1. society
2. work
3. contracts

Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
STATE BANK OF INDIA
REGIONAL BUSINESS OFFICE: (I)
R.B.O: BERHAMPORE, GROUND FLOOR,
15, SQUARE EAST ROAD, BERHAMPORE-742101
A.NOTICE INVITING TENDER
Sir,
SBI invites sealed tender in two cover systems from the empanelled contractors under
Category-2b of SBI, LHO Kolkata, for the Interior Furnishing & Allied Civil Work including chair
supply at Nagar Branch under RBO-I, B.Z.O. The other details are as under:
SI.N
1
Description-1
Description-2
Name of work
Interior Furnishing, Chair Supply & Allied Civil For Nagar
Branch BPR Work Under RBO-I, Bidhannagar Z.O, S.B.I
2
Time allowed for completion
45 days including Sundays and holidays
3
Earnest Money Deposit
Rs 20,000/- & is a part of Total Security Deposit. To Submit
4
Cost of tender document
NIL
5
Last
date
and
time
In cover-I(Without EMD in proper form Tender may be rejected
of
submission of tender
6
Date&
Time
of
opening
tender
7
Address
1pm on or before 02/03/2015
3.30pm on 02/03/2015
of
available,
submission & Opening of
Regional Manager, Regional Business Office: (I)
R.B.O: BERHAMPORE, GROUND FLOOR,
15, SQUARE EAST ROAD, BERHAMPORE-742101
Tender Document.
8
Defective liability period
12 months from the date of virtual completion of work
9
Validity of offer
4 months from the date of opening of price bid
10
Liquated Damages
0.5% week subject to a max. of 5% of contract value
11
Security Deposits
5% of the contract value including the EMD amount.
12
Approximate Estimated cost
Rs 19,83,122.50/- +Service tax
of the project
In Case of Tender Opening date is declared as holiday, the tender will open in the next
working day at the same time.
Regional Manager (RBO-I)
(For & behalf of State Bank)
1
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
B.GENERAL TERMS AND CONDITIONS
Dear Sir,
We invite you to quote your item wise rates for the above mentioned work in the schedule
enclosed. Your tender duly filled in, signed and sealed, should be addressed to Regional
Manager of aforesaid address and reach as per date and time mentioned in the NIT. The
tenders will be opened as per date and time (can be changed as per Bank’s discretion)
mentioned in the NIT. The envelop containing the enclosed price schedule, duly filled in,
along with a BANK draft for Rs20,000/- as EMD in favour of the R.M, of aforesaid address OR
SIMPLY SBI, payable at Kolkata, should be super scribed with the “Name of the work, date of
submission and date of opening” as advised herein, on the top. It is suggested that the
tender be sent by registered post/ personally so as to reach this office on or before the due
date and time. Other terms and conditions are as under:
1. No Tender will be accepted after scheduled time and date. Unsealed Tender will not also
be accepted.
2. The contractor should quote rates inclusive of all taxes/duties/levies (i.e. Commercial Tax,
Education Cess, TDS etc. as applicable to a contractor and are subject to deduction at
source by the bank from bills/dues) including wastage, transportation of material to the
aforesaid work site, etc.. The service tax shall be paid extra as per government rule to the
contractor.
3. The tender should remain valid for acceptance by the Bank for a minimum period of 120
days from the date its opening, which may be extended by mutual agreement and
tenderer, shall not cancel or withdraw the tender during this period.
4. Time is the essence of this contract. The contractor whose tender is accepted shall take
up the work on hand immediately and complete the same within 45 days from the date
of receipt of written work order or the date of handing over of the site, whichever is later.
No Extension of time is permissible. However if the contractor does not complete the work
within the prescribed time limit, the bank may consider the extension of time limit for
completion of the work without prejudice of Bank’s right to recover the liquidated
damages as per the terms mentioned in the NIT & detail as under.
5. The delay in completion of work beyond stipulated period and without any valid reasons
shall be subject to liquidated damages @ 0.50% per week subject to maximum amount
equivalent to 5% of the contract amount.
6. The Bank does not bind itself to accept the lowest or any tender and reserve to itself the
right to accept or reject any or all the tenders, either in whole or in part without assigning
any reason(s) thereof. It also reserves the right to hold negotiations with the lowest
tenderer before accepting the same. In case of negotiations, the tenderer should send
2
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
confirmation of such negations in writing so as to reach the bank within 48 hours from the
date of negotiations.
