable.
4. No toxins-lead, mercury.
cost.
5. No UV light, infrared radiation or CO2 emissions.
3. Cart constructed of corrosion resistant copper free aluminum.
6. Bright, even light maintains consistent color over time.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs. 7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
6. Solid rubber tires. No flats or tube replacements.
9. Vibration/impact resistant.
7. 25 peel off Mylar overspray lamp protectors ship with the unit.
1. Class 1 Division 1-2 Class II Division 1-2 Approved
8. 10,000 Lumens produced from only 150 watts.
9. Mercury free shock proof LED lamp light head.
02/09/2015
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
Page: 55
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
EPL-16C-1MLED Explosion Proof Tank Light
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 16' Light head
Class 1 Division 2, Group C, D
Weight: 65 lbs.
Class II, Division 1 - 2, Groups E,F,G
Total Watts: 150 watts
cETL Certified to UL844 and C22.2 Standards
Voltage: Configurable 120V-60hz 220V-50hz 240V-60hz 277V-60hz ECP1523 Class 1 explosion proof plug
Operating Temp Range: T5 Rated 40C to 85C
LED Lamp Life Expectancy: 60,000 Hours
Mounting: Non Sparking Aluminum Cart
Wiring: 250' SOOW Cord Explosion Proof Straight Blade Plug
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental prices for the RNT-EPL-16LED-BP;
Monthly...$650.00 USD
Weekly...$390.00 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental
period. When returned, deductions will also be made for shipping,
repairs, and excessive cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 56
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 57
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
02/09/2015
Page: 58
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Tank Light - 400 Watt Metal Halide - Class I, Div. II - 18" OD - RENTAL
Part #: RNT-EPL-18C-1X4
Price: $2,875.19
This Unit is for Rentals
The RNT-EPL-18C-1X4 Explosion Proof Portable Tank Light from Larson Electronics is rated Class 1 Division 1 Groups C & D and uses
a 400 watt metal halide lamp to produce 75,000 lumens of light capable of illuminating 20,000 square feet of work area.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHT CART*
The RNT-EPL-18C-1X4 explosion proof portable tank light is U.L. approved Class 1, Division 1 for Groups C and D and provides 20,000 square
foot of coverage with a 75,000 lumen light output. This unit consists of a 400 watt metal Halide lamp mounted on top of an aluminum cart with
solid rubber wheels and provides a portable and easily mobile source of hazardous location illumination. Often simply referred to as a “tank light”,
this unit is considered universal due to its ability to be passed through any conventional manhole such as those found in petrochemical
containers and ship storage tanks. This 17 7/8” diameter metal halide lamp fixture is considered a universal tank light as it can be easily passed
through most conventional manholes and entryways 18” or larger in size.
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Click Photo to Enlarge
Page: 59
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The RNT-EPL-18C-1X4 explosion proof portable tank light carries a T3B temperature rating and contains a 400 watt metal halide lamp that
produces 75,000 lumens of light capable of illuminating 20,000 square feet of workspace. The metal halide lamp has a stamped aluminum lamp
guard and replaceable Plexiglas lens protecting the lamp from dirt and debris and can be easily removed and cleaned, reducing the need for
removal and cleaning of the lamp itself. The cart assembly is constructed of aluminum with stainless steel fasteners and has two solid rubber
wheels and two integral handles, allowing this unit to be easily relocated around the work area as needed. The cart and lamp assembly are two
pieces and designed to be easily disassembled without tools, passed through manholes and then reassembled once inside the tank or enclosed
area. Included with this unit is 250 feet of SOOW cord and a lamp fixture assembly that allows 360 degree rotation and 90 degrees of tilt for easy
positioning. This unit can be configured to operate on 120 volts @50/60hz (Americas) or 230/240 volts for international use.
This explosion proof tank light provides a safe, versatile and convenient lighting alternative to sometimes cumbersome string lights and is ideal
for use in confined spaces such as those found in marine storage tanks, the petrochemical and agricultural industries and anywhere large area
confined workspaces require an effective source of Class 1 Division 1 lighting.
Cross for Chambers Power Products PS400MH-18.
Specifications / Additional Information
RNT-EPL-18C-1X4 Explosion Proof Tank Light
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 17 7/8" Light head
Class 2 Division 1 & 2, Groups E, F, G
Weight: 135 lbs.
Class 3, Division 1 & 2
Total Watts: 400 watts
Confined Area Suitable
Voltage: Configurable 120 volts @50/60hz or 230/240 VAC
400 Watt Metal Halide
Operating Temp Range: T3B Rated
UL Certified U.S. Standards
LED Lamp Life Expectancy: 20,000+ Hours (Metal Halide Average)
75,000 Lumens- 20,000 Sq. Ft. Coverage
Mounting: Non Sparking Aluminum Cart
ECP1523 Class 1 explosion proof plug
Wiring: 250 feet 14/3 SOOW Cord- ECP1523 Explosion Proof Plug
T3B Temp Rating
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental prices for the RNT-EPL-18C-1X4
Monthly...$784.00 USD
Weekly...$470.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 60
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 61
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Explosion Proof Tank Light Side
- Hi-Res Image 2 - Explosion Proof Tank Light Light
- Hi-Res Image 3 - Explosion Proof Tank Light Side
- Hi-Res Image 4 -Explosion Proof Tank Light Light
- Hi-Res Image 5 - Explosion Proof Tank Light Front
- Hi-Res Image 6 - Explosion Proof Tank Light Light
- Hi-Res Image 7 - Explosion Proof Tank Light Back
- Hi-Res Image 8 - Explosion Proof Tank Light
- Hi-Res Image 9 - Explosion Proof Tank Light
02/09/2015
Page: 62
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Class I, Div. I Explosion Proof Tank Light - 24" O.D. - 400 Watt Metal Halide - RENTAL
Part #: RNT-EPL-24C-1X4
Price: $2,975.19
Made in the USA
The Larson Electronics RNT-EPL-24C-1X4 Explosion Proof Portable Tank Light from Larson Electronics is rated Class 1 Division 1,
Groups C & D and uses a 400 watt metal halide lamp to produce 75,000 lumens of light capable of illuminating 20,000 square feet of
work area.
This unit is for Rentals
The RNT-EPL-24C-1X4 explosion proof portable tank light is U.L. approved Class 1, Division 1 for Groups C and D and provides 20,000 square
foot of coverage with a 75,000 lumen light output. This unit consists of a 23 7/8 inch diameter 400 watt metal Halide lamp mounted on top of an
aluminum cart with solid rubber wheels and provides a portable and easily mobile source of hazardous location illumination. Often simply referred
to as a “tank light”, this unit is popular for use in tanks due to its ability to be passed through conventional 24 inch manhole openings such as
those found in petrochemical containers and ship storage tanks. This 23 7/8” diameter metal halide lamp fixture is designed specifically for use in
tank cleaning and maintenance operations as an alternative to other less convenient lighting options such a string or drop lights..
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Click Photo to Enlarge
Page: 63
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The EPL-24C-1X4 explosion proof portable tank light carries a T3B temperature rating and contains a 400 watt metal halide lamp that produces
75,000 lumens of light capable of illuminating 20,000 square feet of workspace. The metal halide lamp has a stamped aluminum lamp guard and
replaceable Plexiglas lens protecting the lamp from dirt and debris and can be easily removed and cleaned, reducing the need for removal and
cleaning of the lamp itself. The cart assembly is constructed of aluminum with stainless steel fasteners and has two solid rubber wheels and two
integral handles, allowing this unit to be easily relocated around the work area as needed. The cart and lamp assembly are two pieces and
designed to be easily disassembled without tools, passed through manholes and then reassembled once inside the tank or enclosed area.
Included with this unit is 250 feet of SOOW cord ending in an ECP1523 explosion proof straight blade plug and a lamp fixture assembly that
allows 360 degree rotation and 90 degrees of tilt for easy positioning. This unit can be configured to operate on 120 volts @50/60hz (Americas)
or 230/240 volts for international use.
This explosion proof tank light provides a safe, versatile and convenient lighting alternative to sometimes cumbersome string lights and is ideal
for use in confined spaces such as those found in marine storage tanks, the petrochemical and agricultural industries and anywhere large area
confined workspaces require an effective source of Class 1 Div 1 lighting.
Cross for Chambers Power Products PS400MH-24.
Specifications / Additional Information
RNT-EPL-24C-1X4 Explosion Proof Tank Light
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 23 7/8" Light head- Unit height- 3' Feet
Confined Area Suitable
Weight: 135 Lbs
400 Watt Metal Halide
Total Watts: 400 watts
UL Certified U.S. Standards
Voltage: Configurable 120 volts @50/60hz or 230/240 VAC
75,000 Lumens- 20,000 Sq Ft Coverage
Operating Temp Range: T3B Rated
ECP1523 Class 1 explosion proof plug
Lamp Life Expectancy: 20,000+ Hours (Metal Halide Average)
T3B Temp Rating
Mounting: Non Sparking Aluminum Cart
Wiring: 250 feet 14/3 SOOW Cord- ECP1523 Explosion Proof Plug
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the EPL-24C-1X4;
Monthly...716.00 USD
Weekly...430.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 64
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 65
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- Hi-Res Image 1 - Explosion Proof Tank Light Side
- Hi-Res Image 2 - Explosion Proof Tank Light
- Hi-Res Image 3 - Explosion Proof Tank Light Side
- Hi-Res Image 4 -Explosion Proof Tank Light
- Hi-Res Image 5 - Explosion Proof Tank Light Front
- Hi-Res Image 6 - Explosion Proof Tank Light
- Hi-Res Image 7 - Explosion Proof Tank Light Back
- Hi-Res Image 8 - Explosion Proof Tank Light
- Hi-Res Image 9 - Explosion Proof Tank Light
02/09/2015
Page: 66
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof LED Hand Lamp w/ Exp. Prf. Cord Reel - Class I, Div. I - 50' SOOW Cord - 1050 Lumen
Part #: RNT-EHL-LED-7W-50-HR
Price: $3,146.21
Made in the USA
This Unit Is For Rentals
The Larson Electronics RNT-EHL-LED-7W-50-HR Explosion Proof LED Drop Light / Trouble Light with cord reel is approved for Class 1
Division 1 & 2 Groups C and D, and is ideal for general work activities in hazardous locations requiring explosion proof protection.
This 10 watt explosion proof LED work light from Larson Electronics produces 1050 lumens of bright white light and comes complete with an
explosion proof cord reel with spark proof ratchet mechanism. The RNT-EHL-LED-7W-50-HR fluorescent drop light has no ballast and the
housing is constructed of non sparking aluminum which results in a very lightweight unit. This hazardous location hand lamp is Class 1, Division
1 and 2 and Class 2 Division 1 and 2 hazardous location environment approved.
The non sparking reel contains this unit’s 50' of SOOW Cord for convenient cord management. This explosion proof reel and LED hand lamp can
be installed and used within the hazardous location area, making it ideal for hazardous work areas where a ready source of easily managed
lighting is desired.
100 Watt Incandescent Bulb
Click Photos to Enlarge
With the EXP-LED-7W-100
Click Photos to Enlarge
02/09/2015
Click Photos to Enlarge
Page: 67
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This 10 watt LED drop light is suitable for use in areas where petrochemical vapors and various dusts are present and projects 1050 lumens of
light, which is twice the lumens per watt output of a 100 watt incandescent bulb. This unit is rated Class 1, Division 1 and comes complete with
50’ of SOOW 16/3 AWG cord ending in a 5-15 straight blade plug. The Class 1, Division 1 rated reel contains 50’ of SOOW 16/3 AWG cord, a
spark free ratchet, explosion proof slip-ring housing and meets federal specification JC-580A.
This hand lamp has a high efficiency LED bulb that requires no ballast, so the operator doesn't need to drag the ballast housing around. This can
be particularly annoying when the ballast becomes entangled in the cord. This explosion proof LED hand light operates on standard 120-277
Volts AC Hz for US voltages. The light produced by this unit has a 6000k color temperature, which is much sharper and whiter than the light
produced by incandescent lamps. The light produced by this lamp is ideal for close work and inspection activities where good contrast and true
color representation is needed. The LED lamp in this unit runs much cooler than incandescent or flourescent lamps, resulting in a lamp housing
that remains cool to the touch and eliminates the accidental burns often encountered with incandescent drop lights.
Made in USA Quality
Lamp & Reel Features
1. Federal Spec Cord.
2. Explosion Proof.
3. 10 Watt 1050 Lumen LED Lamp.
4. Rugged fabricated steel and cast aluminum construction.
5. Blue and Gray paint finish.
6. Class 1 Div 1 Class 2 Div 1
7. 120 Volt Operation
8. SOOW cable.
9. Aluminum Hook for Convenient Placement.
10. Explosion Proof Cord Reel
11. Spring activated reel ratchet
12. 4-roller adjustable cable guide
13. Cord Reel - Class I, Division 1 & 2 Group D; Class II, Group G.
10 watt LED light produces 1050 lumens
Non-sparking aluminum housing
50,000 hour LED Lamp
Molded rubber bumper guard
Annealed glass tube shields prevent shattering
Integrated lamp shock absorbers prevent drop damage
Swivel hook for hanging and hands free operation
Explosion proof cord
Built to NEC Standards
Indoor or outdoor use
Gray epoxy finish on steel parts
14. Cord Reel - Class I, Zone 1, AEx d IIB.
02/09/2015
Page: 68
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EHL-LED-7W-50-HR
F.M. Ratings
FM Listing: United States
Class 1, Division 1 & 2 Groups C, D
Dimensions:L-16.5 " Dia-5"
Class II, Division 1 and 2 Groups E, F, G
Lumens: 1050
NEC Standards
Total Watts:10 watts
NEMA 9 and NEMA 4 (IP56) standards
Voltage: 120-277VAC
Color Temp: 6000k
Class I, Zone 1, AEx d IIB.
Mounting: Aluminum Hook
Wiring: 50' SOOW Cord on Explosion Proof Reel
Lamp Type: LED
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
YOU CAN RENT THIS UNIT. CONTACT 1-800-369-6671.
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-EHL-LED-7W-50-HR;
Monthly...579.00 USD
Weekly...347.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase- Same Day Shipping on This Light!
02/09/2015
Page: 69
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
02/09/2015
Page: 70
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof 26W Fluorescent Handlamp w/ Exp. Prf. Reel - Class I, Div. I - RENTAL - 50' Cord
Part #: RNT-EPL-FL26-50-HR
Price: $3,085.35
Made in the USA
The Larson Electronics RNT-EPL-FL26-50-HR Hazardous Area Fluorescent Work light is U.L. approved Class 1 Division1 Groups C
and D - UL 508 listed and is ideal for close quarter work and inspection activities in hazardous locations requiring explosion proof
protection.
This unit is for Rentals
This 26 watt explosion proof fluorescent work light from Larson Electronics produces 1,740 lumens of fluorescent illumination and comes
complete with 50 feet of explosion proof cord. The EPL-FL26-50 fluorescent drop light ballast is contained within the handle while the housing is
constructed of non sparking aluminum with molded bumper guards, an annealed glass tube shield and integral lamp shock absorbers. An inline
ballst is also available. This hazardous location hand lamp is designed to Article 500 of the National Electrical Code and is Class 1, Division 1
and Class 2 Division 1 hazardous location environment approved. This explosion proof fluorescent hand lamp can be installed and used within
the hazardous location area making it ideal for hazardous work areas where a ready source of easily managed lighting is desired.
02/09/2015
Page: 71
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
40' Container Dark
Click Photos to Enlarge
Illuminated by EPL-FL26-50-HR
Click Photos to Enlarge
This 26 watt fluorescent light is suitable for use in areas where petrochemical vapors and various dusts are present and projects 1,740 lumens of
light, roughly equivalent to a 100 watt incandescent bulb as estimated by Sylvania. Fluorescent lights are popular in paint prep, painting and postpaint inspection operations due to the even white color light produced. Incandescent lights tend to create yellowish, shadowy light that confuses
the eye and makes it difficult to examine a work area with consistency. The light output, color and evenness of coverage make fluorescent lights
popular for a wide variety of close quarter work and inspection activities. This unit is rated Class 1, Division 1 and is complete with 50’ of SOOW
16/3 AWG cord ending in a 5-15 straight blade plug that meets federal specification JC-580A.
This hand lamp has the ballast inside the handle so the operator doesn't need to drag the ballast housing around. This can be particularly
annoying when the transformer becomes entangled in the cord. The ballast is lightweight and encapsulated in the handle so that operator can
easily move to different positions without having to stop and adjust an inline ballast unit. The feedback on this feature has been very positive.
This explosion proof fluorescent hand light comes standard with 120 Volts, 60 Hz for US voltages but is also available in 120 Volts, 50 Hz
(Mexico) and 220 volts, 50 Hz for international usage.
Made in USA Quality
Lamp Features
1. Federal Spec JC-580A Cord.
2. Indoor or outdoor use.
3. 35 amp, 1-4 conductors 600 Volt, 5-12 conductors 250 Volt.
4. Rugged fabricated steel and cast aluminum construction.
5. Gray epoxy finish on steel parts.
26 watt fluorescent light produces 1740 lumens
Non-sparking aluminum housing
Ballast contained in handle (inline also available)
Molded rubber bumper guards
6. UL Listed 508 table 36.1 (3 and 4 conductor units with cable only)
7. Conforms to NEMA 9 and NEMA 4 (IP56) standards
Annealed glass tube shields prevent shattering
Integrated lamp shock absorbers prevent drop damage to bulbs
8. SOOW cable.
9. 4-roller adjustable cable guide and Ball Stop
Swivel hook for hanging and hands free operation
Explosion proof cord
10. UL Approval (Cord Reel) - Class I, Division 1 & 2 Group D; Class II,
Group G.
11. UL Approval (Cord Reel) - Class I, Zone 1, AEx d IIB.
02/09/2015
Page: 72
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-FL26-50-HR Work Light
U.L. Ratings
UL Listing: United States
Class 1, Division 1 for Groups C, D
Dimensions: L-14.5 " Dia-3.5"
Class II, Division 1 Groups E, F, G
Lux: At Lens: 15,000
Class III, Division 1
Total Watts: 26 watts
NEMA 4
Voltage: Stnd-120V-60hz Optional-120 Volts, 50 Hz and 220 volts, 50
UL Listed JC-580A Cord
Hz
Total Lumens: 1,740
Reel - UL Listed E193373
Mounting: None
Reel - Class I, Zone 1, AEx d II
Wiring: 50' SOOW Cord
U.L Approval: U.S Certificate
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the EPL-FL26-50-HR;
Monthly...$620.00 USD
Weekly...$372.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
This fixture is being remanufactured with cord reel under file number E193373.
Scroll Down to Purchase- Same Day Shipping on This Light!
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
02/09/2015
Page: 73
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Aluminum Fluorescent Drop Light w/ Exp. Prf. Reel - Class I, Div. I - RENTAL
Part #: RNT-EPL-FL1524-50-HR
Price: $3,002.34
Made in the USA
The Larson Electronics RNT-EPL-FL1524-50-HR Hazardous Area Fluorescent Work light is U.L. approved Class 1 Division1 Groups C
and D - UL 508 listed. With a 2 foot long lamp, this hazardous location light provides a very wide flood beam, which can be suitable for
paint spray booth inspection or general portable lighting in confined spaces like fuel tanks or grain storage areas.
This Unit is for Rentals
This 2 foot long 15 watt explosion proof fluorescent work light from Larson Electronics comes complete with an explosion proof cord reel with
spark proof ratchet mechanism. This hazardous location area light features a rugged, non-sparking aluminum casing and unique rod cage and
produces cool, glare-free, shadowless light that maximizes safety in hazardous locations and maximizes lighting efficiency with built-in metal
reflectors. Fluorescent lights are popular in paint prep, painting and post-paint inspection operations, due to the even white color light produced.
The light output, color and evenness of coverage make fluorescent lights also popular for a wide variety of close quarter work and inspection
activities.
02/09/2015
Page: 74
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
40' Container Dark
Click Photos to Enlarge
With EPL-FL1524-50-HR
Click Photos to Enlarge
Click Photos to Enlarge
Click Photos to Enlarge
The 15-watt fluorescent used in this unit provides as much illumination as higher-wattage incandescent lamps without the associated heat,
reducing the chances of accidents or burns. This lamp has an inline isolated ballast which reduces lamp head weight, an impact resistant tube
shield with specially designed annealed glass and an aluminum hook for easy overhead mounting. The light is designed so that the operator can
easily replace the lamp or starter if required. The Class 1, Division 1 rated reel contains 50’ of SOOW 16/3 AWG cord, a spark free ratchet and
explosion proof slip-ring housing and meets federal specification JC-580A. This explosion proof reel and fluorescent hand lamp can be installed
and used within the hazardous location area making it ideal for hazardous work areas where a ready source of easily managed lighting is
desired.
Made in USA Quality
Lamp Features
1. Federal Spec JC-580A Cord.
2. Indoor or outdoor use.
3. 35 amp, 1-4 conductors 600 Volt, 5-12 conductors 250 Volt.
4. Rugged fabricated steel and cast aluminum construction.
5. Gray epoxy finish on steel parts.
2 foot 15 watt fluorescent light
Non-sparking aluminum housing
Inline Ballast
Molded rubber bumper guards
6. UL Listed 508 table 36.1 (3 and 4 conductor units with cable only)
7. Conforms to NEMA 9 and NEMA 4 (IP56)
Annealed glass tube shields prevent shattering
Integrated lamp shock absorbers prevent drop damage to bulbs
8. SOOW cable.
9. 4-roller adjustable cable guide and Ball Stop
Swivel hook for hanging and hands free operation
Explosion proof cord
10. UL Approval (Cord Reel) - Class I, Division 1 & 2 Group D; Class
II, Group G.
11. UL Approval (Cord Reel) - Class I, Zone 1, AEx d IIB.
02/09/2015
Page: 75
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-FL1524-50-HR Work Light
U.L. Ratings
UL Listing: United States
Class 1, Division 1 for Groups C, D
Dimensions: L-27 " Dia-3.25"
Class II, Division 1 Groups E, F, G
Weight: 14.5 lbs
Class III, Division 1
Total Watts: 15 watts
NEMA 9 and NEMA 4 (IP56)
Voltage: Stnd-120V-60hz
UL Listed JC-580A Cord
Lemp Lengths: 2 Foot
Reel - UL Listed E193373
Mounting: Non Sparking Aluminum Reel
Reel - Class I, Zone 1, AEx d II
Wiring: 50' SOOW Cord
U.L Approval: U.S Certificate
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the EPL-FL1524-50-HR;
Monthly...$589.30 USD
Weekly...$354.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
This fixture is being remanufactured with cord reel under file number E193373.
Scroll Down to Purchase-
02/09/2015
Page: 76
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
02/09/2015
Page: 77
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof Light - Base Stand Mount - 150 Watt LED - 300' - Class 1 Div 1 C&D *RENTAL*
Part #: RNT-EPL-16BS-1X150LED-300
Price: $2,877.56
02/09/2015
Page: 78
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
This Unit is available for Rentals.
The RNT-EPL-16BS-1X150LED-300 Explosion Proof LED Light rental from Larson Electronics is rated Class 1 Division 1-2 Groups C &
D and Class 2 Division 1-2 and uses a 16 inch LED light head to produce 12,000 lumens of light while drawing only 150 watts.
The RNT-EPL-16BS-1X150LED-300 explosion proof LED light provides 9,500 square feet of work area coverage with 12,000 lumens of light
output. This portable LED light is mounted to a four leg aluminum base and has an LED light head measuring 16 inches in diameter. The LED
light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where
flamable vapors, gases and dusts may be present.
Click Image to Enlarge
Click Image to Enlarge
02/09/2015
Click Image to Enlarge
Page: 79
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This explosion proof LED light fixture is comprised of a 16 inch LED light head mounted atop a base stand fabricated from non sparking
aluminum. The lamp can be easily adjusted up or down 90 degrees and locked into position by simply loosening the two hand screws located on
either side of the light head and retightening them once the desired angle is found. Included with this LED light tripod is 300 feet of SOOW cord
terminating in an 1523 explosion proof straight blade plug.
The explosion proof LED light head in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With
traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains
twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a
driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating
LED will continue to operate.
This unit is also multi-voltage capable and can configured to operate on 120-277 volts 50/60 Hz. Further adding to the versatility and
convenience of this explosion proof LED light are 25 peel off mylar overspray lamp protectors that ship with the unit. The protectors provide lamp
protection from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This
lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or
fluorescent lamps.
Made in USA Quality
Superior LED Benefits
1. Approved Class 1 Div1-2 Class2 Div I-2
2. Led lamp head requires no lamping.
3. Durable Base Mount constructed of copper free aluminum.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs.
6. Adjustable LED light head.
7. 25 peel off mylar overspray lamp protectors ship with the unit.
8. 12,000 Lumens produced from only 150 watts.
9. Mercury free shock proof LED lamp light head.
02/09/2015
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
9. Vibration/impact resistant.
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
Page: 80
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-16BS-1X150LED-300 Explosion Proof LED Light
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 16' Light head
Class 1 Division 2, Group A,B,C,D
Weight: 30 Lbs
Class II, Division 1 - 2, Groups E,F,G
Total Watts: 150 watts
UL Certified U.S. Standards
Voltage: Universal Voltage 120-277V AC 50/60Hz
ECP1523 Class 1 explosion proof plug
LED Lamp Lumens: 12,000
DLC Approved
LED Lamp Life Expectancy: 60,000 Hours
Mounting: Aluminum Base Stand
Wiring: 300 feet SOOW Cord Explosion Proof Straight Blade Plug
Operating Temp Range: T5 Rated -40°C to 65°C
Special Orders- Requirements
Color Temp: 6000K
Contact us for special requirements
Beam Lux: 8500@ 1 Meter 1250@ 3 Meters
Toll Free: 1-800-369-6671
LED Lamp Life Expectancy: 60,000 Hours
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EPL-16BS-1X150LED-300;
Monthly...$350.00 USD
Weekly...$234.00 USD
This unit is for rentals. If you would like to purchase this product, we
have new units availble for sale.
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Rent- Click here purchase the EPL-16BS-1X150LED-100.
02/09/2015
Page: 81
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 82
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 83
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Light Tower w/ Wheels - 2 X 400 Metal Halide Lights - Class I, Div. II - RENTAL
Part #: RNT-HAL-2X400MCE
Price: $2,750.00
Made in the USA
The Larson Electronics RNT-HAL-2X400MCE Explosion Proof Portable Light Tower from Larson Electronics is rated Class 1 Division 2,
Groups C & D and uses two 400 watt metal halide lamps to produce 72,000 lumens of light capable of illuminating 50,000 square feet of
work area.
The RNT-HAL-2X400C explosion proof portable light tower is U.L. approved Class 1, Division 2 for Groups C and D and provides 50,000 square
foot of coverage with a 72,000 lumen light output. This unit consists of two 400 watt metal Halide lamps mounted on top of an aluminum cart with
solid rubber wheels, an extendable center tower, and provides a portable and easily deployed source of hazardous location illumination.
02/09/2015
Page: 84
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
The two 400W-MH metal halide fixtures on this unit are weatherproof and suitable for use in outdoor marine applications, making this light cart an
ideal lighting solution for industrial applications, shipyards, commercial maufacturing and outdoor work areas. The lamp housings are
weatherproof and constructed of die cast aluminum featuring a hinged, removable front-access door with two captive closure screws for easy
servicing. The optical assemblies include a precision-formed aluminum reflector and heat/impact-resistant tempered flat door glass. The
aluminum reflector has a chemically bonded, lightweight, non-breakable ALGLAS® finish on both the inside and outside surfaces providing
corrosion resistance, durability and ease of cleaning. The optical assemblies contain a mogul base socket capable of handling the higher pulse
ratings of newer HID systems.
The cart and tower assembly is constructed of aluminum with stainless steel fasteners and has two solid anti-static rubber wheels, allowing this
unit to be easily relocated around the work area as needed. The cart and lamp assembly are two pieces and designed to be easily disassembled
without tools. The lamp fixtures are attached to the mounting bar with adjustable trunnion brackets, allowing the lamps to be adjusted vertically
and horizontally through a full range of positions. Included with this unit is 50 feet of SOOW cord ending in an ECP1523 explosion proof straight
blade plug. The multi-tap ballast in these fixtures enables the lights to be configured from 110V to 277V with jumpers.
This cart mounted work light is suitable for use in areas where flammable petrochemical vapors are sometimes present. The multi-purpose,
portable design of this light tower makes it a popular choice for industrial applications regardless of whether the locations are designated
hazardous or not.
Cross for Chambers Power Products TFEP240MH.
Made in the USA Quality
Metal Halide Benefits
1. High Efficiency Metal Halide lamps.
2. 2- 400 Watt Lamps Producing 72,000 Lumens.
3. Rugged Die Cast Aluminum Lamp Housing.
4. Tempered Glass Lenses.
5. Copper Free Shell, Covers and Sealed Fittings.
6. Vibration/Impact Resistant Construction.
7. Low Maintenance.
8. Adjustable Lamp Brackets.
9. Painted Aluminum Wheeled cart.
10. UL Approved for Marine Environments.
02/09/2015
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering.
5. Vibration and shock resistant.
6. Low maintenance.
Page: 85
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-HAL-2X400MCE
Quick Summary
Total Lumens: 72,000
Class 1 Division 2, Groups C and D
Dimensions Each Lamp Only: 14"-D X 11"-H X 15"-W
UL1598 Outdoor Marine Use
Weight: 110 Lbs
IP65 Construction
Total Watts: 800 watts
UL Certified U.S. Standards
Voltage: 110-277VAC
72,000 Lumens- 50,000 Sq Ft Coverage
Operating Temp Range: T1 Rated
ECP1523 Class 1 explosion proof plug
Lamp Life Expectancy: 20,000+ Hours (Metal Halide Average)
T1 Temperature Rating
Mounting: Non Sparking Wheeled Aluminum Tower
Wiring: 50 feet 14/3 SOOW Cord- ECP1523 Explosion Proof Plug
Lighting Configuration: Flood Pattern
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information
if required.
Rental Prices for the RNT-HAL-2X400MCE;
Monthly...$775.00 USD
Weekly...$517.00 USD
Scroll Down to Purchase-
02/09/2015
Page: 86
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 87
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 - Hi-Res Image 8 -
02/09/2015
Page: 88
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 9 - Hi-Res Image 10 -
02/09/2015
Page: 89
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Class I, Div. I Explosion Proof Tank Light on Wheeled Tripod - 400 Watt Metal Halide - RENTAL
Part #: RNT-EPL-24QP-1X4-250
Price: $2,718.02
02/09/2015
Page: 90
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
The RNT-EPL-24QP-1X4-250 Explosion Proof Tank Light from Larson Electronics is rated Class 1 Division 1 Groups C & D and uses a
400 watt Metal Halide light head to produce 36,000 lumens of light capable of illuminating an area 20,000 square feet in size.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS*
This Unit is for Rentals
The RNT-EPL-24QP-1X4-250 is a tripod mounted explosion proof tank light and provides 20,000+ square feet of work area coverage with 36,000
lumens of light output. This portable tripod light has a removable light head measuring 23 7/8 inches in diameter so it can fit into 24 inch man
ways for cleaning vessels in the petrochemical industry or cleaning out fuel cells in the marine industry. The metal halide lamp on this unit
produces a wide flood pattern of light capable of reaching 200 feet in length that is ideal for illuminating enclosed areas such as tanks and
containers and is suitable for hazardous locations where flammable vapors and gases may be present.
Click to Enlarge
Click to Enlarge
02/09/2015
Page: 91
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This portable light tripod is comprised of a removable metal halide light head mounted atop a solid rubber wheeled cart fabricated from non
sparking aluminum. The non sparking, adjustable and collapsible tripod can be extended to eight feet and collapsed to three feet while wheels on
two of the tripod feet enable the operator to tilt the unit back and simply roll the entire assembly to a new location. The explosion proof light head
can be removed by releasing the hand knob and sliding the light and mounting bracket off of the tripod support while the legs can be collapsed,
aiding in deployment, storage and transport. The lamp can be easily adjusted up, down and locked into position. Included with this tank light is
250 feet of SOOW cord which combined with the ease of mobility and 90 degrees of tilt offered by the metal halide light head provides an
effective alternative to often cumbersome explosion proof string lights.
The light head on this unit measures 23 7/8 inches in diameter, which allows it to fit through most standard 24 inch manholes and entry points.
The light head can be removed from the tripod, the tripod collapsed, and the entire assembly passed through a manhole and reassembled once
inside.
This unit can be operated on 120-240 volts 50/60 Hz. This lamp is T3 A temperature rated and includes 250 feet of 14/3 SOOW cord (chemical
and abrasive resistant) terminated with a ECP1523 Class 1 explosion proof straight blade plug.
Cross for Chambers Power Products TL400MHMH-120V.
Made in the USA Quality
Metal Halide Benefits
1. High Efficiency Metal Halide lamp.
2. 400 Watt Lamp Produces 36,000 lumens.
3. Rugged Die Cast Aluminum Lamp Housing.
4. Tempered and heat resistant glass bulb dome .
5. Cast aluminum dome guard.
6. Vibration/Impact Resistant Construction.
7. Low Maintenance.
8. Adjustable from 3 to 8 Foot Height.
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering.
5. Vibration and shock resistant.
6. Low maintenance.
9. Painted aluminum tripod.
10. UL Approved for Marine Environments.
02/09/2015
Page: 92
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-24QP-1X4-250Explosion Proof Tripod
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 23 7/8" Light Head - 3' to 8' Extendible Tripod
Class 1 Division 2,
Weight: 115 lbs.
ECP1523 Class 1 explosion proof plug
Total Watts: 400 watts
UL Certified U.S. Standards
Voltage: 120V - 240V
Lamp Lumens: 36,000
Lamp Life Expectancy: 20,000 Hours
Mounting: Non Sparking Wheeled Aluminum Tripod
Wiring: 200 feet SOOW Cord - Explosion Proof Straight Blade Plug
Operating Temp Range: T3 A Rated
Special Orders- Requirements
Beam Lux: 8500@ 1 Meter 1250@ 3 Meters
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information
if required.
Rental Prices for the RNT-EPL-24C-1X4;
Monthly...$425.00 USD
Weekly...$257.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 93
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 94
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 95
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Electric Explosion Proof Box Fan Blower Cart - 3200 CFM - Locking Casters - 25' Cord *RENTA
Part #: RNT-EPFC-E16-3200-25-1523-ND
Price: $2,717.65
02/09/2015
Page: 96
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
This unit is for rentals
The Larson Electronics RNT-EPFC-E16-3200-25-1523-ND Explosion Proof Box Fan / Blower Cart safely and effectively redirects stale
air from hazardous location areas. This explosion proof blower meets UL standards for hazardous locations and provides high 3200
CFM output for effective airflow in larger spaces.
This portable, electric explosion proof blower (exhaust fan) is suitable for confined spaces and is approved to UL safety standards for hazardous
locations, including Class 1 Division 1 Group D and Class 2 Division 1 Groups E, F and G. This blower features a high efficiency 1/2 hp motor
which is fully encapsulated and a precision balanced, non sparking aluminum 21-blade system for high output and protection against accidental
ignitions. This fan has 16 inch intake and exhaust flanges and produces 3200 CFM of air output.
This explosion proof blower is encapsulated in a high strength, anti-static glass reinforced, corrosion proof and chemical resistant ABS housing.
The complete blower systems is mounted to a non-sparking aluminum frame with locking casters to provide ease in mobility and transportation.
This box blower/fan operates on standard 115 VAC with an 21 amp in-rush draw and 6 amp constant draw. Included with this unit is 25 feet of
cord fitted with a 15 amp, 5-15 explosion proof plug.
Note on explosion proof blowers: Can be used as an intake and an exhaust fan.
Click Photo to Enlarge
Features
• .5 HP electric motor, 115 VAC - 21 amps start and 6 amps constant
• 90.2 dB noise level
• 16 inch intake and exhaust flange (duct and couplers sold separately)
• 3200 CFM free air delivery
• Approved for Class I Group D and Class II Groups E, F, G
• Aluminum non-sparking blower blade is precision balanced
• IP65 rain switch enclosure
• High strength, anti-static glass reinforced ABS housing is lightweight, corrosion proof and chemical resistant
• Wheeled aluminum base with locking casters
• Reversible duct adapter
• Pre-Wired With 25 foot cord and a 15 amp explosion proof twist-lock plug
02/09/2015
Page: 97
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPFC-E16-3200-25-1523-ND Explosion Proof Fan/Blower
UL Approvals
Dimensions: 19”W x 24”H x 12”D - 65 pounds
Class 1 Group D
Weight: 68 lbs
Class II Groups E, F and G
Noise Level : 90.2 Db
T6 Temp Rating
Motor: .5 Horsepower
Locking Casters
Voltage: 115 VAC
Amps: 21 @ Startup, 6 Constant
Fan Type: Box Fan/Blower
CFM Delivery : 3200
Special Orders- Requirements
Wiring: 25 Foot Cord, 15 amp, 5-15 explosion proof plug
Contact us for special requirements
Ambient Operating Temp: -20°F to +180°F
Toll Free: 1-800-369-6671
Click here to see the airflow curve chart for this fan.
Intl: 1-903-498-3364
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental prices for the RNT-RNT-EPFC-E16-3200-25-1523-ND;
Monthly...$367.25 USD
Weekly...$244.83 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 98
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 99
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 -
02/09/2015
Page: 100
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof Light - Base Stand Mount - 24 Inch 400 Watt Metal Halide - 250ft Cord
Part #: RNT-EPL-24BS-1X4-250
Price: $2,688.02
Made in the USA
This unit is for rentals
The RNT-EPL-24BS-1X4-250 Explosion Proof Portable Base Stand Tank Light from Larson Electronics is rated Class 1 Division 1
Groups C & D and uses a 400 watt Metal Halide light head to produce 36,000 lumens of light capable of illuminating an area 20,000
square feet in size.
