1. No category

Yaesu FT-857D Quick Reference
No Menu Item
001 EXT MENU
002 144MHz ARS
003 430MHz ARS
004 AM&FM DIAL
Function
Available Values
Enables/Dis ables the extended Menu
ON/OFF
Mode.
Activates/deactivates the Automatic
ON/OFF
Repeater Shift feature when operating
on the 144 MHz band.
Activates/deactivates the Automatic
ON/OFF
Repeater Shift feature when operating
on the 430 MHz band.
Enabling/disabling t he DIAL knob on t he AM ENABLE/DISABLE
Default
OFF
No Menu Item
046 DSP HPF CUTOFF
1
047 DSP LPF CUTOFF
1
048 DSP MIC EQ
DISABLE
and FM m odes.
005 AM MIC GAIN
Adjusts the microphone gain level for
the AM m ode.
006 AM STEP
Selects the t uning st eps for t he SELECT knob
on the AM m ode.
007 APO TIME
008 ARTS BEEP
Selects the Auto Power Off tim e (tim e
before power goes off).
Selects the ARTS beep mode.
009 ARTS ID
Enables/dis ables the CW identifier
during ARTS operation.
Stores your calls ign into the CW
identifier.
011 BEACON TEXT 1 Stores the message for the Beacon.
010 ARTS IDW
1 Volume
2 RF Gain
3 Select Knob (Push to
tune Mhz)
4 Home
5 Clar / IF Shift
6 FunctionMenu / Hold for
Menu
7 Menu Keys
8 Mode (LSB <> USB <>
CW <> CWR <> AM <>
FM <> DIG <> PKT <>
LSB)
9 DSP Menu
10 Fast / Hold for Power
11 TX / Busy
12 Change Band
13 VFO / Memory
14 LOCK
15 Main Dial (select
frequency or menu option)
16 Main Display
Front Panel Menus
MFa
MFb
MFc
MFd
MFe
MFf
MFg
MFh
MFi
A/B
MW
STO
RPT
TON/ENC
ARTS
SCN
SCOP
MTR
A=B
SKIP
RCL
REV
----/DEC
SRCH
PRI
WID
SPL
TAG
PROC
VOX
TDCH
PMS
DW
STEP
DISP
MFj
MFk
MFl
MFm
MFn
MFo
MFp
MFq
SPOT
TUNE
NB
IPO
CFIL
PLY1
DNR
UPRG1
BK
DWN
AGC
ATT
FIL-1
PLY2
DNF
UPRG2
KEY
UP
AGC SPD
NAR
FIL-2
PLY3
DBF
UPRG3
0 ~ 100
50
2.5/5/9/10/12.5/25
kHz
OFF/1h ~ 6h
OFF
OFF/RANGE/ALL
RANGE
1
ON/OFF
OFF
–
YAESU
–
–
OFF/1 sec ~
255sec
OFF
440/880/1760 Hz
880Hz
0 ~ 100
50
Setting of the degree of DSP Noise
Reduction.
050 EMERGENCY
Enables Tx/Rx operation on the Alaska
Em ergency Channel, 5167.5 kHz.
051 FM MIC GAIN
Adjusts the microphone gain level for the
FM mode.
052 FM STEP
Selects the tuning steps for the SELECT
knob in the FM mode.
053 HOME-->VFO
Enables/dis ables the moving of HOME
channel data to the VFO.
054 LOCK MODE
Selects the operation of the front panel’s
LOCK key.
055 MEM GROUP
Enables/dis ables the mem ory grouping
feature.
056 MEM TAG
Stores Alpha-Numeric “Tags” for the
m emory channels.
057 MEM/VFO DIAL MODE
Selects the function which is engaged
when you press the SELECT knob.
Selects the interval tim e (between
message and message).
013 BEEP TONE
Selects the beep frequency.
014 BEEP VOL
Selects the beep volum e level.
015 CAR LSB R
Sets the Rx Carrier Point for LSB.
–300 ~ +300 Hz
0 Hz
060 MTR ARX SEL
016 CAR LSB T
Sets the Tx Carrier Point for LSB
–300 ~ +300 Hz
0 Hz
061 MTR ATX SEL
017 CAR USB R
Sets the Rx Carrier Point for USB
–300 ~ +300 Hz
0 Hz
062 MTR PEAK HOLD
018 CAR USB T
Sets the Tx Carrier Point for USB
–300 ~ +300 Hz
0 Hz
063 NB LEVEL
058 MIC SCAN
059 MIC SEL
Sets the transceiver’s circuitry for the
4800 bps/9600
4800bps
CAT baud rate to be used.
bps/38400 bps
020 CAT/LIN/TUN
Selects the device which is connected CAT/LINEAR/TUN
CAT
to the CAT/LINEAR jack on the rear
ER
panel.