7. The tenders received without Earnest Money Deposit in the required form are will be
consider as Non Bonafied Tender & liable for rejection. No interest shall be paid on the
said deposit.
8. The EMD of the unsuccessful tenderer will be refunded within 90 days from the date of
opening of the tender or finalization of the tender, whichever is earlier.
9. The contractors are requested to acquaint themselves with the site conditions, terms &
conditions, schedule of items and technical specifications of the tender before quoting
the rates.
10. Total Security Deposit: 5% of the value of the contract amount including EMD. Defect
liability period of the contract is 12 months. Total Security Deposit will be refunded after
completion of defective liability period subject to the condition that the defects due to
poor workmanship, materials etc related to the work appeared during this period shall be
rectified by the contractor not later than by 28 days form the date of expiry of the
defective liability period.
11. The Bank under any circumstances will not entertain the request for payment against
material at site. However, payment of running bills could be considered depending on
the progress of actual work done subject to verification of measurements etc by the
Bank’s Engineer.
12. In case, contractor fails to undertake the work at site within 7 days from the date of issue
of work order, the Bank reserve the rights to entrust the work to any other contractor at its
discretion and earnest money deposit of defaulter contractor will be forfeited.
13. The contractor should quote reasonable and workable rates for individual items.
Wherever necessary, contractor, on demand, has to submit rate analysis of desired items
within stipulated period.
14. The contractor shall not assign the contract. He shall not sublet any portion of the
contract except with the prior written consent of the Bank.
15. The contractor shall carryout entire work strictly in accordance with the detailed
specifications and instructions of Bank’s Engineer. If in the opinion of the Bank, changes
have to be made in the layout, the contractor shall carryout the same without any extra
cost to the Bank.
16. The tenderer must obtain for himself on his own responsibility and at his own expenses all
the information which may be necessary for the purpose of making a tender and for
entering into a contract of work and acquaint himself with all local conditions, means
of access to the work, nature of work and all matters appertaining thereto. The
contractor has to arrange by his own of every thing like electricity, water, material
storage space and labor license as required for completion of the work.
3
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
17. This is an item rate tender. The quantities given in the schedule of items are approximate
& payment shall be made only for the quantities executed as per the actual
measurement. The contractor is not entitled for any sort of compensation towards the
materials procured & stored in excess of the measured quantity, if any.
18. The bank reserves the right to increase & decreased the tendered quantity of any or
every item at any stage of the work. Contractor shall execute the increased quantities at
the accepted tendered rate. The contractor’s claim for compensations or damages in
this respect shall not be entertained.
19. The quantities mentioned in the schedule of items are approximate and no further claims
will be entertained for any change in the quantities. Some civil items like plumbing,
sanitary and tiling work in toilets, canteen and other areas are provisional. If landlord
does not execute these works or workmanship of executed work is not satisfactory, under
such circumstances, these works will be executed by the contractor. Contractor shall
quote rate accordingly.
20. The rates quoted by the contractor shall be firm & fix and no variation will be allowed in
individual rates on any account. The rate quoted should be inclusive of all taxes,
duties, levies imposed by the Central or State Govt. or local administration and as
applicable or become applicable during the completion period.
21. The successful tenderer is bound to carry out any items of work necessary for the
completion of the job even though such items are not included in the quantities and
rates. The rates for such items shall be decided by the bank within its sole discretion on
the basis of rate analysis prepared by the contractor by taking into account prevailing
market rates of material and labor involved and 10% to 15% contractor’s profit.
22. The contractor shall study the schedule of items, technical specifications, drawings,
design, etc. for its sufficiency considering all the regulations of local authorities and
supply company and code of standard as applicable at the time of submitting the
tender and shall bring to the notice addition or deletion, if any, in writing along with the
tender.
23. Intending tenderer shall visit the site and make himself thoroughly acquainted with the
local site condition, nature and requirements of the work, facilities of transport condition,
availability of labour and materials, access and storage for materials and removal of
rubbish
24. The contractor shall strictly comply with the provisions of safety code. And also the
Contractor shall strictly comply with the provisions of contract labour acts or any other
act pertaining to the contract labor that may be in force or that may be introduced
during the currency of contract. Compliance of such acts now or subsequently will be at
the contractor’s cost.