The RNT-EPL-24BS-1X4-250 is an aluminum base stand mounted explosion proof tank light and provides 20,000+ square feet of work area
coverage with 36,000 lumens of light output. This portable tank light has a removable light head measuring 23 7/8 inches in diameter so it can fit
into 24 inch man ways for cleaning vessels in the petrochemical industry or cleaning out fuel cells in the marine industry. The metal halide lamp
on this unit produces a wide flood pattern of light capable of reaching 200 feet in length that is ideal for illuminating enclosed areas such as tanks
and containers and is suitable for hazardous locations where flammable vapors and gases may be present.
02/09/2015
Page: 101
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Click Photo to Enlarge
Page: 102
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This portable tank light is comprised of a removable metal halide light head mounted within a base stand fabricated from non sparking aluminum.
The non sparking and adjustable base stand of this 400 watt metal halide fixture enables the operator to simply pick up the entire assembly and
move it to a new location. The lamp can be easily adjusted up, down and locked into position. Included with this tank light is 250 feet of SOOW
cord which combined with the ease of mobility and 90 degrees of tilt offered by the metal halide light head provides an effective alternative to
often cumbersome explosion proof string lights.
The light head on this unit measures 23 7/8 inches in diameter, which allows it to fit through most standard 24 inch manholes and entry points.
The light head can be removed from the aluminum base stand and the entire assembly passed through a manhole and reassembled once inside.
This unit can be operated on 120-240 volts 50/60 Hz. This lamp is T3 A temperature rated and includes 100 feet of 14/3 SOOW cord (chemical
and abrasive resistant) terminated with a ECP1523 Class 1 explosion proof straight blade plug.
Made in the USA Quality
Metal Halide Benefits
1. High Efficiency Metal Halide lamp.
2. 400 Watt Lamp Produces 36,000 lumens.
3. Rugged Die Cast Aluminum Lamp Housing.
4. Tempered and heat resistant glass bulb dome .
5. Cast aluminum dome guard.
6. Vibration/Impact Resistant Construction.
7. Low Maintenance.
8. UL Approved for Marine Environments.
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering.
5. Vibration and shock resistant.
6. Low maintenance.
02/09/2015
Page: 103
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-24BS-1X4-250 Explosion Proof Base Stand Fixture
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 23 7/8" Light Head
Class 1 Division 2,
Weight: 75 Lbs
ECP1523 Class 1 plug
Total Watts: 400 watts
UL Certified U.S. Standards
Voltage: 120V - 240V
Lamp Lumens: 36,000
Lamp Life Expectancy: 20,000 Hours
Mounting: Non Sparking Aluminum Base
Wiring: 250 feet SOOW Cord - Explosion Proof Straight Blade Plug
Special Orders- Requirements
Operating Temp Range: T3 A Rated
Contact us for special requirements
Beam Lux: 8500@ 1 Meter 1250@ 3 Meters
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
YOU CAN RENT THIS UNIT. Contact 1-800-369-6671 to make
arrangements.
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EPL-24BS-1X4-250;
Monthly...$375.00 USD
Weekly...$281.25 USD
E-mail: [email protected]
This unit is for rentals. If you would like to purchase this product, we
have new units availble for sale.
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 104
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 105
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 106
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Class I & II, Division I Explosion Proof LED Light - 10,000 Lumen - Adjustable J-Bracket - RENTAL
Part #: RNT-EPL-JH16C-1MLED-100
Price: $2,679.00
Made in the USA
This is a rental unit.
The EPL-JH16C-1MLED-100 Explosion Proof LED Light from Larson Electronics is rated Class 1 Division 1-2 Groups C & D and Class 2
Division 1-2 and uses LEDs to produce 10,000 lumens of light while drawing only 150 watts. This hazardous area LED light comes
attached to an aluminum rail/ladder mount bracket that allows operators to easily mount this unit to ladders, handrails, catwalks and
other similar structures.
The EPL-JH16C-1MLED-100 explosion proof LED light provides 8,000 square feet of work area coverage with 10,000 lumens of light output.
This portable LED light has an angle adjustable light head measuring 16 inches in diameter and an aluminum rail/ladder bracket that can be
adjusted from 26 inches to 43 inches to allow mounting to a wide variety of railings, scaffoldings or ladders. This explosion proof LED light has a
light head measuring only 16" in diameter, which allows it to fit through most standard sized manholes and entryways and produces a brilliant
flood pattern of light that is ideal for illuminating large enclosed areas, further adding to this unit's desirability as a portable hazardous area
lighting solution.
02/09/2015
Page: 107
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
This portable LED light is comprised of a 16 inch LED light head mounted to an aluminum bracket with an adjustable J shaped bottom hook that
enables operators to securely mount the light to any ladder or scaffolding. Lamp adjustment is via an adjustable yolk that allows the operator to
position the lamp angle through a full 90 degrees of vertical adjustment. All hardware on this unit is non sparking/corrosion resistant and
the power cord is resistant to damage from chemicals and abrasion. Included with this LED light cart is 100 feet of SOOW cord terminating in an
explosion proof plug, which combined with the 90 degrees of tilt offered by the LED light head provides an effective alternative to often
cumbersome explosion proof string lights.
This unit is also multi-voltage capable and can be can be operated with 120-277 VAC, 50/60Hz. Further adding to the versatility and convenience
this LED light are 25 peel off mylar overspray lamp protectors that ship with the unit. The protectors provide lamp protection from dirt or debris
and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This lamp is T5 temperature rated
and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps.
Made in USA Quality
Superior LED Benefits
1. Approved Class 1 Div1-2 Class II Div I-2.
2. Fixture arrives assembled and lamped to reduce installation time and
cost.
3. J-Bracket constructed of non sparking aluminum.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs.
6. Light weight and High Output.
7. 25 peel off mylar overspray lamp protectors ship with the unit.
8. 10,000 Lumens from only 150 watts.
9. Mercury free shock proof LED lamp light head.
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
9. Vibration/impact resistant.
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
02/09/2015
Page: 108
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
EPL-JH16C-1MLED-100 Explosion Proof Tank Light
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 16' Light head
Class 1 Division 2, Group A,B,C,D
Weight: 55 Lbs
Class II, Division 1 - 2, Groups E,F,G
Total Watts: 150 watts
cETL Certified to UL844 and C22.2 Standards
Voltage: Configurable 120V-60hz 220V-50hz 240V-60hz 277V-60hz ECP1523 Class 1 explosion proof plug
Operating Temp Range: T5 Rated 40C to 65C
LED Lamp Life Expectancy: 60,000 Hours
Mounting: Aluminum Ladder/Rail J-Bracket
Wiring: 100 feet SOOW Cord Explosion Proof Straight Blade Plug
Special Orders- Requirements
Contact us for special requirements
Phone: 1-214-616-6180
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental prices for the RNT-EPL-JH16C-1MLED-100;
Monthly...$695.00 USD
Weekly...$465.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 109
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 110
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 -
02/09/2015
Page: 111
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof Light - Base Stand Mount - 16 Inch - 150 Watt LED - Class 1 Div 1 C&D *RENT
Part #: RNT-EPL-16BS-1X150LED-100
Price: $2,677.56
02/09/2015
Page: 112
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
This Unit is available for Rentals.
The RNT-EPL-16BS-1X150LED-100 Explosion Proof LED Light rental from Larson Electronics is rated Class 1 Division 1-2 Groups C &
D and Class 2 Division 1-2 and uses a 16 inch LED light head to produce 12,000 lumens of light while drawing only 150 watts.
The RNT-EPL-16BS-1X150LED-100 explosion proof LED light provides 9,500 square feet of work area coverage with 12,000 lumens of light
output. This portable LED light is mounted to a four leg aluminum base and has an LED light head measuring 16 inches in diameter. The LED
light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where
flamable vapors, gases and dusts may be present.
Click Image to Enlarge
Click Image to Enlarge
02/09/2015
Click Image to Enlarge
Page: 113
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This explosion proof LED light fixture is comprised of a 16 inch LED light head mounted atop a base stand fabricated from non sparking
aluminum. The lamp can be easily adjusted up or down 90 degrees and locked into position by simply loosening the two hand screws located on
either side of the light head and retightening them once the desired angle is found. Included with this LED light tripod is 100 feet of SOOW cord
terminating in an 1523 explosion proof straight blade plug.
The explosion proof LED light head in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With
traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains
twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a
driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating
LED will continue to operate.
This unit is also multi-voltage capable and can configured to operate on 120-277 volts 50/60 Hz. Further adding to the versatility and
convenience of this explosion proof LED light are 25 peel off mylar overspray lamp protectors that ship with the unit. The protectors provide lamp
protection from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This
lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or
fluorescent lamps.
Made in USA Quality
Superior LED Benefits
1. Approved Class 1 Div1-2 Class2 Div I-2
2. Led lamp head requires no lamping.
3. Durable Base Mount constructed of copper free aluminum.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs.
6. Adjustable LED light head.
7. 25 peel off mylar overspray lamp protectors ship with the unit.
8. 12,000 Lumens produced from only 150 watts.
9. Mercury free shock proof LED lamp light head.
02/09/2015
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
9. Vibration/impact resistant.
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
Page: 114
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-16BS-1X150LED-100 Explosion Proof LED Light
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 16' Light head
Class 1 Division 2, Group A,B,C,D
Weight: 30 Lbs
Class II, Division 1 - 2, Groups E,F,G
Total Watts: 150 watts
UL Certified U.S. Standards
Voltage: Universal Voltage 120-277V AC 50/60Hz
ECP1523 Class 1 explosion proof plug
LED Lamp Lumens: 12,000
DLC Approved
LED Lamp Life Expectancy: 60,000 Hours
Mounting: Aluminum Base Stand
Wiring: 100 feet SOOW Cord Explosion Proof Straight Blade Plug
Operating Temp Range: T5 Rated -40°C to 65°C
Special Orders- Requirements
Color Temp: 6000K
Contact us for special requirements
Beam Lux: 8500@ 1 Meter 1250@ 3 Meters
Toll Free: 1-800-369-6671
LED Lamp Life Expectancy: 60,000 Hours
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EPL-16BS-1X150LED-100;
Monthly...$300.00 USD
Weekly...$167.00 USD
This unit is for rentals. If you would like to purchase this product, we
have new units availble for sale.
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Rent- Click here purchase the EPL-16BS-1X150LED-100.
02/09/2015
Page: 115
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 116
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1
- Hi-Res Image 2
- Hi-Res Image 3
- Hi-Res Image 4
02/09/2015
Page: 117
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* 150 Watt Explosion Proof LED Light Tower - Quadpod Mount - C1D1 - 100 foot Cord w/ EXP Plug
Part #: RNT-EPL-QP-1X150RT-100
Price: $2,584.59
02/09/2015
Page: 118
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
The RNT-EPL-QP-1X150RT-100 Quadpod Mounted Explosion Proof LED Light Tower from Larson Electronics produces 12,000 lumens
of light capable of illuminating an area 8,500 square feet in size. This adjustable LED light tower is designed for portability and durable
operation and ideal for use in demanding conditions.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS*
The RNT-EPL-QP-1X150RT-100 is a quadpod mounted explosion proof LED lighting system and provides 8,500 square feet of work area
coverage with 12,000 lumens of light output. This portable LED light tower has a removable LED light head mounted on top of a four leg durable
non-sparking aluminum quadpod equipped with wheels for easy positioning of the unit from one area of the workspace to another. The LED light
head on this unit produces a wide flood pattern of light that is ideal for illuminating large workspaces and jobsites. This light is designed for heavy
duty use in demanding conditions including emergency services, mining, construction, marine, and industrial operations where durability and
reliability is critical.
This portable LED light is comprised of an adjustable LED light head mounted atop a four leg quadpod fabricated from non-sparking powder
coated aluminum. This adjustable and collapsible quadpod can be extended to twelve feet, collapsed to seven feet, and includes solid wheels
allow the operator to tilt the unit back and simply roll the entire assembly to a new location when fully deployed. The LED light fixture assembly
can be removed by releasing the hand knob and sliding the light and mounting bracket off of the center support while the legs can be collapsed,
aiding in deployment, storage and transport. The lamp can be easily adjusted vertically and locked into position.
02/09/2015
Page: 119
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photos to Enlarge
Included with this hazardous location LED light tower is 100 feet of SOOW cord which combined with adjustability offered by the LED light head
provides ample length for tower placement and optimal coverage of the workspace. The easy to collapse design of this Class 1 Division 1 LED
work light allows Larson Electronics to avoid pallet freight charges when shipping and deliver these units via UPS next day air service, which in
turn improves delivery time and reduces the cost to buyers.
The LED light head on this tower contains twelve 12.5 watt LEDs producing 1000 lumens each. These LEDs are arranged in rows and paired
with high purity optics to produce 12,000 lumens and a 60 degree flood beam while only drawing 1.25 amps on 120V, making these units ideal
for use as highly efficient yet powerful work and area lights. The EPL-QP-1X150RT-100 hazardous location LED light is an ideal replacement for
fragile and hot running 400 watt metal halide floodlights.
The LED light head on this unit is small enough to allow it to fit through most standard size manholes and entry points. The LED light head can
also be removed from the quadpod, the tower collapsed and the entire assembly passed through a manhole and reassembled once inside. This
unit is multi-voltage capable and configured to operate on 120-277 volts 50/60 Hz. This LED light head retains 80% of its lumen output after
50,000 hours of use, far longer than incandescent or fluorescent lamps.
Made in USA Quality
Superior LED Benefits
1. Approved Class 1 Div1-2 Class 2 Div I-2
2. Led lamp head requires no lamping and simply slides on
the quadpod and is locked into place with a hand tightened set screw.
3. Quadpod constructed of corrosion resistant, non-sparking aluminum
with powder coated finish.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs.
6. Solid rubber tires. No flats or tube replacements.
7. 25 peel off mylar overspray lamp protectors ship with the unit.
8. 12,000 Lumens produced from only 150 watts.
9. Mercury free shock proof LED lamp light head.
02/09/2015
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
9. Vibration/impact resistant.
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
Page: 120
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
EPL-QP-1X150RT-100 Explosion Proof LED Quadpod
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 14"-W 16"-H 5"-D- Light Head - 7' to 12' Extendible
Tower
Class 1 Division 2, Group A,B,C,D
Weight: 50 lbs.
Class II, Division 1 - 2, Groups E,F,G
Total Watts: 150 watts
UL Certified U.S. Standards
Voltage: 120-277 VAC 50/60Hz
ECP1523 Class 1 explosion proof plug
Lighting Configuration: 60° Flood Pattern
Wheeled Adjustable Tower 7 - 12 Feet
100 Foot Cord
LED Lamp Life Expectancy: 50,000 Hours
DLC Approved
Mounting: Non-Sparking Wheeled Aluminum Quadpod
Wiring: 100 feet SOOW Cord w/ EPP-15A Explosion Proof Plug
Special Orders- Requirements
Total Lumens: 12,000
Contact us for special requirements
Color Temp: 6000K
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental prices for the RNT-EPL-JH-150W-150-120V;
Monthly...425.00 USD
Weekly...295.25 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 121
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 122
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 123
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Class I, Div. II Hazardous Area Quadpod Mounted Lights - 2 X 400 Watt Metal Halide - RENTAL
Part #: RNT-HAL-2X400MH
Price: $2,550.00
02/09/2015
Page: 124
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
This Unit is for Rentals
The Larson Electronics RNT-HAL-2X400MH hazardous area light tower carries two metal halide lamps capable of illuminating an area
50,000 square feet in size and is rated Class 1 Division 2 Groups C and D as well as wet area and marine environment suitable.
The RNT-HAL-2X400MH hazardous area light tower provides operators in hazardous locations with a versatile lighting solution for operations
where easily managed large scale illumination of the workspace is required. Two 400 watt metal halide lamps provide light coverage for 50,000
square feet of work area while a Class 1 Division 2 Groups C and D U.L. approval assures reliable protection against inadvertent ignitions. This
light tower can be extended from 5 to 12 feet in height and the aluminum quadpod includes wheels for easy placement of the tower.
A dark warehouse, lit only by a distant 75W incandescent bulb.
Click Photo to Enlarge
Same warehouse illuminated by the HAL-2X400MH
Click Photo to Enlarge
This light tower is constructed of aluminum and provides for both height adjustment and leg placement assuring a steady and stable platform.
Included with this unit are two 400 watt metal halide lamps and 50 feet of abrasive and oil resistant SOOW cord terminating in an ECP 1523 515P Class 1 Division 1 explosion proof straight blade plug. The explosion proof light fixtures can be removed by releasing the hand knob and
sliding the light and mounting bracket off of the quadpod center support while the legs can be collapsed, aiding in deployment, storage and
transport. This tower is rated for use in wet areas and marine environments and operates on 120 VAC.
02/09/2015
Page: 125
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-HAL-2X400MH
U.L Ratings
Lamp Type: 2X Metal Halide
U.L Rated for Wet Area Use
Dimensions: Telescoping- 7' to 13'
Class 1 Division 2 Groups C and D
Total Watts: 800
U.L Approved Marine Environments
Watts Per Lamp: 400
Not Suitable for Confined Spaces
Voltage: 120-277/60, 480, 220/50
Lighting Configuration: Flood Pattern
Mounting: Telescoping Light Tower Wheeled Quadpod Base
Weight: 105lbs
U.L. Listing: Wet Area / Marine Environment Approved
Total Coverage: 50,000 Sq. Feet
Special Orders- Requirements
Wiring: 100 Feet SOOW Abrasive Oil Resistant Cord.
Contact us for special requirements
Beam Lux: 17000@ 1 Meter 2500@ 3 Meters
Phone: 1-214-616-6180
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-HAL-2X400MH;
Monthly...$420.00 USD
Weekly...$251.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 126
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 127
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Electric Box Fan/Blower - 4450 CFM - Class I, Div. I - RENTAL
Part #: RNT-EPF-E16-4450
Price: $2,445.00
Made in the USA
This unit is a Rental
The Larson Electronics RNT-EPF-E16-4450 Explosion Proof Box Fan / Blower with 15 foot static conductive duct safely and effectively
redirects stale air from hazardous location areas. This explosion proof blower meets UL and ATEX standards for hazardous locations
and provides high 4450+ CFM output for effective airflow in larger spaces.
This portable, electric explosion proof blower (exhaust fan) is suitable for confined spaces and is approved to UL and ATEX safety standards for
hazardous locations. This fan features a high efficiency 1.5 hp motor which is fully encapsulated and a precision balanced, non sparking
aluminum blower blade for high output and protection against accidental ignitions. This fan has 16 inch intake and exhaust flanges and produces
over 4,450 CFM of air output for excellent movement of air in large areas.
Other features include a light weight/high strength, anti-static glass reinforced ABS housing that is corrosion proof and chemical resistant with an
IP65 rated and rain tested switch enclosure. This box blower/fan operates on standard 115 VAC with an 18 amp initial draw and 5 amp constant
draw after startup. Included with this unit is 30 feet of cord fitted with a 25 amp, 5-15 explosion proof twist-lock plug.
Note on Explosion Proof Fans: Can be used as an intake and an exhaust fan.
Click Photo to Enlarge
02/09/2015
Page: 128
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Features
• 1.5 HP 1.1 kW electric motor, 115 VAC - 18 amps start and 5 amps run
• 90 dB noise level
• 16 inch intake and exhaust flange
• 4450+ cfm free air delivery (3180 CFM with 90 degree bend with 15' duct)
• Approved for Class I Group D and Class II Groups E, F, G
• Aluminum non-sparking blower blade is precision balanced
• IP65 rain tested switch enclosure
• High strength, anti-static glass reinforced ABS housing is lightweight, corrosion proof and chemical resistant
• Reversible duct adapter
• Pre-Wired With 30 Ft. Cord and a 25 amp explosion proof twist-lock plug
• Standard with a 15 amp explosion proof plug
The included 15 foot long duct is a single-ply polyester reinforced PVC vinyl fabric hose design with an extrernal wearstrip reinforced with a
spring steel wire helix. It is lightweight for blower applications and highly compressible. The retractability of the static conductive duct allows for
convenient storage and easy transport in a fraction of its fully extended length and has low friction loss. The wearstrip offers external abrasion
resistance, and is listed as YL 94 V-0 flame retardant. Ambient operating temperature fro this unit ranges from -20 degrees to 180 degrees
Farenheit.
Specifications / Additional Information
RNT-EPF-E16-4450 Explosion Proof Fan/Blower
UL and ATEX Approvals
Dimensions: 19”W x 18”H x 12”D
Class 1 Group D
Weight: 61 lbs
Class II Groups E, F and G
Noise Level : 90 Db
ATEX II 2 G EX d IIB T6
Motor: 1.5 Horsepower
T6 Temp Rating
Voltage: 1.1Kw 115 VAC
Amps: 18 @ Startup, 5 Constant
Fan Type: Box Fan/Blower
CFM Delivery : 4450+
Special Orders- Requirements
Wiring: 30 Foot Cord, 25 amp, 5-15 Exp Proof Twist-lock Plug
Contact us for special requirements
Ambient Operating Temp: -20 to 180 Degrees Farenheit
Toll Free: 1-800-369-6671
Intl: 1-903-498-3364
Click here to see the airflow curve chart for this fan.
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us Toll Free: at 1-800-369-6671 or (903)
498-3363 for further information if required.
Rental prices for the RNT-EPF-E16-4450;
Monthly...612.00 USD
Weekly...367.20 USD
Scroll Down to Purchase-
Links (Click on the below items to view):
- Dimensional Drawing
- Manual
02/09/2015
Page: 129
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof Light - Base Stand Mount - 24 Inch - 250 Watt Metal Halide - Class 1 Div 1
Part #: RNT-EPL-24BS-1X250-100
Price: $2,438.02
Made in the USA
The EPL-24BS-1X250-100 Explosion Proof Portable Base Stand Tank Light from Larson Electronics is rated Class 1 Division 1
Groups C & D and uses a 250 watt Metal Halide light head to produce 22,500 lumens of light capable of illuminating an area
10,000 square feet in size.
The EPL-24BS-1X250-100 is an aluminum base stand mounted explosion proof tank light and provides 10,000+ square feet of work area
coverage with 22,500 lumens of light output. This portable tank light has a removable light head measuring 23 7/8 inches in diameter so it
can fit into 24 inch man ways for cleaning vessels in the petrochemical industry or cleaning out fuel cells in the marine industry. The metal
halide lamp on this unit produces a wide flood pattern of light capable of reaching 200 feet in length that is ideal for illuminating enclosed
areas such as tanks and containers and is suitable for hazardous locations where flammable vapors and gases may be present.
02/09/2015
Page: 130
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Click Photo to Enlarge
Page: 131
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This portable tank light is comprised of a removable metal halide light head mounted within a base stand fabricated from non sparking
aluminum. The non sparking and adjustable base stand of this 250 watt metal halide fixture enables the operator to simply pick up the
entire assembly and move it to a new location. The lamp can be easily adjusted up, down and locked into position. Included with this tank
light is 100 feet of SOOW cord which combined with the ease of mobility and 90 degrees of tilt offered by the metal halide light head
provides an effective alternative to often cumbersome explosion proof string lights.
The light head on this unit measures 23 7/8 inches in diameter, which allows it to fit through most standard 24 inch manholes and entry
points. The light head can be removed from the aluminum base stand and the entire assembly passed through a manhole and
reassembled once inside.
This unit can be operated on 120-240 volts 50/60 Hz. This lamp is T3 A temperature rated and includes 100 feet of 14/3 SOOW cord
(chemical and abrasive resistant) terminated with a ECP1523 Class 1 explosion proof straight blade plug.
Made in the USA Quality
Metal Halide Benefits
1. High Efficiency Metal Halide lamp.
2. 250 Watt Lamp Produces 22,500 lumens.
3. Rugged Die Cast Aluminum Lamp Housing.
4. Tempered and heat resistant glass bulb dome .
5. Cast aluminum dome guard.
6. Vibration/Impact Resistant Construction.
7. Low Maintenance.
8. UL Approved for Marine Environments.
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering.
5. Vibration and shock resistant.
6. Low maintenance.
Specifications / Additional Information
EPL-24BS-1X250-100 Explosion Proof Base Stand Fixture
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 23 7/8" Light Head
Class 1 Division 2,
Weight: 90 Lbs
ECP1523 Class 1 plug
Total Watts: 250 watts
UL Certified U.S. Standards
Voltage: 120V - 240V
Lamp Lumens: 22,500
Lamp Life Expectancy: 20,000 Hours
Mounting: Non Sparking Aluminum Base
Wiring: 100 feet SOOW Cord - Explosion Proof Straight Blade Plug
Operating Temp Range: T3 A Rated
Special Orders- Requirements
Beam Lux: 8500@ 1 Meter 1250@ 3 Meters
Contact us for special requirements
Toll Free: 1-800-369-6671
YOU CAN RENT THIS UNIT. Contact 1-800-369-6671 to make
arrangements.
Intl: 1-903-498-3363
E-mail: [email protected]
Scroll Down to Purchase-
02/09/2015
Page: 132
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Incandescent Drop Lights - Class I/II, Div. I - 5 Drop lights - RENTAL
Part #: RNT-EPL-SL-5
Price: $2,425.00
Made in the USA
This Unit is for Rentals
The Larson Electronics RNT-EPL-SL-5 Explosion Proof String Light set is U.L. approved Class 1 Division 1 Groups C and D - and is
ideal for general close work and inspection activities in hazardous locations requiring explosion proof protection.
This explosion proof string light set from Larson Electronics contains a total of 5, 26 watt, 60 watt or 100 watt work lights depending upon
configuration, equipped with aluminum hooks and connected in series along 90 feet of 12/3 SOOW explosion proof cord. A fully potted aluminum
junction box is mounted every ten feet, with 3 feet of 16/3 SOOW cord connecting a single drop light to each box. The cord on this unit is
terminated with a 1523P Class 1, Division 1 explosion proof plug for complete protection. With this arrangement, each drop light cannot spark if
pulled apart and the aluminum junction boxes will not spark if dragged. A 40 foot tail section of main SOOW cord is included to allow ample
length for connection to power sources.
This unit incorporates five drop lights connected in series and is suitable for use in areas where petrochemical vapors and various dusts are
present. The aluminum housings with rubber bumper guards, polycarbonate lamp covers and abrasion resistant cord make this a very durable
unit that will resist damage from chemicals, abrasion, vibrations and impacts. This string lighting solution will provide the lighting you require in a
flexible, easy to manage configuration. The hand lamps can be moved around and hooked to different points on your scaffold. The lights,
however must remain within 10 feet of one other.
This string light set is Class 1, Division 1 rated for Groups C and D with the 100 watt bulb option and Class II, Division 1 Groups F and G with a
60 Watt bulb maximum for compliance to the Class 2 rating. This unit qualifies for both Class 1 Division 1 and Class 2 Division 1 with the optional
26 Watt Compact Fluorescent bulb. Choose your lamp wattage and type below when ordering. This unit can also be ordered in 120VAC,
220VAC or 240VAC configuration for operation with these voltages.
Made in USA Quality
Lamp Features
1. Federal Spec Cord.
2. Explosion Proof.
3.8- Total of 10- 100 watt, 60 watt or 26 Watt Lamps.
4. Rugged fabricated steel and cast aluminum construction.
5. Blue and Gray paint finish.
6. UL Class1 Div1 Class 2 Div1
7. 120VAC Operation
8. SOOW cable.
9. Aluminum Hooks for Convenient Placement.
Up to 500 watts of illumination
Non-sparking aluminum housings
Non sparking aluminum junction boxes
Molded rubber bumper guard
polycarbonate shields prevent bulb damage
Integrated lamp shock absorbers prevent drop damage
Swivel hook for hanging and hands free operation
Explosion proof cord
02/09/2015
Page: 133
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-SL-5
U.L. Ratings
UL Listing: United States
Class 1, Division 1 Groups C, D
Dimensions- Each Lamp: L-16.5" Diam-5"
Class 2, Division 2 Groups , F, G
Total Watts: 500, 300 or 130 Depending on Lamp Option
Single Lamp Watt: 26, 60 or 100 watts
Voltage: Stnd-120VAC-60Hz, 220VAC-50Hz, or 240VAC-60Hz
Amps: 3 @120 volts (100 watt bulbs)
Mounting: Aluminum Hooks
Wiring: 90' SOOW Cord- 1523P Plug
Outlet Protection: GFCI Required at Power Source
Total Length: 90'
Special Orders- Requirements
Total Weight:85lbs
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information
if required.
Rental Prices for the EPL-SL-5;
Monthly...$700.00 USD
Weekly...$467.00 USD
Scroll Down to Purchase- Same Day Shipping on This Light!
Links (Click on the below items to view):
- Dimensional Drawing
02/09/2015
Page: 134
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Metal Halide Light - 70 Watt - Tripod Mount - 100' Cord - Hazlo Plug RENTAL
Part #: RNT-EPL-BS-70-TP1-100
Price: $2,418.75
02/09/2015
Page: 135
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
**THIS UNIT IS FOR RENTALS**
The Larson Electronics RNT-EPL-BS-70-TP1-100 Tripod Mounted Explosion Proof Metal Halide Light is U.L. approved Class 1 & 2,
Division 1 & 2 and is rated for use in wet and marine environments. The adjustable tripod mount and metal halide lamp used with this
unit provides operators with excellent power and efficiency coupled with high versatility and ease of use.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS*
This explosion proof metal halide light is mounted on our non-sparking aluminum collapsible tripod, giving operators an easily deployable source
of powerful light that can be quickly setup and adjusted to effectively illuminate hazardous work areas, then easily stowed and transported
between uses. This unit contains a 70 watt dual ended metal halide lamp and is capable of illuminating 7,000 square feet of work space with
5,500 lumens of light. The 70 watt metal halide lamp produces illumination equivalent to a typical 400 watt halogen bulb while drawing only 70
watts at .58 amps.
The metal halide lamp on this tower is mounted with a removable spun aluminum pedestal base. Operators can remove the lamp from the tower
and use the lamp independently as a portable pedestal light in areas where using the tower is impractical.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
The non sparking collapsible tripod weighs under 8 pounds and can be extended to 9 feet and collapsed to 4 feet. Both the shaft and the legs are
completely collapsible, making it ideal for applications where portability is ideal. The tripod can be easily detached from the light aiding in
deployment, storage and transport. The tripod affords operators the ability to quickly and securely elevate this lamp, increasing its effective
coverage of the work area. The lamp can be easily adjusted up, down or from side to side and locked into position. Operators can also remove
the lamp from the tripod and utilize it as a standard pedestal light when using the tripod is impractical and a more portable light is needed.
The lamp housing is waterproof and constructed of thick copper free aluminum alloy, making it ideal for use in wet and marine environments. The
metal halide lamp provides 7,000 square feet of coverage with good color rendering and object contrast. This unit's lamp assembly includes a 70
watt metal halide bulb, internal ballast and aluminum finish reflector in a copper-free cast aluminum housing with a thermoset powder coat finish.
The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of thermal shock and impact resistant
tempered glass and the housing contains threaded joints lubricated with non-drying lubricant.
The metal halide lamp in this unit has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of
damage should the tower be knocked over, unlike incandescent lamps which may break or shatter. The lamp is rated at 10,000+ hours of life
providing longer service life than typical halogen lamps. The lamp operates with 120 VAC and is supplied with 100 feet of 16/3 SOOW cord
ending in an explosion proof straight blade plug.
Suggested Applications: include but are not limited to wastewater treatment plants, refinery tanks, oil and gasoline loading docks, coal
pulverizing facilities, munitions storage areas, tunnel projects, utility gas plants, power plant areas, hazardous areas and mining conveyor belts.
Cross for Chambers Power Products TL1570MH-120V.
Made in the USA Quality
Metal Halide Benefits
02/09/2015
Page: 136
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
1. High Efficiency Metal Halide lamp.
2. 70 Watt Output Comparable to 400W Halogen.
3. Rugged Die Cast Aluminum Lamp Housing.
4. 3/4" Shock Resistant Tempered Glass Lens.
5. Copper Free Shell, Covers and Sealed Fittings.
6. Vibration/Impact Resistant Construction.
7. Low Maintenance.
8. Tripod Adjustable from 4 Foot to 9 Foot Height.
9. 100 foot 16/3 SOOW Cord.
10. UL Approved for Marine Environments.
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering.
5. Vibration and shock resistant.
6. Low maintenance.
Specifications / Additional Information
RNT-EPL-BS-70-TP1-100 Tripod Mounted
U.L. Ratings
UL Listing: United States - Canada
Class I & II, Division 1 & 2, Groups C,D
Dimensions Lamp Only: W-13 1/4" D-12 1/2" H-11 1/2"
Class II Division 1 & 2, Groups F, G
Weight: 56 lbs. including Tripod
Class III
Total Watts: 70 watts
UL 781 portable HAZLOC use
Voltage: 120 Volts AC, .58amp draw
ECP 1523 5-15P explosion proof plug
Coverage: 7,000 square feet
UL Certified- U.S - CSL
Lamp Life Expectancy: 10,000+ Hours
Lamp Type: Metal Halide
Operating Temp Range: T4 rated
Mounting: Non Sparking 4' to 9' Extendable Tripod
Special Orders- Requirements
Wiring: 100' SOOW Cord ECP1523 plug
Contact us for special requirements
Beam Lux: >8500@ 1 Meter 1250@ 3 Meters
Toll Free: 1-800-369-6671
U.L Approval: U.S Certificate Canada Certificate
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental prices for the EPL-TP-1X70-100 ;
Monthly...$498.00 USD
Weekly...$300.00 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 137
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 138
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
RENT* Explosion Proof Light - Quadpod Mount - 70 Watt Metal Halide Light - Class 1 Div 1 - Wet Areas
Part #: RNT-EPL-TP-1X70-100
Price: $2,418.75
Made in the USA
The Larson Electronics EPL-TP-1X70-100 Quadpod Mounted Explosion Proof Metal Halide Light is U.L. approved Class I & II, Division 1
& 2 and is rated for use in wet and marine environments. The quadpod mount and metal halide lamp used with this unit provide
operators with excellent power and efficiency coupled with high versatility and ease of use.
This unit is for RENTALS
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS*
A single 70 watt, explosion proof, metal halide lamp mounted on our non-sparking adjustable and wheeled quadpod gives operators an easily
deployable source of powerful light that can be quickly setup and adjusted to effectively illuminate hazardous work areas. This unit contains a 70
watt, dual ended, metal halide lamp and is capable of illuminating 13,000 square feet of work space with 32,000 lumens of light. The 70 watt
metal halide lamp on this unit produces illumination equivalent to typical 400 watt halogen lamps while drawing only 70 watts at .58 amps.
The metal halide lamp runs cooler than 400 watt halogen lamps, resulting in an easier to handle unit and less heat in the workspace. This unit's
durability, easy deployment, high power and the good color rendering of its metal halide lamp make it ideal for close work and hazardous areas
where safety, detail and accuracy are critical.
02/09/2015
Page: 139
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The non sparking adjustable and collapsible quadpod can be extended to eight feet and collapsed to four and a half feet while wheels on the
base of tripod enable the operator to tilt the unit back and reposition it to a new location. The explosion proof light fixture can be removed by
releasing the hand knob and sliding the light and mounting bracket off of the quadpod center support while the legs can be collapsed, aiding in
deployment, storage and transport. The quadpod affords operators the ability to quickly and securely elevate the lamp, increasing the effective
coverage of the work area. The lamp can be easily adjusted up, down or from side to side and locked into position. The lamp housing is
waterproof and constructed of thick copper free aluminum alloy, making this unit ideal for use in wet and marine environments. The metal halide
lamp provides 13,000 square feet of coverage with good color rendering and object contrast.
This units lamp assembly includes a 70 watt metal halide bulb, internal ballast and aluminum finish reflector in a copper-free cast aluminum
housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is
constructed of 3/4" thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying
lubricant. The metal halide lamp has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of
damage should the tower be knocked over, unlike incandescent lamps which may break or shatter. The lamp is rated at 25000+ hours of life
providing longer service life than typical halogen lamps. This tripod mounted light system operates with 120 VAC and is supplied with 100 feet of
16/3 SOOW cord ending in an explosion proof straight blade plug.
Suggested Applications: include but are not limited to wastewater treatment plants, refinery tanks, oil and gasoline loading docks, coal
pulverizing facilities, munitions storage areas, tunnel projects, utility gas plants, power plant areas, hazardous areas and mining conveyor belts.
Cross for Chambers Power Products TL1570MH-120V.
Made in the USA Quality
Metal Halide Benefits
1. High Efficiency Metal Halide lamps.
2. 70 Watt Output Lamp Comparable to 400W Halogen.
1. Long lamp life.
3. Rugged Die Cast Aluminum Lamp Housing.
4. 3/4" Shock Resistant Tempered Glass Lens.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
5. Copper Free Shell, Covers and Sealed Fittings.
6. Vibration/Impact Resistant Construction.
4. High output and very good color rendering.
5. Vibration and shock resistant.
7. Low Maintenance.
8. Quadpod Adjustable from 4.5 to 8 Foot Height.
6. Low maintenance.
9. 100 foot 16/3 SOOW Cord.
10. UL Approved for Marine Environments.
02/09/2015
Page: 140
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
EPL-TP-1X70-100 Quadpod Mounted
U.L. Ratings
UL Listing: United States - Canada
Class I & II, Division 1 & 2, Groups C,D
Dimensions Lamp Only: W-13 1/4" D-12 1/2" H-11 1/2"
Class II Division 1 & 2, Groups F, G
Weight: 60 lbs. including quadpod
UL 595 Marine Type
Total Watts: 70 watts
UL 781 listed for portable HAZLOC use
Voltage: 120 Volts AC, .58 amp draw
ECP 1523 5-15P explosion proof plug
Coverage: 13,000 square feet
UL Certified- U.S - CSL
Lamp Life Expectancy: 25000+ Hours
Lamp Type: Metal Halide
Operating Temp Range: T4 rated
Mounting: 4.5' to 8' Extendible Wheeled Quadpod
Special Orders- Requirements
Wiring: 100 ft. SOOW Cord ECP1523 plug
Contact us for special requirements
Total Lumens: 32,000
Toll Free: 1-800-369-6671
U.L Approval: U.S Certificate Canada Certificate
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental prices for the EPL-TP-1X70-100 ;
Monthly...$498.00 USD
Weekly...$300.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-Same Day Shipping Available!