021 CLAR DIAL SEL Defines the “control” knob to be used
SEL, MAIN
SEL
for setting of the clarifier offset
frequency.
022 CW AUTO MODE Selects whether the KEY jack shall be
ON/OFF
OFF
“Enabled” or “Disabled” while us ing
the SSB/FM modes.
023 CW BFO
Sets the CW carrier oscillator injection USB/LSB/AUTO
USB
side on the CW mode.
024 CW DELAY
Sets the receiver recovery tim e during FULL/30 ~ 3000
250 m sec
pseudo0VOX CW sem i-break-in
m sec
operation.
025 CW KEY REV
Sets the keyer paddle’s wiring
NORMAL/REVERS
NORMAL
configuration.
E
026 CW PADDLE
Enables/dis ables CW keying by the
ELEKEY/MICKEY
ELEKEY
microphone’s [UP]/[DWN] keys.
027 CW PITCH
Setting of the pitch of the CW
400 ~ 800 Hz
700 Hz
sidetone, BFO offset, and CW filter
center frequencies.
028 CW QSK
Selects the tim e delay between when
10/15/20/25/30
10 ms
the PTT is keyed and the carrier is
ms
transmitted during QSK operation
when using the internal keyer.
029 CW SIDE TONE Setting of the CW sidetone volum e
0 ~ 100
50
level.
030 CW SPEED
Sets the sending speed for the built-in
4 ~ 60 wpm
12 wpm (60 cpm )
Electronic keyer.
(1wpm /step)/20 ~
300 cpm
(5cpm/step)
031 CW TRAINING
Sends random Morse Code fiveN, A, AN
N
character groups via the sidetone.
032 CW WEIGHT
Sets the Dot:Dash ratio for the built-in
1:2.5 ~ 1:4.5
01:03.00
electronic keyer.
033 DCS CODE
Setting of the DCS code.
104 Standard
23
DCS codes
034 DCS INV
Selects “Norm al” or “Inverted” DCS
Tn-Rn/Tn-Riv/TivTn-Rn
coding.
Rn/Tiv-Riv
035 DIAL STEP
Setting of the DIAL knob’s tuning
FINE/COARSE
FINE
speed.
036 DIG DISP
Defines the dis played frequency offset –3000 ~ +3000 Hz
0 Hz
during DIG (USER-L or USER-U)
mode operation.
037 DIG GAIN
Adjusts the audio input level from
0 ~ 100
50
terminal equipment during DIG
(Digital) m ode operation.
038 DIG MODE
Selects the mode and sideband in the RTTY-L/RTTYRTTY-L
U/PSK31-L/RTTYDIG (Dig ital) m ode.
L/PSK31-U/USERL/USER-U
039 DIG SHIFT
Defines the carrier frequency offset
–3000 ~ +3000 Hz
0 Hz
during DIG (USER-L or USER-U)
mode operation.
040 DIG VOX
Sets the gain of the VOX circuitry’s
0 ~ 100
0
input level for the DIG m ode.
064 OP FILTER 1
041 DISP COLOR
Selects the illumination color for each
operating status.
042 DISP CONTRAST Setting of the dis play contrast level.
043 DISP INTENSITY Setting of the dis play brightness level.
044 DISP MODE
Sets up the LCD Lamp mode.
045 DSP BPF WIDTH Setting of the bandwidth for the DSP
CW audio filter.
Sets the DSP microphone equalization
pattern.
049 DSP NR LEVEL
012 BEACON TIME
019 CAT RATE
Function
Adjusts the low-cut characteris tics of the
DSP HPF filter.
Adjusts the high-cut characteris tics of the
DSP LPF filter.
Enables/dis ables scanning access via the
m icrophone’s [UP]/[DWN] keys.
The choice of the equipment which
connects to the MIC jack.
Select the analog meter dis play
configuration while the trans ceiver is
receiving.
Selects the analog meter display
configuration while the trans ceiver is
transm itting.
Enabling/disabling of the “peak hold”
function of the m eter.
Setting of the blanking level for the IF Noise
Blanker.
Not available at this tim e.
065 PG A
Program ming the [A] key (in the Operating
Function Row “q” (MFq)) function.
