CD 25 CD 25 Cord Drive or Chain Drive. Easy manual operation by geared drive. Ø 24 mm. Adaptable to headrails by clips. Venetian Blinds With CTS25 CD 25 Product Single output shaft drive with integrated brake and gearbox for light manual operation by cord or chain. Application Venetian, Roman, horizontal pleated or cellular blinds. Maximum revolutions No limit (limits are given by AMS 25 or CTS 25). Adaptation to headrail By specifically for different types and sizes of headrails designed clip-on adapters. Pleated Blinds With CTS25 Adaptation to shaft By specifically to shaft designed adapter recessed in actuator. ! Caution see Assembly Instructions. MANUAL BLIND Mounting Side or lateral mounting on single shaft with cord lock slot output. Cellular Blinds With CTS25 Control By chain or cord loop Roman Blinds With CTS25 All information subject to change ©SOMFY.COM980400. All rights reserved.04/2003 12 CD 25 TECHNICAL DATA Maximum output torque (Nm) Reduction ratio Maximum off. centre possibility of out-put shaft (mm) Working temperature (C°) Internal used only Polyester End less cord diameter (mm) Endless beaded chain diameter/step (mm) Net Weight (g) PATENTS PENDING US PATENTS PENDING FR CD 25 1/4.8 1 1/4.8 0.7 -10 to +60° CD 25 1/2.6 0.6 1/2.6 0.7 -10 to +60° CD 25 1/1 0.3 1/1 0.7 -10 to +60° 3.1 3.2/4 or 4.5/12 31 5.857.553 2749361 3.1 3.2/4 or 4.5/12 30 5.857.553 2749361 3.1 3.2/4 or 4.5/12 25 5.857.553 2749361 ! Please contact us to know Ø 3 mm specified cords. CD 25 1/4.8 & 1/1 45 maxi Ø24 15.5 39 CD 25 1/2.6 48.5 maxi Ø24 15.5 42.5 All information subject to change ©SOMFY.COM980400. All rights reserved.04/2003 13