02/09/2015
Page: 141
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 142
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 143
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Electric Inline Axial Fan - Class I, Div. I - 15' Conductive Duct - 1/3 HP Engine - RENTAL
Part #: RNT-EPF-10P.3
Price: $2,263.65
Made in the USA
This Unit is a Rental
The Larson Electronics RNT-EPF-10P.3 Explosion Proof Electric Inline Axial Fan with 21 foot static conductive duct is UL and CUL
listed and safely and effectively redirects stale air from hazardous location areas. This fan includes a 15 foot static conductive duct
and a shorter 6 foot conductive duct, is designed for portability, and can be linked in series when larger lengths of conductive duct are
needed.
This explosion proof fan delivers high-performance airflow with a 1,390 overall CFM rating and 973 CFM when fitted with a 25ft. duct and a 90
degree bend. The 1/3 horsepower electric motor runs from standard 115 VAC and pulls 12.6 amps. Added safety features include a prewired
explosion proof switch, dual grounding lugs on the steel housing, and 10 feet of cord fitted with a 5-15 straight blade explosion proof plug. Meets
UL and Canadian UL safety ratings for Class 1, Division 1, Groups C and D & Class II Division 1, Groups E, F and G.
This explosion proof fan is designed for portability and durability with a light weight compact body constructed of powder coated steel and a nonsparking aluminum blower wheel. Rubber coated base feet and an integral carry handle provide easy transport and secure placement when set
down on a flat surface. This unit is available with either an 8 inch or 10 inch intake and exhaust flange, and includes a built in automatic reset
thermal overload for added protection.
Note on Explosion Proof Fans: Can be used as an intake and an exhaust fan.
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Click Photo to Enlarge
Page: 144
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
INCLUDES:
1. Hazardous location ventilation fan (blower)
2. 15 feet static conductive duct
3. 6 feet static conductive duct
4. Dust carrier (holds up to 50ft. of duct)
5. Universal mount
6. Static conductive 90 degree elbow for saddle vent
7. Static conductive saddle vent
Features:
• 1/3 HP electric motor, 115 VAC, 12.6 amp
• Explosion-proof switch installed and wired
• 8 or 10 inch intake and exhaust flange
• 1390 cfm free air delivery
• 973 cfm when a 25ft. duct and a 90 degree bend are present while in
use.
• 72 dbA @ 3ft.
• Approved for Class I, Div. 1, Groups C and D and Class II, Div. 1,
Groups E, F, G
• Aluminum non-sparking blower wheel
• Dual grounding lugs installed on steel housing
• All Steel, powder coated red with rubber base feet
• Automatic reset thermal overload
• Carry handle frame
• Pre-Wired With 10 Ft. Cord
• Pre-wired with a 15 amp explosion proof 5-15 style plug
The ducts on this fan consist of single-ply polyester reinforced PVC vinyl fabric hose with an external wear strip reinforced with a spring steel wire
helix. The ducting is lightweight for these blower applications and is highly compressible. The retractability of the static conductive duct allows for
convenient storage and easy transport in a fraction of its fully extended length and has low friction loss. The wearstrip offers external abrasion
resistance, and is listed as YL 94 V-0 flame retardant. Ambient temperature for the fan ranges from -20 degrees to 180 degrees Fahrenheit.
Specifications / Additional Information
RNT-EPF-10P.3Explosion Proof Inline Axial Fan
UL and C-UL Listed
Air consumption: 38 cfm
Class I, Div. 1, Groups C and D
Voltage: 115 VAC
Class II, Div. 1, Groups E, F, G
Amps : 86 Dba12.6
T3C Temp rating -30C to 160C
Motor: 1/3 Horsepower
Meets UL and Canadian UL Safety Ratings
CFM Delivery : 1390
Noise Level: 72 dbA @ 3ft
Fan Type: Inline Axial Fan
Size: 16”W x 16.75”H x 12.5”D
Special Orders- Requirements
Wiring: 10 Foot Cord w 5-15 Exp Proof Plug
Contact us for special requirements
Protection: Dual Lug Ground Body/Automatic Reset Thermal Overload Toll Free: 1-800-369-6671
Intl: 1-903-498-3364
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us Toll Free: at 1-800-369-6671 or (903)
498-3363 for further information if required.
Rental prices for the EPF-10P.3;
Monthly...393.00 USD
Weekly...236.20 USD
Scroll Down to Purchase- Same Day Shipping
02/09/2015
Page: 145
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpectrumChart
02/09/2015
Page: 146
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof Paint Spray Booth LED Light on Dolly Cart with Wheels - 2nd Gen - 4 Foot 2
Part #: RNT-EPLCD-48-2L-LED-G2
Price: $2,254.00
*THIS UNIT IS FOR RENTALS*
Made in the USA
The Larson Electronics RNT-EPLCD-48-2L-LED-G2 Explosion Proof Paint Spray Booth Light on Dolly Cart is U.S./Canada U.L.
approved Class 1 Division 1, Class II Division 1, T6 rated, and offers a versatile lighting solution for applications requiring exceptional
work area lighting coverage.
The RNT-EPLCD-48-2L-LED-G2 dolly cart mounted explosion proof LED light is UL listed Class 1 Division 1 and Class II Division 1 & 2 and
offers operators the ability to quickly and easily add a full power light wherever it is needed. This unit incorporates a Larson Electronics EPL-482L-LED-G2 explosion proof fixture equipped with two 28 Watt LED T-series tube lights into a mobile dolly cart style platform. This configuration
allows operators to wheel this light fixture into position next to the target or lay it flat to provide illumination beneath the target.
This T6 rated explosion proof LED light and dolly cart offers an excellent lighting solution for operators who need illumination in unusual areas
where traditional fixed mount lighting is obstructed or cannot effectively reach.
02/09/2015
Page: 147
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
There is no ballast in this unit and the included LED T-series lamps have a 50,000+ hour service life, both of which result in extreme efficiency,
cooler operation and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage
from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The lamps are protected by heat
and impact resistant Pyrex tubes and an additional plexiglass lens which provides added protection from impacts and overspray. The light fixture
is constructed of copper free aluminum alloy and is shipped with a 50' SOOW cord and explosion proof plug. The lamp reflectors are corrosion
resistant heavy gauge aluminum and coated with a high gloss reflective finish.
The 28 watt LED lamps produce 30% more illumination than standard T8 bulbs. The EPLCD-48-2L-LED-G2 is multi-voltage (not multi-tap) and
works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. We also make a 12-32V version for low
voltage applications (-LV suffix) for both AC and DC power.
Suggested Applications: PAINT SPRAY BOOTHS, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing
plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.
Made in USA Quality
Superior LED Benefits
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture.
3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy
4. No ballast box. No ballast to replace. We simply run the black wire
to one end of the bulb and white wire to the other.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture,
while some competitive models require the “tap and knock off” method
to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp
protection.
1. Extreme long life..
2. High efficiency and low amp draw..
3. High durability and reliability..
4. Small size and light weight.
5. 100% recyclable.
6. No toxins-lead, mercury.
7. High light output..
8. Consistent color over time.
9. High Versatility.
10. No fragile glass used in construction.
12. Vibration/impact resistant.
02/09/2015
Page: 148
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPLCD-48-2L-LED-G2 Explosion Proof Fixture
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 1, Groups C and D
Dimensions: W-11.25" L-52" H-8.5 "
Class 1 Division 2, Group A,B,C,D
Weight: 65 Lbs.
UL 595 Outdoor Marine Type (Saltwater)
Total Watts: 56 watts
UL 844, 924
Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz
UL 1598 Marine Type
Low Voltage (Optional): 12-32V Ac or Dc power
Class II, Division 1 - 2, Groups E,F,G
LED Lamp Life Expectancy: 50,000+ Hours
UL Certified US/Canadian Standards
Efficiency: 98.21 Lumens per Watt
UL listed for Paint Spray Booths
Operating Temp Range: T6 Rated -40 C to 85 C
Minimum Operating Temp: -30 C
Special Orders- Requirements
Maximum Case Temp: 90 C
Contact us for special requirements
Beam Angle: 150 degrees
Color Temp: 5600K
Toll Free: 1-800-369-6671
Mounting: Dolly Cart Mounted
Intl: 1-903-498-3363
Wiring : 50' SOOW cord - Explosion Proof Plug
E-mail: [email protected]
U.L Approval: U.S Certificate Canada Certificate
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EPLCD-48-2L-LED-G2:
Monthly...$410 .00 USD
Weekly...$307.50 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
*5 year warranty replacement on this LED light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Scroll Down to Purchase-
02/09/2015
Page: 149
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 150
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof LED Tank Light - Portable Wheelbarrow Cart - Class 1 Division 1 - 12,500 LM
Part #: RNT-EPL-16C-150LED-RT
Price: $2,194.00
Made in the USA
*This unit is for rentals*
The RNT-EPL-16C-150LED-RT Explosion Proof Portable Tank Light from Larson Electronics is rated Class 1 & 2, Divisions 1 & 2 and
uses LEDs to produce 12,500 lumens of light while drawing only 150 watts. The solid state design and wheeled base make this light
cart ideal for areas requiring portable work area illumination within environments where explosive gases, vapors, and dust exist or
stand the potential to exist.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHT CART*
The RNT-EPL-16C-150LED-RT is a cart mounted explosion proof LED light that provides 10,000 square feet of work area coverage with 12,500
lumens of illumination. This portable LED cart light has a removable light head measuring 16 inches by 14 inches which allows the unit to fit
through the standard sized manholes or entry passages commonly found in the petrochemical and marine industries. Often referred to as
simply a “tank light,” this unit is considered universal due to its ability to be passed through any conventional manhole such as those found in
petrochemical containers and ship storage tanks.
02/09/2015
Page: 151
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The LED light head produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and further adds to this units desirability
as a portable tank lighting solution. This portable LED light cart is comprised of a removable 16 inch by 14 inch LED light head mounted atop a
solid rubber wheeled, wheelbarrow style cart fabricated from non sparking aluminum. Transferring the unit through manholes consists of simply
removing the light head from the cart, passing the light head and cart through the manhole separately, and then reassembling the unit once
inside. Included with this LED light cart is 250 feet of SOOW cord which combined with the 360° of rotation and 90° of tilt offered by the LED
light head provides an effective alternative to often cumbersome explosion proof string lights.
The explosion proof LED light head in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With
traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains
twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a
driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event of an LED failure, the mating
LED will continue to operate.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of
heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that
illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and
provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler
than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of
light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
This portable work light is universal voltage capable and can be operated with 100-277 VAC, 50/60Hz. We also offer a low voltage version of
this LED fixture that operates on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and
protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and
resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs
and electronics. This lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer
than incandescent or fluorescent lamps. The light head can be removed and used separately from the cart for added convenience.
Made in USA Quality
Superior LED Benefits
1. Class 1 Division 1-2 Class II Division I-2 Approved
2. Fixture arrives assembled and lamped to reduce installation time
and cost.
3. Cart constructed of corrosion resistant copper free aluminum.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs.
6. Solid rubber tires. No flats or tube replacements.
7. 25 peel off Mylar overspray lamp protectors ship with the unit.
8. 12,500 Lumens produced from only 150 watts.
9. Mercury free shock proof LED lamp light head.
02/09/2015
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
9. Vibration/impact resistant.
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
Page: 152
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-16C-150LED-RT Explosion Proof Tank Light
Quick Summary
Listing: United States & Canada
Class 1 Division 1, Groups C and D
Lamp Type: LED
Class 1 Division 2, Groups A,B,C,D
Dimensions: 16" x 14" Light head
Class 2, Divisions 1 & 2, Groups E,F,G
Total Watts: 150 watts
Class 3, Divisions 1 & 2
Lumens: 12,500
T5 Temperature Rating
Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC
Certified to UL844 and C22.2 Standards
Mounting: Non Sparking Aluminum Cart w/ Rubber Wheels
Paint Spray Booth Approved
Weight: 65 Lbs.
DLC Approved
Lighting Configuration: Flood Pattern
IP67 Rated Waterproof
Temp Rating: T5 -50C to +65C
Multiple Driver Banks
Color Temp: 5600K
80% Lumen Retention after 50,000 Hours
Color Rendering Index: >75 CRI
LED Lamp Life Expectancy: 60,000 Hours
Special Orders- Requirements
Beam Lux: 9000@ 1 Meter - 1750@ 3 Meters
Contact us for special requirements
Wiring: 250' 16/3 SOOW Cord Explosion Proof Straight Blade Plug
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Scroll Down to Purchase-
02/09/2015
Page: 153
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 154
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof Light on Adjustable Rail/Ladder Bracket Mount - 150W High Pressure Sodium
Part #: RNT-EPL-JH-150W-150-120V
Price: $2,190.00
Made in the USA
THIS UNIT IS FOR RENTALS
The RNT-EPL-JH-150W-150-120 high pressure sodium hazardous area light fixture from Larson Electronics is
capable of illuminating an area 16,000 square feet in size. Weather proof and U.L. listed for marine use, this high
pressure sodium lamp comes attached to an aluminum rail/ladder mount bracket that allows operators to easily
mount this unit to ladders, handrails, catwalks and other similar structures..
The versatile RNT-EPL-JH-150W-150-120 bracket mounted high pressure sodium fixture from Larson Electronics is
weatherproof and comes with an adjustable aluminum ladder/scaffold mount that makes it ideal for industrial applications,
maintenance, cleaning and servicing duties, large open space hazardous work areas and any Class 1 DIV 2 Groups
A,B,C,D area where ladders, scaffolding and other railings provide opportunities for mounting. This unit contains a 150
watt high pressure sodium lamp and is capable of illuminating 16,000 square feet of work space.
The 150 watt high pressure sodium lamp produces illumination equivalent to a typical 400 watt halogen bulb while drawing
only 150 watts at 1.25 amps. The high pressure sodium lamp runs cooler than a 400 watt halogen, resulting in an easier to
handle unit and less heat in the workspace. The aluminum rail/ladder bracket can be adjusted from 26 inches to 43 inches
to allow mounting to a wide variety of railings, scaffoldings or ladders.
02/09/2015
Page: 155
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
This units' lamp assembly includes a 150 watt high pressure sodium bulb, internal ballast and aluminum finish reflector in a
copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also
made of copper-free aluminum. The lens is constructed of thermal shock and impact resistant tempered glass and the
housing contains threaded joints lubricated with non-drying lubricant. The high pressure sodium lamp in this unit has no
filament and is thus highly resistant to damage from shocks or impacts. The lamp is rated at 25000+ hours of life providing
longer service life than typical halogen lamps. The lamp operates with 120 VAC and is supplied with 100 feet of 16/3
SOOW cord ending in an explosion proof straight blade plug.
This light is highly durable and produces high light output in a wide flood pattern. The lamp is mounted to an aluminum
bracket with adjustable J-hook bottom bracket that enables operators to securely mount the light to any ladder or
scaffolding. Lamp adjustment is via an adjustable yoke that allows the operator to adjust the lamp both vertically and
horizontally. All hardware on this unit is non sparking/corrosion resistant and the included explosion proof cord is resistant
to damage from chemicals and abrasion.
Suggested Applications: include, but are not limited to, wastewater treatment plants, refinery tanks, oil and gasoline
loading docks, coal pulverizing facilities, munitions storage areas, tunnel projects, utility gas plants, power plant areas,
hazardous areas and mining conveyor belts.
Made in the USA Quality
Metal Halide Benefits
1. High Efficiency High Pressure Sodium lamp.
2. 150 Watt Output.
3. Rugged Die Cast Aluminum Lamp Housing.
4. 3/4" Shock Resistant Tempered Glass.
5. Heavy Duty Checmical/Abrasion Resistant Cord.
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering.
5. Vibration and shock resistant.
6. Low maintenance.
6. 120 Volt Operation.
7. Low Maintenance.
8. Adjustable Ladder/Scaffold Mount.
9. Yellow Powder Coat Paint Finish
10. UL Approved for Marine Environments.
02/09/2015
Page: 156
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-JH-150W-150-120 High Pressure Sodium
U.L Ratings
Lamp Type: High Pressure Sodium
Class I & II, Division 1 & 2, Groups C,D
Lamp Only Dimensions:W-13 1/4" D-12 1/2" H-11 1/2"
Class II Division 1 & 2, Groups F, G
Bracket Dimensions: Adjustable from 26" to 43"
Class III
Watts: 150
UL 781 portable HAZLOC use
Lamp Life Expectancy: 25000+ Hours
ECP 1523 5-15P plug
Voltage: 120VAC
UL 595 for Marine Type
Lighting Configuration: Flood Pattern
UL Listed U.S. / CSL
Mounting:Aluminum Ladder/Scaffold Bracket
Operating Temp Range: T4 rated
U.L. Listing: Marine Saltwater Use
Special Orders- Requirements
Wiring: 100 ft SOOW Cord ECP1523 plug
Contact us for special requirements
Toll Free: 1-800-369-6671
U.L Approval: U.S Certificate Canada Certificate
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work,
Larson Electronics processes rentals like purchases until the product is
returned. (Rent to Own Rates) This means, we will charge the customer for
the product total and credit back the difference once the fixture is returned.
Weekly and Monthly terms are available. Customer must pay shipping to
and from the destination. Please contact us at (903) 498-3363 for further
information if required.
Rental prices for the RNT-EPL-JH-150W-150-120V;
Monthly...237.50 .00 USD
Weekly...172.25 USD
Subtract rental cost from total cost for the amount that will be credited back
to customer upon return of product. Customer can choose to convert their
rental to a purchase at any time during the rental period. When returned,
deductions will also be made for shipping, repairs, and excessive cleaning,
if needed.
Scroll Down to Purchase - 3-4 Day Lead Time on This Light
Links (Click on the below items to view):
- STEP
- DXF
02/09/2015
Page: 157
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof LED Light Rental - 150 Watt LED Class 1 Class 2 Light with Pedestal Base - 100' Cord
Part #: RNT-EPL-BS-161M-100
Price: $2,136.00
02/09/2015
Page: 158
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in USA
This unit is for RENTALS
The EPL-BS-161M-100 Explosion Proof LED Light from Larson Electronics is rated Class 1 Division 1-2 Groups C & D and Class 2
Division 1-2 and uses a 16 inch LED light head to produce 10,000 lumens of light while drawing only 150 watts.
The EPL-BS-161M-100 explosion proof LED light provides 8,000 square feet of work area coverage with 10,000 lumens of light output. This
portable LED light is mounted to an aluminum base and has an LED light head measuring 16 inches in diameter. The LED light head on this unit
produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flamable vapors, gases and
dusts may be present.
This explosion proof LED light fixture is comprised of a 16 inch LED light head mounted atop a base stand fabricated from non sparking
aluminum with a convenient built incarrying handle . The lamp can be easily adjusted up or down 90 degrees and locked into position by simply
loosening the two hand screws located on either side of the light head and retightening them once the desired angle is found. Included with this
LED pedestal light is 25 feet of SOOW cord terminating in an 1523 explosion proof straight blade plug.
This unit is also multi-voltage capable and can configured to operate on 120-277 volts 50/60 Hz. Further adding to the versatility and
convenience this explosion proof LED light are 25 peel off mylar overspray lamp protectors that ship with the unit. The protectors provide lamp
protection from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This
lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or
fluorescent lamps.
Made in USA Quality
Superior LED Benefits
1. Approved Class 1 Div1-2 Class2 Div I-2
2. Led lamp head requires no lamping.
3. Durable Base Mount constructed of copper free aluminum.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs.
6. Adjustable LED light head.
7. 25 peel off mylar overspray lamp protectors ship with the unit.
8. 10,000 Lumens produced from only 150 watts.
9. Mercury free shock proof LED lamp light head.
02/09/2015
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
9. Vibration/impact resistant.
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
Page: 159
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
EPL-BS-161M-100 Explosion Proof LED Tripod
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 16' Light head
Class 1 Division 2, Group A,B,C,D
Weight: 35 Lbs
Class II, Division 1 - 2, Groups E,F,G
Total Watts: 150 watts
UL Certified U.S. Standards
Voltage: Configurable 120V-60hz 220V-50hz 240V-60hz 277V-60hz
ECP1523 Class 1 explosion proof plug
LED Lamp Lumens: 10,000
LED Lamp Life Expectancy: 60,000 Hours
Mounting: Aluminum Pedestal Base
Wiring: 100 feet SOOW Cord Explosion Proof Straight Blade Plug
Operating Temp Range: T5 Rated -40C to 65C
Special Orders- Requirements
Color Temp: 6000K
Contact us for special requirements
Beam Lux: 8500@ 1 Meter 1250@ 3 Meters
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental prices for the EPL-BS-161M-100 ;
Monthly...$550.00 USD
Weekly...$175.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 160
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 161
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Explosion Proof LED Light Rental
- Hi-Res Image 2 - Explosion Proof LED Light Rental
- Hi-Res Image 3 - Explosion Proof LED Light Rental
- Hi-Res Image 4 - Explosion Proof LED Light Rental
- Hi-Res Image 5 - Explosion Proof LED Light Rental
- Hi-Res Image 6 - Explosion Proof LED Light Rental
- Hi-Res Image 7 - Explosion Proof LED Light Rental
02/09/2015
Page: 162
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
RENTAL Explosion Proof LED Light - Non-Spark Aluminum Base - Single 150 Watt Led Light RENTAL
Part #: RNT-EPL-BS-161M-100
Price: $2,136.00
02/09/2015
Page: 163
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in USA
This unit is for RENTALS
The EPL-BS-161M-100 Explosion Proof LED Light from Larson Electronics is rated Class 1 Division 1-2 Groups C & D and Class 2
Division 1-2 and uses a 16 inch LED light head to produce 10,000 lumens of light while drawing only 150 watts.
The EPL-BS-161M-100 explosion proof LED light provides 8,000 square feet of work area coverage with 10,000 lumens of light output. This
portable LED light is mounted to an aluminum base and has an LED light head measuring 16 inches in diameter. The LED light head on this unit
produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flamable vapors, gases and
dusts may be present.
This explosion proof LED light fixture is comprised of a 16 inch LED light head mounted atop a base stand fabricated from non sparking
aluminum with a convenient built incarrying handle . The lamp can be easily adjusted up or down 90 degrees and locked into position by simply
loosening the two hand screws located on either side of the light head and retightening them once the desired angle is found. Included with this
LED pedestal light is 100 feet of SOOW cord terminating in an 1523 explosion proof straight blade plug.
This unit is also multi-voltage capable and can configured to operate on 120-277 volts 50/60 Hz. Further adding to the versatility and
convenience this explosion proof LED light are 25 peel off mylar overspray lamp protectors that ship with the unit. The protectors provide lamp
protection from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This
lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or
fluorescent lamps.
Made in USA Quality
Superior LED Benefits
1. Approved Class 1 Div1-2 Class2 Div I-2
2. Led lamp head requires no lamping.
3. Durable Base Mount constructed of copper free aluminum.
4. No ballast box. No ballast to replace.
5. Extreme long life LEDs reduce maintenance and replacement costs.
6. Adjustable LED light head.
7. 25 peel off mylar overspray lamp protectors ship with the unit.
8. 10,000 Lumens produced from only 150 watts.
9. Mercury free shock proof LED lamp light head.
02/09/2015
1. 50,000+ hour lifespan.
2. Can SAVE 50% or more on energy.
3. 100% recyclable.
4. No toxins-lead, mercury.
5. No UV light, infrared radiation or CO2 emissions.
6. Bright, even light maintains consistent color over time.
7. Instant on/off – No flickering, delays or buzzing.
8. Very good color rendering.
9. Vibration/impact resistant.
10. Significantly cooler operation.
11. Less frequent outages, higher output improves workplace safety.
Page: 164
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
EPL-BS-161M-100 Explosion Proof LED Tripod
Quick Summary
UL Listing: United States
Class 1 Division 1, Groups C and D
Dimensions: 16' Light head
Class 1 Division 2, Group A,B,C,D
Weight: 30 Lbs
Class II, Division 1 - 2, Groups E,F,G
Total Watts: 150 watts
UL Certified U.S. Standards
Voltage: Configurable 120V-60hz 220V-50hz 240V-60hz 277V-60hz ECP1523 Class 1 explosion proof plug
LED Lamp Lumens: 10,000
LED Lamp Life Expectancy: 60,000 Hours
Mounting: Aluminum Pedestal Base
Wiring: 100 feet SOOW Cord Explosion Proof Straight Blade Plug
Operating Temp Range: T5 Rated -40C to 65C
Special Orders- Requirements
Color Temp: 6000K
Contact us for special requirements
Beam Lux: 8500@ 1 Meter 1250@ 3 Meters
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental prices for the EPL-BS-161M-100 ;
Monthly...$550.00 USD
Weekly...$175.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 165
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 166
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 -
02/09/2015
Page: 167
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof 3 Outlet Extension Cord - 3 Outlets with 100 foot cord - RENTAL
Part #: RNT-EPEXC-3X-100
Price: $2,034.50
Made in the USA
This unit is for rentals
Larson Electronics 100', Three Receptacle, Explosion Proof Extension Cord Class1 Division 1 and Class2 Division 1
The Larson Electronics RNT-EPEXC-3X-100 Explosion Proof extension cord allows operators to safely extend the range of their explosion proof
light or equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 100 feet of 14/3 SOOW explosion
proof cord and are rated at 20 amps of continuous service. The cord is chemical and abrasion resistant and comes with three inline, 20 amp,
explosion proof receptacles installed on one end and a standard explosion proof plug installed on the other end. We also include a single extra
matching plug for operators to attach to their equipment which allows them to avoid any issues with plug and receptacle equipment compatibility
with this cord. This unit enables multiple connections from a single cord.
The receptacle contacts are deep recessed to avoid accidental contact and will accept standard non explosion proof plugs that are NEMA 5-20R,
or 6-20R compatible although explosion proof plugs must be used to preserve explosion proof approval in hazardous environments. Ordinary
location plugs will NOT activate this cord's explosion proof receptacle.
The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug
and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the
highest safety, operators should make connections outside of the hazardous area.
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Page: 168
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Inter-Compatibility: These cords use T style plugs and will work with non-explosion proof standard receptacles and plugs (NEMA 5-15R, 5-20R,
or 6-20R) but will not work with standard 120V wall outlets. The included plugs and receptacles are cross-interchangeable with Crouse Hind™
part# ENP5201 plugs and receptacles and Hubble-Killiark part# UGP-20231 ACCEPTOR® plugs and receptacles. Any equipment requiring
these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we
have made every effort to ensure cross compatibility correctness.
Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations
Where Combustible Dust is Present.
Specifications / Additional Information
RNT-EPEXC-3X-100 Explosion Proof Extension Cord
Plug / Outlet Certifications
Amp Rating: 20 amp Continuous Service
Class 1 Div 1 Groups C and D
Dimensions: Cord-100 Feet Plug-2.78"-L 1.75"-W
Class 2 Div 1 Groups E, F and G
Configuration: 3 Pole 2 Wire
Suitable Plug Cable Diameter: .538” to .639”
Receptacle Specs: 3 Receptacles Inline
Configuration: 3 Pole 2 Wire
Materials: Copper Free Aluminum
Dims:- Single Receptacle- 3"-W X 5.69"-D X6.13"-H
Mating Plugs: ****EPP-15A, EPP-20-A****
Special Orders- Requirements
Finish: Epoxy Powder Coat
Contact us for special requirements
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
U.L. Certification
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-EPEXC-3X-100;
Monthly...225.00 USD
Weekly...125.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 169
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Explosion Proof 3 Outlet Extension Cord
- Hi-Res Image 2 - Explosion Proof 3 Outlet Extension Cord
- Hi-Res Image 3 - Explosion Proof 3 Outlet Extension Cord
02/09/2015
Page: 170
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Fan (Blower) - Hazardous Location Ventilation - Class I Div. I - Electric - RENTAL
Part #: RNT-EPF-8P-E
Price: $1,978.00
02/09/2015
Page: 171
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
This unit is a Rental
The Larson Electronics RNT-EPF-8P-E Explosion Proof Fan/Blower with 25 foot static conductive duct safely and
effectively redirects stale air from hazardous location areas. This explosion proof blower meets UL, Canadian UL
and CE standards for hazardous locations, is suitable for confined spaces, and provides high 1,570 CFM output
for effective airflow in larger spaces.
This electrically powered explosion proof fan (blower) is suitable for confined spaces and is approved to UL , CUL, and CE
safety standards for hazardous locations. This fan features a high efficiency 3/4 hp motor which is fully enclosed, and an
aluminum, non-sparking blower wheel for high output and protection against accidental ignitions. This fan has 8 inch intake
and exhaust flanges and produces 1,570 CFM of air output for excellent movement of air in large areas.
The entire fan and motor assembly is fitted to a heavy duty dual carry frame constructed of powder coated steel with steel
safety guards and insulated foot pads for easy setup and transport. Other features include an explosion-proof switch,
installed static grounding lug, and a 25 foot cord fitted with a 15 amp, explosion proof plug.
Note on Explosion Proof Fans:Can be used as an intake and an exhaust fan.
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Click Photo to Enlarge
Page: 172
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Features
• 3/4 HP electric motor, 115 VAC, 12.6 amp
• Explosion-proof switch installed and wired
• 8 inch intake and exhaust flange
• 1570 cfm free air delivery
• 76 dbA @ 3 feet
• Approved for Class I, Div. 1, Groups C and D and Class II, Div. 1, Groups E, F, G
• Aluminum non-sparking blower wheel
• Static grounding lug installed
• Powder coat steel frame
• Steel safety guards
• Dual carry handle frame
• Pre-Wired With 25 Ft. Cord
• Pre-wired with a 15 amp, explosion proof plug.
The included 25 foot long duct is a single-ply polyester reinforced PVC vinyl fabric hose design with an extrernal wearstrip
reinforced with a spring steel wire helix. It is lightweight for blower applications and highly compressible. The retractability of
the static conductive duct allows for convenient storage and easy transport in a fraction of its fully extended length and has
low friction loss. The wearstrip offers external abrasion resistance, and is listed as YL 94 V-0 flame retardant. Ambient
operating temperature fro this unit ranges from -20 degrees to 180 degrees Farenheit.
02/09/2015
Page: 173
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPF-8P-E Explosion Proof Fan/Blower
Ratings / Approvals
Dimensions: 23”W x 20”H x 19”D
Class 1 Div 1, Groups C and D
Weight: 79 lbs
Class 2 Div. 1 Groups E, F, G
Noise Level : 76 dbA @ 3 feet
UL, Canadian UL and CE Standards Compliant
Motor:
T3C Temp rating -30C to 160C
3/4 Horsepower
Voltage: 115 VAC
Amps:
12.6
Fan Type: Frame Mounted Fan/Blower
CFM Delivery : 1570
Special Orders- Requirements
Wiring:
Contact us for special requirements
25Foot Cord, 15 amp, Exp Proof Plug
Ambient Operating Temp: -30 to 160 Degrees Farenheit
Toll Free: 1-800-369-6671
Intl: 1-903-498-3364
E-mail:
[email protected]
Rentals:In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders
until the product is returned. This means, we will charge the customer for the product total and credit back the difference
once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the
destination. Please contact us Toll Free: at 1-800-369-6671 or (903) 498-3363 for further information if required.
Rental prices for the RNT-EPF-8P-E;
Monthly...$447.00 USD
Weekly...$269.00 USD
Scroll Down to Purchase-
02/09/2015
Page: 174
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 175
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof Light on Adjustable Rail / Ladder / Scaffold Bracket Mount - 70 Watt
Part #: RNT-EPL-JH70-120
Price: $1,965.00
This unit is for rentals
Made in the USA
The RNT-EPL-JH70-120 metal halide hazardous area light fixture from Larson Electronics is capable of illuminating
an area 13,000 square feet in size. Weather proof and U.L. listed for marine use, this metal halide lamp comes
attached to an aluminum rail/ladder mount bracket that allows operators to easily mount this unit to ladders,
handrails, catwalks and other similar structures..
The versatile RNT-EPL-JH70-120 bracket mounted metal halide fixture from Larson Electronics is weatherproof and comes
with an adjustable aluminum ladder/scaffold mount that makes it ideal for industrial applications, maintenance, cleaning and
servicing duties, large open space hazardous work areas and any Class 1 DIV 2 Groups A,B,C,D area where ladders,
scaffolding and other railings provide opportunities for mounting. This unit contains a 70 watt dual ended metal halide lamp
and is capable of illuminating 13,000 square feet of work space. The 70 watt metal halide lamp produces illumination
equivalent to a typical 400 watt halogen bulb while drawing only 70 watts at .58 amps.
The metal halide lamp runs cooler than a 400 watt halogen, resulting in an easier to handle unit and less heat in the
workspace. The aluminum rail/ladder bracket can be adjusted from 26 inches to 43 inches to allow mounting to a wide
variety of railings, scaffoldings or ladders.
02/09/2015
Page: 176
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
This units' lamp assembly includes a 70 watt metal halide bulb, internal ballast and aluminum finish reflector in a copperfree cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of
copper-free aluminum. The lens is constructed of thermal shock and impact resistant tempered glass and the housing
contains threaded joints lubricated with non-drying lubricant. The metal halide lamp in this unit has no filament and is thus
highly resistant to damage from shocks or impacts. The lamp is rated at 25000+ hours of life providing longer service life
than typical halogen lamps. The lamp operates with 120 VAC and is supplied with 100 feet of 16/3 SOOW cord ending in
an explosion proof straight blade plug.
This light is highly durable and produces high light output in a wide flood pattern. The lamp is mounted to an aluminum
bracket with adjustable J-hook bottom bracket that enables operators to securely mount the light to any ladder or
scaffolding. Lamp adjustment is via an adjustable yolk that allows the operator to adjust the lamp both vertically and
horizontally. All hardware on this unit is non sparking/corrosion resistant and the included explosion proof cord is resistant
to damage from chemicals and abrasion.
Suggested Applications: include but are not limited to wastewater treatment plants, refinery tanks, oil and gasoline
loading docks, coal pulverizing facilities, munitions storage areas, tunnel projects, utility gas plants, power plant areas,
hazardous areas and mining conveyor belts.
Made in the USA Quality
Metal Halide Benefits
1. High Efficiency Metal Halide lamp.
2. 70 Watt Output.
3. Rugged Die Cast Aluminum Lamp Housing.
4. 3/4" Shock Resistant Tempered Glass.
5. Heavy Duty Checmical/Abrasion Resistant Cord.
6. 120 Volt Operation.
7. Low Maintenance.
8. Adjustable Ladder/Scaffold Mount.
9. Yellow Powder Coat Paint Finish
10. UL Approved for Marine Environments.
02/09/2015
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering.
5. Vibration and shock resistant.
6. Low maintenance.
Page: 177
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-JH70-120 Metal Halide
U.L Ratings
Lamp Type: Metal Halide
Class I & II, Division 1 & 2, Groups C,D
Lamp Only Dimensions:W-13 1/4" D-12 1/2" H-11 1/2"
Class II Division 1 & 2, Groups F, G
Bracket Dimensions: Adjustable from 26" to 43"
Class III
Watts: 70
UL 781 portable HAZLOC use
Lamp Life Expectancy: 25000+ Hours
ECP 1523 5-15P plug
Voltage: 120VAC
UL 595 for Marine Type
Lighting Configuration: Flood Pattern
UL Listed U.S. / CSL
Mounting:Aluminum Ladder/Scaffold Bracket
Operating Temp Range: T4 rated
U.L. Listing: Marine Saltwater Use
Special Orders- Requirements
Wiring: 100 ft SOOW Cord ECP1523 plug
Contact us for special requirements
Beam Lux: 8500@ 1 Meter 1250@ 3 Meters
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
U.L Approval: U.S Certificate Canada Certificate
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work,
Larson Electronics processes rentals like purchases until the product is
returned. (Rent to Own Rates) This means, we will charge the customer for
the product total and credit back the difference once the fixture is returned.
Weekly and Monthly terms are available. Customer must pay shipping to
and from the destination. Please contact us at (903) 498-3363 for further
information if required.
Rental Prices for the EPL-JH70-120;
Monthly...$441.67 USD
Weekly...$331.25 USD
Subtract rental cost from total cost for the amount that will be credited back
to customer upon return of product. Customer can choose to convert their
rental to a purchase at any time during the rental period. When returned,
deductions will also be made for shipping, repairs, and excessive cleaning,
if needed.
Scroll Down to Purchase - 3-4 Day Lead Time on This Light
Links (Click on the below items to view):
- STEP
- DXF
02/09/2015
Page: 178
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
RENTAL Hazardous Area Light - Pedestal Stand - 2 X 400 Watt Metal Lights - Class 1 Div 2 RENTAL
Part #: RNT-EPL-PM-2X400MH-100
Price: $1,891.50
Made in the USA
This Unit Is For Rentals
The Larson Electronics RNT-EPL-PM-2X400MH Pedestal Mounted Hazardous Area Light includes two metal halide lamps capable of
illuminating an area 50,000 square feet in size and is rated Class 1 Division 2 Groups C and D as well as wet area and marine
environment suitable.
The RNT-EPL-PM-2X400MH pedestal mounted hazardous area light provides operators in hazardous locations with a versatile lighting solution
for operations where easily managed large scale illumination of the workspace is required. Two 400 watt metal halide lamps provide light
coverage for 50,000 square feet of work area while a Class 1 Division 2 Groups C and D U.L. approval assures reliable protection against
inadvertent ignitions.
A dark warehouse, lit only by a distant 100W incandescent bulb.
Click Photo to Enlarge
Same warehouse illuminated by the RNT-EPL-PM-2X400MH
Click Photo to Enlarge
02/09/2015
Page: 179
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This hazardous area light package is designed to provide operators i hazardous locations with an easily deployed and highly stable U.L.
approved lighting platform. Included with this unit are two 400 watt metal halide lamps and 100 feet of abrasive and oil resistant SOOW cord
terminating in an ECP 1523 5-15P Class 1 Division 1 explosion proof straight blade plug. The two metal halide lamps are mounted to a metal
pedestal platform with adjustable trunnion brackets that provide vertical adjustability. A single carrying handle is included to provide easy carrying
and movement of the unit from one location to another.