066 PG B
Program ming the [B] key (in the Operating
Function Row “q” (MFq)) function.
067 PG C
Program ming the [C] key (in the Operating
Function Row “q” (MFq)) function.
068 PG ACC
Program ming the optional MH-59A8J
m icrophone’s [ACC] button assignm ent.
Program ming the optional MH-59A8J
m icrophone’s [P1] button as signment.
069 PG P1
070 PG P2
071 PKT 1200
072 PKT 9600
Program ming the optional MH-59A8J
m icrophone’s [P2] button as signment.
Adjusts the audio input level from the TNC
during 1200 bps Packet operation.
Adjusts the audio input level from the TNC
during 9600 bps Packet operation.
073 PKT RATE
Sets the transceiver’s circui try for the
Packet baud rate to be used.
074 PROC LEVEL
Sets the compression level for the AF
speech proces sor in the SSB/AM m odes.
Setting of the m axim um power level for the
current band.
075 RF POWER SET
Available Values
100 ~ 1000 Hz
Default
100 Hz
1000 ~ 6000 Hz
6000 Hz
OFF/LPF/HPF/BOT
H
OFF
1 ~ 16
8
ON/OFF
OFF
0 ~ 100
50
5/6.25/10/12.5/15/
20/25/50 kHz
ON/OFF
ON
DIAL/FREQ/PANE
L/ALL
ON/OFF
2
DIAL
OFF
–
–
CW
SIDETONE,CW
SPEED,MHz/MEM
GRP,MIC GAIN,
NB LEVEL,RF
POWER, STEP
ON/OFF
MHz/MEM GRP
NOR/RMT/CAT
NOR
ON
SIG, CTR, VLT,
N/A, FS,OFF
SIG
PWR, ALC, MOD,
SWR,VLT, N/A,
OFF
ON/OFF
PWR
0 ~ 100
50
ON
–
–
All Multi Function,
All Menu Item ,
MONI, Q.SPL,
TCALL, ATC and
USER.
MONI
Q. SPL
ATC
MONI
Q. SPL
TCALL
0 ~ 100
50
0 ~ 100
50
1200/9600 (bps)
1200 bps
0 ~ 100
50
5 ~ 100 2 ~ 100
(UHF)
2
076 RPT SHIFT
Sets the magnitude of the repeater shift.
0.00 ~ 99.99 (MHz)
2
077 SCAN MODE
Selects the desired Scan-Resume mode.
TIME/BUSY/STOP
TIME
078 SCAN RESUME
Sets the delay tim e for scanning
resumption.
Enables/dis ables split CTCSS/DCS
cording.
Selects the configuration of the front
panel’s SQL/RF knob.
Adjusts the microphone gain level for the
SSB mode.
1 ~ 10 (s ec)
5 sec
ON/OFF
OFF
079 SPLIT TONE
080 SQL/RF GAIN
081 SSB MIC GAIN
082 SSB STEP
Selects the tuning steps for the SELECT
knob on the SSB m ode.
083 TONE FREQ
Setting of the CTCSS Tone Frequency.
084 TOT TIME
085 TUNER/ATAS
–
FIX: 26
086 TX IF FILTER
1 ~ 13
1 (Dim) ~ 3
(Bright)
OFF/AUTO1/AUTO
2/ON
60/120/240 Hz
5
3
087 VOX DELAY
088 VOX GAIN
AUTO2
089 XVTR A FREQ
240 Hz
090 XVTR B FREQ
091 XVTR SEL
RF-GAIN/SQL
1
0 ~ 100
50
1kHz/2.5kHz/5kHz
2.5kHz
50 Standard
CTCSS tones
88.5 Hz
Select the Tim e-Out Tim er tim e.
OFF/1 ~ 20 (min)
OFF
Selects the device (FC-30 or ATAS-100/120) to be controlled via the front panel’s
[A](TUNE) key.
Selects the Trans m it IF filter.
OFF/ATAS(HF)/AT
AS(HF&50)/ATAS(
ALL)/TUNER
CFIL/FIL1/FIL2
OFF
CFIL
Sets the “hang tim e” for the VOX circuitry.
Sets the gain of the VOX circuitry’s input
audio detector.
Allows an arbitrary frequency to be set on
the dis play, to allow direct frequency
readout during transverter operation.
100 ~ 3000 (ms)
1 ~ 100
500 m s
50
0,000,00 ~
9999,999,00 (kHz)
–
OFF/X VTR A/X
VTR B
OFF
Enables/dis ables/selects the antenna port
to be used for Transverter operation.