The lamp housings are weatherproof and constructed of die cast aluminum featuring a hinged, removable front-access door with two captive
closure screws for easy servicing. The optical assemblies includes a precision-formed aluminum reflector and heat/impact-resistant tempered flat
door glass. The aluminum reflector has a chemically bonded, lightweight, non-breakable ALGLAS® finish on both the inside and outside surfaces
providing corrosion resistance, durability and ease of cleaning. The optical assembly contains a mogul base socket capable of handling the
higher pulse ratings of newer HID systems.
This lamp is suitable for use in areas where flammable petrochemical vapors are sometimes present. This light is highly durable, produces high
light output in a wide flood pattern, and operates effectively at temperatures to -20 degrees F. This metal halide pedestal mounted light is rated
for use in wet areas and marine environments and can be configured to operate with 120-277V, 480V, and 220-50hz VAC. Choose your desired
voltage configuration below when ordering.
Specifications / Additional Information
RNT-EPL-PM-2X400MH
U.L Ratings
Lamp Type: 2X Metal Halide
U.L Rated for Wet Area Use
Lumens: 72,000 Total
Class 1 Division 2 Groups C and D
Total Watts: 800
U.L Approved Marine Environments
Watts Per Lamp: 400
T1 Temp Rating
Voltage: 120-277/60Hz, 480, 220/50Hz
Lighting Configuration: Flood Pattern
Mounting: Pedestal Stand w/ Handle
Weight: 105lbs
U.L. Listing: Wet Area / Marine Environment Approved
Total Coverage: 50,000 Sq. Feet
Special Orders- Requirements
Wiring: 100 Feet SOOW Abrasive Oil Resistant Cord.
Contact us for special requirements
Beam Lux: 17000@ 1 Meter 2500@ 3 Meters
Phone: 1-214-616-6180
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like orders until the product
is returned. This means, we will charge the customer for the product
total and credit back the difference once the fixture is returned. Weekly
and Monthly terms are available. Customer must pay shipping to and
from the destination. Please contact us at (903) 498-3363 for further
information if required.
Rental Prices for the RNT-EPL-PM-2X400MH;
Monthly...$288.00 USD
Weekly...$215.00 USD
Scroll Down to Purchase-
02/09/2015
Page: 180
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 181
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof Low Profile Linear LED Light - C1D1 - 4 Feet - 120-277 VAC - 20 Foot Cord *
Part #: RNT-EPL-48-100LED-20C
Price: $1,850.00
Made in the USA
This Unit is a Rental
The Larson Electronics RNT-EPL-48-100LED-20C Explosion Proof LED Light Fixture is U.S./Canada U.L. approved Class 1 Divisions 1
& 2 for areas where flammable chemical/petrochemical vapors exist or have the potential to exist. This explosion proof LED light has a
T4A temperature rating and is designed for low profile mounting to make the maximum use of available space.
The RNT-EPL-48-100LED-20C is comprised of solid state design LEDs, making this explosion proof led fixture highly resistant to shock and
vibrations and cooler running than comparable incandescent and HID light fixtures. This 100 Watt LED fixture draws less than one amp on a 120
Volt AC power system while producing 7,000 lumens of bright white light, producing efficiency that reduces power consumption and operating
costs without compromising light output or quality.
02/09/2015
Page: 182
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
This explosion proof linear LED fixture contains no ballast box normally associated with fluorescent fixtures, which reduces overall weight and
creates a slimmer unit profile. The solid state LEDs have a 100,000+ hour service life, which results in extreme efficiency and greatly reduced
maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in
temperature and a lamp service life over twice that of standard T5 fixtures.
This light is multi-voltage capable and can be operated with 100-277 VAC, 50/60Hz without any need for a special ballast. The housing is
specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 7,000 lumens
with a color temperature of 5000K and a color rendering index of 70, which produces colors and details much more accurately than high pressure
sodium or mercury vapor luminaries. The RNT-EPL-48-100LED-20C is available in surface mounting and pendant mounting options and ideal for
installation in locations where space is at a premium.
High Quality Features
Superior LED Benefits
1. Low power consumption.
2. Instant on/off operation.
3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.
4. Superior color rendering compared to HPS, LPS, MV.
5. Retains 80% lumen output after 60,000 operating hours.
6. Powder coated aluminum fixture body.
7. Low profile - Light weight
8. 7,000 Lumen output from only 100 watts
02/09/2015
1. 100,000 hour lifespan.
2. Can SAVE 50% or more on energy.
3. Qualifies retrofit projects for financial incentives, including utility
rebates, tax credits and energy loan programs.
4. Reduces energy use and prolongs life-spans of peripheral cooling
units (A/C, refrigeration)
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LEED and other sustainable business
certifications.
9. Bright, even light maintains consistent color over time.
10. Instant on/off – No flickering, delays or buzzing.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
Page: 183
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-48-100LED-20C Explosion Proof Linear
U.L. Ratings
UL Listing: United States - Canada
Class 1 Divisions 1&2, Groups C & D
Dimensions: W-4.83" L-47.46" H-6.15 "
Class 2 Divisions 1&2, Groups E, F, G
Weight: 26 Lbs
UL 844
Total Watts: 100 watts
UL 1598 Marine Type
Voltage: Universal 120-277VAC 50/60 hz
UL 8750
LED Lamp Life Expectancy: 100,000+ Hours
IP66 Rated
Lumens: 7,000/ 70 Lumens Per Watt
NEMA 4X
Ambient Operating Temp Range: -40 C to 65 C
CSA 22.2 No. 137-M81
Operating Temp Rating: T4A Rated
Minimum Operating Temp: -40 C
Maximum Case Temp: 65 C
Beam Angle: 150 degrees
Color Temp: 5000K
Mounting: Surface Standard - Pendant Optional
Special Orders- Requirements
Wiring Hub: 20 Foot Cord with EP Plug
Contact us for special requirements
Warranty: YES- 5 Years*
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like orders until the product
is returned. This means, we will charge the customer for the product
total and credit back the difference once the fixture is returned. Weekly
and Monthly terms are available. Customer must pay shipping to and
from the destination. Please contact us Toll Free: at 1-800-369-6671
or (903) 498-3363 for further information if required.
Rental prices for the RNT-EPL-48-100LED-20C;
Monthly...336.67 USD
Weekly...252.50 USD
Scroll Down to Rent-
02/09/2015
Page: 184
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 185
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 186
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
180 Watt LED Lights on Telescoping Tripod - 14,400 Lumen - DC Power via Cig Plug - RENTAL
Part #: RNT-WALTP-2x90
Price: $1,800.00
02/09/2015
Page: 187
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
This unit is for rentals
The Larson Electronics RNT-WALTP-2x90 Tripod Mounted Dual LED Light consists of two 90 watt LED light heads mounted atop an
aluminum tripod and produces 14,400 lumens that can illuminate an area 1800'L x 375'W in flood mode. The heavy duty aluminum
tripod mount provides the ability to easily and quickly deploy these lights and extend them to any height between 3 and 10 feet, and an
included 16 foot coil cord with cigarette plug allows direct connection to vehicles and equipment.
*PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS, LIGHT TOWERS, OR QUADPODS*
This dual LED light tripod contains two LED light heads that produce 7,200 lumens each while using 90 watts at 7.5 amps, for a combined total
of 14,400 lumens at 180 watts and 15 amps. Each LED light head contains nine Seoul Z-Power 10 watt LEDs producing 900 lumens each
combined with high purity optics to produce an intense and powerful light beam. These LED lights are waterproof and have IP68 rated
construction that is designed to withstand demanding environmental and operating conditions.
These units can withstand frigid temperatures, are waterproof to three meters, and resist the ingress of dust, dirt and humidity. The housings on
these units are formed from cast aluminum and the lenses are unbreakable polycarbonate. The Seoul Z-Power LEDs offer resistance to shocks
and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use. Both LED fixtures are mounted to a single removable
mounting bracket that can be easily detached from the tower for stowing or transport.
The heavy duty aluminum tripod is durable, lightweight and adjustable to any length between 3 feet and 10 feet. A single mounting bracket holds
the LED lights and allows each light to be adjusted and aimed independently of the other. This adjustability allows users to expand the area
covered or to focus more intense coverage on a smaller area. The tripod legs can be collapsed and the light head bracket removed with the lights
still on it for simple portability and deployment. The heavy duty construction of this tripod and the light weight of the aluminum LED fixtures results
in a portable yet very stable lighting platform that will hold its position, even in very windy conditions.
Durability: The RNT-WALTP-2x90 Tripod Mounted Dual LED Light incorporates two IP68 rated LED light emitters on a collapsible aluminum
tripod. These weatherproof LED lights have a durable powder coat finish, are IP68 rated waterproof to 3 meters, sealed against intrusion by dust
and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The tripod weighs 8 pounds
and the 2 light heads and attachment bracket weigh 12 pounds. The adjustable tripod is constructed of heavy duty aluminum and provides
secure height adjustment, leg positioning, and light mounting that will hold position even in windy conditions.
Mounting: The LED light heads on this unit are mounted to a single removable bracket that allows the user to simply remove the entire light
assembly from the tripod for easy stowing and transport. Each LED light can be adjusted independently of the other to provide maximum
coverage or maximum intensity. Together, the LED lights can cover an area 3000'L x 175'W in spot mode and 1800'L x 375'W in flood mode.
Power: These LED tower lights are equipped with a 16 foot cord and cigarette plug. The cigarette plug can be plugged directly into a vehicle or
equipment with a cigarette plug socket. You do not need to anything special to operate these light bars in their multi-voltage 9-32 Volt
configuration. They will sense the incoming voltage and adapt accordingly.
Versatility: The easy deployment and multi-voltage capability of this light tower makes it ideal for rapid deployment as a scene light for first
responders to downed lines, main breaks or accidents. Hunters will find value in this LED light configuration for feeder light applications. Other
applications include temporary maintenance operations, tank cleaning, power washing and other maintenance applications where general area
lighting is not available. Temporary event organizers will find value in these telescoping LED lights for general area lighting in outdoor arenas
where temporary power distribution is unavailable or expensive.
Unlike our larger metal halide towers, these LED lights can be positioned next to the users. While our larger WAL-C-2XM 2000 watt metal halide
lights on telescoping tripods cover more area, they are typically paired with large portable electrical distribution panels, transformers or diesel
generators. The noise, fumes and high wattage electrical cabling usually requires that the operator positions the portable light tower at some
distance from the work area or event. While these LED light towers produce less light coverage than the large metal halide lights, they can be
placed right next to the work area, event or operators, so the overall effective illumination will be greater.
02/09/2015
Page: 188
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-WALTP-2x90 LED Light Tower
LEDTH-24X2E Features
Lamp Type: 2X LED Light Bars
IP68 Rated Weatherproof & Waterproof
Dimensions: Telescoping- 3' to 10'
Adjustable Tripod Extends 3' to 10'
Total Watts: 180
Multiple Power Options
Lumens: 14,400
Low Amp Draw
Voltage: Multi-Voltage- 9-32VDC
Long 50,000 Hour LED Life
Amps: 15 on 12 VDC -6.5 on 24VDC
Mounting: Heavy Duty Aluminum Telescoping Light Tower
Lighting Configuration: 10° Spot or 35° Flood
LED Light Color: 6000K
LED Life Expectancy: 50,000 Hours
Special Orders- Requirements
Wiring: 16 Foot Coil Cord with Cigarette Plug
Contact us for special requirements
Unit Weight: 20 lbs.
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
CE Certified
3 year warranty replacement on this LED light. After 30 days, the
customer ships the failed LED light and/or LED bulb to Larson
Electronics’ Larson Electronics at their expense. If the failure is a
manufacturer defect, we will ship a new replacement to the customer. If
failure occurs within 30 days of receipt, Larson Electronics will provide
a return label via email to the customer. When the failed light is
returned, Larson Electronics will ship a new replacement.
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental prices for the RNT-WALTP-2X90;
Monthly...$316.00 USD
Weekly...$190.00 USD
Scroll Down to Purchase-
02/09/2015
Page: 189
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof 50' Extension Cord w/ 30 Amp Continuous Service - Extra Exp. Proof Plug - RENTAL
Part #: RNT-EPEXC-50-30A-P
Price: $1,785.00
Made in USA
This Unit is for Rentals
Larson Electronics 30 Amp, Continuous Service, 50' Explosion Proof Extension Cord Rated Class 1 Division 1- Groups C & D and
Class 2 Division 1 Groups E, F, & G.
The Larson Electronics RNT-EPEXC-50-30A-P Explosion Proof extension cord allows operators to safely extend the range of their explosion
proof light or equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 50 feet of 12/3 SOOW
explosion proof cord rated at 30 amps of continuous service. The cord is chemical and abrasion resistant and comes with an explosion proof, 30
amp receptacle installed on one end and an explosion proof 30 amp plug installed on the other end. We also include an extra matching 30 amp
plug for operators to attach to their equipment which allows them to avoid any issues with plug/receptacle-equipment compatibility with this cord.
The plug on this cord can only be used in pin and sleeve style receptacles and will not work in standard electrical outlets.
The plugs on these units are of a sliding lock design. In order for a secure and working connection to take place, the operator must first slide the
plug into the receptacle to the first stop, slide the locking mechanism to the right, then fully insert the plug until it locks into place. This ensures a
safe seal is made and that the plug cannot be accidentaly pulled free from the receptacle. To ensure the highest safety, operators should make
connections outside of the hazardous area.
The receptacle contacts are deep recessed to avoid accidental contact and contain brass contacts designed to exert constant pressure to ensure
a secure connection. Ordinary location plugs will NOT activate this cord's explosion proof receptacle.
02/09/2015
Page: 190
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
RNT-EPEXC-50-30A-P Plug
RNT-EPEXC-50-30A-P Receptacle
Click Photo to Enlarge
Click Photo to Enlarge
Inter-Compatibility: These cords use Pin and Sleeve plugs and are cross-interchangeable with Crouse Hind™ Arktight series plugs and
receptacles part# CES2214 and Hubble-Killiark part# KRJ-304 KR Series plugs and receptacles. Any equipment requiring these C-H or H-B
plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we have made every
effort to ensure cross compatibility correctness.
Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations
Where Combustible Dust is Present.
02/09/2015
Page: 191
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPEXC-50-30A-P Explosion Proof Extension Cord
Plug / Outlet Certifications
Amp Rating: 30 amp Continuous Service
Class 1 Div 1 & 2 Groups C and D
Dimensions: Cord length-50 Feet Plug-8.44"-L 3.06"-W
Class 2 Div 1 Groups E, F and G
Configuration: 4 Pole 3 Wire
Suitable Plug Cable Diameter: .390-1.375”
Receptacle Specs:
Configuration: 4 Pole 3 Wire
Materials: Copper Free Aluminum/Malleable Iron
Dimensions: 4.69"-W X 4.94"-D X 8.31"-H
Mating Plugs: ****EPP-30A****
Special Orders- Requirements
Grounding: Shell and Extra Pole
Contact us for special requirements
Seals: Factory Sealed- No External Seals Needed
Toll Free: 1-800-369-6671
Finish: Epoxy Powder Coat
Fax: 1-903-498-3364
U.L. Certification
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-EPEXC-50-30A-P
Monthly...$342.00 USD
Weekly...$205.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 192
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Light Rental - 70 Watt Metal Halide - Waterproof -Base Stand - 100' Cord - RENTAL
Part #: RNT-EPL-BS-70-100
Price: $1,736.00
window.history.back();
02/09/2015
Page: 193
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
02/09/2015
Page: 194
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
RENTAL Explosion Proof Fluorescent Lights for Paint Booths - 4 foot - 4 lamp RENTAL
Part #: RNT-EPL-48-4L
Price: $1,536.00
Made in the USA
This Unit Is For Rentals
The Larson Electronics RNT-EPL-48-4L Explosion Proof Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 1,
Class 1 Division 2 and ideal for hazardous locations where flammable petrochemical vapor or combustible dust exists or has the
potential to exist. The unit has a T6 temperature rating and is approved for paint spray booths.
The RNT-EPL-48-4L is our 4 foot long, 4 lamp, UL listed Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light which is
also approved for use in paint spray booth applications. This T6 temperature rated fixture comes standard with four fluorescent lamps. This
fixture is multi-voltage capable with 347 Volt and 480 Volt versions available upon request. The RNT-EPL-48-4L provides operators in hazardous
locations with a powerful and affordable lighting solution that provides the best explosion proof protection available without sacrificing fixture
durability.
Click Here to Enlarge
Click Here to Enlarge
02/09/2015
Click Here to Enlarge
Page: 195
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
NOTE ON LAMPS: We offer a choice of bulbs with all of our explosion proof fluorescent fixtures. However, we standardize on the T-5HO bulbs
mostly for longevity and high output. However, many of our customers, including Naval bases, shipyards, oil rigs and petrochemical processing
plants operate in very cold conditions, and T-12HO bulbs operate well in those environments. The T12VHO, 110 watt Very High Output lamps
make this fixture an ideal replacement for 400 watt metal halide surface mount fixtures in hazardous location areas requiring Class 1 Division 1
rated lights. *However, the 110 watt T12VHO lamp configuration is not appropriate for paint spray booth applications.
Mounting options: Standard surface mounting via our L-brackets attached to Unistruts. Pendant mounting is available for greater distancing of
the fixture from the mounting surface (upon request) The Unistrut is attached to our standard L-bracket mounts. These L-bracket mounts can be
adjusted to create angle mounts. As illustrated in the photos above, the series of mounting holes at the top of the bracket enable this explosion
proof light to be attached to any wall, ceiling or floor surface. A simple through bolt can be used to secure the light to the surface. A single
junction box at one end of the light is provided for the electrical connection.
Suggested Applications: Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing
plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.
Made in USA Quality
Lamp Options
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture, where other models may only offer one
or three choices.
3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.
4. Over-sized, finned ballast housing for 800 mA fixtures provides more
heat dissipation and extends ballast life. Larger ballast box
accommodates High Output lamp ballasts. Ballast housing easily
accessible and externally mounted. Top and bottom covers secured
with nuts and bolts, instead of threaded through holes, which can be
damaged with dirt.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture,
while other models require the “tap and knock off” method to loosen the
end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp
protection.
8. Spring loaded sockets on both ends hold lamps firmly for maximum
shock and vibration protection.
02/09/2015
F54T5HO-850 – 54 watt, 5000 lumens per bulb, 20,000 hour life, 5000
Kelvin color (Suffix –T5)
F48T12HO-CW – 60 watt, 4050 lumens per bulb, 12,000 hours life,
4100 Kelvin color (Suffix –T12HO)
F32T8-841 – 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100
Kelvin color (Suffix –T8)
T12HO with magnetic ballast for high heat configurations (hot box
explosion proof light applications) - 60 watt, 4050 lumens per bulbs This bulb, ballast and wiring configuration is designed for application to
165 degrees C.
F48-T12-D-HO – 60 watt, 4050 lumens per bulb, 12,000 hours life,
5100 Kelvin color (76 CRI - Color Rendition) - This specialty lamp is
designed to mimic daylight conditions. For paint spray booth operators
requiring a brighter color light than a traditional "cool white", this bulb
can be useful. (Suffix –T12DHO)
F-48-T12-VHO – 110 watt, 7000 lumens per bulb, 12,000 hours life,
4200 Kelvin color (Suffix –T12VHO) NOTE: the 110 watt lamps raise
the temperature rating from T5 to T6, which is NOT appropriate for
paint spray booth applications. The fixture is still Class 1 Division 1
rated, however, this fixture is no longer paint spray booth certified with
the 110 watt Very High Output lamp.
Page: 196
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-48-4L Explosion Proof
U.L. Ratings
UL Listing: United States - Canada
Class 1 Div 1 & 2, Groups C & D
Dimensions: W-24.90" L-57.76" H-9.70"
Class 1 Div 2, Group A,B,C,D
Weight: 130 Lbs
UL 595 Outdoor Marine Type (Saltwater)
Total Watts: 216 watts*
UL 844, 924
Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz: 347
Volts and 480 Volts available upon request.
UL 1598 Marine Type
Total Lumens: STD-T5-HO Bulbs 19,080
Class 2 Division 1- 2, Groups E,F,G
Lamp Life Expectancy: STD-T5-HO Bulbs 20,000 Hours
UL Certified Canadian Standards
Efficiency: STD-T5-HO Bulbs90 Lumens per Watt
UL listed for Paint Spray Booths*
Ambient Operating Temp Range: -30 to 70 C
California Title 24 Compliant
Minimum Operating Temp: -30 C
Maximum Case Temp: 90 C
Special Orders- Requirements
Operating Temp Rating: T6 Rated
Contact us for special requirements
Wiring Hub: 1/2 inch threaded
Phone: 1-214-616-6180
U.L Approval: U.S Certificate Canada Certificate
Toll Free: 1-800-369-6671
Color Temp: 5000-T5-HO Bulbs
Fax: 1-903-498-3364
Mounting: Unistruts - Pendant Mounts Optional
E-mail: [email protected]
Wiring Hub: 1/2 inch threaded
U.L Approval: U.S Certificate Canada Certificate
View a Photometric Graph of the EPL-48-4L Bulb Types
*Substitution of included standard bulbs for higher output lamps may affect paint spray booth approval.
*Wattage totals are lamps only and may vary with different lamps.
*Temperatures above 65 degrees C will diminish ballast life from 5 years to 3 years)
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information
if required.
Rental Prices for the RNT-EPL-48-4L;
Monthly...$497.50 USD
Weekly...$331.67 USD
Scroll Down to Rent-
Links (Click on the below items to view):
- Dimensional Drawing
02/09/2015
Page: 197
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof 100 Foot Extension Cord with Inline Switch - 15 amp continuous service - RENTAL
Part #: RNT-EPEXC-100-ILS
Price: $1,398.50
Larson Electronics RNT-EPEXC-100-ILS 100' Explosion Proof Extension Cord With Inline Switch
This unit is for RENTALS
The Larson Electronics EPEXC-100-ILS Explosion Proof extension cord with inline switch allows operators to safely extend the range of their
explosion proof light or equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 100 feet of 14/3
SOOW explosion proof cord and are rated at 15 amps of continuous service. The cord is chemical and abrasion resistant and comes with a
Class 1 Division 1 explosion proof receptacle and switch installed on one end and a Class 1 Division 1 explosion proof plug installed on the other
end. We also include an extra matching plug for operators to attach to their equipment which allows them to avoid any issues with plug and
receptacle equipment compatibility with this cord.
Click Photo to Enlarge
Click Photo to Enlarge
The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug
and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. This unit includes an
inline switch which allows operators to leave the cords plugged in and switch equipment on or off within the hazardous work area. This switch
also allows operators to safely connect and disconnect equipment downline of the switch simply by turning off the switch before changing
connections. This feature allows operators to change connections without having to leave the hazardous workspace to do so.
02/09/2015
Page: 198
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Inter-Compatibility: These cords will work with non-explosion proof standard receptacles (NEMA 5-15R, 5-20R, or 6-20R). The included plugs
and receptacle are cross-interchangeable with Crouse Hind™ part# ENPENP5151 plugs and receptacles and Hubble-Killiark part# UGP-15231
ACCEPTOR® plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible
manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness.
Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations
Where Combustible Dust is Present.
Specifications / Additional Information
RNT-EPEXC-100 Explosion Proof Extension Cord
Plug / Outlet Certifications
Amp Rating: 15 amp Continuous Service
Class 1 Div 1 Groups C and D
Dimensions: Cord length-100 Feet Plug-2.78"-L 1.75"-W
Class 2 Div 1 Groups E, F and G
Configuration: 3 Pole 2 Wire
Suitable Plug Cable Diameter: .538” to .639”
Receptacle Specs:
Configuration: 3 Pole 2 Wire
Materials: Copper Free Aluminum
Dimensions: 3"-W X 5.69"-D X6.13"-H
Mating Plugs: ****EPP-15A, EPP-20-A****
Special Orders- Requirements
Finish: Epoxy Powder Coat
Contact us for special requirements
Toll Free: 1-800-369-6671
Switch Specs:
Fax: 1-903-498-3364
Configuration: Front Mounted Switch
E-mail: [email protected]
Materials: Malleable Iron - Copper Free Aluminum
Dimensions: 3"-W X 4.69"-D X 5.38"-H
Finish: Triple-Coat—(1) zinc electroplate, (2) chromate, (3) epoxy
powder coat
U.L. Certification
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental prices for the RNT-EPEXC-100-ILS;
Monthly...185.50 .00 USD
Weekly...111.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 199
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof LED Light - 30 Watt LED - Quadpod Mount - 100' SOOW Cord - RENTAL
Part #: RNT-EPL-PM-1x30LED-TP1-100
Price: $1,380.34
Made in the USA
The Larson Electronics RNT-EPL-PM-1x30LED-TP1-100 Quadpod Mounted Explosion Proof LED Light is U.L.
approved Class 1- Groups C and D and is rated for use in wet and marine environments. The quadpod mount and
Par38 lamp used with this unit provides operators with excellent power and efficiency coupled with high versatility
and ease of use.
This explosion proof LED light is mounted on our non-sparking collapsible quadpod, giving operators an easily deployable
source of powerful light that can be quickly setup and adjusted to effectively illuminate hazardous work areas, then easily
stowed and transported between uses. This unit uses a 30 watt Par38 LED lamp that produces 53,500 Lux at the lens and
1,980 Lux at 1 meter. The Par38 LED lamp produces more light than a typical 300 watt incandescent bulb while drawing
only 30 watts and a tenth of the amps. The light produced has a 5500 Kelvin color which is bright white compared to typical
incandescent or halogen lamps and results in more effective color rendering and contrast.
The LED lamp runs at a cool 55 degrees Fahrenheit compared to the 198 degree average of a 300 watt incandescent,
resulting in an easier to handle unit and less heat in the workspace. This unit's durability, easy deployment, high power and
good color rendering make it ideal for first responders and emergency services.
02/09/2015
Page: 200
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
The non sparking collapsible quadpod weighs only 15 pounds and can be extended to 12 feet and collapsed to 52 inches.
Both the shaft and legs of the non-sparking tripod are collapsible. The quadpod can be easily detached from the light aiding
in deployment, storage and transport. The tripod affords operators the ability to quickly and securely elevate this lamp,
increasing its effective coverage of the work area. The lamp can be easily adjusted up, down or from side to side and
locked into position.
The lamp housing is waterproof and constructed of thick copper free aluminum alloy, making it ideal for use in wet and
marine environments. The Par38 LED lamp provides 3,800 square feet of coverage with 2,200 lumens of bright white light
at 5500 Kelvin, producing good color rendering and object contrast.
The LEDs in this unit are highly resistant to damage from shocks or impacts, greatly reducing the chances of damage
should the tower be knocked over, unlike incandescent lamps which may break or shatter. The LED lamp is rated at 50,000
hours of life providing up to ten years of regular service. This lamp is available in 120 volt 50/60 hz, 220/240 volt 50/60 hz,
and 12 volt DC or 24 volt DC versions.
12VDC or 24VDC versions have no transformer and run directly off of DC current. Please see the EPL-PM-1X30LED120X12I-100 for a 12 volt explosion proof light that operates off of 120 volts or 240 volts with inline step down transformer.
100 feet of SOOW cord ending in an ECP1523 plug is included with this light.
Made in USA Quality
Superior LED Benefits
1. 1,980 lumens and 5500 K light color produces over 3,ooo square feet of
coverage, good color rendering and object contrast.
2. Fixture arrives assembled and lamped. Adjustable and can be locked
into the desired position.
3. Unit is waterproof and constructed of thick corrosion resistant copper free
aluminum alloy.
4. No ballast on this light.
5. 30 watt Par38 LED lamp resists damage from impacts, runs cooler and
has a 50,000 hour rated service life.
6. Non sparking Quadpod is adjustable from 52 inches to 12 feet, weighs 15
pounds and can be removed from the lamp for easy stowing and transport.
7. Explosion proof, impact resistant and ideal for use in wet and marine
environments.
1. 50,000 hour lifespan.
2. Can SAVE 50% or more on energy.
3. Less frequent outages, higher output improves workplace safety.
4. Reduces energy use and creates less heat.
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Bright, even light maintains consistent color over time.
9. Instant on/off – No flickering, delays or buzzing
10. Very good color rendering.
11. Vibration/impact resistant.
02/09/2015
Page: 201
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-PM-1x30LED-TP1-100 Tripod Mounted
U.L. Ratings
UL Listing: United States
Class 1 Groups C and D
Dimensions Lamp Only: W-12" L-13 3/16" H-16 3/4"
Outdoor Marine Wet Area
Weight: 51 Lbs including quadpod
ECP1523 Hazardous Location Plug
Total Watts: 30 watts
UL Certified- U.S.
Voltage: 120V-60hz 220V-50hz 240V-60hz
Low Voltage (Optional): 12-24V DC
on 120-277V, 1700 on 12-24V
Lumens: 2200
LED Lamp Life Expectancy: 50,000 Hours
Efficiency: 66 Lumens per Watt
Operating Temp Range: T3C rated
Beam Angle: N/A
Special Orders- Requirements
Color Temp: 5500K-
Contact us for special requirements
Mounting: Non Sparking Extendible Quadpod
Toll Free: 1-800-369-6671
Wiring: 100 ft SOOW Cord ECP1523 plug
Intl: 1-903-498-3363
Warranty: YES- 3 Years*
E-mail: [email protected]
U.L Approval: U.S Certificate
*3 year warranty replacement on this LED light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships the
failed LED light and/or LED bulb to Larson Electronics at their expense. If
the failure is a manufacturer defect, we will ship a new replacement to the
customer. If failure occurs within 30 days of receipt, Larson Electronics will
provide a return label via email to the customer. When the failed light is
returned, Larson Electronics will ship a new replacement.
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is
returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned.
Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further
information if required.
Rental prices for the RNT-EPL-PM-1x30LED-TP1-100 ;
Monthly...$240.00 USD
Weekly...$145.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their
rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if
needed.
Scroll Down to Purchase- Same Day Shipping Available
02/09/2015
Page: 202
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 203
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof 250 Watt Incandescent Light on Quadpod - 100' SOOW Cord - Extends 4.5 - 8' - RENTAL
Part #: RNT-EPL-PM-1x300-TP1-100
Price: $1,380.34
02/09/2015
Page: 204
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
This unit is for rentals
The Larson Electronics RNT-EPL-PM-1x300-TP1-100 Quadpod Mounted 300 Watt Explosion Proof Incandescent Light is U.L. approved
Class 1- Groups C and D and is rated for use in wet and marine environments. The quadpod mount and Par38 lamp used with this unit
provides operators with excellent power and efficiency coupled with high versatility and ease of use.
This explosion proof incandescent light is mounted on our non-sparking collapsible quadpod, giving operators an easily deployable source of
powerful light that can be quickly setup and adjusted to effectively illuminate hazardous work areas, then easily stowed and transported between
uses. This unit's durability, easy deployment, high power and good color rendering make it ideal for first responders and emergency services.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
The non sparking collapsible quadpod weighs only 23 pounds and can be extended to 12 feet and collapsed to 4.5 feet. Both the shaft and legs
of the non-sparking quadpod are collapsible. The quadpod can be easily detached from the light aiding in deployment, storage and transport. The
quadpod affords operators the ability to quickly and securely elevate this lamp, increasing its effective coverage of the work area. The lamp can
be easily adjusted up, down or from side to side and locked into position. The lamp housing is waterproof and constructed of thick copper free
aluminum alloy, making it ideal for use in wet and marine environments.
This lamp is available in 120 volt 50/60 hz. We offer low voltage solutions for those that need as well, please see the EPL-PM-1X30LED-120X12I
-100 for a 12 volt explosion proof light that operates off of 120 volts or 240 volts with inline step down transformer. 100 feet of SOOW cord ending
in an ECP1523 plug is included with this light.
Made in USA Quality
1. Light output offers 3030 lumens that covers approx. 3000 feet squared. 250 Watt Bulb.
2. Fixture arrives assembled and lamped. Adjustable and can be locked into the desired position.
3. Unit is waterproof and constructed of thick corrosion resistant copper free aluminum alloy.
4. Non sparking quadpod is adjustable from 4.5 to 12 feet, weighs only 23 pounds and can be removed from the lamp for easy stowing and
transport..
5. Explosion proof, impact resistant and ideal for use in wet and marine environments.
02/09/2015
Page: 205
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-PM-1x300-TP1-100 Quadpod Mounted
U.L. Ratings
UL Listing: United States
Class 1 Groups C and D
Dimensions Lamp Only: W-12" L-13 3/16" H-16 3/4"
Outdoor Marine Wet Area
Total Lumens: 3030
ECP1523 Hazardous Location Plug
Total Watts: 300 watts
UL Certified- U.S.
Voltage: 120V-60hz
Lamp Life Expectancy: 600 Hours
Operating Temp Range: T3C rated
Weight: 52 Lbs including Quadpod
Special Orders- Requirements
Mounting: Non Sparking Extendible Quadpod
Contact us for special requirements
Wiring: 100 ft SOOW Cord ECP1523 plug
Toll Free:1-800-369-6671
Warranty: YES- 2 Years
Intl:1-903-498-3363
U.L Approval: U.S Certificate
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-EPL-PM-1x300-TP1-100 ;
Monthly...$340.50 USD
Weekly...$225.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase- Same Day Shipping Available
02/09/2015
Page: 206
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 207
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 208
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Hazardous Area Light - Pedestal Stand - 1 X 400 Watt Metal Light - Class 1 Div 2 RENTAL
Part #: RNT-EPL-PM-1X400MH-100
Price: $1,365.00
Made in the USA
This Unit Is For Rentals
The Larson Electronics RNT-EPL-PM-1X400MH-100 Pedestal Mounted Hazardous Area Light includes a single metal halide lamps
capable of illuminating an area 25,000 square feet in size and is rated Class 1 Division 2 Groups A, B, C and D as well as wet area and
marine environment suitable.
The RNT-EPL-PM-1X400MH-100 pedestal mounted hazardous area light provides operators in hazardous locations with a versatile lighting
solution for operations where easily managed large scale illumination of the workspace is required. One 400 watt metal halide lamp provides light
coverage for 25,000 square feet of work area while a Class 1 Division 2 Groups A, B, C and D U.L. approval assures reliable protection against
inadvertent ignitions.
This hazardous area light package is designed to provide operators i hazardous locations with an easily deployed and highly stable U.L.
approved lighting platform. Included with this unit is a 400 watt metal halide lamp and 100 feet of abrasive and oil resistant SOOW cord
terminating in an ECP 1523 5-15P Class 1 Division 1 explosion proof straight blade plug. The metal halide lamp is mounted to a metal pedestal
platform with an adjustable trunnion bracket that provides vertical adjustability. A single carrying handle is included to provide easy carrying and
movement of the unit from one location to another.
The lamp housing is weatherproof and constructed of die cast aluminum featuring a hinged, removable front-access door with two captive
closure screws for easy servicing. The optical assembly includes a precision-formed aluminum reflector and heat/impact-resistant tempered flat
door glass. The aluminum reflector has a chemically bonded, lightweight, non-breakable ALGLAS® finish on both the inside and outside surfaces
providing corrosion resistance, durability and ease of cleaning. The optical assembly contains a mogul base socket capable of handling the
higher pulse ratings of newer HID systems.
This lamp is suitable for use in areas where flammable petrochemical vapors are sometimes present in a non-confined, open air work space and
IS NOT suitable for use in confined spaces. This light is highly durable, produces high light output in a wide flood pattern, and operates effectively
at temperatures to -20 degrees F. This metal halide pedestal mounted light is rated for use in wet areas and marine environments and can be
configured to operate with 120-277V, 480V, and 220-50hz VAC. Choose your desired voltage configuration below when ordering.
02/09/2015
Page: 209
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-PM-1X400MH-100
U.L Ratings
Lamp Type: Metal Halide
U.L Rated for Wet Area Use
Lumens: 36,000 Total
Class 1 Division 2 Groups A, B, C and D
Total Watts: 400
U.L Approved Marine Environments
Watts Per Lamp: 400
Not Suitable for Confined Spaces
Voltage: 120-277/60Hz, 480, 220/50Hz
Lighting Configuration: Flood Pattern
Mounting: Pedestal Stand w/ Handle
Weight: 105lbs
U.L. Listing: Wet Area / Marine Environment Approved
Total Coverage: 50,000 Sq. Feet
Special Orders- Requirements
Wiring: 100 Feet SOOW Abrasive Oil Resistant Cord.
Contact us for special requirements
Beam Lux: 17000@ 1 Meter 2500@ 3 Meters
Phone: 1-214-616-6180
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
YOU CAN RENT THIS UNIT. Contact 1-800-369-6671 to make
arrangements.
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental prices for the RNT-EPL-BS-70-100;
Monthly...$1365.00 USD
Weekly...$682.50 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental
period. When returned, deductions will also be made for shipping,
repairs, and excessive cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 210
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 211
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
RENTAL Explosion Proof 400 Watt Class 1 Division 2 Light on Adjustable Aluminum Ladder or Rail Mou
Part #: RNT-HAL-JH400-120
Price: $1,184.65
Made in the USA
THIS UNIT IS FOR RENTALS
The RNT-HAL-JH400-120 metal halide hazardous area light fixture from Larson Electronics produces 36,000 lumens of light capable of
illuminating an area 18,000 square feet in size. Weather proof and U.L. listed for marine use, this metal halide fixture comes attached to
an aluminum rail/ladder mount bracket that allows operators to easily mount this unit to ladders, handrails, catwalks and other similar
structures.
The versatile RNT-HAL-JH400-120 bracket mounted metal halide fixture from Larson Electronics is weatherproof and comes with an adjustable
aluminum ladder/bracket mount that makes it ideal for use in industrial applications, maintenance, cleaning and servicing duties, large open
space hazardous work areas and any Class 1 DIV 2 Groups A,B,C,D area where ladders, scaffolding and other railings provide opportunities for
mounting. The lamp housing is weatherproof and constructed of die cast aluminum featuring a hinged, removable front-access door with two
captive closure screws for easy servicing.
The optical assembly includes heat/impact-resistant tempered flat door glass with a cast aluminum frame. The aluminum rail/ladder bracket can
be adjusted from 26 inches to 43 inches to allow mounting to a wide variety of railings, scaffoldings or ladders.
02/09/2015
Page: 212
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
This hazardous area light is U.L. rated Class 1 Division 1 and 2, Groups A,B,C,D and UL1598 listed for outdoor salt water marine use. The
integral ballast is protected within the weatherproof housing and operates on 120VAC. This lamp is suitable for use in areas where flammable
petrochemical vapors are sometimes present. The multi-purpose design of this fixture makes it a popular choice for industrial applications
regardless of whether the locations are designated hazardous or not. The non sparking aluminum ladder bracket with adjustable J-hook bottom
enables operators to securely mount the light to any rail, ladder or scaffolding.
This light is highly durable and produces high light output in a wide flood pattern. The lamp is mounted to the aluminum bracket via an adjustable
coated steel trunnion that allows the operator to adjust the lamp both vertically and horizontally through 90 degrees of tilt and 360 degrees of
pivot rotation. All hardware on this unit is non sparking/corrosion resistant and the die-cast aluminum exterior has a dark bronze, polyester
powder paint finish. 100 feet of SOOW abrasive and oil resistant cord with an ECPL1523 5-15P Class 1 Division 1 explosion proof straight blade
plug is included for easy and safe connection to power sources.
Suggested applications: catwalks, ship rails, etc. making this explosion proof light useful in ship yards, boat yards, plants, tanks, vessels, fuel
cells, barge repair and oil field applications.
Please contact us at [email protected] or 1-800-369-6671 for custom configurations with this ladder/rail mounting option. For
example, we offer 2 light configurations and solutions with one or two water proof Class 1, Division 1 lights.
Made in the USA Quality
Metal Halide Benefits
1. High Efficiency Metal Halide lamp.
2. 90 Lumens per Watt
3. Rugged Die Cast Aluminum Lamp Housing.
4. Hinged Lens Door - Shock Resistant Tempered Glass.
5. Heavy Duty Door Gasket.
6. Socket: Mogul Base.
7. Low Maintenance.
8. Adjustable Trunnion Bracket Mount- Corrosion Resistant.
9. Polyester Powder Dark Bronze Paint Finish.
10. UL Approved for Marine Environments.
02/09/2015
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering.
5. Vibration and shock resistant.
6. Low maintenance.
Page: 213
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-HAL-JH400-120 Metal Halide
U.L Ratings
Lamp Type: Metal Halide
Class 1 Division 2 -Groups A,B,C,D
Lamp Dimensions: 10.75 "-Depth, 12.75"-H, 14 "W
UL1598 Salt Water Marine Use
Bracket Dimensions: Adjustable from 26" to 43"
UL 844
Watts: 400
T1 Temperature Rating
Lumens Per Watt: 90
Voltage: 120VAC
Lighting Configuration: Flood Pattern
Mounting: Lamp mounted to Aluminum Ladder Bracket
Lamp Weight: 35lbs
U.L. Listing: Class1 DIV2 Groups ABCD
Special Orders- Requirements
Total Lumens: 36,000
Contact us for special requirements
Wiring: 3/4 inch NPT at Wiring Box
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental Prices
Monthly...$250 USD
Weekly...$75 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Purchase- Same Day Shipping Available!
02/09/2015
Page: 214
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 215
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
02/09/2015
Page: 216
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof LED Light - Inline Transformer 120V/12V - 30W LED - Class I, Groups C + D - RENTAL
Part #: RNT-EPL-PM-1X30LED-120X12I-100
Price: $1,154.30
Made in the USA
THIS UNIT IS FOR RENTALS
The RNT-EPL-PM-1X30LED-120X12I-100 Explosion Proof LED Light with booted inline transformer is U.L. approved Class 1 Groups C
and D, and is rated for use in wet and marine environments. The waterproof construction and LED lamp used with this unit provides
operators with excellent power and light quality coupled with high versatility and excellent durability.
The RNT-EPL-PM-1X30LED-120X12I-100 Pedestal Mounted Explosion Proof Light with booted inline transformer provides 1,500 square feet of
work area coverage with 2,200 lumens of light output. The 30 watt LED lamp in this unit produces more illumination than a 150 watt halogen
lamp, runs cooler, lasts far longer, and produces better color rendering and object contrast. This portable unit is waterproof and tested to 500
hours of salt spray exposure in accordance with MIL-F-8115C Military Specifications. An included inline transformer steps down standard
120VAC current to 12 Volts to provide a low voltage lighting solution for areas where low voltage operation is preferable.
53' container no illumination
EPL-PM-1X30LED-120X12I-100
Click Photo to Enlarge
With EPL-PM-1X30LED-120X12I-100
Click Photo to Enlarge
02/09/2015
Click Photo to Enlarge
Page: 217
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This portable explosion proof LED light fixture is comprised of a 30 watt LED equipped light head mounted atop a circular pedestal base. The
entire unit is fabricated from cast aluminum and is factory sealed and water tight. This unit requires no external seals, has a built in carrying
handle, and the light head can be adjusted through 135° of vertical movement. The yoke is formed of high strength aluminum alloy, the lens is
thermal shock and impact resistant glass, and the entire housing is formed of cast aluminum with an aluminum enamel coating.
The 30 watt LED lamp in this unit is a PAR38 design and produces more lumens than a 150 watt halogen lamp. At 5500k color, the light from this
unit is bright white in contrast to the yellowish hue of the standard halogen incandescent bulb. The operating temperature of this LED explosion
proof light is approximately 55 degrees Fahrenheit as compared to the 198 degrees operating temperature of the 300 watt incandescent version.
This makes the light easier to handle and move and doesn't create additional heat in smaller, confined spaces. Additionally, the LED lamp in this
unit has a far longer operational life at up to 50,000 hours as compared to the 600-100 hours for a standard halogen lamp. This greatly reduces
the costs associated with frequently replacing lamps and servicing.
Included with this unit is 100 feet of 16/3 SOOW (abrasive and oil resistant) cord with an inline 120VAC to 12 Volts inline transformer ending in
an ECP 1523 5-15P explosion proof straight blade plug connector. This light operates with standard 120 volts AC current and has a booted inline
transformer which steps it down to 12 Volts before it reaches the lamp.
This lamp is extremely rugged and ideal for use in marine environments where damage due to salt water spray and dampness is an issue.
Made in the USA Quality
1. Thick cast aluminum construction.
2. Thermal shock and impact resistant glass lens.
3. Aluminum alloy yoke.
4. High stability round pedestal base..
5. Factory sealed, no external seals required.
6. 500 hour salt-spray tested. Per MIL-F-8115C.
7. Low Maintenance.
8. LED lamp lasts longer, provides more light using less power, and creates less heat.
9. Explosion proof cord and plug included..
10. Included carrying handle.
02/09/2015
Page: 218
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-PM-1X30LED-120X12I-100
UL and CSA Certified
UL Listing: United States/Canada
Class 1 Groups C and D
Dimensions: 12"-Diam Base 16.75"-H 13.9"-Depth
UL Standard: UL 1598, UL 844
Weight: 28 Lbs
UL Listed: E10794
Total Watts: 30
500 hour salt-spray tested. Per MIL-F-8115C
Voltage: Standard 120V-50hz- Stepped Down to 12VDC Via
Transformer
Lamp Lumens: 2200 on 120-277V, 1700 on 12-24V
Lamp Type: PAR38 LED
Mounting: Aluminum Circular Pedestal Base
Wiring: 100 feet SOOW Cord ECP 1523 Explosion Proof Plug
Operating Temp Range: T3C Rated
Special Orders- Requirements
LED Lamp Life: 50,000 Hours
Contact us for special requirements
LED Color Temp: 5500K
Toll Free: 1-800-369-6671
LUX: @ Lens-53,500 @ 1 Meter-1,950
Intl: 1-903-498-3363
E-mail: [email protected]
This fixture is being remanufactured under file number E10794.
3 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the
failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to
the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed
light is returned, Larson Electronics will ship a new replacement.
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information
if required.
Rental Prices for the RNT-EPL-PM-1X30LED-120X12I-100;
Monthly...$397.00 USD
Weekly...$298.00 USD
1-2 Day Lead Time on This Light. Scroll Down to Purchase-
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
- STEP
- DXF
02/09/2015
Page: 219
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Intrinsically Safe Blower (Fan) - Runs off Air Compressor - Class I, II, & III - 25' Duct - RENTAL
Part #: RNT-EPF-30P
Price: $1,152.00
02/09/2015
Page: 220
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
This Unit is a Rental
The Larson Electronics RNT-EPF-30P Explosion Proof Ventilator Fan / Blower with 25 foot static conductive duct
safely and effectively redirects stale air from hazardous location areas. This explosion proof blower is unique due
to it is certification for all groups including groups A and B where only air driven blowers are normally certified for
these groups. UL and C-UL listed.
The RNT-EPF-30P Explosion Proof Ventilator Fan / Blower is designed for confined spaces that require a powerful
ventilator that meets strict hazardous space standards. This explosion proof fan/blower delivers high-performance with
uncompromising safety and is UL and C-UL listed for use in Class I, Groups A, B, C and D; Class II, Groups E, F and G;
and Class III hazardous locations. This fan is pneumatically powered, meaning this fan does not operate on electricity and
requires a compressor to operate.
Instead of being driven by an electrically powered motor, this fan connects to a compressor and operates on pressurized
air. This unit has a 3/8 connecting port for standard compressor lines and requires a compressor capable of producing a
steady 38 CFM flow at 100 PSI.
Note on Explosion Proof Fans:Can be used as an intake and an exhaust fan.
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Click Photo to Enlarge
Page: 221
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
AIR FLOW RATES
Free Air – 2063 CFM
15 foot straight duct – 1753 CFM
15 foot duct with 1 90 degree bend – 1616 CFM
15 foot duct with 2 90 degree bends – 1450 CFM
25 foot straight duct – 1619 CFM
25 foot duct with 1 90 degree bend – 1497 CFM
25 foot duct with 2 90 degree bends – 1433 CFM
Click Here for Information on the Composition of the EPF-30P
Housing.
Click Photo to Enlarge
This fan/blower unit has a CFM rating of 2,063, ensuring ample airflow and effective ventilation for larger jobs. This
intrinsically safe unit is incapable of sparking and features a fully enclosed high performance motor and 25 feet of static
conductive duct with an aluminum coupler for effective and efficient routing and movement of airflow.
Hazardous location areas require this fan to have a static conductive duct (12 inches X 25 feet) and aluminum coupler
which is included in this package. The duct consists of a single-ply polyester reinforced PVC vinyl fabric hose with an
extrernal wearstrip reinforced with a spring steel wire helix. It is lightweight for blower applications and highly compressible.
The retractability of the static conductive duct allows for convenient storage and easy transport in a fraction of its fully
extended length and has low friction loss. The wearstrip offers external abrasion resistance, and is listed as YL 94 V-0
flame retardant. Ambient operating temperatures for this unit range from -20 degrees to 180 degrees Farenheit.
02/09/2015
Page: 222
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPF-30P Explosion Proof Fan/Blower
UL and C-UL Listed
Air consumption: 38 cfm
Class I, Groups A, B, C and D
Inlet Pressure: (Max) – 100 psi
Class II, Groups E, F and G
Noise Level : 86 Dba
Class III Hazardous locations
Motor:
1.5 Horsepower
Bearings : Permanently Lubricated
RPM:
3000
Fan Type: Axial Blower/Extractor
Size:
Special Orders- Requirements
12" Diameter (305 mm)
Weight:
28 Lbs (12.7 kg)
Contact us for special requirements
Height:
21" (533 mm)
Toll Free: 1-800-369-6671
Length:
17" (432 mm)
Intl: 1-903-498-3364
Width : 14" (355 mm)
E-mail:
[email protected]
Rentals:In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders
until the product is returned. This means, we will charge the customer for the product total and credit back the difference
once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the
destination. Please contact us Toll Free: at 1-800-369-6671 or (903) 498-3363 for further information if required.
Rental prices for the EPF-30P;
Monthly...288.00 USD
Weekly...173.35 USD USD
Scroll Down to Order
02/09/2015
Page: 223
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- Manual
02/09/2015
Page: 224
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof LED Drop Light / Trouble Light - 10 Watt LED - 120V - 50' Cord Reel *RENTAL
Part #: RNT-EHL-LED-7W-GCR50
Price: $1,114.78
Made in the USA
THIS UNIT IS FOR RENTALS
The Larson Electronics RNT-EHL-LED-7W-GCR50 Explosion Proof LED Drop Light / Trouble Light is U.L. approved Class 1 Division 1 &
2 Groups C and D - and is ideal for general work activities in hazardous locations requiring explosion proof protection.
This 10 watt explosion proof LED work light from Larson Electronics produces 1050 lumens of bright white light and comes complete with 50 feet
of cable within a general use cord reel. The RNT-EHL-LED-7W-GCR50 LED drop light has no ballast and the housing is constructed of non
sparking aluminum which results in a very lightweight unit. This hazardous location hand lamp is Class 1, Division 1 and 2 and Class 2 Division 1
and 2 hazardous location environment approved. This explosion proof LED drop light is ideal for hazardous work areas where a ready source of
easily managed lighting is desired.
100 Watt Incandescent Bulb
Click Photos to Enlarge
With the EXP-LED-7W-25
Click Photos to Enlarge
02/09/2015
Click Photos to Enlarge
Page: 225
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This 10 watt LED drop light is suitable for use in areas where petrochemical vapors and various dusts are present and projects 1050 lumens of
light, which is twice the lumens per watt output of a 100 watt incandescent bulb. This unit is rated Class 1, Division 1 and comes complete with
50’ of SOW 16/3 AWG cable wound inside of the retractable cord reel and terminated in a 5-15 straight blade plug. The cord reel must be
installed outside of the classified location.
This hand lamp has a high efficiency LED bulb that requires no ballast, so the operator doesn't need to drag the ballast housing around. This can
be particularly annoying when the ballast becomes entangled in the cord. This explosion proof LED hand light operates on standard 120 Volts, 60
Hz for US voltages. The light produced by this unit has a 6000k color temperature, which is much sharper and whiter than the light produced by
incandescent lamps. The light produced by this lamp is ideal for close work and inspection activities where good contrast and true color
representation is needed. The LED lamp in this unit runs much cooler than incandescent or flourescent lamps, resulting in a lamp housing that
remains cool to the touch and eliminates the accidental burns often encountered with incandescent drop lights.
Made in USA Quality
Lamp Features
1. Federal Spec Cord.
2. Explosion Proof.
3. 10 Watt 1050 Lumen LED Lamp.
4. Rugged fabricated steel and cast aluminum construction.
5. Blue and Gray paint finish.
6. UL Class1 Div1 Class 2 Div1
7. 120 Volt Operation
8. SOOW cable.
9. Aluminum Hook for Convenient Placement.
10 watt LED light produces 1050 lumens
Non-sparking aluminum housing
50,000 hour LED Lamp
Molded rubber bumper guard
Annealed glass tube shields prevent shattering
Integrated lamp shock absorbers prevent drop damage
Swivel hook for hanging and hands free operation
02/09/2015
Page: 226
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EHL-LED-7W-GCR50
U.L. Ratings
UL Listing: United States
Class 1, Division 1 & 2 for Groups C, D
Dimensions (lamp): L-16.5 " Dia-5"
Class II, Division 1 and 2 for Groups F, G
Lumens: 1050
Total Watts: 10 watts
Voltage: Stnd-110/115/120VAC
Color Temp: 6000k
Special Orders- Requirements
Mounting: Aluminum Hook
Contact us for special requirements
Wiring: 50' 16/3 AWG SOW cord w/ Cord Reel
Toll Free: 1-800-369-6671
Lamp Type: LED
Intl: 1-903-498-3363
YOU CAN RENT THIS UNIT. CONTACT 1-800-369-6671.
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EHL-LED-7W-GCR50;
Monthly...$212.50 USD
Weekly...$159.38 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Purchase- Same Day Shipping on This Light!
02/09/2015
Page: 227
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Fluorescent Fixture w/ Emergency Ballast - 4', 2 Lamps - Class I, Div. I - RENTAL
Part #: RNT-EPL-EMG-48-2L
Price: $991.00
Made in the USA
The Larson Electronics RNT-EPL-EMG-48-2L Explosion Proof Emergency Lights & Fluorescent light Combination is U.S./Canada U.L.
approved Class 1 Division 1, Class 1 Division 2 and ideal for hazardous locations where flammable chemical/petrochemical vapors
exist or have the potential to exist.
This Unit is for Rentals
The RNT-EPL-EMG-48-2L is a 4 foot long, 2 lamp, UL listed Class 1 Division 1 and Class 2 Division 1and 2 explosion proof fluorescent light
which is equipped with an added battery backup providing 90 minutes of emergency runtime. This T6 temperature rated fixture comes standard
with two T-8 fluorescent lamps which produce a combined 5,900 lumens of light. This fixture is multi-voltage capable and provides operators in
hazardous locations with a reliable and durable lighting solution that provides explosion proof protection along with the security of an emergency
battery backup.
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Click Photo to Enlarge
Page: 228
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This fluorescent light works, mounts and is wired like our EPL-48-2L explosion proof fluorescent light fixtures. The main difference is that we
attach an extra Bodine ballast box to the unit that adds emergency light functionality to the fixture. This explosion proof emergency light will run
the standard 90 minutes after power is lost. The light recharges the battery once electrical power is restored. Standard configuration includes a
single emergency ballast that will run a single lamp at 900 lumens for 90 minutes. For an additional charge, a second ballast can be added to run
a second lamp for 1800 total lumens output for 90 minutes.
NOTE ON LAMPS: This unit comes equipped with an electronic ballast and F32-T8/841 bulbs which produce 2950 lumens per bulb and have a
rated lifespan of 24,000 hours.
Additional mounting options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown in the
photos above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or
conduit).
Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by
tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at
the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the
light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown
above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the
opposite end of the fluorescent light.
Made in USA Quality
Lamp Options
1. Each unit dialectically tested.
F32-T8/841 – 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100
2. Fixture arrives assembled and lamped to reduce installation time and Kelvin color (Suffix –T8)
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture, where other models may only offer one
or three choices.
3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.
4. Over-sized, finned ballast housing for 800 mA fixtures provides more
heat dissipation and extends ballast life. Larger ballast box
accommodates High Output lamp ballasts. Ballast housing easily
accessible and externally mounted. Top and bottom covers secured
with nuts and bolts, instead of threaded through holes, which can be
damaged with dirt.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture,
while other models require the “tap and knock off” method to loosen the
end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp
protection.
02/09/2015
Page: 229
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-EMG-48-2L Explosion Proof
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 1, Groups C and D
Dimensions: W-11.25" L-52" H-8.5 "
Class 1 Division 2, Group A,B,C,D
Weight: 65 Lbs
UL 595 Outdoor Marine Type (Saltwater)
Total Watts: 64 watts*
UL 844, 924
Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz
UL 1598 Marine Type
Total Lumens: F32-T8/841 Bulbs 5,900
Class II Division 1- 2, Groups E,F,G
Lamp Life Expectancy: F32-T8/841 Bulbs 24,000 Hours
UL Certified Canadian Standards
Efficiency: F32-T8/841 Bulbs N/A
UL listed for Paint Spray Booths*
Operating Temp Range: T6 Rated
Beam Angle: N/A
Special Orders- Requirements
Color Temp: 4100K-
Contact us for special requirements
Mounting: Bracket Standard - Pendant Optional
Phone: 1-214-616-6180
Wiring Hub: 1/2 inch threaded
Toll Free: 1-800-369-6671
U.L Approval: U.S Certificate Canada Certificate
Fax: 1-903-498-3364
E-mail: [email protected]
*Wattage totals are lamps only and may vary with different lamps.
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-EPL-EMG-48-2L;
Monthly...$162.00 USD
Weekly...$103.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase- Please note: 2 day lead time on this light.
02/09/2015
Page: 230
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 231
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- EASM
02/09/2015
Page: 232
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof LED Aluminum Drop Light - Class 1 Div 1 - 50' SOOW Cord *RENTAL*
Part #: RNT-EPL-FL1524-LED-50
Price: $980.63
Made in the USA
This unit is for rentals
The Larson Electronics RNT-EPL-FL1524-LED-50 Hazardous Area LED Work light is F.M. approved Class 1 Division 1 & 2. With a 2 foot
long 15 watt LED tube lamp, this hazardous location light provides better quality light than higher wattage incandescent lights and
more light than previous fluorescent lamp equipped models. This light is suitable for exposure to vapors and dusts and ideal for use in
paint spray booth inspections or as general portable lighting in confined spaces like fuel tanks or grain storage areas.
This 2 foot long, 15 watt, explosion proof LED work light from Larson Electronics.com comes complete with a 50 foot long explosion proof cord
for long range and convenient operation. This hazardous location area light features a rugged, non-sparking aluminum casing and unique rod
cage and produces cool, glare-free, shadowless light that improves safety in hazardous locations and maximizes lighting efficiency with built-in
metal reflectors.
These LED lights improve on the desirable qualities of similar fluorescent models with higher output and better light quality and are ideal for paint
booth applications, storage container inspections and applications involving confined spaces such as tank cleaning and industrial container
maintenance. The high light output, good light color and evenness of coverage makes these lights ideal for a wide variety of close quarter work
and inspection activities.
02/09/2015
Page: 233
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
40' Container Dark
Click Photos to Enlarge
Container With EPL-FL1524-LED
Click Photos to Enlarge
The 15-watt LED lamp used in this unit provides as much illumination as higher-wattage incandescent lamps without the associated heat,
reducing the chances of accidents or burns. This lamp has no ballast, which reduces lamp weight, an impact resistant tube shield with specially
designed annealed glass and an aluminum hook for easy overhead mounting. The 50 foot long, Class 1 Division 1 rated SOOW 16/3 AWG cord
and explosion proof slip-ring housing help this unit to achieve approval for use in environments containing flammable vapors and combustible
dusts. This explosion proof fluorescent hand lamp can be used within hazardous locations rated Class1 Division 1 and 2, and Class 1 Division 1
and 2, making it ideal for hazardous work areas where a ready source of easily managed lighting is desired.
Note about Voltage: This light operates on a standard 120/277 Volts and ends in a NEMA 5-15 Plug. If the operator chooses the low voltage
version, a plug will not be shipped with this light.
Lamp Features
2 foot 15 watt LED Tube Lamp 50,000 hour service life
Non-sparking aluminum housing
No Ballast
Molded rubber bumper guards
Annealed glass tube shields prevent shattering
Integrated lamp shock absorbers prevent drop damage to bulbs
Swivel hook for hanging and hands free operation
Explosion proof cord
02/09/2015
Page: 234
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-FL1524-LED-50 Work Light
U.L. Ratings
FM Listing: United States
Class 1, Division 1 & 2 for Group D
Dimensions: L-27 " Dia-3.25"
Class II, Division 1 Groups E, F, G
Weight: 14.5 lbs
Class III, Division 1 & 2
Total Watts: 15 watts
Total Lumens: 1450
Voltage: 120V-240V 50/60Hz / 12/24 Volt Option Available
Lamp Lengths: 2 Foot
Mounting: Aluminum Hook
Wiring: 50' 16/3 AWG SOOW cord
Lamp Type: LED Tube Lamp
Special Orders- Requirements
F.M. Approval: U.S Certificate
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge
the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available.
Customer must pay shipping to and from the destination. Please
contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EPL-FL1524-LED-50;
Monthly...$181.00 USD
Weekly...$126.00 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 235
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Extension Cord - 50' 12/3 SOOW Cord - 20 Amp - w/ Additional EP Plug - RENTAL
Part #: RNT-EPEXC-50-12
Price: $954.50
Larson Electronics 50' Explosion Proof Extension Cord
This unit is for RENTALS
The Larson Electronics EPEXC-50-12 Explosion Proof extension cord allows operators to safely extend the range of their explosion proof light or
equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 50 feet of 12/3 SOOW explosion proof cord
rated at 20 amps of continuous service. The cord is chemical and abrasion resistant and comes with an explosion proof, 20 amp receptacle
installed on one end and an explosion proof 20 amp plug installed on the other end. We also include an extra matching 20 amp plug for operators
to attach to their equipment which allows them to avoid any issues with plug/receptacle-equipment compatibility with this cord. The plug on this
cord can only be used in T style outlets and will not work in standard electrical outlets.
The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug
and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the
highest safety, operators should make connections outside of the hazardous area.
The receptacle contacts are deep recessed to avoid accidental contact and will accept standard non explosion proof plugs that are NEMA 5-20R,
or 6-20R compatible although explosion proof plugs must be used to preserve explosion proof approval in hazardous environments. Ordinary
location plugs will NOT activate this cord's explosion proof receptacle.
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Page: 236
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Inter-Compatibility: These cords use T style plugs and will work with non-explosion proof standard receptacles and plugs (NEMA 5-15R, 5-20R,
or 6-20R) but will not work with standard 120V wall outlets. The included plugs and receptacle are cross-interchangeable with Crouse Hind™
part# ENP5201 plugs and receptacles and Hubble-Killiark part#UGP-20231 ACCEPTOR® plugs and receptacles. Any equipment requiring these
C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangability although we have
made every effort to ensure cross compatibility correctness.
Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations
Where Combustible Dust is Present.
Specifications / Additional Information
EPEXC50-12 Explosion Proof Extension Cord
Plug / Outlet Certifications
Amp Rating: 20 amp Continuous Service
Class 1 Div 1 Groups C and D
Dimensions: Cord length-50 Feet Plug-2.78"-L 1.75"-W
Class 2 Div 1 Groups E, F and G
Configuration: 3 Pole 2 Wire
Suitable Plug Cable Diameter: .538” to .639”
Receptacle Specs:
Configuration: 3 Pole 2 Wire
Materials: Copper Free Aluminum
Dimensions: 3"-W X 5.69"-D X6.13"-H
Mating Plugs: ****EPP-15A, EPP-20-A****
Special Orders- Requirements
Finish: Epoxy Powder Coat
Contact us for special requirements
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
U.L. Certification
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental prices for the EPEXC-50-12;
Monthly...137.00 USD
Weekly...85.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 237
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 238
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 239
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Light on Pedestal Mount - 300 Watts - 100' Cord w/ Exp. Prf. Plug - RENTAL
Part #: RNT-EPL-PM-1X300-100
Price: $941.34
Made in the USA
The RNT-EPL-PM-1X300-100 Explosion Proof Metal Halide Light is U.L. approved Class 1 Group D, and is rated for use in wet and marine
environments. The waterproof construction and halogen lamp used with this unit provides operators with excellent power and economy
coupled
with high versatility and excellent durability.
This Unit Is For Rentals
The RNT-EPL-PM-1X300-100 Pedestal Mounted Explosion Proof Light provides 3,000 square feet of work area coverage with 3030 lumens of light
output. The 300 watt halogen lamp on this unit produces illumination in a wide flood pattern and provides an economical alternative to higher priced light
sources. This portable unit is waterproof and tested to 500 hours of salt spray exposure in accordance with MIL-F-8115C Military Specifications.
02/09/2015
Page: 240
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 241
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
40' container no illumination
With the EPL-PM-1X300-100
02/09/2015
Page: 242
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
ERROR: Infinite table loop
02/09/2015
Page: 243
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
02/09/2015
Page: 244
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Aluminum LED Drop Light - 15 Watts - Class I, Div. I - 50' Cord - RENTAL
Part #: RNT-EPL-FL1524-LED-50
Price: $857.00
Made in the USA
This Unit is for Rentals
The Larson Electronics RNT-EPL-FL1524-LED-50 Hazardous Area LED Work light is U.L. approved Class 1 Division 1 & 2. With a 2 foot long 15
watt LED tube lamp, this hazardous location light provides better quality light than higher wattage incandescent lights and more light than
previous fluorescent lamp equipped models. This light is suitable for exposure to vapors and dusts and ideal for use in paint spray booth
inspections or as general portable lighting in confined spaces like fuel tanks or grain storage areas.
This 2 foot long, 15 watt, explosion proof LED work light from Larson Electronics.com comes complete with a 50 foot long explosion proof cord for long
range and convenient operation. This hazardous location area light features a rugged, non-sparking aluminum casing and unique rod cage and produces
cool, glare-free, shadowless light that improves safety in hazardous locations and maximizes lighting efficiency with built-in metal reflectors.
These LED lights improve on the desirable qualities of similar fluorescent models with higher output and better light quality and are ideal for paint booth
applications, storage container inspections and applications involving confined spaces such as tank cleaning and industrial container maintenance. The
high light output, good light color and evenness of coverage makes these lights ideal for a wide variety of close quarter work and inspection activities.
02/09/2015
Page: 245
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
40' Container Dark
Click Photos to Enlarge
Container With EPL-FL1524-LED
Click Photos to Enlarge
The 15-watt LED lamp used in this unit provides as much illumination as higher-wattage incandescent lamps without the associated heat, reducing the
chances of accidents or burns. This lamp has no ballast, which reduces lamp weight, an impact resistant tube shield with specially designed annealed
glass and an aluminum hook for easy overhead mounting. The 50 foot long, Class 1 Division 1 rated SOOW 16/3 AWG cord and explosion proof slip-ring
housing help this unit to achieve approval for use in environments containing flammable vapors and combustible dusts. This explosion proof fluorescent
hand lamp can be used within hazardous locations rated Class1 Division 1 and 2, and Class 1 Division 1 and 2, making it ideal for hazardous work areas
where a ready source of easily managed lighting is desired.
Lamp Features
2 foot 15 watt LED Tube Lamp 50,000 hour service life
Non-sparking aluminum housing
No Ballast
Molded rubber bumper guards
Annealed glass tube shields prevent shattering
Integrated lamp shock absorbers prevent drop damage to bulbs
Swivel hook for hanging and hands free operation
Explosion proof cord
02/09/2015
Page: 246
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-FL1524-LED-50 Work Light
U.L. Ratings
UL Listing: United States
Class 1, Division 1 & 2 for Group D
Dimensions: L-27 " Dia-3.25"
Class II, Division 1 Groups E, F, G
Weight: 14.5 lbs
Class III, Division 1 & 2
Total Watts: 15 watts
Voltage: 120V-240V 50/60Hz
Lemp Lengths: 2 Foot
Mounting: Aluminum Hook
Wiring: 50' 16/3 AWG SOOW cord
Lamp Type: LED Tube Lamp
U.L Approval: U.S Certificate
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is
returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned.
Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further
information if required.
Rental Prices for the RNT-EPL-FL1524-LED-50;
Monthly...$148.00 USD
Weekly...$89.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their
rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if
needed.
Scroll Down to Purchase-
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
02/09/2015
Page: 247
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof LED Light w/ 4' LED Bulbs - 2 LED Bulbs - Class I, Div. I - RENTAL
Part #: RNT-EPL-48-2L-LED
Price: $840.00
Made in the USA
The Larson Electronics RNTEPL-48-2L-LED Explosion Proof LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 1 &2 and
Class 2 Division 1 and 2 for areas where flammable chemical/petrochemical vapors exist or have the potential to exist. This explosion
proof LED light has a T-6 temperature rating and a carries a paint spray booth light certification as well.
This Unit is for Rentals
The RNT-EPL-48-2L-LED is equipped with Larson Electronics’s specially designed LED T-series bulbs which produce 15% more foot candles of
illumination at 8 feet as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter
than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. We have replaced two
8 foot dual lamp T8 fixtures in our own facility with our LED T series lamps and produced more illumination in the work area with only one 2 lamp
4 foot long LED fixture.
We now offer our second generation LED tube lamps with this fixture which have increased this hazardous location light’s performance.
Click Here to Enlarge
Click Here to Enlarge
02/09/2015
Click Here to Enlarge
Page: 248
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
We have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile.
There is no ballast in this unit and the included LEDT-24W LED lamps have a 50,000+ hour service life, both of which result in extreme efficiency
and greatly reduced maintenance costs. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration,
extremes in temperature and a lamp service life over twice that of standard T8 bulbs.
The 24 watt LED lamps produce more illumination than standard T8 bulbs, but draw only 3/4 of current. An EPL-48-2L-T8 explosion proof
fluorescent light, with a combined total of 64 watts, draws 0.54 amps @120 volts. This LED version of the same light, with a total of 48 watts,
draws only .4 amps. The EPL-48-2L-LED is multi-voltage (universal) and operates on any voltage from 120V to 277V AC 50/60hz. We also make
a 12/24VDC version for low voltage applications (-LV suffix) for DC power.
Our EPL-48-2L-LED LED light fixture is U.S. and Canada U.L. approved for use in paint spray booths. Please note, according to the NEC, using
threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe
implementations.
Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by
tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at
the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the
light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown
below illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the
opposite end of the fixture.
Additional mounting options:
Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a
pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).
Made in USA Quality
Superior LED Benefits
1. Each unit dialectrically tested.
2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture.
3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy
4. No ballast box. No ballast to replace. We simply run the black wire
to one end of the bulb and white wire to the other.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture,
while some competitive models require the “tap and knock off” method
to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp
protection.
1. 50,000 hour lifespan.
02/09/2015
2. Can SAVE 50% or more on energy.
3. Qualifies retrofit projects for financial incentives, including utility
rebates, tax credits and energy loan programs.
4. Reduces energy use and prolongs life-spans of peripheral cooling
units (A/C, refrigeration)
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LEED and other sustainable business
certifications.
9. Bright, even light maintains consistent color over time.
10. Instant on/off – No flickering, delays or buzzing.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
Page: 249
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-48-2L-LED Explosion Proof
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 1, Groups C and D
Dimensions: W-11.25" L-52" H-8.5 "
Class 1 Division 2, Group A,B,C,D
Weight: 45 Lbs
UL 595 Outdoor Marine Type (Saltwater)
Total Watts: 48 watts
UL 844, 924
Voltage: Universal 120-277VAC 50/60 hz
UL 1598 Marine Type
Low Voltage (Optional): 12/24 Dc power
Class II, Division 1 - 2, Groups E,F,G
LED Lamp Life Expectancy: 50,000+ Hours
UL Certified Canadian Standards
Efficiency: 90 Lumens per Watt
UL listed for Paint Spray Booth Operation
Operating Temp Range: T6 Rated -40 C to 85 C
Beam Angle: 150 degrees
Special Orders- Requirements
Color Temp: 5300K
Contact us for special requirements
Mounting: Surface Standard - Pendant Optional
Wiring Hub: 1/2 inch threaded
Toll Free: 1-800-369-6671
Warranty: YES- 3 Years*
Intl: 1-903-498-3363
U.L Approval: U.S Certificate Canada Certificate
E-mail: [email protected]
*5 year warranty replacement on this LED light (or LED bulbs for light
fixtures with removable LED bulbs). After 30 days, the customer ships
the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new
replacement to the customer. If failure occurs within 30 days of receipt,
Larson Electronics will provide a return label via email to the customer.
When the failed light is returned, Larson Electronics will ship a new
replacement.
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-EPL-48-2L-LED;
Monthly...$160.00 USD
Weekly...$100.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase- Please note: 2-3 day lead time on this light.
02/09/2015
Page: 250
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 251
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- EASM
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 - Hi-Res Image 8 - Hi-Res Image 9 - Hi-Res Image 10 -
02/09/2015
Page: 252
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
12/24 Volt Explosion Proof LED light - Class 1 Div 1 & Class 2 Div 1 - Paint Spray Booth - RENTAL
Part #: RNT-EPL-48-2L-LED-LV
Price: $840.00
Made in the USA
The Larson Electronics RNT-EPL-48-2L-LED-LV 12 / 24 Volt Explosion Proof LED Light Fixture is U.S./Canada U.L. approved Class 1
Division 1, Class II Division I, and is UL 844 certified for use within oil rigs, paint spray booths and other hazardous location areas.
This unit has a T6 temperature rating and carries a paint spray booth certification.
The RNT-EPL-48-2L-LED-LV is designed to use Larson Electronics’s specially constructed 12/24 volt LED T-series bulbs which
produce 15% more foot candles of illumination at 8 feet as compared to standard T8 lamps and is UL 844 certified Class 1 Division 1 and Class II
Division 1. This low voltage fixture can operate on 12 or 24 volts AC or DC. This makes it useful in remote applications where battery banks are
used or where OSHA or internal safety standards mandate low voltage lighting. Our LED-T series bulbs are visibly brighter than standard T8s
and consistently surprise many of our customers with their unexpectedly high light output levels.
We have replaced two 8 foot dual lamp T8 fixtures in our own facility with our LED T series lamps and produced more illumination in the work
area with only one 2 lamp 4 foot long LED fixture. We now offer our second generation LED tube lamps with this fixture which have increased
this unit’s performance.
02/09/2015
Page: 253
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
02/09/2015
Click Photo to Enlarge
Page: 254
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
We have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight, creates a slimmer unit profile, and
helps this fixture maintain a T-6 temperature rating. There is no ballast in this unit and the included 12/24 volt LED T-series lamps have a 50,000
hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of the LED lamps give
this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard
T8 bulbs.
The 24 watt LED lamps produce more illumination than standard T8 bulbs, but draw only 3/4 of current. An EPL-48-2L-T8 explosion proof
fluorescent light, with a combined total of 64 watts, draws 0.54 amps @120 volts. This LED version of the same light, with a total of 48 watts,
draws only 0.4 amps. The EPL-48-2L-LED-LV is multi-voltage and works with any voltage between 9-32V DC, making it ideal for 12 and 24 volt
DC applications. We also offer this lamp in a 120-277 standard voltage model.
Our RNT-EPL-48-2L-LED-LV light fixture is U.S. and Canada U.L. approved for use in paint spray booths. Please note, according to the NEC,
using threaded rigid pipe does not require additional seal offs with this fixture. An EYM with CHICO is necessary for flex conduit or other non-rigid
pipe implementations.
Additional mounting options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown above.
We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).
Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by
tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at
the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the
light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown
above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the
opposite end of the light.
Made in USA Quality
Superior LED Benefits
1. 50,000 hour lifespan.
1. Each unit dialectrically tested.
2. Can SAVE 50% or more on energy.
2. Fixture arrives assembled and lamped to reduce installation time and
3. May qualify retrofit projects for financial incentives, including utility
cost. Adjustable mounting brackets enable the operator to choose any
rebates, tax credits and energy loan programs.
mounting angle for the fixture.
4. Reduces energy use and prolongs life-spans of peripheral cooling
3. Fixture constructed of extruded corrosion resistant copper free
units (A/C, refrigeration)
aluminum alloy
5. 100% recyclable.