–
Yaesu FT-857D Quick Reference
No Menu Item
001 EXT MENU
002 144MHz ARS
003 430MHz ARS
004 AM&FM DIAL
Function
Available Values
Enables/Dis ables the extended Menu
ON/OFF
Mode.
ON/OFF
Activates/deactivates the Automatic
Repeater Shift feature when operating
on the 144 MHz band.
Activates/deactivates the Automatic
ON/OFF
Repeater Shift feature when operating
on the 430 MHz band.
Enab ling /disabl ing t he DIAL knob on t he A M ENABLE/DISABLE
Default
OFF
No Menu Item
046 DSP HPF CUTOFF
1
047 DSP LPF CUTOFF
1
048 DSP MIC EQ
DISABLE
and FM m odes.
005 AM MIC GAIN
Adjusts the microphone gain level for
the AM m ode.
006 AM STEP
Sel ects the t un ing st ep s for t he SELECT knob
on the AM m ode.
007 APO TIME
008 ARTS BEEP
Selects the Auto Power Off time (tim e
before power goes off).
Selects the ARTS beep mode.
009 ARTS ID
Enables/dis ables the CW identifier
during ARTS operation.
Stores your calls ign into the CW
identifier.
011 BEACON TEXT 1 Stores the message for the Beacon.
010 ARTS IDW
0 ~ 100
50
2.5/5/9/10/12.5/25
kHz
OFF/1h ~ 6h
OFF
OFF/RANGE/ALL
RANGE
1
ON/OFF
OFF
–
YAESU
–
–
OFF/1 sec ~
255sec
OFF
440/880/1760 Hz
880Hz
0 ~ 100
50
1 Volume
2 RF Gain
3 Select Knob (Push to
tune Mhz)
4 Home
5 Clar / IF Shift
6 FunctionMenu / Hold for
Menu
7 Menu Keys
8 Mode (LSB <> USB <>
CW <> CWR <> AM <>
FM <> DIG <> PKT <>
LSB)
9 DSP Menu
10 Fast / Hold for Power
11 TX / Busy
12 Change Band
13 VFO / Memory
14 LOCK
15 Main Dial (select
frequency or menu option)
16 Main Display
Front Panel Menus
MFa
MFb
MFc
MFd
MFe
MFf
MFg
MFh
MFi
A/B
MW
STO
RPT
TON/ENC
ARTS
SCN
SCOP
MTR
A=B
SKIP
RCL
REV
----/DEC
SRCH
PRI
WID
SPL
TAG
PROC
VOX
TDCH
PMS
DW
STEP
DISP
MFj
MFk
MFl
MFm
MFn
MFo
MFp
MFq
SPOT
TUNE
NB
IPO
CFIL
PLY1
DNR
UPRG1
BK
DWN
AGC
ATT
FIL-1
PLY2
DNF
UPRG2
KEY
UP
AGC SPD
NAR
FIL-2
PLY3
DBF
UPRG3
Setting of the degree of DSP Noise
Reduction.
Enables Tx/Rx operation on the Alaska
050 EMERGENCY
Em ergency Channel, 5167.5 kHz.
051 FM MIC GAIN
Adjusts the m icrophone gain level for the
FM mode.
052 FM STEP
Selects the tuning steps for the SELECT
knob in the FM mode.
Enables/dis ables the moving of HOME
053 HOME-->VFO
channel data to the VFO.
054 LOCK MODE
Selects the operation of the front panel’s
LOCK key.
Enables/dis ables the mem ory grouping
055 MEM GROUP
feature.
056 MEM TAG
Stores Alpha-Numeric “Tags” for the
m emory channels .
057 MEM/VFO DIAL MODE
Selects the function which is engaged
when you press the SELECT knob.
Selects the interval tim e (between
message and message).
013 BEEP TONE
Selects the beep frequency.
014 BEEP VOL
Selects the beep volum e level.
015 CAR LSB R
Sets the Rx Carrier Point for LSB.
–300 ~ +300 Hz
0 Hz
060 MTR ARX SEL
016 CAR LSB T
Sets the Tx Carrier Point for LSB
–300 ~ +300 Hz
0 Hz
061 MTR ATX SEL
017 CAR USB R
Sets the Rx Carrier Point for USB
–300 ~ +300 Hz
0 Hz
062 MTR PEAK HOLD
018 CAR USB T
Sets the Tx Carrier Point for USB
–300 ~ +300 Hz
0 Hz
063 NB LEVEL
058 MIC SCAN
059 MIC SEL
Sets the transceiver’s circuitry for the
4800 bps/9600
4800bps
CAT baud rate to be used.
bps/38400 bps
020 CAT/LIN/TUN
CAT
Selects the device which is connected CAT/LINEAR/TUN
to the CAT/LINEAR jack on the rear
ER
panel.