4. No ballast box. No ballast to replace. We simply run the black wire
6. No toxins-lead, mercury.
to one end of the bulb and white wire to the other.
7. No UV light, infrared radiation or CO2 emissions.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective
8. Qualifies buildings for LEED and other sustainable business
finish. Resists dents and corrosion.
certifications.
6. A wrench is used to unscrew the end caps for relamping the fixture,
9. Bright, even light maintains consistent color over time.
while some competitive models require the “tap and knock off” method
10. Instant on/off – No flickering, delays or buzzing.
to loosen the end cap.
11. Very good color rendering.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp
12. Vibration/impact resistant.
protection.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
02/09/2015
Page: 255
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-48-2L-LED-LV Explosion Proof
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 1, Groups C and D
Dimensions: W-11.25" L-52" H-8.5 "
Class 1 Division 2, Group A,B,C,D
Weight: 45 Lbs
UL 595 Marine Type (Saltwater)
Total Watts: 48 watts
UL 844, 924
Voltage: 12/24 volts DC
UL 1598 Marine Type
LED Lamp Life Expectancy: 50,000+ Hours
Class II, Division 1 - 2, Groups E,F,G
Efficiency: 90 Lumens per Watt
UL Certified Canadian Standards
Efficiency: 90 Lumens per Watt
UL listed for Paint Spray Booths
Ambient Operating Temp Range:-30 C to 85 C
California Title 24 Compliant
Operating Temp Rating: T6 Rated
Minimum Operating Temp: -30 C
Maximum Case Temp: 90 C
Beam Angle: 150 degrees
Special Orders- Requirements
Color Temp: 5300K- CRI-75
Contact us for special requirements
Mounting: Bracket Standard - Pendant Optional
Contact us for special requirements
Wiring Hub: 1/2 inch threaded
Toll Free: 1-800-369-6671
Warranty: YES- 3 Years*
Intl: 1-903-498-3363
U.L Approval: U.S Certificate Canada Certificate
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other
paper work, Larson Electronics processes rentals like purchases
until the product is returned. (Rent to Own Rates) This means, we
will charge the customer for the product total and credit back the
difference once the fixture is returned. Weekly and Monthly terms
are available. Customer must pay shipping to and from the
destination. Please contact us at (903) 498-3363 for further
information if required.
Rental Prices for the RNT-EPL-48-2L-LED-LV;
Monthly...$160.00 USD
Weekly...$100.00 USD
Subtract rental cost from total cost for the amount that will be credited
back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period.
When returned, deductions will also be made for shipping, repairs, and
excessive cleaning, if needed.
Scroll Down to Purchase- Please note: 2-3 day lead time on this light.
02/09/2015
Page: 256
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 257
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- EASM
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 - Hi-Res Image 8 - Hi-Res Image 9 - Hi-Res Image 10 -
02/09/2015
Page: 258
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof LED Drop Light - Class I, Div. I - 120VAC to 12VDC - 10W LED - RENTAL
Part #: RNT-EHL-LED-120X12-100
Price: $835.00
Made in the USA
This Unit Is For Rentals
The Larson Electronics RNT-EHL-LED-120X12-100 Explosion Proof LED Drop Light / Trouble Light is U.L. approved Class 1 Division 1
& 2 Groups C and D - and is ideal for general work activities in hazardous locations requiring explosion proof protection.
This 10 watt explosion proof LED work light from Larson Electronics produces 1470 lumens of bright white light and comes complete with 100
feet of explosion proof cord. The EHL-RNT-EHL-LED-120X12-100 LED drop light has no ballast and the housing is constructed of non sparking
aluminum, which results in a very lightweight unit. This hazardous location hand lamp is Class 1, Division 1 and 2 and Class 2 Division 1 and 2
hazardous location environment approved. This explosion proof LED drop light is designed to operate with 12VDC current for for low voltage
operation.
100 Watt Incandescent Bulb
Click Photos to Enlarge
With the RNT-EHL-LED-120X12-100
Click Photos to Enlarge
02/09/2015
Click Photos to Enlarge
Page: 259
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This 10 watt LED drop light is suitable for use in areas where petrochemical vapors and various dusts are present and projects 1470 lumens of
light, which is twice the lumens per watt output of a 100 watt incandescent bulb. This unit is rated Class 1, Division 1 and comes with 100’ of
SOOW 16/3 AWG cord ending in a 5-15 straight blade plug.
This hand lamp has a high efficiency LED bulb that requires no ballast, so the operator doesn't need to drag the ballast housing around. This can
be particularly annoying when the ballast becomes entangled in the cord. This explosion proof LED hand light operates on 12 Volts DC for for low
voltage operations. An included inline transformer allows this unit to plug into a standard outlet and operate from 120-277VAC, then steps the
current down to 12VDC for operating the lamp.
The light produced by this unit has a 6000k color temperature, which is much sharper and whiter than the light produced by incandescent lamps.
The light produced by this lamp is ideal for close work and inspection activities where good contrast and true color representation is needed. The
LED lamp in this unit runs much cooler than incandescent or flourescent lamps, resulting in a lamp housing that remains cool to the touch and
eliminates the accidental burns often encountered with incandescent drop lights.
Made in USA Quality
Lamp Features
1. Federal Spec Cord.
2. Explosion Proof.
3. 10 Watt 1470 Lumen LED Lamp.
4. Rugged fabricated steel and cast aluminum construction.
5. Blue and Gray paint finish.
6. UL Class1 Div1 Class 2 Div1
7. 120 Volt Operation
8. SOOW cable.
9. Aluminum Hook for Convenient Placement.
02/09/2015
10 watt LED light produces 1470 lumens
Non-sparking aluminum housing
50,000 hour LED Lamp
Molded rubber bumper guard
Annealed glass tube shields prevent shattering
Integrated lamp shock absorbers prevent drop damage
Swivel hook for hanging and hands free operation
Explosion proof cord
Page: 260
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EHL-LED-120X12-100
U.L. Ratings
UL Listing: United States
Class 1, Division 1 & 2 for Groups C, D
Dimensions:L-16.5 " Dia-5"
Class II, Division 1 and 2 for Groups F, G
Lumens: 1470
UL standard 781
Total Watts:10 watts
CSA standard C22.2 No. 12
Voltage: Stnd-12VDC Inline Step-Down Transformer
CSA standard C22.2 No. 137
Color Temp: 6000k
Mounting: Aluminum Hook
Wiring: 100' SOOW Cord
Lamp Type:: LED
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
YOU CAN RENT THIS UNIT. CONTACT 1-800-369-6671.
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-EHL-LED-7W-50-HR;
Monthly...160.00 USD
Weekly...104.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase- Same Day Shipping on This Light!
02/09/2015
Page: 261
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 262
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 -
02/09/2015
Page: 263
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof LED Drop Light - Class I, Div. I - Inline Transformer Steps Down *RENTAL*
Part #: RNT-EHL-LED-120XLV-100
Price: $835.00
This Unit is for Rentals
Made in the USA
The Larson Electronics RNT-EHL-LED-120XLV-100 Rental Explosion Proof LED Drop Light / Trouble Light is U.L.
approved Class 1 Division 1 & 2 Groups C and D - and is ideal for general work activities in hazardous locations
requiring explosion proof protection.
This 10 watt explosion proof LED work light from Larson Electronics produces 1050 lumens of bright white light and comes
complete with 100 feet of explosion proof cord. The RNT-EHL-EHL-LED-120XLV-100 LED drop light has no ballast and the
housing is constructed of non sparking aluminum, which results in a very lightweight unit. This hazardous location hand
lamp is Class 1, Division 1 and 2 and Class 2 Division 1 and 2 hazardous location environment approved. This explosion
proof LED drop light is designed with a 12 volt or 24 volt LED bulb to operate with 12VDC or 24VDC current for for low
voltage operation.
100 Watt Incandescent Bulb
Click Photos to Enlarge
With the RNT-EHL-LED-120X12-100
Click Photos to Enlarge
02/09/2015
Click Photos to Enlarge
Page: 264
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This 10 watt LED drop light is suitable for use in areas where petrochemical vapors and various dusts are present and
projects 1470 lumens of light, which is twice the lumens per watt output of a 100 watt incandescent bulb. This unit is rated
Class 1, Division 1 and comes with 100’ of SOOW 16/3 AWG cord ending in a 5-15 straight blade plug.
This hand lamp has a high efficiency LED bulb that requires no ballast, so the operator doesn't need to drag the ballast
housing around. This can be particularly annoying when the ballast becomes entangled in the cord. This explosion proof
LED hand light operates on 12 Volts DC or 24 Volts DC for for low voltage operations. An included inline transformer allows
this unit to plug into a standard outlet and operate from 110-277VAC, then steps the current down to 12V/24V DC for
operating the lamp.
The light produced by this unit has a 6000k color temperature, which is much sharper and whiter than the light produced by
incandescent lamps. The light produced by this lamp is ideal for close work and inspection activities where good contrast
and true color representation is needed. The LED lamp in this unit runs much cooler than incandescent or flourescent
lamps, resulting in a lamp housing that remains cool to the touch and eliminates the accidental burns often encountered
with incandescent drop lights.
Made in USA Quality
Lamp Features
1. Federal Spec Cord.
2. Explosion Proof.
3. 10 Watt 1050 Lumen LED Lamp.
4. Rugged fabricated steel and cast aluminum construction.
5. Blue and Gray paint finish.
6. UL Class1 Div1 Class 2 Div1
7. 12V/24V DC Volt Operation
8. SOOW cable.
9. Aluminum Hook for Convenient Placement.
10 watt LED light produces 1470 lumens
Non-sparking aluminum housing
50,000 hour LED Lamp
Molded rubber bumper guard
Annealed glass tube shields prevent shattering
Integrated lamp shock absorbers prevent drop damage
Swivel hook for hanging and hands free operation
Explosion proof cord
02/09/2015
Page: 265
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EHL-LED-120X12-100
U.L. Ratings
UL Listing: United States
Class 1, Division 1 & 2 for Groups C, D
Dimensions:L-16.5 " Dia-5"
Class II, Division 1 and 2 for Groups F, G
Lumens: 1050
Conforms to UL 781
Total Watts:10 watts
Certified to CSA STD C22.2 No. 12 and CSA STD C22.2 No 137
Voltage: Stnd-12V/24V DC Inline Step-Down Transformer
Color Temp: 6000k
Mounting: Aluminum Hook
Wiring: 100' SOOW Cord
Lamp Type:: LED
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
YOU CAN RENT THIS UNIT. CONTACT 1-800-369-6671.
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product is
returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is returned.
Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further
information if required.
Rental Prices for the RNT-EHL-LED-120XLV-100;
Monthly...$240.00 USD
Weekly...$160.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert their
rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive cleaning, if
needed.
Scroll Down to Purchase- Same Day Shipping on This Light!
02/09/2015
Page: 266
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 267
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
- STEP
- DXF
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 -
02/09/2015
Page: 268
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
26W Low Voltage (12 vdc) Explosion Proof Fluorescent Drop/Hand Lamp w/ Inline Transformer - RENTAL
Part #: RNT-EPLFL-26W-P-12VI-100
Price: $795.00
Made in the USA
This Unit Is For Rentals
The Larson Electronics RNT-EPLFL-26W-P-12VI-100 Hazardous Area Fluorescent Work light is U.L. approved Class 1 Division1 Groups
C and D and is ideal for close quarter work and inspection activities in hazardous locations requiring explosion proof protection.
This 120VAC to 12 VDC-26 watt explosion proof fluorescent work light from Larson Electronics produces 1800 lumens of fluorescent illumination
and comes complete with 100 feet of explosion proof cord, an inline step down transformer, and a straight blade plug. The EPLFL-26W-P-12VI100 fluorescent drop light uses a compact fluorescent bulb and the lamp body is constructed of high strength plastic and aluminum which helps
to reduce weight and improve durability.This hazardous location hand lamp is Class 1, Division 1 and Class 2 Division 1 hazardous location
environment approved.
An inline step down transformer reduces the 120 VAC input to 12 volts DC. The 100 foot SOOW cord carries the 12 volts to the explosion proof
hand lamp. The inline transformer is encapsulated in a Nema compliant enclosure with an aluminum handle for portability.
02/09/2015
Page: 269
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
This 26 watt fluorescent light operates on 120 Volt current that is stepped down by an inline transformer to 12 Volts and is suitable for use in
areas where petrochemical vapors and various dusts are present. The lamp creates 1,800 lumens of light, roughly equivalent to a 100 watt
incandescent bulb as estimated by Sylvania. The bulb is backed with a white reflector which is designed to keep the light out of the operator's
eyes and focus more of the light on the subject area. Fluorescent lights are popular in paint prep, painting and post-paint inspection operations
due to the even white color light produced. Incandescent lights tend to create yellowish, shadowy light that confuses the eye and makes it difficult
to examine a work area with consistency. The light output, color and evenness of coverage make fluorescent lights popular for a wide variety of
close quarter work and inspection activities.
This explosion proof hand lamp is relatively easy to relamp. Set screws hold the 2 piece plastic cover in place over the aluminum core. Once the
plastic covers are unscrewed, the bulb is revealed. The bulb is encapsulated within a glass dome, which is enveloped by the plastic outer
housing. An aluminum ring is screwed into place over the lip of the dome and a o-ring style gasket ensures the seal. Once the glass dome and
seal are removed, the operator can replace the 4-pin compact fluorescent bulb.
Made in USA Quality
Lamp Features
1. Federal Spec JC-580A Cord.
2. Indoor or outdoor use.
3. Low 12VDC operation.
4. Rugged plastic and aluminum construction.
5. Sealed Lamp Cover.
6. UL Listed Class1 Dv 1, Class 2 Div 1
7. Lightweight.
8. 100' SOOW cable- 515 straight blade plug.
9. UL and CUL Listed.
26 watt fluorescent produces 1800 lumens.
Plastic and aluminum housing.
Compact fluorescent lamp.
No inline ballast to tangle or damage.
Glass lamp shield prevents shattering
Lamp and glass cover protected by plastic cage.
Swivel hook for hanging and hands free operation.
Explosion proof cord.
02/09/2015
Page: 270
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPLFL-26W-P-12VI-100 Hand Lamp
U.L. Ratings
UL Listing: United States - Canada
Class 1, Division 1 for Groups C, D
Dimensions: L-23 " Dia-4"
Class II, Division 1 Groups F, G
Lamp Type: Compact Fluorescent
UL listed U.S. and Canada
Total Watts: 26 watts
UL Listed Explosion Proof Cord
Voltage: Stnd-120V stepped down to 12V
Total Lumens: 1800
Mounting: Swivel Hook
Wiring: 100' SOOW Cord
U.L Approval: U.S Certificate Canada Certificate
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information
if required.
Rental Prices for the RNT-EHL-LED-7W-50-HR;
Monthly...$397.00 USD
Weekly...$265.00 USD
Scroll Down to Purchase- Same Day Shipping Available!
02/09/2015
Page: 271
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
02/09/2015
Page: 272
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Class 1 Div. 2 & Class 2 Div. 1 400 Watt Metal Halide Light - Ceiling or Pendant Mount - RENTAL
Part #: RNT-EPLC2-400MH
Price: $790.00
Made in the USA
*RENTAL UNIT*
The EPLC2-400MH metal halide, hazardous area light fixture from Larson Electronics produces 34,000 lumens of light capable of
illuminating an area approximately 18.000 square feet in size. Weather proof and U.L. listed for marine use, this metal halide fixture is
available in pendant, ceiling or wall mount versions and is an ideal choice for industrial applications and use in enclosed spaces.
The durable EPLC2-400MH metal halide fixture from Larson Electronics is approved for use in wet marine locations and is ideal for industrial
applications, confined spaces, hazardous work areas and Class 1 DIV 2 areas where a powerful and durable floodlighting solution is needed.
The lamp housing is weatherproof and constructed of non-sparking aluminum featuring a heavy duty, mogul base lamp socket, tempered and
heat resistant glass dome and cast aluminum dome guard. This lamp carries a long lamp life rating of 60,000 hours and a fast hot restrike
capability, reducing downtime and replacement costs.This unit is available in pendant, ceiling and wall mount versions and includes stainless
steel exterior hardware for added resistance to the salt water conditions found in marine environments.
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Page: 273
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This hazardous area light is U.L. rated Class 1 Division 2, Groups A, B, C and D and UL1598 listed for outdoor marine use. The integral multi-tap
ballast is protected within the weatherproof housing and can be operated on 120, 208, 240 and 277 Volts. This lamp is suitable for use in
confined spaces and areas where wet marine conditions exist. The multi-purpose floodlight design of this fixture makes it a popular choice for
industrial and marine applications regardless of whether the locations are designated hazardous or not. The non sparking aluminum fixture body
is electrocoated for durability and corrosion resistance while a tempered glass globe protected by an aluminum globe guard provides lamp
security against impacts and the elements.
Wiring: This light is highly durable and produces high 34,000 lumen light output in a wide flood pattern. Wiring is through a convenient ¾ inch
NPT conduit entrance. Three-conductor No. 14 cable (with 90° C minimum insulation) is recommended for making electrical connections. Wiring
is accomplished through the wiring enclosure provided on the fixture. The box is provided with a size 3/4-in. NPT threaded conduit opening.
Wiring methods must comply with NFPA 70 (The National Electrical Code).
Suggested applications: ship yards, boat yards, plants, tanks, vessels, fuel cells, barges and oil field applications.
Made in the USA Quality
Metal Halide Benefits
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering.
5. Vibration and shock resistant.
6. Low maintenance.
1. High Efficiency Metal Halide lamp.
2. 90 Lumens per Watt.
3. Rugged Die Cast Aluminum Lamp Housing.
4. Shock Resistant Tempered Glass.
5. Heavy Duty Gasket.
6. Socket: Mogul Base.
7. Low Maintenance.
8. Corrosion Resistant Marine Approved.
9. Stainless Hardware.
10. UL Approved for Marine Environments.
Specifications / Additional Information
EPLC2-400MH Explosion Proof Metal Halide
U.L Ratings
Lamp Type: Metal Halide
Class 1, Division 2 Groups A,B,C,D
Lamp Dimensions: 21 1/2"-L, 13"-OD,
Class 1 Zone 2 -Groups IIA, IIB, IIC
Ballast: Pulse Start / Multi-Tap
Class 2, Division 1 & 2, Groups E,F,G
Watts: 400
NEMA 4x, IP66, NEMA 9
Lumens Per Watt: 90
UL 1598 Marine
Voltage: Multi-Tap -120, 208, 240 and 277 Volts
UL 844
Lighting Configuration: Flood Pattern
Suitable for Wet Locations
Mounting: 3/4" Ceiling, Wall or Pendant mount
U.L. Listing: Class1 DIV 2 Groups A,B,C,D
Total Lumens: 34,000
Special Orders- Requirements
Wiring: 3/4 inch Conduit
Contact us for special requirements
Temp Rating: 165C-T2A
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information
if required.
Rental prices for the EPLC2-400MH-REN; Monthly...395.00 USD Weekly...263.33 USD Subtract rental cost from total cost for the amount that
will be credited back to customer upon return of product. Deductions will also be made for shipping, repairs, and excessive cleaning, if needed.
02/09/2015
Page: 274
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
02/09/2015
Page: 275
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
1000 Watt Metal Halide Light - Class 1 Div. 2 Groups A-D - T3b Temperature - 110K lumens - RENTAL
Part #: RNT-HALPRM-1000WMH
Price: $788.50
Made in the USA
This unit is for rentals
The extremely durable Larson Electronics RNT-HALPRM-1000WMH metal halide hazardous area light produces exceptional
illumination from a 1000 watt metal halide lamp. Constructed of die cast aluminum and U.L. listed for marine use, this metal halide
fixture is a versatile and ideal hazardous area lighting solution for areas where wet or corrosive environments are encountered.
The rugged RNT-HALPRM-1000WMH metal halide light fixture is weatherproof and suitable for use in wet, outdoor and marine environments,
making it an ideal lighting solution for industrial applications, boat docks, building exteriors and outdoor work areas. The lamp housing is
weatherproof and constructed of pressure cast copper free aluminum with an architectural bronze Polyester finish. The lens door is pressure-cast
copper-free aluminum, and secured with 1/4” diameter captive stainless steel slotted hex-head bolts. This unit features an integral multi- tap
ballast with a choice of of 120V, 208V, 240V, or 277V connections. Also available are optional and seperate 220V and 480V configurations.
Choose voltage options when ordering.
The optical assembly includes thermal shock and impact resistant door glass with a pressure-cast copper-free aluminum door frame and heavy
duty, high temperature silicone rubber seal. The lamp socket is a specification grade mogul base porcelain unit with heavy gauge brass, a nickelplated, double lamp-grip screw shell and spring-loaded center contact. The reflectors are a double segment compound parabolic design with
Alzak® finish for maximum efficiency.
Mounting choices include:
(1) Yoke mount: zinc plated steel yoke with architectural bronze Polyester finish.
(2) Poletop mount: built-in slip-fitter for internal wiring. Adjustable laterally and vertically. Slip fits 2” or 2 1/2” pipe. Architectural bronze Polyester
finish.
This hazardous area light is rated IP65, U.L. standard 844 and 1598 compliant, approved Class 1 Division 2, Groups A,B,C,D, and U.L. listed
1598A for outdoor salt water marine environments. The integral multi-tap ballast is protected within the weatherproof housing and has primary
electrical taps for 120V, 208V, 240V, and 277V. This lamp is suitable for use in areas where flammable petrochemical vapors are sometimes
present in a non-confined, open air work space and IS NOT suitable for use in confined spaces.
This 1,000 watt metal halide light is highly durable, produces110,000 lumens in a wide flood pattern, and has a maximum operating temperature
of 325°C (T1 NEC Identification Number). All hardware on this unit is resistant to rain, snow, salt water and corrosive chemicals. The heavy duty
design and attractive finish of this fixture makes it a popular choice for outdoor applications regardless of whether the locations are designated
hazardous or not.
Bulb is not included with with this fixture.
02/09/2015
Page: 276
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Here for Notes on Wiring this Light
Make all electrical connections in accordance with the National Electrical Code and any applicable local code requirements. Verify that supply
voltage is correct by comparing it to nameplate. Three-conductor No. 14 cable (with 90° C minimum insulation) is recommended for making
electrical connections. Wiring is accomplished through the wiring box provided on the fixture. The box is provided with a size 3/4-in. NPT
threaded conduit opening. Wiring methods must comply with NFPA 70 (The National Electrical Code), Article 501 for Class I, Division 2
Hazardous (Classified) Locations. To get inside the unit, open the door, loosen the (2) screws holding the reflector and remove the reflector.
Verify the correct supply voltage and lamp wattage. Bulb not included.
Made in the USA Quality
Metal Halide Benefits
1. High Efficiency Metal Halide lamp.
2. Approximately 100-115 Lumens per Watt
3. Rugged Pressure Cast Aluminum Housing.
4. Thermal Shock and Impact Resistant Glass Lens Door.
5. Heavy Duty Door Gasket.
6. Socket: Mogul Base heavy gauge brass, nickel-plated double lampgrip screw shell .
7. Low Maintenance.
8. Slip Fit Pole Mount or Zinc Plated Yoke Mount.
9. Heavy Duty High Heat Silicone Door Glass Seal.
10. Architectural Bronze Polyester Finish.
02/09/2015
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering.
5. Vibration and shock resistant.
6. Low maintenance.
Page: 277
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-HALPRM-1000WMH Metal Halide
U.L Ratings
Lamp Type: Metal Halide
Class I, Division 2 Groups A, B, C, D
Dimensions: 22" W X 11" D X 26 1/4" H w/Yoke Mount
UL Standard 1598 (supersedes UL Standard 57)
Watts: 1000
UL Standard 844
Lumens Per Watt: 100-115 Approx.
Class I Div. 2 UL Standard 1598A
Voltage: 120V, 208V, 240V, or 277V / 220-480 OPT
Max OP Temp 325°C (T1 NEC ID Number)
Lighting Configuration: Flood Pattern
Operating temperature 325 degrees C (T3b)
Mounting: Slip Fit Pole Mount or Zinc Trunnion
Not Approved For Confined Spaces
Weight: 45 lbs
U.L. Listing: Outdoor Marine Approved
Total Lumens: 110,000
Special Orders- Requirements
Wiring: 3/4 inch Threaded NPT Conduit Entrance
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
Click here to view the Explosion Proof Light Design Description
E-mail: [email protected]
Click here to view the Explosion Proof Light Temperature Rating
Table
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information
if required.
Rental Prices for the RNT-HALPRM-1000WMH;
Monthly...$167.00 USD
Weekly...$100.00 USD
Scroll Down to Purchase-
Links (Click on the below items to view):
- Dimensional Drawing
- Manual
02/09/2015
Page: 278
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Class 1 Div. 2 Fluorescent Light - Stainless Steel- Corrosion Resistant - Saltwater - RENTAL
Part #: RNT-HALSS-48-2L
Price: $780.00
Made in the USA
The Larson Electronics RNT-HALSS-48-2L Hazardous Area Fluorescent Light Fixture is U.L. approved Class 1 Division 2 Groups A, B, C and D UL 1598A listed and is specifically designed to withstand high vibration locations and the rigors of wet and corrosive marine environments.
This unit is for rental contracts.
The RNT-HALSS-48-2L hazardous area fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where corrosion
resistance is critical to equipment longevity and safety. This Class 1 Division 2 rated fixture is constructed of non-corrosive materials including a stainless
steel housing, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Corrosion resistant stainless steel latches secure the lamp
cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This fixture is UL 844 rated and Class 1
Division II, Groups A, B, C, D approved. The RNT-HALSS-48-2L also carries UL 1598A and UL 595 outdoor marine ratings and meets US Coast Guard
specifications.
02/09/2015
Page: 279
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Page: 280
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This fixture is designed for heavy duty use in applications where intense vibration and corrosive environments may be encountered. Stainless steel
construction, high impact acrylic lamp covers, and a Class 1 Division 2 U.L. rating make this light ideal for hazardous areas that require illumination with
above average dependability.
NOTE ON LAMPS: This fixture comes equipped with F54-T5/841/HO – 54 Watt lamps producing 5,000 lumens per bulb, a 4100 Kelvin color and a
20,000 hour rated service life. We offer F48-T12/HO – 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin color and F32-T8/841 – 2950 lumens per
bulb, 24,000 hours life, 4100 Kelvin color tubes as lamp options for this fixture. The RNT-HALSS-48-2L has an electronic multi-voltage ballast and works
with 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ and 277 Volts 60 HZ. 24 Volt models available on request for an additional $100 per unit charge.
Standard Flange Brackets: Stainless steel bracket mounts attached at each end of the fixture enables it to be simply secured to any surface. The
mounts provide flexibility in setting the angle of the fixture. Three through holes provide sufficient mounting for any environment.
Suggested Applications: The RNT-HALSS-48-2L is designed for marine wet and damp locations, where corrosion resistant fluorescent lights are
required. This lamp is also ideal for locations where heavy vibratory conditions are present. This includes petrochemical facilities, lubrication pits, oil
drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks.
Made in USA Quality
Lamp Options
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and
cost. Flange type stainless steel mounts attached at each end of the fixture
enables it to be simply secured to any surface.
3. Fixture housing constructed of 14 gauge stainless steel..
4. Relamping done via stainless steel snap locking latches which allow the
operator to remove the door and access the lamps.
5. Lamp cover-diffuser constructed of high impact acrylic for corrosion
resistance and lamp protection.
6. 1/2 inch, threaded access hole for wiring conduit.
02/09/2015
F54-T5/841/HO – 54 Watt, 5000 lumens per bulb, 20,000 hours life, 4100
Kelvin color
F48-T12/HO – 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin color
F32-T8/841 – 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color
Page: 281
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-HALSS-48-2L Hazardous Area
U.L. Ratings
UL Listing: United States
UL 844 Class 1 Division 2, Groups A, B, C, D
Dimensions: W-9 1/2" L-54 " H-6 3/4"
UL 595 outdoor marine
Weight:35 Lbs
UL 1598A Marine Type (Salt water)
Total Watts: 108 watts*
Voltage: 120V-60hz 220V-50hz 240V-60hz 277V-60hz (24V on
Request)
Total Lumens: STD-T5-HO Bulbs 10,000
Lamp Life Expectancy: STD-T5-HO Bulbs 20,000 Hours
Efficiency: STD-T5-HO Bulbs 92 Lumens per Watt
Operating Temp Range: T4C Rated -30 C to 70 C
Minimum Operating Temp: -30 C
Maximum Case Temp: 90 C
Beam Angle: N/A
Special Orders- Requirements
Color Temp: 4100K-
Contact us for special requirements
Mounting: Flange type stainless steel
Toll Free: 1-800-369-6671
Wiring Hub: 1/2 inch threaded
Intl: 1-903-498-3363
U.L Approval: U.S Certificate
E-mail: [email protected]
Meets US Coast Guard specifications.
*Wattage totals are lamps only and may vary with different lamps.
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly
terms are available. Customer must pay shipping to and from the destination. Please contact us Toll Free: at 1-800-369-6671 or (903) 498-3363 for
further information if required.
Rental prices for the HAL-48-2L-UV-8-REN;
Monthly...290.00 USD
Weekly...193.33 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Deductions will also be made for shipping,
repairs, and excessive cleaning, if needed.
Scroll Down to Purchaseoil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks.
Links (Click on the below items to view):
- Dimensional Drawing
02/09/2015
Page: 282
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Extension Cord 250 Foot Cord - RENTAL
Part #: RNT-EPEXC-250
Price: $715.00
Made in the USA
This Unit is for Rentals
Larson Electronics RNT-EPEXC-250 250' Explosion Proof Extension Cord, Class1 Division 1 and Class 2 Division 1
The Larson Electronics RNT-EPEXC-250 Explosion Proof extension cord allows operators to safely extend the range of their explosion proof light
or equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 250 feet of 14/3 SOOW explosion proof
cord and are rated at 15 amps of continuous service. The cord is chemical and abrasion resistant and comes with a Class 1 Division 1 explosion
proof receptacle installed on one end and a Class 1 Division 1 explosion proof plug installed on the other end.
Click Photo to Enlarge
Click Photo to Enlarge
The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug
and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To remove all risk
and retain the highest level of protection, operators should make all connections outside of the hazardous work area.
Inter-Compatibility: These cords will work with non-explosion proof standard receptacles (NEMA 5-15R, 5-20R, or 6-20R). The included plugs
and receptacle are cross-interchangeable with Crouse Hind™ part# ENPENP5151 plugs and receptacles and Hubble-Killiark part# UGP-15231
ACCEPTOR® plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible
manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness.
Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations
Where Combustible Dust is Present.
02/09/2015
Page: 283
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPEXC-250 Explosion Proof Extension Cord
Certifications - Compliance
Amp Rating: 15 amp Continuous Service
Class 1 Div 1 Groups C and D
Dimensions: Cord length-250 Feet Plug-2.78"-L 1.75"-W
Class 2 Div 1 Groups E, F and G
Configuration: 3 Pole 2 Wire
Suitable Plug Cable Diameter: .538” to .639”
Receptacle Specs:
Configuration: 3 Pole 2 Wire
Materials: Copper Free Aluminum
Dimensions: 3"-W X 5.69"-D X6.13"-H
Mating Plugs: ****EPP-15A, EPP-20-A****
Special Orders- Requirements
Finish: Epoxy Powder Coat
Contact us for special requirements
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
U.L. Certification
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-EPEXC-250 ;
Monthly...$165.00 USD
Weekly...$100.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 284
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 285
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 286
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Fluorescent Light - Class 1 Div.1/Class 2 Div 1- 12/24VDC - RENTAL
Part #: RNT-EPL-48-2L-LV
Price: $849.00
Made in the USA
This unit is for rentals
The Larson Electronics EPL-48-2L-LV 12V/24V Explosion Proof Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1
Division 1, Class 1 Division 2 and ideal for hazardous locations where flammable chemical/petrochemical vapors exist or have the
potential to exist.
The EPL-48-2L-LV fixture is a 4 foot long, 2 lamp, UL listed Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light which
is also approved for use in paint spray booth applications and a good choice for use in applications requiring a low voltage source of illumination.
This T6 temperature rated fixture comes standard with two F32T8-841 fluorescent lamps which produce a combined 5,900 lumens of light. The
lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors
are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish.This fixture is multi-voltage capable and is available
with a variety of lamp options. The EPL-48-2L-LV provides operators in hazardous locations with a reliable and affordable low voltage lighting
solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability.
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Click Photo to Enlarge
Page: 287
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
NOTE ON LAMPS: All hazardous location lights are shipped with bulbs. This fixture comes equipped with F32-T8/841 32 Watt lamps producing
2950 lumens per bulb, 24,000 hours of service life and a 4100 Kelvin color. The EPL-48-2L-LV has an electronic ballast and only works with 12
or 24 volt lamps. Please specify your desired voltage option from the drop down menu below when ordering.
Energy Consumption Comparison
T5HO
T8
LED
Wattage
108 watts
64 watts
48 watts
Amp Draw @ 120V AC
0.9 amps
0.54 amps
0.4 amps
Amp Draw @ 277V AC
0.39 amps
0.24 amps
0.18 amps
Amp Draw @ 12V DC
9 amps
5.34 amps
4 amps
Amp Draw @ 24V DC
4.5 amps
2.67 amps
2 amps
Lamp Life Expectancy
20,000 hours
24,000 hours
50,000 hours
5000K / 4100K
4100K
5300K
$34.69
$20.56
$15.42
Color Temperature
Operation cost per year
(8hs/day @ 11c/kWh)
Additional mounting options: Unless otherwise specified, our standard, most popular configuration is the surface bracket end mounting shown
in the photos above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from
pipe or conduit).
Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by
tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at
the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the
light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown
above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the
opposite end of the fluorescent light.
Made in USA Quality
Lamp Options
02/09/2015
Page: 288
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
F32T8-841 – 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100
1. Each unit dialectically tested.
Kelvin color (Suffix –T8)
2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture, where other models may only offer one
or three choices.
3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.
4. Over-sized, finned ballast housing for 800 mA fixtures provides more
heat dissipation and extends ballast life. Larger ballast box
accommodates High Output lamp ballasts. Ballast housing easily
accessible and externally mounted. Top and bottom covers secured
with nuts and bolts, instead of threaded through holes, which can be
damaged with dirt.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture,
while other models require the “tap and knock off” method to loosen the
end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp
protection.
8. Spring loaded sockets on both ends hold lamps firmly for maximum
shock and vibration protection.
Click here to see the LED version of this light
02/09/2015
Page: 289
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-48-2L-LV Explosion Proof
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 1, Groups C and D
Dimensions: W-11.25" L-52" H-8.5 "
Class 1 Division 2, Group A,B,C,D
Weight: 65 Lbs
UL 595 Outdoor Marine Type (Saltwater)
Total Watts: 64 watts
UL 844, 924
Voltage: 12V - 24V
UL 1598 Marine Type
Total Lumens: STD-F32T8-841 Bulbs 5,900
Class II Division 1- 2, Groups E,F,G
Lamp Life Expectancy: STD-F32T8-841 Bulbs 24,000 Hours
UL Certified Canadian Standards
Efficiency: STD-F32T8-841 Bulbs 92 Lumens per Watt
UL listed for Paint Spray Booths*
Ambient Operating Temp Range: -30 C to 70 C
California Title 24 Compliant
Beam Angle: N/A
Color Temp: 4100K- F32T8-841 Bulbs
Special Orders- Requirements
Mounting: Bracket Standard - Pendant Optional
Wiring Hub: 1/2 inch threaded
Toll Free: 1-800-369-6671
U.L Approval: U.S Certificate Canada Certificate
Intl: 1-903-498-3363
Maximum Case Temp: 90 C
E-mail: [email protected]
Operating Temp Rating: T6 Rated
Minimum Operating Temp: -30 C
View a Photometric Graph of the EPL-48-2L Bulb Types
*Substitution of included standard bulbs for higher output lamps may affect paint spray booth approval.
*Wattage totals are lamps only and may vary with different lamps.
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental prices for the RNT-EPL-48-2L-LV;
Monthly...$199.00 USD
Weekly...$120.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase- Please note: 3 day lead time on this light.
02/09/2015
Page: 290
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 291
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet Spanish
- Dimensional Drawing
- Manual
02/09/2015
Page: 292
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
4', 2 Lamp Explosion Proof Surface Mount Fixture - Paint Booth Certified - Class I Div. I - RENTAL
Part #: RNT-EPL-48-2L
Price: $649.00
Made in the USA
The Larson Electronics RNT-EPL-48-2L Explosion Proof Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 1
and Class 1 Division 2 for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist.
The unit carries a T6 temperature rating, it is also approved for Paint Spray Booths.
This Unit is for Rentals
The RNT-EPL-48-2L fixture is a 4 foot long, 2 lamp, UL listed Class 1 Division 1 and Class 2 Division 1&2 explosion proof fluorescent light which
is also approved for use in paint spray booth applications. This T6 temperature rated fixture comes standard with two fluorescent lamps. Lamp
choices include T5HO, T12HO, T12VHO and T8. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed
of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective
finish.This fixture is multi-voltage capable and is available with a variety of lamp options.
The RNT-EPL-48-2L provides operators in hazardous locations with a reliable and affordable lighting solution that provides the best explosion
proof protection available without sacrificing light quality or fixture durability.
Click here to Enlarge
Click here to Enlarge
02/09/2015
Click here to Enlarge
Page: 293
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
We offer a choice of bulbs with all of our explosion proof fluorescent fixtures. However, we standardize on the T-5HO bulbs mostly for longevity
and high output. However, many of our customers, including Naval bases, shipyards, oil rigs and petrochemical processing plants operate in very
cold conditions, and T-12HO bulbs operate well in those environments. The T12VHO, 110 watt Very High Output lamps make this fixture an ideal
replacement for 400 watt metal halide surface mount fixtures in hazardous location areas requiring Class 1 Division 1 rated lights. *However, the
110 watt T12VHO lamp configuration is not appropriate for paint spray booth applications.
Click here to see the Photometric report of the Larson Electronics EPL-48-2L light fixture fitted with T5HO lamps.
Click here to see the Photometric report of the Larson Electronics EPL-48-2L light fixture fitted with the T8 lamps.
Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by
tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at
the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the
light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown
above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the
opposite end of the fluorescent light.
Additional mounting options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown in the
photos above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or
conduit).
Made in USA Quality
Lamp Options
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and
F54-T5/850/HO – 54 watt, 5000 lumens per bulb, 20,000 hours life,
cost. Adjustable mounting brackets enable the operator to choose any
5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and
mounting angle for the fixture, where other models may only offer one
HPF .98 (Suffix –T5)
or three choices.
F48-T12/HO – 60 watt, 4050 lumens per bulb, 12,000 hours life, 4100
3. Fixture constructed of extruded corrosion resistant copper free
Kelvin color (Suffix –T12HO)
aluminum alloy.
F32-T8/841 – 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100
4. Over-sized, finned ballast housing for 800 mA fixtures provides more
Kelvin color (Suffix –T8)
heat dissipation and extends ballast life. Larger ballast box
T12HO with magnetic ballast for high heat configurations ("hot box"
accommodates High Output lamp ballasts. Ballast housing easily
explosion proof light applications) - 60 watt, 4050 lumens per bulbs accessible and externally mounted. Top and bottom covers secured
This bulb, ballast and wiring configuration is designed for applications
with nuts and bolts, instead of threaded through holes, which can be
to 165 degrees C.
damaged with dirt.
F48-T12-D-HO – 60 watt, 4050 lumens per bulb, 12,000 hours life,
5. Heavy gauge extruded aluminum reflectors with high gloss reflective
5100 Kelvin color (76 CRI - Color Rendition) - This specialty lamp is
finish. Resists dents and corrosion.
designed to mimic daylight conditions. For paint spray booth operators
6. A wrench is used to unscrew the end caps for relamping the fixture,
requiring a brighter color light than a traditional "cool white", this bulb
while other models require the “tap and knock off” method to loosen the
can be useful. (Suffix –T12DHO)
end cap.
F-48-T12-VHO – 110 watt, 7000 lumens per bulb, 12,000 hours life,
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp
4200 Kelvin color (Suffix –T12VHO) NOTE: the 110 watt lamps raise
protection.
the temperature rating from T5 to T6, which is NOT appropriate for
paint spray booth applications. The fixture is still Class 1 Division 1
rated, however, this fixture is no longer paint spray booth certified with
the 110 watt Very High Output lamp.
02/09/2015
Page: 294
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-48-2L Explosion Proof
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 1, Groups C and D
Dimensions: W-11.25" L-52" H-8.5 "
Class 1 Division 2, Group A,B,C,D
Weight: 65 Lbs
UL 595 Outdoor Marine Type (Saltwater)
Total Watts: 108watts*
UL 844, 924
Voltage: Universal 120V-277V 50/60 Hz
UL 1598 Marine Type
Total Lumens: STD-T5-HO Bulbs 10,000
Class II Division 1 and 2, Groups E,F,G
Lamp Life Expectancy: STD-T5-HO Bulbs 20,000 Hours
UL Certified Canadian Standards
Efficiency: STD-T5-HO Bulbs 92 Lumens per Watt
UL listed for Paint Spray Booths*
Ambient Operating Temp Range: -20 C to 80 C*
Operating Temp Rating: T6 Rated
Beam Angle: N/A
Special Orders- Requirements
Color Temp: varies with bulb choice
Contact us for special requirements
Mounting: Surface Standard - Pendant Optional
Phone: 1-214-616-6180
Wiring Hub: 1/2 inch threaded
Toll Free: 1-800-369-6671
U.L Approval: U.S Certificate Canada Certificate
Fax: 1-903-498-3364
View a Photometric Graph of the EPL-48-2L Bulb Types
E-mail: [email protected]
*Substitution of included standard bulbs for higher output lamps may
affect paint spray booth approval.
*Wattage totals are lamps only and may vary with different lamps.
*Temperatures above 65 degrees C will diminish ballast life from 5
years to 3 years)
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-EPL-48-2L;
Monthly...$132.00 USD
Weekly...$80.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase- Please note: 4 day lead time on this light.
02/09/2015
Page: 295
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- Manual
02/09/2015
Page: 296
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
400 Watt Metal Halide Light - Class 1 Division 2 Groups A~D - Wet Area Applications - RENTAL
Part #: RNT-HAL-TRN-400
Price: $690.00
Made in the USA
This unit is for rentals
The extremely durable Larson Electronics RNT-HAL-TRN-400 metal halide hazardous area light produces exceptional illumination from
a 400 watt metal halide lamp. Constructed of die cast aluminum and U.L. listed for wet areas, this metal halide fixture is a versatile and
ideal hazardous area lighting solution for areas where wet or damp environments may be encountered.
The durable RNT-HAL-TRN-400 metal halide light fixture is suitable for use in wet, outdoor environments, making it an ideal lighting solution for
industrial applications, boat docks, building exteriors and outdoor work areas. The lamp housing is weather resistant and constructed of pressure
cast copper free aluminum with an architectural bronze Polyester finish. The lens door is pressure-cast copper-free aluminum, and secured with
1/4” diameter captive stainless steel slotted hex-head bolts. This unit features an integral multi- tap ballast with a choice of of 120V, 208V, 240V,
or 277V connections. Also available is an optional and separate 480V configuration which requires a different ballast. Choose voltage options
when ordering.
The optical assembly includes thermal shock and impact resistant door glass with a pressure-cast copper-free aluminum door frame and heavy
duty, high temperature silicone rubber seal. The lamp socket is a specification grade mogul base porcelain unit with heavy gauge brass, a nickelplated, double lamp-grip screw shell and spring-loaded center contact. The reflectors are a double segment compound parabolic design with
Alzak® finish for maximum efficiency.
Mounting choices include:
(1) Yoke mount: zinc plated steel yoke with architectural bronze Polyester finish.
(2) Poletop mount: built-in slip-fitter for internal wiring. Adjustable laterally and vertically. Slip fits 2” or 2 1/2” pipe. Architectural bronze Polyester
finish.
This hazardous area light is rated U.L. standard 844 and 1598 compliant, approved Class 1 Division 2, Groups A,B,C,D, and functionable in an
environment of up to 180 degrees celcius. The integral multi-tap ballast is protected within the weatherproof housing and has primary electrical
taps for 120V, 208V, 240V, and 277V. This lamp is suitable for use in areas were flammable gases and vapors are present occasionally.
This 400 watt metal halide light is highly durable, produces approximately 45,000 lumens in a wide flood pattern, and can operate in ambient
temperatures to 180 degrees C and will not produce temperatures greater than 325 degrees C. All hardware on this unit is resistant to rain, snow,
salt water and corrosive chemicals. The heavy duty design and attractive finish of this fixture makes it a popular choice for outdoor applications
regardless of whether the locations are designated hazardous or not.
Bulb is not included with with this fixture.
02/09/2015
Page: 297
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Here for Notes on Wiring this Light
Make all electrical connections in accordance with the National Electrical Code and any applicable local code requirements. Verify that supply
voltage is correct by comparing it to nameplate. Three-conductor No. 14 cable (with 90° C minimum insulation) is recommended for making
electrical connections. Wiring is accomplished through the wiring box provided on the fixture. The box is provided with a size 3/4-in. NPT
threaded conduit opening. Wiring methods must comply with NFPA 70 (The National Electrical Code), Article 501 for Class I, Division 2
Hazardous (Classified) Locations. To get inside the unit, open the door, loosen the (2) screws holding the reflector and remove the reflector.
Verify the correct supply voltage and lamp wattage. Bulb not included.
Made in the USA Quality
Metal Halide Benefits
1. High Efficiency Metal Halide lamp.
2. Approximately 100-115 Lumens per Watt
3. Rugged Pressure Cast Aluminum Housing.
4. Thermal Shock and Impact Resistant Glass Lens Door.
5. Heavy Duty Door Gasket.
6. Socket: Mogul Base heavy gauge brass, nickel-plated double lampgrip screw shell .
7. Low Maintenance.
8. Slip Fit Pole Mount or Zinc Plated Yoke Mount.
9. Heavy Duty High Heat Silicone Door Glass Seal.
10. Architectural Bronze Polyester Finish.
02/09/2015
1. Long lamp life.
2. High efficiency and low amp draw after initial startup.
3. High durability and reliability.
4. High output and very good color rendering.
5. Vibration and shock resistant.
6. Low maintenance.
Page: 298
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-HAL-TRN-400
U.L Ratings
Lamp Type: Metal Halide
Class I, Division 2 Groups A, B, C, D
Dimensions: 17 " W X 7" D X 20 3/4" H w/Yoke Mount
UL Standard 1598 (supersedes UL Standard 57)
Watts: 400
UL Standard 844
Lumens Per Watt: 100-115 Approx.
Class I Div. 2 UL Standard 1598A
Voltage: 120V, 208V, 240V, or 277V
/480V Optional
Lighting Configuration: Flood Pattern
Max OP Temp 325°C (T1 NEC ID Number)
Operating temperature 325 degrees C (T1)
Mounting: Slip Fit Pole Mount or Zinc Trunnion
Weight: 29.7 lbs
U.L. Listing: Wet Area Approved
Total Lumens: Approx 45,000
Special Orders- Requirements
Wiring: 3/4 inch Threaded NPT Conduit Entrance
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
Click here to view the Explosion Proof Light Design Description
E-mail: [email protected]
Click here to view the Explosion Proof Light Temperature Rating
Table
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information
if required.
Rental Prices for the RNT-HAL-TRN-400;
Monthly...$345.00 USD
Weekly...$230.00 USD
Scroll Down to Purchase-
Links (Click on the below items to view):
- Dimensional Drawing
02/09/2015
Page: 299
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof LED Drop Light / Trouble Light -10 Watt LED - 50' Cord *RENTAL*
Part #: RNT-EHL-LED-7W-50-1523
Price: $665.20
Made in the USA
This unit is for rentals
The Larson Electronics RNT-EHL-LED-7W-50-1523 Explosion Proof LED Drop Light / Trouble Light is U.L.
approved Class 1 Division 1 & 2 Groups C and D - and is ideal for general work activities in hazardous locations
requiring explosion proof protection.
This 10 watt explosion proof LED work light from Larson Electronics produces 1050 lumens of bright white light and comes
complete with 50 feet of explosion proof cord. The RNT-EHL-LED-7W-50-1523 LED drop light has no ballast and the
housing is constructed of non sparking aluminum which results in a very lightweight unit. This hazardous location hand
lamp is Class 1, Division 1 and 2 and Class 2 Division 1 and 2 hazardous location environment approved. This explosion
proof LED drop light is ideal for hazardous work areas where a ready source of easily managed lighting is desired.
These particular units also come standard with an explosion proof twist-lock plug. The plug is Class I, Division I & II and
Class II, Division I & II rated. In order to complete the seal, operator must take twist-lock explosion proof plug and connect
to an explosion proof outlet receptacle. Connecting to a regular 120VAC outlet renders the plug useless and should only be
done when connecting the light outside of the explosion proof environment.
02/09/2015
Page: 300
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
100 Watt Incandescent Bulb
Click Photos to Enlarge
With the EXP-LED-7W-50
Click Photos to Enlarge
Click Photos to Enlarge
Click Photos to Enlarge
This 10 watt LED drop light is suitable for use in areas where petrochemical vapors and various dusts are present and
projects 1050 lumens of light, which is twice the lumens per watt output of a 100 watt incandescent bulb. This unit is rated
Class 1, Division 1 and comes complete with 50’ of SOOW 16/3 AWG cord ending in a 5-15 straight blade plug.
This hand lamp has a high efficiency LED bulb that requires no ballast, so the operator doesn't need to drag the ballast
housing around. This can be particularly annoying when the transformer becomes entangled in the cord. This explosion
proof LED hand light operates on standard 120-277 Volts AC Hz for US voltages. The light produced by this unit has a
6000k color temperature, which is much sharper and whiter than the light produced by incandescent lamps. The light
produced by this lamp is ideal for close work and inspection activities where good contrast and true color representation is
needed. The LED lamp in this unit runs much cooler than incandescent or flourescent lamps, resulting in a lamp housing
that remains cool to the touch and eliminates the accidental burns often encountered with incandescent drop lights.
Made in USA Quality
Lamp Features
1. Federal Spec Cord.
2. Explosion Proof.
10 watt LED light produces 1050 lumens
3. 10 Watt 1050 Lumen LED Lamp.
4. Rugged fabricated steel and cast aluminum construction.
5. Blue and Gray paint finish.
6. UL Class1 Div1 Class 2 Div1
7. 120 Volt Operation
8. SOOW cable.
9. Aluminum Hook for Convenient Placement.
10. Explosion Proof Plug -Class I, Div. I & II
-Class II, Div. I & II
02/09/2015
Non-sparking aluminum housing
50,000 hour LED Lamp
Molded rubber bumper guard
Annealed glass tube shields prevent shattering
Integrated lamp shock absorbers prevent drop damage
Swivel hook for hanging and hands free operation
Explosion proof cord
Explosion Proof Twist-Lock Plug
Page: 301
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EHL-LED-7W-50-1523
U.L. Ratings
UL Listing: United States
Class 1, Division 1 & 2 for Groups C, D
Dimensions:L-16.5 " Dia-5"
Class II, Division 1 and 2 for Groups F, G
Lumens: 1050
Total Watts:10 watts
Voltage: 120-277VAC
Color Temp: 6000k
Mounting: Aluminum Hook
Wiring: 50' SOOW Cord With 1523 Explosion Proof Plug
Lamp Type:: LED
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals are like
orders until the product is returned. This means, we will charge the customer for the product total and credit back the
difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from
the destination. Please contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EHL-LED-7W-50-1523;
Monthly...$187.50 USD
Weekly...$125.00 USD
Scroll Down to Purchase- Same Day Shipping on This Light!
02/09/2015
Page: 302
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
02/09/2015
Page: 303
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 1 - Hi-Res Image 2 - Hi-Res Image 3 - Hi-Res Image 4 - Hi-Res Image 5 -
02/09/2015
Page: 304
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Hazardous Area Fluorescent Light - Class 1 Division 2 Groups A~D - 12/24 Volt - RENTAL
Part #: RNT-HAL-48-2L-LV
Price: $650.00
Made in the USA
This unit is for rental contracts.
The Larson Electronics RNT-HAL-48-2L-LV Hazardous Area Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 2
Groups A, B, C and D - UL 1598A listed, has a T4C temperature rating and ideal for open air hazardous locations where flammable
chemical/petrochemical vapors may be occassionally encountered. This low voltage version of the HAL-48-2L is designed to run on
12/24 volts DC.
The RNT-HAL-48-2L-LV fixture is a 4 foot long, 2 lamp, UL listed Class 1 Division 2 Groups A, B, C and D hazardous area fluorescent light and a
good choice for use in applications requiring a low voltage source of illumination. This fixture is T4A temperature rated and comes standard with
F32-T8 bulbs. The lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of
copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish.
This fixture is designed to operate on 12 or 24 volts DC only and is U.L. 595 and UL 1598A Marine Type approved for use marine environments.
The HAL-48-2L-LV provides operators in hazardous locations with a reliable and affordable low voltage lighting solution for open areas where
flammable chemicals and vapors my occasionally be present.
02/09/2015
Page: 305
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Page: 306
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
NOTE ON LAMPS: This fixture comes equipped with F32-T8/841 32 Watt lamps producing 2950 lumens per bulb, 24,000 hours of service life
and a 4100 Kelvin color. The HAL-48-2L-LV has an electronic ballast and only works with 12 or 24 volt DC lamps. Please specify your desired
voltage option from the drop down menu below when ordering..
Standard Surface Mount Brackets:
Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on
either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are
two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed
from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Mounting brackets are removable. A single through
hole enables the operator to install the light to any surface. A sliding bracket mount kit is also available in the optional accessories menu below
for retrofitting this fixture into existing mounting locations.
Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical
manufacturing, Waste treatment plants, Gas processing plants.
Made in USA Quality
Lamp Options
1. Each unit dialectically tested.
N/A
2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture, where other models may only offer one
or three choices.
3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.
4. Relamping done via 4 turn latches, which enable the operator to
unlatch the hinged door and access the lamps.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.
6. 3/4 inch, threaded access hole for wiring conduit.
7. Units can be wired end to end in series.
Click here to see the LED version of this fixture
02/09/2015
Page: 307
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-HAL-48-2L-LV Hazardous Area
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 2, Groups A, B, C, D
Dimensions: W-7" L-49 3/4 " H-6 1/8 "
UL 595 Outdoor Marine Type (Saltwater)
Weight: 33 Lbs
UL 1598A Marine Type
Total Watts: 64 watts*
California Title 24 Compliant
Voltage: 12-24 Volts DC
Total Lumens: STD-F32-T8/841 Bulbs 5,900
Lamp Life Expectancy: STD-F32-T8/841 Bulbs 20,000 Hours
Efficiency: STD-F32-T8/841 Bulbs 92 Lumens per Watt
Operating Temp Range: T4A Rated -30 C to 70 C
Beam Angle: N/A
Special Orders- Requirements
Color Temp: 4100K-
Contact us for special requirements
Mounting: Bracket Standard - Pendant Optional
Toll Free: 1-800-369-6671
Wiring Hub: 3/4 inch threaded
Intl: 1-903-498-3363
U.L Approval: U.S Certificate Canada Certificate
E-mail: [email protected]
Minimum Operating Temp: -30 C
Maximum Case Temp: 90 C
Hal-48-2L Dimensional Drawing
*Wattage totals are lamps only and may vary with different lamps
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us Toll Free: at 1-800-369-6671 or (903)
498-3363 for further information if required.
Rental prices for the HAL-48-2L-UV-8-REN;
Monthly...290.00 USD
Weekly...193.33 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Deductions will also be made for
shipping, repairs, and excessive cleaning, if needed.
Scroll Down to Order- Please note: 2 day lead time on this light.
02/09/2015
Page: 308
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- EASM
02/09/2015
Page: 309
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Class 1 Division 1 300 Watt Incandescent Light - Vapor Proof - Ceiling Mount - 120 Volts - RENTAL
Part #: RNT-EPL-CM-300W-120V
Price: $650.00
MADE IN THE USA
Explosion Proof Light. UL rated Class 1 Division 1, Groups C,D with IP 67 rating.
This is a Rental Unit.
Safety Ratings:
Class 1, Groups C and D - T3C temperature rating
Class II, Groups E and F - T3 temperature rating
Class III, Groups E, F and G - T3C temperature rating
IP67 (water proof) rating
Click here to learn more about National Electrical Code Hazardous Location Classifications
Lamp:
300 Watt incandescent lamp.
Paint Spray Booth Approved (150W approved).
Housing:
Heavy cast aluminum.
Unit withstands 1490 lbs. per square inch hydrostatic pressure during UL testing
Mounting:
Ceiling mount for vertical installation.
Wiring:
Wiring is factory sealed. Inspection hole provides easy access to splice compartment
02/09/2015
Page: 310
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Globe:
Impact and heat resistant clear prismatic design affords excellent light control. Ships with cast aluminum guard (not shown).
Finish:
Chip and fade resistant polyester powder coating.
Reflectors:
Heavy gauge aluminum with highly reflective white acrylic finish
Socket:
Medium base glazed porcelain. Leads pass through sealing compound that separates lamp chamber from wiring compartment. Heavy
gauge nickel plated copper components. Spring loaded center.
Hub Size:
3/4" Hub
Hub count:
4
Weight:
12 lb / 5.4 kg
Voltage:
120 Volts, 60hz AC
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us
at (903) 498-3363 for further information if required.
Rental prices for the RNT-EPL-CM-300W-120V;
Monthly...109.00 USD
Weekly...65.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs,
and excessive cleaning, if needed.
02/09/2015
Page: 311
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 312
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof 100 Foot SOW Extension Cord - 15 amp continuous service - RENTAL
Part #: RNT-EPEXC-100
Price: $650.00
Made in the USA
Larson Electronics 100' Explosion Proof Extension Cord. Class1 Dvision 1 and Class2 Division 1.
This Unit Is For Rentals
The Larson Electronics RNT-EPEXC-100 Explosion Proof extension cord allows operators to safely extend the range of their explosion proof light
or equipment cords beyond the boundaries of the hazardous work area. These units are constructed of 100 feet of 16/3 SOOW explosion proof
cord rated at 15 amps of continuous service. The cord is chemical and abrasion resistant and comes with an explosion proof receptacle installed
on one end and an explosion proof plug installed on the other end. We also include an extra matching plug for operators to attach to their
equipment which allows them to avoid any issues with plug and receptacle equipment compatibility with this cord.
The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug
and twist until it locks into place. This ensures a safe seal is made before any sparks from electrical contact can take place. To ensure the
highest safety, operators should make connections outside of the hazardous area.
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Page: 313
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Inter-Compatibility: The plugs on these cords will work with non-explosion proof standard receptacles (NEMA 5-15R, 5-20R, or 6-20R) and
standard wall outlets, however, they must be used with explosion proof rated outlets to retain their explosion proof rating. The included plugs and
receptacle are cross-interchangeable with Crouse Hind™ part# ENPENP5151 plugs and receptacles and Hubble-Killiark part# UGP-15231
ACCEPTOR® plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible
manufacturer changes we cannot guarantee interchangability although we have made every effort to ensure cross compatibility correctness.
Suggested Applications: Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations
Where Combustible Dust is Present.
Specifications / Additional Information
RNT-EPEXC-100 Explosion Proof Extension Cord
Plug / Outlet Certifications
Amp Rating: 15 amp Continuous Service
Class 1 Div 1 Groups C and D
Dimensions: Cord length-100 Feet Plug-2.78"-L 1.75"-W
Class 2 Div 1 Groups E, F and G
Configuration: 3 Pole 2 Wire
Suitable Plug Cable Diameter: .538” to .639”
Receptacle Specs:
Configuration: 3 Pole 2 Wire
Materials: Copper Free Aluminum
Dimensions: 3"-W X 5.69"-D X6.13"-H
Mating Plugs: ****EPP-15A, EPP-20-A****
Special Orders- Requirements
Finish: Epoxy Powder Coat
Contact us for special requirements
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
U.L. Certification
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-EPEXC-100;
Monthly...139.00 USD
Weekly...85.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
02/09/2015
Page: 314
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Hazardous Location Area Fluorescent Light - 2', 2 lamps - Low Voltage - Class I, Div. II
Part #: HAL-24-2L-LV
Price: $570.00
Made in the USA
The Larson Electronics HAL-24-2L-LV Hazardous Area Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 2
Groups A, B, C and D - UL 1598A listed, has a T4A temperature rating and ideal for open air hazardous locations where flammable
chemical/petrochemical vapors may be occassionally encountered. This low voltage unit is designed to operate on 12/24 volt current.
The HAL-24-2L-LV fixture is a 2 foot long, 2 lamp, UL listed Class 1 Division 2 Groups A, B, C and D hazardous area fluorescent light and a good
choice for use in applications where low voltage illumination is required or preferred. This fixture is T4A temperature rated and comes standard
with F17-T8 bulbs. The lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is
constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss
reflective finish. This fixture is designed to operate on 12 or 24 volt current only and is U.L. 595 and UL 1598A Marine Type approved for use
marine environments. The HAL-24-2L-LV provides operators in hazardous locations with a compact, reliable and low voltage lighting solution for
open areas where flammable chemicals and vapors my occasionally be present.
02/09/2015
Page: 315
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Page: 316
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
NOTE ON LAMPS:The HAL-24-2L-LV has an electronic ballast and works only with bulbs intended for 12 or 24 Volt current.
Standard Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is
set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt
hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or
wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Mounting
brackets are removable. A single through hole enables the operator to install the light to any surface. Sliding bracket mounts are available in the
related products section which allow operators to use existing mounting setups.
Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical
manufacturing, Waste treatment plants, Gas processing plants.
Made in USA Quality
Lamp Options
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture, where other models may only offer one
or three choices.
3. Fixture constructed of extruded corrosion resistant copper free
N/A
aluminum alloy.
4. Relamping done via 4 turn latches, which enable the operator to
unlatch the hinged door and access the lamps.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.
6. 3/4 inch, threaded access hole for wiring conduit.
7. Units can be wired end to end in series.
02/09/2015
Page: 317
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
HAL-24-2L-LV Hazardous Area
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 2, Groups A, B, C, D
Dimensions: W-7" L-25.5 " H-6 1/8 "
UL 595 Outdoor Marine Type (Saltwater)
UL 1598A Marine Type
Weight: 17 Lbs
California Title 24 Compliant
Total Watts: 34 watts*
Temp Rating: T4A
Voltage: 12 - 24 Volts
Total Lumens: STD-T8 Bulbs 2,400
Lamp Life Expectancy: STD-T8 Bulbs 24,000 Hours
Efficiency: STD-T8 Bulbs 70 Lumens per Watt
Operating Temp Range: T4A Rated -30 C to 70 C
Minimum Operating Temp: -30 C
Maximum Case Temp: 90 C
Beam Angle: N/A
Special Orders- Requirements
Color Temp: 3500K-
Contact us for special requirements
Mounting: Bracket Standard
Toll Free: 1-800-369-6671
Wiring Hub: 3/4 inch threaded
Intl: 1-903-498-3363
U.L Approval: U.S Certificate Canada Certificate
E-mail: [email protected]
*Wattage totals are lamps only and may vary with different lamps.
Scroll Down to Purchase- Please note: 2 day lead time on this light.
Links (Click on the below items to view):
- Dimensional Drawing
- IES
02/09/2015
Page: 318
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Class 1 Division 2 Fluorescent LED Light for Corrosion Resistant Requirements (Saltwater) - RENTAL
Part #: RNT-HALP-48-2L-LED
Price: $619.00
Made in the USA
The Larson Electronics RNT-HALP-48-2L-LED Hazardous Area Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division
2 Groups A, B, C and D - UL 1598A listed and is specifically designed to handle the rigors of wet and corrosive marine environments.
This unit is for rental contracts.
The RNT-HALP-48-2L-LED hazardous area fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where
corrosion resistance is critical to equipment longevity and safety. This Class 1 Division 2 rated fixture is constructed of non-corrosive materials
including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Corrosion
resistant stainless steel latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and
water intrusion. This fixture is UL 844 rated and Class 1 Division II, Groups A, B, C, D approved. The RNT-HALP-48-2L-LED also carries a UL
1598A outdoor marine rating and meets US Coast Guard specifications. This lamp offers the extreme durability, high efficiency and long life of
high power LEDs in a proven hazardous location fixture design.
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Click Photo to Enlarge
Page: 319
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
The RNT-HALP-48-2L-LED is equipped with Larson Electronics’s specially designed LED T-series bulbs which produce 15% more foot candles
of illumination at 8 feet as compared to standard T8 lamps when measured with an Extech light meter. The 24 watt LED lamps produce more
illumination than standard T8 bulbs, but draw only 3/4 of current. The RNT-HALP-48-2L-LED is multi-voltage (not multi-tap) and works on the
following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ.
NOTE ON LAMPS: All hazardous location lights are shipped with bulbs. Two 24 watt LED tube bulbs come equipped with this fixture with a
color temperature of 5300K and a 50,000 hour life span. The RNT-HALP-48-2L-LED has an electronic multi-voltage ballast and works with 120
Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ and 277 Volts 60 HZ.
Standard Flange Brackets: Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any
surface. The mounts provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps
that protrude on each side of the fixture. The mounting holes are 36 9/16 inches on center apart along the top of this hazardous location light.
The mounting holes are 7 inches on center across the top of the light.
Suggested Applications: The RNT-HALP-48-2L-LED is designed for marine, wet, damp locations where corrosion resistant fluorescent lights
are required. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas,
processing plants and marine loading docks.
Made in USA Quality
Superior LED Benefits
1. 50,000 hour lifespan.
2. Can SAVE 50% or more on energy.
1. Each unit dialectrically tested.
3. Qualifies retrofit projects for financial incentives, including utility
2. Fixture arrives assembled and lamped to reduce installation time and rebates, tax credits and energy loan programs.
cost. Flange type stainless steel mounts attached at each end of the
4. Reduces energy use and prolongs life-spans of peripheral cooling
fixture enables it to be simply secured to any surface.
3. Fixture housing constructed of glass fiber reinforced polyester.
units (A/C, refrigeration)
5. 100% recyclable.
4. No ballast box. No ballast to replace. We simply run the black wire
to one end of the bulb and white wire to the other.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
5. Relamping done via 6 stainless steel snap locking latches which
enables the operator to remove the door and access the lamps.
8. Qualifies buildings for LEED and other sustainable business
certifications.
6. Lamp cover-diffuser constructed of high impact acrylic for corrosion
resistance and lamp protection. .
9. Bright, even light maintains consistent color over time.
10. Instant on/off – No flickering, delays or buzzing.
7. 3/4 inch, threaded access hole for wiring conduit.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
02/09/2015
Page: 320
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-HALP-48-2L-LED Hazardous Area
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 2, Groups A, B, C, D
Dimensions: W-8.25 " L-52 " H-7"
UL 844
Weight: 8 Lbs
UL 1598A Marine Type (Salt water)
Total Watts: 48 watts
Voltage: 120V-60hz 220V-50hz 240V-60hz 277V-60hz
Lamp Life Expectancy: LED T-Series 50,000 Hours
Efficiency: LED T-Series 90 Lumens per Watt
Operating Temp Range: T4A Rated -30 C to 85 C
Minimum Operating Temp: -30 C
Maximum Case Temp: 90 C
Beam Angle: 150 degrees
Color Temp: 5300K-
Special Orders- Requirements
Mounting: Flange type stainless steel
Contact us for special requirements
Wiring Hub: 3/4 inch threaded
Toll Free: 1-800-369-6671
Warranty: YES- 3 Years with purchase*
Intl: 1-903-498-3363
U.L Approval: U.S Certificate Canada Certificate
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us Toll Free: at 1-800-369-6671 or (903)
498-3363 for further information if required.
Rental prices for the RNT-HAL-48-2L-LED;
Monthly...109.00 USD
Weekly...81.25 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Deductions will also be made for
shipping, repairs, and excessive cleaning, if needed.
Scroll Down to Order-
02/09/2015
Page: 321
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- SpectrumChart
- Hi-Res Image 1
02/09/2015
Page: 322
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 2
- Hi-Res Image 3
- Hi-Res Image 4
02/09/2015
Page: 323
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Fluorescent Fixture - 2', 2 Lamps - Multi-Voltage - Class I, Div. I - RENTAL
Part #: RNT-EPL-24-2L
Price: $597.89
Made in the USA
This Unit is for Rentals
The Larson Electronics RNT-EPL-24-2L Explosion Proof Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 1,
Class II Division 1 and ideal for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to
exist.
The RNT-EPL-24-2L fixture is a 2 foot long, 2 lamp, UL listed Class 1 Division 1 and Class II Division 1&2 explosion proof fluorescent light and
an ideal choice for use in applications where space is at a premium. This T6 temperature rated fixture comes standard with F24-T5/HO lamps
and is available with a variety of lamp options which are listed below. The lamps are protected by heat and impact resistant Pyrex tubes and the
fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high
gloss reflective finish. This fixture is multi-voltage capable and is U.L. approved for use in paint spray booths.
The EPL-24-2L provides operators in hazardous locations with a compact, reliable and affordable lighting solution that provides the best
explosion proof protection available without sacrificing light quality or fixture durability.
Click Here to Enlarge
Click Here to Enlarge
02/09/2015
Click Here to Enlarge
Page: 324
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
NOTE ON LAMPS: We offer a choice of bulbs with all of our explosion proof fluorescent fixtures. We standardize on the T-5HO bulbs mostly for
their longevity and high output. However, many of our customers, including Naval bases, shipyards, oil rigs and petrochemical processing plants
operate in very cold conditions and T-12HO bulbs operate well in those environments. The T12VHO, 110 watt Very High Output lamps make this
fixture an ideal replacement for 400 watt metal halide surface mount fixtures in hazardous location areas requiring Class 1 Division 1 rated lights.
*However, the 110 watt T12VHO lamp configuration is not appropriate for paint spray booth applications.
Additional mounting options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown in the
photos above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or
conduit).
Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by
tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at
the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the
light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown
above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the
opposite end of the fluorescent light.
Made in USA Quality
Lamp Options
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture, where other models may only offer one
or three choices.
3. Fixture constructed of extruded corrosion resistant copper free
aluminum alloy.
4. Over-sized, finned ballast housing for 800 mA fixtures provides more
heat dissipation and extends ballast life. Ballast housing easily
accessible and externally mounted. Top and bottom covers secured
with nuts and bolts, instead of threaded through holes, which can be
damaged with dirt.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture,
while other models require the “tap and knock off” method to loosen the
end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp
protection.
02/09/2015
F24-T5HO – 2000 lumens per bulb (4000 lumens total), 20,000 hours
life, 5000 Kelvin color, CRI 85 RHA-UNV-254-LT5 Ballast is THD<10% and HPF
.98
F24-T12/HO – 1650 lumens per bulb (3300 lumens) 9,000 hours life,
4100 Kelvin color
F17-T8/HO – 1325 lumens per bulb (2650 lumens total), 24,000 hours
life, 4100 Kelvin color
F24-T12-D-HO – 1650 lumens per bulb (3300 lumens), 9,000 hours
life, 5100 Kelvin color (76 CRI - Color Rendition) - This specialty lamp
is designed to mimic daylight conditions. For paint spray booth
operators requiring a brighter color light than a traditional "cool white",
this bulb can be useful.
Note: There is some confusion on T-12 bulbs. There are 2 types of T12 bulbs. The older T-12 bulbs ran on magnetic ballasts. Those
ballasts have vanished and the T-12 bulbs that work with those ballasts
are vanishing as well. All of our explosion proof fluorescent fixtures use
electronic ballasts and the F48-T12/HO bulb is widely available and low
cost to replace. We use Philips bulbs and they plan to continue the T12 series indefinitely, as does GE. In fact, GE is now selling an
electronic ballast replacement for T12 based fixtures that formerly
operated with their magnetic ballasts.
Page: 325
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-24-2L Explosion Proof
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 1, Groups C and D
Dimensions: W-11.25" L-27.5" H-8.5 "
Class 1 Division 2, Group A,B,C,D
Weight: 55 Lbs
Class II Division 1- 2, Groups E,F,G
Total Watts: 48 watts*
UL 844, 924
Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz
UL 1598 Marine Type
Total Lumens: STD-T5-HO Bulbs 4000
UL 595 Outdoor Marine Type (Saltwater)
Lamp Life Expectancy: STD-T5-HO Bulbs 20,000 Hours
UL listed for Paint Spray Booths*
Efficiency: STD-T5-HO Bulbs 83 Lumens per Watt
Operating Temp Range: T6 Rated
Beam Angle: N/A
Special Orders- Requirements
Color Temp: 4100K-
Contact us for special requirements
Mounting: Bracket Standard - Pendant Optional
Phone: 1-214-616-6180
Wiring Hub: 1/2 inch threaded
Toll Free: 1-800-369-6671
U.L Approval: U.S Certificate Canada Certificate
Fax: 1-903-498-3364
View a Photometric Graph of the EPL-48-2L Bulb Types
E-mail: [email protected]
*Wattage totals are lamps only and may vary with different lamps.
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-EPL-24-2L;
Monthly...$125.00 USD
Weekly...$75.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase- Please note: 2 day lead time on this light.
Links (Click on the below items to view):
- Dimensional Drawing
02/09/2015
Page: 326
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Aluminum Fluorescent Drop Light - 15 Watt - Class I, Div. I - 50' Cord - RENTAL
Part #: RNT-EPL-FL1524-50
Price: $587.00
Made in the USA
This unit is for rentals
The Larson Electronics RNT-EPL-FL1524-50 Hazardous Area Fluorescent Work light is U.L. approved Class 1 Division1 Groups C and
D and Class II Division 1 groups E, F and G. With a 2 foot long 15 watt fluorescent lamp, this hazardous location light provides a very
wide flood beam which can be suitable for paint spray booth inspection or general portable lighting in confined spaces like fuel tanks
or grain storage areas.
This 2 foot long 15 watt explosion proof fluorescent work light from Larson Electronics.com comes complete with an explosion proof cord and
inline ballast that reduces lamp head weight. This hazardous location area light features a rugged, non-sparking aluminum casing and unique rod
cage and produces cool, glare-free, shadowless light that maximizes safety in hazardous locations and maximizes lighting efficiency with built-in
metal reflectors. Fluorescent lights are popular in paint prep, painting and post-paint inspection operations, due to the even white color light
produced.
The light output, color and evenness of coverage make fluorescent lights also popular for a wide variety of close quarter work and inspection
activities.
02/09/2015
Page: 327
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
40' Container Dark
Click Photos to Enlarge
Container With EPL-FL1524-50
Click Photos to Enlarge
Click Photos to Enlarge
Click Photos to Enlarge
The 15-watt fluorescent lamp used in this unit provides as much illumination as higher-wattage incandescent lamps without the associated heat,
reducing the chances of accidents or burns. This lamp has an inline isolated ballast which reduces lamp head weight, an impact resistant tube
shield with specially designed annealed glass and an aluminum hook for easy overhead mounting. The light is designed so that the operator can
easily replace the lamp or starter if required. The 50 foot long Class 1, Division 1 rated SOOW 16/3 AWG cord and explosion proof slip-ring
housing meets federal specification JC-580A. This explosion proof fluorescent hand lamp can be used within hazardous locations rated Class1
Division 1 and II making it ideal for hazardous work areas where a ready source of easily managed lighting is desired.
Made in USA Quality
Lamp Features
1. Federal Spec JC-580A Cord.
2. Indoor or outdoor use.
3. 35 amp, 1-4 conductors 600 Volt, 5-12 conductors 250 Volt.