021 CLAR DIAL SEL Defines the “control” knob to be used
SEL, MAIN
SEL
for setting of the clarifier offset
frequency.
022 CW AUTO MODE Selects whether the KEY jack shall be
ON/OFF
OFF
“Enabled” or “Disabled” while us ing
the SSB/FM modes.
Sets the CW carrier oscillator injection USB/LSB/AUTO
023 CW BFO
USB
side on the CW mode.
024 CW DELAY
Sets the receiver recovery tim e during FULL/30 ~ 3000
250 m sec
pseudo0VOX CW sem i-break-in
m sec
operation.
025 CW KEY REV
NORMAL
Sets the keyer paddle’s wiring
NORMAL/REVERS
configuration.
E
Enables/dis ables CW keying by the
026 CW PADDLE
ELEKEY/MICKEY
ELEKEY
microphone’s [UP]/[DWN] keys.
027 CW PITCH
400 ~ 800 Hz
700 Hz
Setting of the pitch of the CW
sidetone, BFO offset, and CW filter
center frequencies.
Selects the tim e delay between when
028 CW QSK
10/15/20/25/30
10 ms
the PTT is keyed and the carrier is
ms
transmitted during QSK operation
when using the internal keyer.
029 CW SIDE TONE Setting of the CW sidetone volum e
0 ~ 100
50
level.
4 ~ 60 wpm
030 CW SPEED
Sets the sending speed for the built-in
12 wpm (60 cpm )
(1wpm /step)/20 ~
Electronic keyer.
300 cpm
(5cpm/step)
031 CW TRAINING
N, A, AN
N
Sends random Morse Code fivecharacter groups via the sidetone.
032 CW WEIGHT
Sets the Dot:Dash ratio for the built-in
1:2.5 ~ 1:4.5
01:03.00
electronic keyer.
033 DCS CODE
Setting of the DCS code.
104 Standard
23
DCS codes
034 DCS INV
Tn-Rn
Selects “Norm al” or “Inverted” DCS
Tn-Rn/Tn-Riv/Tivcoding.
Rn/Tiv-Riv
Setting of the DIAL knob’s tuning
035 DIAL STEP
FINE/COARSE
FINE
speed.
036 DIG DISP
0 Hz
Defines the dis played frequency offset –3000 ~ +3000 Hz
during DIG (USER-L or USER-U)
mode operation.
Adjusts the audio input level from
037 DIG GAIN
0 ~ 100
50
terminal equipment during DIG
(Digital) m ode operation.
038 DIG MODE
Selects the mode and sideband in the RTTY-L/RTTYRTTY-L
DIG (Digital) m ode.
U/PSK31-L/RTTYL/PSK31-U/USERL/USER-U
064 OP FILTER 1
039 DIG SHIFT
040 DIG VOX
Defines the carrier frequency offset
during DIG (USER-L or USER-U)
mode operation.
Sets the gain of the VOX circuitry’s
input level for the DIG m ode.
041 DISP COLOR
Selects the illumination color for each
operating status.
042 DISP CONTRAST Setting of the dis play contrast level.
043 DISP INTENSITY Setting of the dis play brightness level.
044 DISP MODE
Sets up the LCD Lamp mode.
045 DSP BPF WIDTH Setting of the bandwidth for the DSP
CW audio filter.
–3000 ~ +3000 Hz
0 Hz
Sets the DSP microphone equalization
pattern.
049 DSP NR LEVEL
012 BEACON TIME
019 CAT RATE
Function
Adjusts the low-cut characteris tics of the
DSP HPF filter.
Adjusts the high-cut characteris tics of the
DSP LPF filter.
Enables/dis ables scanning access via the
m icrophone’s [UP]/[DWN] keys.
The choice of the equipment which
connects to the MIC jack.
Select the analog meter dis play
configuration while the transceiver is
receiving.
Selects the analog meter dis play
configuration while the transceiver is
transm itting.
Enabling/disabling of the “peak hold”
function of the m eter.
Setting of the blanking level for the IF Noise
Blanker.
Not available at this tim e.
065 PG A
Program ming the [A] key (in the Operating
Function Row “q” (MFq)) function.
066 PG B
Program ming the [B] key (in the Operating
Function Row “q” (MFq)) function.