4. Rugged fabricated steel and cast aluminum construction.
5. Unique lamp cage with rubber shock bumpers.
2 foot 15 watt fluorescent light
Non-sparking aluminum housing
Inline Ballast
Molded rubber bumper guards
Annealed glass tube shields prevent shattering
Integrated lamp shock absorbers prevent drop damage to bulbs
6. UL Listed 508 table 36.1 (3 and 4 conductor units with cable only)
7. Conforms to NEMA 9 and NEMA 4 (IP56)
Swivel hook for hanging and hands free operation
Explosion proof cord
8. SOOW cord.
02/09/2015
Page: 328
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-FL1524-50 Work Light
U.L. Ratings
UL Listing: United States
Class 1, Division 1 for Groups C, D
Dimensions: L-27 " Dia-3.25"
Class II, Division 1 Groups E, F, G
Weight: 14.5 lbs
Class III, Division 1
Total Watts: 15 watts
NEMA 9 and NEMA 4 (IP56)
Voltage: Stnd-120V-60hz
UL Listed JC-580A Cord
Lemp Lengths: 2 Foot
Mounting: Aluminum Hook
Wiring: 50' SOOW Cord
Lux: 9300 at Lens
U.L Approval: U.S Certificate
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the product
is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363
for further information if required.
Rental Prices for the RNT-EPL-FL1524-50;
Monthly...$181.00 USD
Weekly...$126.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to convert
their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs, and excessive
cleaning, if needed.
Scroll Down to Purchase-
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
02/09/2015
Page: 329
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Fluorescent Light - Class 1 Division II - Hazardous Location Areas - Multi-voltage *RENTAL*
Part #: RNT-HAL-48-2L
Price: $585.00
Made in the USA
This unit is for rentals
The Larson Electronics RNT-HAL-48-2L Hazardous Area Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 2
Groups A, B, C and D - UL 1598A listed, has a T4A temperature rating and ideal for hazardous locations where flammable
chemical/petrochemical vapors may be occassionally encountered.
The RNT-HAL-48-2L fixture is a 4 foot long, 2 lamp, UL listed Class 1 Division 2 Groups A, B, C and D hazardous area fluorescent light and a
good choice for use in applications where space is at a premium. This fixture is T4A temperature rated, comes standard with F54-T5/850/HO
bulbs, and is available with optional T12/HO and T8/841 bulbs.
The lamps are protected by an aluminum framed shatter and heat resistant clear acrylic lens secured with ten draw latches and the fixture is
constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss
reflective finish. This fixture is multi-voltage capable and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The
RNT-HAL-48-2L provides operators in hazardous locations with a compact, reliable and affordable lighting solution for open areas where
flammable chemicals and vapors may occasionally be present.
02/09/2015
Page: 330
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo Enlarge
Click Photo Enlarge
02/09/2015
Click Photo Enlarge
Page: 331
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
NOTE ON LAMPS: This fixture comes equipped with F54-T5/850/HO – 54 Watt lamps producing 5,000 lumens per bulb, a 5000 Kelvin color and
a 20,000 hour rated service life. We offer F48-T12/HO – 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin color and F32-T8/841 – 2950
lumens per bulb, 24,000 hours life, 4100 Kelvin color tubes as lamp options for this fixture. The RNT-HAL-48-2L has an electronic multi-voltage
ballast and works with 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ and 277 Volts 60 HZ.
Standard Surface Mount Brackets:
Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on
either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are
two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed
from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Mounting brackets are removable. A single through
hole enables the operator to install the light to any surface. Pendant mounts are available for operators who wish to mount these fixtures away
from the ceiling surface.
Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical
manufacturing, Waste treatment plants, Gas processing plants.
Made in USA Quality
Lamp Options
F54-T5/850/HO – 54 Watt, 5000 lumens per bulb, 20,000 hours
life, 5000 Kelvin color
1. Each unit dialectrically tested.
F48-T12/HO – 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin
2. Fixture arrives assembled and lamped to reduce installation time and color
cost. Adjustable mounting brackets enable the operator to choose any F32-T8/841– 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin
mounting angle for the fixture, where other models may only offer one color
or three choices.
3. Fixture constructed streamlined ribbed corrosion-resistant, copper
F48-T8/HO - 48 watt, 4000 lumens per bulb, 18,000 hours life, 4100
Kelvin color (Suffix -T8HO)
free extruded aluminum body for better hear dissipation and extended
ballast life.
4. Aluminum extruded lens frame for greater strength
5. Relamping done via 10 draw latches, which enable the operator to
unlatch the lens and access the lamps.
6. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.
7. 3/4 inch, threaded access hole for wiring conduit.
8. Units can be wired end to end in series.
Click here to see the LED version of this light fixture
02/09/2015
Page: 332
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-HAL-48-2L Hazardous Area
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 2, Groups A, B, C, D
Dimensions: W-7" L-49 3/4 " H-6 1/8 "
UL 595 Outdoor Marine Type (Saltwater)
Weight: 33 Lbs
UL 1598A Marine Type
Total Watts: 108 watts*
California Title 24 Compliant
Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz
Total Lumens: STD-T5-HO Bulbs 10,000
Lamp Life Expectancy: STD-T5-HO Bulbs 20,000 Hours
Efficiency: STD-T5-HO Bulbs 92 Lumens per Watt
Operating Temp Range: T4A Rated -30°C to +70°C
Beam Angle: N/A
Color Temp: 5000K- T5-HO Bulbs
Mounting: Bracket Standard - Pendant Optional
Special Orders- Requirements
Wiring Hub: 3/4 inch threaded
Contact us for special requirements
U.L Approval: U.S Certificate Canada Certificate
Toll Free: 1-800-369-6671
Minimum Operating Temp: -30 C
Fax: 1-903-498-3364
Maximum Case Temp: 90 C
E-mail: [email protected]
*Wattage totals are lamps only and may vary with different lamps.
*Temperatures above +65°C will diminish ballast life from 5 years to 3
years
Rental Prices for the RNT-HAL-48-2L;
Monthly...$55.20 USD
Weekly...$72.14 USD
Daily...$24.06 USD Subtract rental cost from total cost for the amount
that will be credited back to customer upon return of product. Customer
can choose to convert their rental to a purchase at any time during the
rental period. When returned, deductions will also be made for
shipping, repairs, and excessive cleaning, if needed.
Scroll Down to Purchase- Please note: 2 day lead time on this light.
02/09/2015
Page: 333
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
02/09/2015
Page: 334
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Hi-Res Image 1
- Hi-Res Image 2
- Hi-Res Image 3
- Hi-Res Image 4
- Hi-Res Image 5
- Hi-Res Image 6
02/09/2015
Page: 335
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Class 1 Division 2 Fluorescent Light - 4 foot 2 lamp - UV bulbs - 8 foot cord - RENTAL
Part #: RNT-HAL-48-2L-UV-8
Price: $580.00
02/09/2015
Page: 336
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Made in the USA
The Larson Electronics RNT-Hal-48-2L-UV-8 Hazardous Location UV Fluorescent Light Fixture is U.S./Canada U.L.
approved Class 1 Division 2 . This fixture uses a special ballast and bulb combination to produce ultraviolet light.
This lamp is T4C rated and ideal for hazardous locations where UV lamps are used to cure coatings and adhesives
or as germicidal agents. This unit is for rental contracts.
The RNT-Hal-48-2L-UV-8 fixture is a 4 foot long, 2 lamp, UL listed Class 1 Division 2 hazardous location fluorescent light
that emits light in the ultraviolet spectrum. The RNT-Hal-48-2L-UV-8 can be configured to produce UVA or UVC light which
is typically used for curing coatings or adhesives, pest management or in germicidal applications. The lamps are protected
by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of copper free
aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective
finish. This fixture, like our other UV lights operates on 120 VAC only. The RNT-HAL-48-2L-UV-8 is equipped with an 8 foot
cord and provides operators in hazardous locations with a reliable and durable UV lighting solution for open areas where
flammable chemicals and vapors may occasionally be present.
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Page: 337
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Ultraviolet Wavelength Options: Ultraviolet A Wavelength produces a longer wave between the 400nm - 315nm
spectrum.
Ultraviolet C wavelength is reduced exceptionally. Some refer to this wave as the 'germicidal' wave. The Ultraviolet C
Wavelength ranges from 280nm - 100nm.
Standard Surface Mount Brackets: Each L bracket is cinched to the bracket mounting peg on each side of the light. The
angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw.
The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the
light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets
by loosening the cap screws that hold the bracket to the mounting peg. Mounting brackets are removable. A single through
hole enables the operator to install the light to any surface. A sliding bracket mount is available so operators can retrofit this
LED light fixture to use the pre-existing mounting holes from other fluorescent fixtures. The sliding mount brackets are
available in the related items order section below..
Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing
plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.
Made in USA Quality
Lamp Options
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and
cost. Adjustable mounting brackets enable the operator to choose any
mounting angle for the fixture, where other models may only offer one or
three choices.
3. Fixture constructed of extruded corrosion resistant copper free aluminum
alloy.
4. Relamping done via 4 turn latches, which enable the operator to unlatch
the hinged door and access the lamps.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective
finish. Resists dents and corrosion.
6. 3/4 inch, threaded access hole for wiring conduit.
7. Units are capable of being wired end to end in series.
02/09/2015
Lamp options for UV fixtures are determined by UV range.
Operators can specify when ordering- UVA (-A part number suffix), and
UVC (-C suffix).
T8 bulbs designed for UV applications are used.
The bulb and ballast in our UV fluorescent fixtures are unique to UV
applications.
UVA(-A) 400nm - 315nm
UVC (-C) 280nm - 100nm
Page: 338
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-HAL-48-2L-UV-8 Hazardous Location Ultraviolet
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 2, Groups A,B,C,D
Dimensions: W-7" L-49 3/4" H-6 1/8 "
UL 595 Outdoor Marine Type (Saltwater)
Weight: 33Lbs
UL 1598 Marine Type
Total Watts: N/A*
UL approval- U.S/ Canada Standards
Voltage: 120V-60hz
Total Lumens: T8 UV Bulbs N/A
Lamp Life Expectancy: T8 UV Bulbs N/A
Efficiency: T8 UV Bulbs N/A
Operating Temp Range: T4C Rated
Beam Angle: N/A
Special Orders- Requirements
Color: Ultraviolet- 400nm-315nm, 280nm-100nm
Contact us for special requirements
Mounting: Bracket Standard Sliding Bracket Optional
Toll Free: 1-800-369-6671
Wiring: 8 Foot Cord
Intl: 1-903-498-3363
U.L Approval: U.S Certificate Canada Certificate
E-mail: [email protected]
Made in the USA
*Wattage totals vary with different lamp options.
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and Monthly
terms are available. Customer must pay shipping to and from the destination. Please contact us Toll Free: at 1-800-369-6671 or (903) 498-3363 for
further information if required.
Rental prices for the HAL-48-2L-UV-8-REN;
Monthly...290.00 USD
Weekly...193.33 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Deductions will also be made for shipping,
repairs, and excessive cleaning, if needed.
Scroll Down to Order- Please note: 2 day lead time on this light.
02/09/2015
Page: 339
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
02/09/2015
Page: 340
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Class 1 Division 2 Emergency Fluorescent Light - Corrosion Resistant - RENTAL
Part #: RNT-HALP-EMG-48-2L
Price: $570.00
Made in the USA
This Unit is for Rentals
The Larson Electronics RNT-HALP-EMG-48-2L Hazardous Area Fluorescent Light Fixture is U.S./Canada U.L.
approved Class 1 Division 2 Groups A, B, C and D - UL 1598A listed, has a T4C temperatue rating and is
specifically designed to handle the rigors of wet and corrosive marine environments. This fixture is equipped with
an added battery backup providing 90 minutes of emergency runtime.
The RNT-HALP-EMG-48-2L hazardous area fluorescent light fixture is designed for use in wet areas and saltwater-marine
environments where corrosion resistance is critical to equipment longevity and safety. This Class 1 Division 2 rated fixture
is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for
reliable sealing and an impact resistant acrylic diffuser. Corrosion resistant stainless steel latches secure the lamp cover to
the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This fixture is UL 844
rated and Class 1 Division II, Groups A, B, C, D approved. The HALP-EMG-48-2L also carries a UL 1598A outdoor marine
rating and meets US Coast Guard specifications.
This fluorescent light works, mounts and is wired like our HALP-48-2L explosion proof fluorescent light fixtures. The main
difference is that we add a battery backup unit that adds emergency light functionality to the fixture. This hazardous area
emergency light will run the standard UL suggested 90 minutes after power is lost. The light recharges the battery
once electrical power is restored. Standard configuration includes a single emergency ballast that will run a single lamp at
900 lumens for 90 minutes.
02/09/2015
Page: 341
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
NOTE ON LAMPS: This fixture comes equipped with F54-T5/841/HO – 54 Watt lamps producing 5,000 lumens per bulb, a
4100 Kelvin color and a 20,000 hour rated service life.
Standard Flange Brackets: Flange type stainless steel mounts attached at each end of the fixture enables it to be simply
secured to any surface. The mounts provide some shock absorbency protection while enabling the user to simply mount
the fixture with the through-hole taps that protrude on each side of the fixture. The mounting holes are 36 9/16 inches on
center apart along the top of this hazardous location light. The mounting holes are 7 inches on center across the top of the
light.
Suggested Applications: The HALP-EMG-48-2L is designed for marine wet and damp locations, where corrosion
resistant fluorescent lights are required. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters,
solvent/cleaning areas, water treatment areas, processing plants and marine loading docks.
Made in USA Quality
Lamp Options
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and
cost. Flange type stainless steel mounts attached at each end of the fixture
enables it to be simply secured to any surface.
3. Fixture housing constructed of glass fiber reinforced polyester.
4. Relamping done via 6 stainless steel snap locking latches, which enable
the operator to remove the door and access the lamps.
5. Lamp cover-diffuser constructed of high impact acrylic for corrosion
resistance and lamp protection.
6. 3/4 inch, threaded access hole for wiring conduit.
02/09/2015
F32-T8/841 – 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color
Page: 342
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-HALP-EMG-48-2L Hazardous Area
U.L. Ratings
UL Listing: United States - Canada
Class 1 Division 2, Groups A, B, C, D
Dimensions: W-8.25 " L-52 " H-7"
UL 844
Weight:8 Lbs
UL 1598A Marine Type (Salt water)
Total Watts: 108 watts*
Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz
Total Lumens: STD-T5-HO Bulbs 5900
Lamp Life Expectancy: STD-T5-HO Bulbs 24,000 Hours
Efficiency: STD-T5-HO Bulbs 92 Lumens per Watt
Operating Temp Range: T4C Rated -30 C to 70 C
Battery Backup: 90 minute runtime at 900 lumens.
Special Orders- Requirements
Color Temp: 4100K-
Contact us for special requirements
Mounting: Flange type stainless steel
Toll Free: 1-800-369-6671
Wiring Hub: 3/4 inch threaded
Fax: 1-903-498-3364
U.L Approval: U.S Certificate Canada Certificate
E-mail: [email protected]
Meets US Coast Guard specifications.
*Wattage totals are lamps only and may vary with different lamps.
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like
orders until the product is returned. This means, we will charge the customer for the product total and credit back the
difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from
the destination. Please contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-HALP-EMG-48-2L;
Monthly...$285.00 USD
Weekly...$190.00 USD
Scroll Down to Purchase- Please note: 2-3 day lead time on this light.
02/09/2015
Page: 343
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- Hi-Res Image 1 - Hi-Res Image 2 -
02/09/2015
Page: 344
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- Hi-Res Image 3 - Hi-Res Image 4 - Hi-Res Image 5 - Hi-Res Image 6 - Hi-Res Image 7 - Hi-Res Image 8 -
02/09/2015
Page: 345
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof LED Drop Light - 10 Watt LED - 50,000 Life Hours - 50' Cord - 120VAC - RENTAL
Part #: RNT-EHL-LED-7W-50
Price: $565.20
Made in the USA
The Larson Electronics RNT-EHL-LED-7W-50 Explosion Proof LED Drop Light / Trouble Light is U.L. approved
Class 1 Division 1 & 2 Groups C and D - and is ideal for general work activities in hazardous locations requiring
explosion proof protection.
This is a Rental Unit
This 10 watt explosion proof LED work light from Larson Electronics produces 1470 lumens of bright white light and comes
complete with 50 feet of explosion proof cord. The RNT-EHL-LED-7W-150 LED drop light has no ballast and the housing is
constructed of non sparking aluminum which results in a very lightweight unit. This hazardous location hand lamp is Class
1, Division 1 and 2 and Class 2 Division 1 and 2 hazardous location environment approved. This explosion proof LED drop
light is ideal for hazardous work areas where a ready source of easily managed lighting is desired.
100 Watt Incandescent Bulb
Click Photos to Enlarge
With the EHL-LED-7W-50
Click Photos to Enlarge
02/09/2015
Click Photos to Enlarge
Page: 346
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This 10 watt LED drop light is suitable for use in areas where petrochemical vapors and various dusts are present and
projects 1470 lumens of light, which is twice the lumens per watt output of a 100 watt incandescent bulb. This unit is rated
Class 1, Division 1 and comes complete with 50’ of SOOW 16/3 AWG cord ending in a 5-15 straight blade plug.
This hand lamp has a high efficiency LED bulb that requires no ballast, so the operator doesn't need to drag the ballast
housing around. This can be particularly annoying when the transformer becomes entangled in the cord. This explosion
proof LED hand light operates on standard 120-277 Volts AC Hz for US voltages. The light produced by this unit has a
6000k color temperature, which is much sharper and whiter than the light produced by incandescent lamps. The light
produced by this lamp is ideal for close work and inspection activities where good contrast and true color representation is
needed. The LED lamp in this unit runs much cooler than incandescent or flourescent lamps, resulting in a lamp housing
that remains cool to the touch and eliminates the accidental burns often encountered with incandescent drop lights.
Made in USA Quality
Lamp Features
1. Federal Spec Cord.
2. Explosion Proof.
3. 10 Watt 1470 Lumen LED Lamp.
4. Rugged fabricated steel and cast aluminum construction.
5. Blue and Gray paint finish.
6. UL Class1 Div1 Class 2 Div1
7. 120 Volt Operation
8. SOOW cable.
9. Aluminum Hook for Convenient Placement.
10 watt LED light produces 1470 lumens
Non-sparking aluminum housing
50,000 hour LED Lamp
Molded rubber bumper guard
Annealed glass tube shields prevent shattering
Integrated lamp shock absorbers prevent drop damage
Swivel hook for hanging and hands free operation
Explosion proof cord
02/09/2015
Page: 347
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
EHL-LED-7W-50
U.L. Ratings
UL Listing: United States
Class 1, Division 1 & 2 for Groups C, D
Dimensions:L-16.5 " Dia-5"
Class II, Division 1 and 2 for Groups F, G
Lumens: 760
Total Watts:10 watts
Voltage: 120-277VAC
Color Temp: 6000k
Mounting: Aluminum Hook
Wiring: 50' SOOW Cord
Lamp Type:: LED
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals
like purchases until the product is returned. (Rent to Own Rates) This means, we will charge the customer for the product
total and credit back the difference once the fixture is returned. Weekly and Monthly terms are available. Customer must
pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information if required.
Rental prices for the RNT-EHL-LED-7W-50;
Monthly...$109.00 USD
Weekly...$75.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer
can choose to convert their rental to a purchase at any time during the rental period. When returned, deductions will also be
made for shipping, repairs, and excessive cleaning, if needed.
3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their
expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson
Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.
Scroll Down to Purchase- Same Day Shipping on This Light!
02/09/2015
Page: 348
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- SpecSheet French
- SpecSheet Arabic
- Dimensional Drawing
02/09/2015
Page: 349
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
- STEP
- DXF
02/09/2015
Page: 350
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
*RENTAL* Explosion Proof Hand Lamp -100/60 Watt - 50 Foot SOOW Cord w/ Explosion Proof Plug *RENTAL*
Part #: RNT-EPL-120-50-1523
Price: $555.20
Made in the USA
*This unit is for rentals*
The Larson Electronics RNT-EPL-120-50-1523 Explosion Proof Hand Lamp is U.L. approved Class 1 Division 1 Groups C and D - and is
ideal for general work activities in hazardous locations requiring explosion proof protection.
This explosion proof work light from Larson Electronics comes complete with 50 feet of explosion proof cord. The RNT-EPL-120-50-1523 drop
light housing is constructed of aluminum with a rubber bumper guard designed to provide an effective lighting solution for operators requiring a
versatile source of illumination. This hazardous location hand lamp is Class 1, Division 1 approved when equipped with a 100 watt bulb and
Class 2 Division 1 approved when equipped with a 60 watt bulb. This explosion proof drop light is ideal for hazardous work areas where a ready
source of easily managed lighting is desired.
These particular units also come standard with an explosion proof twist-lock plug. The plug is Class I, Division I & II and Class II, Division I & II
rated. In order to complete the seal, operator must take twist-lock explosion proof plug and connect to an explosion proof outlet receptacle.
Connecting to a regular 120VAC outlet renders the plug useless and should only be done when connecting the light outside of the explosion
proof environment.
Dark 40' Container
Click Photos to Enlarge
Illuminated with EPL-120-50
Click Photos to Enlarge
02/09/2015
Click Photos to Enlarge
Page: 351
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
This 60 or 100 watt drop light is suitable for use in areas where petrochemical vapors (100 watt) and various dusts (60 watt) are present. This
unit is rated Class 1, Division 1, Class 2 Division 1 and comes complete with 50’ of SOOW 16/3 AWG cord ending in a straight blade plug.
This explosion proof hand light operates on standard 120 Volts. This unit is available with either a 100 watt bulb for Class 1 Division 1 operation
(Gases Vapors) or a 60 watt bulb for Class 2 division 1 operations (Dusts). Choose your bulb type below when ordering.
Made in USA Quality
Lamp Features
1. Federal Spec Cord.
2. Explosion Proof.
3. 60 or 100 Watt Lamp.
4. Rugged fabricated steel and cast aluminum construction.
5. Red and Gray paint finish.
6. UL Class1 Div1 Class 2 Div1
7. 120 Volt Operation
8. 50' SOOW cable.
9. Hook for Convenient Placement.
10. Explosion Proof Plug -Class I, Div. I & II
-Class II, Div. I & II
Rubber bumper Guard
Non-sparking aluminum housing
120 VAC operation
Aluminum lamp guard
Lamp shield prevent shattering
Plugs into standard outlets
Swivel hook for hanging and hands free operation
Explosion proof cord
Explosion Proof Twist-Lock Plug
Specifications / Additional Information
RNT-EPL-120-50-1523 Explosion Proof Handlamp
U.L. Approvals
UL Listing: United States
Class 1, Division 1 Groups C, D (100 watt)
Dimensions: L-16.5 " Dia-5"
Class 2, Division 1 Groups F, G (60 watt)
Total Watts: 100 or 60 watts
Conforms to UL standard 781
Voltage: Stnd-120VAC
CSA C22.2 No. 12 and CSAC22.2 No. 137
Mounting: Hook
Wiring: 50' SOOW Cord With 1523 Explosion Proof Plug
Lamp Type:: Incandescent
Special Orders- Requirements
Ambient Temp:: 40 degrees C maximum
Contact us for special requirements
Operating Temp:: 160 degrees C (T3C) Class 1 & 2
Toll Free: 1-800-369-6671
YOU CAN RENT THIS UNIT. CONTACT 1-800-369-6671.
Intl: 1-903-498-3363
Click here to view the Explosion Proof Light Design Description
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper
work, Larson Electronics processes rentals like orders until the product
is returned. This means, we will charge the customer for the product
total and credit back the difference once the fixture is returned. Weekly
and Monthly terms are available. Customer must pay shipping to and
from the destination. Please contact us Toll Free: at 1-800-369-6671
or (903) 498-3363 for further information if required.
Rental prices for the RNT-EPL-120-50-1523;
Monthly...130 USD
Weekly...75 USD
Scroll Down to Purchase- Same Day Shipping on This Light!
02/09/2015
Page: 352
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
02/09/2015
Page: 353
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Fluorescent Drop Light - 120V - 50' Cord - 26 Watts - Class I, Div. I - RENTAL
Part #: RNT-EPLFL-26W-P-120-50
Price: $495.00
Made in the USA
This unit is for rentals
The Larson Electronics RNT-EPLFL-26W-P-120-50 Hazardous Area Fluorescent Work light is U.L. approved Class
1 Division1 Groups C and D and is ideal for close quarter work and inspection activities in hazardous locations
requiring explosion proof protection.
This 26 watt explosion proof fluorescent work light from Larson Electronics produces 1800 lumens of fluorescent
illumination and comes complete with 50 feet of explosion proof cord. The RNT-EPLFL-26W-P-120-50 fluorescent drop
light uses a compact fluorescent bulb to produce light which removes the need for an inline ballast assembly. The lamp
body is constructed of high strength plastic and aluminum which helps to reduce weight and improve durability.This
hazardous location hand lamp is Class 1, Division 1 and Class 2 Division 1 hazardous location environment approved.
50' of explosion proof SOOW cord ending in a straight blade plug is included with this lamp as well as an integral mounting
hook for easy light placement.
02/09/2015
Page: 354
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
This 26 watt fluorescent light operates on 120 Volt current and is suitable for use in areas where petrochemical vapors and
various dusts are present. The lamp creates 1,800 lumens of light, roughly equivalent to a 100 watt incandescent bulb as
estimated by Sylvania. The bulb is backed with a white reflector which is designed to keep the light out of the operator's
eyes and focus more of the light on the subject area. Fluorescent lights are popular in paint prep, painting and post-paint
inspection operations due to the even white color light produced. Incandescent lights tend to create yellowish, shadowy
light that confuses the eye and makes it difficult to examine a work area with consistency. The light output, color and
evenness of coverage make fluorescent lights popular for a wide variety of close quarter work and inspection activities.
This explosion proof hand lamp is relatively easy to relamp. Set screws hold the 2 piece plastic cover in place over the
aluminum core. Once the plastic covers are unscrewed, the bulb is revealed. The bulb is encapsulated within a glass
dome, which is enveloped by the plastic outer housing. An aluminum ring is screwed into place over the lip of the dome
and a o-ring style gasket ensures the seal. Once the glass dome and seal are removed, the operator can replace the 4pin compact fluorescent bulb.
Made in USA Quality
Lamp Features
1. Federal Spec JC-580A Cord.
2. Indoor or outdoor use.
3. Standard 120 Volt operation.
4. Rugged plastic and aluminum construction.
5. Sealed Lamp Cover.
6. UL Listed Class1 Dv 1, Class 2 Div 1
7. Lightweight.
8. 50' SOOW cable- 515 straight blade plug.
9. UL and CUL Listed.
26 watt fluorescent produces 1800 lumens.
Plastic and aluminum housing.
Compact fluorescent lamp.
No inline ballast to tangle or damage.
Glass lamp shield prevents shattering
Lamp and glass cover protected by plastic cage.
Swivel hook for hanging and hands free operation.
Explosion proof cord.
02/09/2015
Page: 355
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPLFL-26W-P-120-50 Hand Lamp
U.L. Ratings
UL Listing: United States - Canada
Class 1, Division 1 for Groups C, D
Dimensions:L-23 " Dia-4"
Class II, Division 1 Groups F, G
Lamp Type: Compact Fluorescent
UL listed U.S. and Canada
Total Watts: 26 watts
UL Listed Explosion Proof Cord
Voltage: Stnd-120V-60hz
Total Lumens: 1800
Mounting: Swivel Hook
Wiring: 50' SOOW Cord
U.L Approval: U.S Certificate Canada Certificate
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Intl: 1-903-498-3363
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like
orders until the product is returned. This means, we will charge the customer for the product total and credit back the
difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from
the destination. Please contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EPLFL-26W-P-120-50;
Monthly...$172.00 USD
Weekly...$115.00 USD
Scroll Down to Purchase- Same Day Shipping Available!
Links (Click on the below items to view):
- Dimensional Drawing
- STEP
- DXF
02/09/2015
Page: 356
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Class 1 Division 1 300 Watt Incandescent Light - Explosion Proof - Wall Mount - 120 Volts - RENTAL
Part #: RNT-EPL-WM-300W-120V
Price: $374.00
Made in the USA
This unit is for rentals
The RNT-EPL-WM-300W-120V incandescent Explosion Proof Light from Larson Electronics is UL rated Class 1 Division 1, Groups C, D,
paint spray both approved, and produces approximately 4,000 lumens. Water proof and IP67 rated , this 300 watt incandescent
equipped light is available in wall, ceiling, and pendant mount options.
The powerful and durable RNT-EPL-WM-300W-120V explosion proof light from Larson Electronics is approved for use in paint spray booths and
is ideal for industrial applications, hazardous work spaces, and areas where gases, vapors and dusts may be present and a powerful and durable
light solution is needed. The lamp housing is waterproof, constructed of heavy cast aluminum, and UL tested to withstand 1490 lbs. per square
inch of hydrostatic pressure. Factory sealed and finished in a durable polyester powder coating, this lamp can be ordered in configurations for
wall, ceiling and pendant mounting.
02/09/2015
Page: 357
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Click Photo to Enlarge
This hazardous area light carries a T3C temperature rating and is U.L. approved Class 1, Groups C and D, Class 2, Groups E and F, and Class
III, Groups E, F and G. This light is IP67 rated waterproof and suitable for use in paint spray booths and areas where flammable gases, vapors
and chemicals may be encountered as well as approved for exposure to combustible dusts. The cast aluminum housing is fully factory sealed
and includes an integrated inspection hole for easy access to the splice compartment. Wiring is through a 3/4" hub.
Click here to see the Photometric report of the Larson Electronics EPL-WM-300W-120V light fixture.
The spring loaded lamp socket is a medium base glazed porcelain design with heavy gauge nickel plated copper components and the socket
leads pass through sealing compound that separates the lamp chamber from the wiring compartment. The bulb and socket assembly is protected
by an impact and heat resistant clear prismatic globe with heavy gauge aluminum reflector that affords excellent light control.
Voltages: 120VAC draws 0.04A average.
Temp Code: Class 1 T3 (Do not install where the operating temperature exceeds the ignition temperature of the hazardous atmosphere.)
02/09/2015
Page: 358
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EPL-WM-300W-120V
U.L Ratings
Lamp Type: incandescent
Class 1, Groups C and D
Lamp Dimensions: 7.25"-Wide, 15" Height
Class II, Groups E and F
Lamp Weight: 12 lbs
Class III, Groups E, F and G
Hub: 3/4" Threaded
IP67 (water proof)
Lumens: Approximately 4,000
Suitable for Paint Spray Booths
Voltage: 120 Volts 60hz AC,
T3C Temperature Rating
Lighting Configuration: Steady On
Mounting: Wall Mount, Ceiling-Pendant Mount optional
Temp Rating: T3C
Wiring: 3/4 inch Hub
Special Orders- Requirements
Contact us for special requirements
Toll Free: 1-800-369-6671
Fax: 1-903-498-3364
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the product is
returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is returned. Weekly and
Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903) 498-3363 for further information
if required.
Rental Prices for the RNT-EPL-WM-300W-120V;
Monthly...$182.00 USD
Weekly...$124.67 USD
Scroll Down to Purchase
Links (Click on the below items to view):
- Dimensional Drawing
02/09/2015
Page: 359
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Rechargeable LED Flashlight - Spot & Flood Combo - Class 1 Div. 1&2 - 18 Hour Runtime - RENTAL
Part #: RNT-EXPRL-96
Price: $355.00
Made in The USA
This unit is for rentals
The RNT-EXPRL-96 Explosion Proof-Intrinsically Safe LED Trouble Light is designed to handle the demands of working within
hazardous locations and environments where potentially explosive vapors, gases and other volatile compounds may be encountered.
This intrinsically safe LED trouble light comes a with a lifetime warranty and produces a powerful 240 lumen spotlight light beam and 320
lumens in floodlight mode. This LED trouble light adds extra functionality and utility through the inclusion of an independently operable
secondary flood type beam. The main beam from this compact and lightweight LED trouble light is tightly focused to produce a beam of bright
white light capable of reaching up to 110 feet in length. A secondary flood beam can be operated independently of the main light to produce a
320 lumen flood pattern of light covering approximately 90 square feet useful for close work and general illumination.
Either beam can be operated alone to produce a 240 lumen spotlight or floodlight beam, or in combination to produce a total of 560 lumens of
light. This light can also be switched between half power mode for maximum runtime and full power mode for maximum light output when in
floodlight mode. Made in the USA, this explosion proof LED trouble light offers up to 18 hours battery run time on a 3 hour charge from 12 volt
vehicle source and US/International wall outlets. The EXPRL-96 comes with a quick release charging cradle, ceiling hook and belt ring. This
LED trouble light is versatile, rugged and can serve in industrial, public and commercial applications with ease.
02/09/2015
Page: 360
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Spot beam at 50 feet
Flood beam at 50 feet
Combination Flood/Spot
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
Click Photo to Enlarge
02/09/2015
Page: 361
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Both the flood and spot beams of this trouble light are actuated via their own momentary or constant on switches. The high intensity LEDs used
in this trouble light can produce a 240 lumen spot beam or a 320 lumen flood beam of light or a 560 lumen combination of each and offer
50,000 hour lifespans. These high efficiency LEDs produce a 18 hour runtime when operating in low mode and a 9 hour runtime when operating
in full power mode.
The housing is constructed of lightweight and chemical resistant polymer that offers non slip grip and high durability. This LED trouble light is
impact and vibration resistant, waterproof to one meter, and comes with an included ceiling hook and belt ring for easy positioning and carrying
convenience. This intrinsically safe trouble light is approved Class 1, 2, 3 Div 1, Class 1, 2, 3, Div 2 and offers users the highest level of
hazardous location protection available while providing the safety and efficiency of brilliant LED illumination.
Charging System:
Versatile configuration works 12 VDC and 100 VAC to 240 VAC at 50/60 HZ - wall outlet plug and vehicle cigarette plug included.
Single quick release cradle can be desk or wall mounted and vehicle mounted with DC connection provided.
Fast charge rate - full charge in 3 hours from fully depleted state - overcharge protection and LED indicators to show battery status.
Energy and function management system assures maximum energy capacity with no risk of over-charge and lower operating cost.
Battery Pack:
Medical grade, rechargeable NiMH.
Full charge every charge with no capacity degradation due to recharge memory.
1000+ recharge cycles.
Earth Friendly NiMH battery does not pollute the environment.
High Quality Construction
Superior LED Benefits
1. High Intensity LEDs- 560 Total Lumens
1. Extreme long life.
2. Momentary/Constant On Switches
3. Single or Tandem Light Beam Operation
2. High efficiency and low amp draw.
3. High durability and reliability.
4. Waterproof
5. Chemical/Impact Resistant
4. Small size and light weight.
5. 100% recyclable.
6. 18 hour Runtime
7. Intrinsicallyy Safe Approval
6. No toxins-lead, mercury.
7. High light output..
8. Ceiling Hook/Belt RingCarry
9. Wall outlet plug/vehicle cigarette plug included
8. Consistent color over time.
9. High Versatility.
10. No fragile glass used in construction.
12. Vibration/impact resistant.
02/09/2015
Page: 362
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Specifications / Additional Information
RNT-EXPRL-96 Intrinsically Safe
UL Approval
Lamp Type: LED Light Emitting Diode
Class 1, 2, 3 Div 1, 2
Dimensions: Dia-1.75" Length-13.6 "
Groups C,D
Weight: 28 Oz
Explosion Proof/Intrinsically Safe
Power: Rechargeable NiMH Batteries
Waterproof to 1 Meter
Runtime: 18 hrs High Mode, 9 Hours Low Mode
FCC approved Part 15 and 18
Lumens: 240 Spot Beam- 320 Flood Beam 560 Total Dual Mode
No EM interference with communication or acute care medical
electronics
Lamp Life: 50,000 hrs
Operating Temp Range: 30°C to +60°C
Waterproof: Yes- Rated to 1 Meter
Special Orders- Requirements
Contact us for special requirements
Spanish Spec Sheets for Two Way LED Explosion Proof Light
Toll Free: 1-800-369-6671
Explosion Proof Light Design Description
Fax: 1-903-498-3364
E-mail: [email protected]
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like
orders until the product is returned. This means, we will charge the customer for the product total and credit back the
difference once the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from
the destination. Please contact us at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EXPRL-96;
Monthly...$152.00 USD
Weekly...$106.00 USD
Same Day Shipping Available! Scroll Down to Purchase- Need a more powerful beam? Click here to see our Explosion
Proof HID Flashlights!
Links (Click on the below items to view):
- Dimensional Drawing
02/09/2015
Page: 363
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Static Conductive Duct for EPF-8P-E Electric Explosion Proof Fan - 8 inch OD - 25' Long -RENTAL
Part #: RNT-EPF-8-D25
Price: $290.00
Explosion Proof Fan Duct - 25 foot Static Conductive Duct . This particular unit is a rental. The EPF-8PE and EPF-10P.3 explosion
proof fans are readily available for rental as well.
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like orders until the
product is returned. This means, we will charge the customer for the product total and credit back the difference once the fixture is
returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us at (903)
498-3363 for further information if required.
Rental Prices for the RNT-EPF-30P;
Monthly...60.00 USD
Weekly...37.00 USD
Hazardous location areas require a static conductive duct (8 inches outside diameter X 25 feet). Static conductive duct lengths are
connected via aluminum couplers. You will need an aluminum coupler to connect 2 pieces of duct.
Click here to learn more about National Electrical Code Hazardous Location Classifications
02/09/2015
Page: 364
Larson Electronics LLC
WWW.LARSONELECTRONICS.COM
9419 E US HWY 175, Kemp, TX 75143 Phone: 903.498.3363 Fax: 903.498.3364 Email: [email protected]
Explosion Proof Fan Ventilation Duct Coupling - RENTAL
Part #: RNT-EPF-8P-ADC
Price: $60.00
Air duct coupling for Explosion proof ventilation ducts. Connects two ducts for additional length.
Rentals: In an effort to cut back on contracts and various other paper work, Larson Electronics processes rentals like purchases until the
product is returned. (Rent to Own Rates) This means, we will charge the customer for the product total and credit back the difference once
the fixture is returned. Weekly and Monthly terms are available. Customer must pay shipping to and from the destination. Please contact us
at (903) 498-3363 for further information if required.
Rental Prices for the RNT-EPF-8P-ADC;
Monthly... $20.31.00 USD
Weekly... $10.00 USD
Subtract rental cost from total cost for the amount that will be credited back to customer upon return of product. Customer can choose to
convert their rental to a purchase at any time during the rental period. When returned, deductions will also be made for shipping, repairs,
and excessive cleaning, if needed.
02/09/2015
Page: 365