067 PG C
Program ming the [C] key (in the Operating
Function Row “q” (MFq)) function.
068 PG ACC
Program ming the optional MH-59A8J
m icrophone’s [ACC] button assignm ent.
Program ming the optional MH-59A8J
m icrophone’s [P1] button as signment.
069 PG P1
070 PG P2
071 PKT 1200
072 PKT 9600
Program ming the optional MH-59A8J
m icrophone’s [P2] button assignment.
Adjusts the audio input level from the TNC
during 1200 bps Packet operation.
Adjusts the audio input level from the TNC
during 9600 bps Packet operation.
073 PKT RATE
Sets the transceiver’s circuitry for the
Packet baud rate to be used.
074 PROC LEVEL
Sets the compression level for the AF
speech processor in the SSB/AM m odes.
Setting of the m axim um power level for the
current band.
075 RF POWER SET
Available Values
100 ~ 1000 Hz
Default
100 Hz
1000 ~ 6000 Hz
6000 Hz
OFF/LPF/HPF/BOT
H
OFF
1 ~ 16
8
ON/OFF
OFF
0 ~ 100
50
5/6.25/10/12.5/15/
20/25/50 kHz
ON/OFF
ON
DIAL/FREQ/PANE
L/ALL
ON/OFF
2
DIAL
OFF
–
–
CW
SIDETONE,CW
SPEED,MHz/MEM
GRP,MIC GAIN,
NB LEVEL,RF
POWER, STEP
ON/OFF
MHz/MEM GRP
NOR/RMT/CAT
NOR
ON
SIG, CTR, VLT,
N/A, FS,OFF
SIG
PWR, ALC, MOD,
SWR,VLT, N/A,
OFF
ON/OFF
PWR
0 ~ 100
50
ON
–
–
All Multi Function,
All Menu Item ,
MONI, Q.SPL,
TCALL, ATC and
USER.
MONI
Q. SPL
ATC
MONI
Q. SPL
TCALL
0 ~ 100
50
0 ~ 100
50
1200/9600 (bps)
1200 bps
0 ~ 100
50
5 ~ 100 2 ~ 100
(UHF)
2
076 RPT SHIFT
Sets the magnitude of the repeater shift.
0.00 ~ 99.99 (MHz)
2
077 SCAN MODE
Selects the desired Scan-Resume mode.
TIME/BUSY/STOP
TIME
078 SCAN RESUME
Sets the delay tim e for scanning
resumption.
Enables/dis ables split CTCSS/DCS
cording.
Selects the configuration of the front
panel’s SQL/RF knob.
Adjusts the microphone gain level for the
SSB mode.
1 ~ 10 (s ec)
5 sec
ON/OFF
OFF
079 SPLIT TONE
080 SQL/RF GAIN
081 SSB MIC GAIN
082 SSB STEP
Selects the tuning steps for the SELECT
knob on the SSB m ode.
083 TONE FREQ
Setting of the CTCSS Tone Frequency.
084 TOT TIME
0 ~ 100
0
085 TUNER/ATAS
–
FIX: 26
086 TX IF FILTER
1 ~ 13
1 (Dim ) ~ 3
(Bright)
OFF/AUTO1/AUTO
2/ON
60/120/240 Hz
5
3
087 VOX DELAY
088 VOX GAIN
AUTO2
089 XVTR A FREQ
240 Hz
090 XVTR B FREQ
091 XVTR SEL
RF-GAIN/SQL
1
0 ~ 100
50
1kHz/2.5kHz/5kHz
2.5kHz
50 Standard
CTCSS tones
88.5 Hz
Select the Tim e-Out Tim er tim e.
OFF/1 ~ 20 (min)
OFF
Selects the device (FC-30 or ATAS-100/120) to be controlled via the front panel’s
[A](TUNE) key.
Selects the Transm it IF filter.
OFF/ATAS(HF)/AT
AS(HF&50)/ATAS(
ALL)/TUNER
CFIL/FIL1/FIL2
CFIL
Sets the “hang tim e” for the VOX circuitry.
Sets the gain of the VOX circuitry’s input
audio detector.
Allows an arbitrary frequency to be set on
the dis play, to allow direct frequency
readout during transverter operation.
100 ~ 3000 (ms)
1 ~ 100
500 m s
50
0,000,00 ~
9999,999,00 (kHz)
–
OFF/X VTR A/X
VTR B
OFF
Enables/dis ables/selects the antenna port
to be used for Transverter operation.
OFF
–