4
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
25. This work will be in a functioning branch building & must be carried out without any
hindrance to the functioning of the office/Branch within the complex. The working time
shall be suitably planned to avoid inconveniences to the staff & office and should be
prepared to do it during in night hours.
26. Carriage of material to the work sport & removal of wastes & excess materials from there
shall be done without causing any hindrance to the movement of vehicles & staff. All
waste material shall not be accumulated at the site in view of limitation of space. The
waste shall be disposed off away from the site without any complaints of Civic Authorities
& at the contractor risk & cost.
27. If in the opinion of the Bank the rates quoted by any contractor are found unworkable
keeping in view the specifications proposed and workmanship expected, the Bank may
choose to reject such tenders within its sole discretion and without any notice
to the contractors.
Moreover,
the
Bank
in
such
cases
will
entertain
no
claim/correspondence.
28. Before Commencing the work, Contractor Must get the approval of all the materials
brought to the site for the use on writing by the EIC, otherwise it will be deemed as
unspecified material are being willfully used. All facilities for prior inspection of materials &
& subsequent verification of the work by representatives of the bank made be available,
at cost of the contractor.
29. Thickness, quality, shade, texture and brand etc. of the used material, should be as per
schedule list and as approved by the Engineer in Charge.
30. The work has to be executed in close & effective co-ordination with other executing
agencies & concern department operative in that floor. Material access regulation,
Security measures & permissions required to be observed & obtain from competent
authority of Bank & act strictly according to them.
31. Rates quoted shall be cleaning inclusive of floor, making good to damaged areas due
t.o their workmanship, wall, floor & ceiling or any other material/furniture after completion
of work. Rates shall be inclusive of removing all the debris & any other unserviceable
materials as per direction of EIC.
32. If the contractor performance is found to be unsatisfactory, the bank reserves the right to
cancel in part or whole of the contract & gets the work executed through alternative
means at the entire risk & cost of the contractor by giving seven days notice. In such
cases, the contractor should make good all looses that the bank may incur on account
of same.
33. In case of the contractor abandons the work for any reason whatsoever, the bank shall
issue the final notice to the contractor to remain present at the site on due date & time
as per the notice .In spite of such notice, the contractor remains absent on site on such
due date, the Bank’s Engineer will take the measurement of completed part of the work
5
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
unilaterally, which will be binding on the contractor & the balance work will be got
carried out by the bank through any agency at the entire risk & cost of the contractor.
34. In case of any substandard or poor quality materials used by the contractor in the Bank’s
work, the same shall be replaced forthwith by Bank’s specified materials with bank’s
Caution note. Three such “Cautioned Note” issued by the bank will liable the firm to get
De-listed.
35. The Bank may choose to split up the entire scope of work amongst any number of parties
within its sole discretion irrespective of the lowest rates.
36. Tender in duplicate, will have to submit in two parts Cover-1 & Cover-2 separately sealed
& super scribed with the name of the work. Cover-1 shall contain Annexure –I (i.e. all the
General, technical & commercial terms & conditions prescribed by Bank.) duly filed in by
the tenderer along with enclosures of any stipulation proposed by the bidder & the
prescribed Earnest money deposits (EMD). The cover- II shall contain the offered price
with the tender documents dully filed, in duplicate. No other condition stipulated in
cover–II other than unconditional general rebate shall be accepted.
37. On acceptance of the tender, the successful tenderer shall be given the work order, in
duplicate & the duplicate copy has to be returned duly signed by the contractor as a
token of acceptance of work order including the terms of contract along with their
tender, failure to which their tender is liable for rejection without any notice which please
note
38. SBI has the right to accept/reject any/all tenders without assigning any reasons
whatsoever.
Regional Manager (RBO-I)
(For & behalf of State Bank)
DECLARATION
I/We have understood all the above conditions. If I/We fail to start/ or execute work
within the stipulated period of time, our Security deposit will be forfeited.
Place:
Date:
Signature of Contractor
6
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
C.INSTRUCTIONS TO THE TENDERERS
While quoting for each item of work, the tender should consider for the following, irrespective
whether it has been mentioned or not in the description of the item without any extra
claim/payment:
1. All paper connected with the tender, including these instruction, schedule of items,
technical specification, drawing etc should be signed & returned by the tenderer to
the bank while submitting the tenders. Incomplete tenders are liable for rejection.
2. No altercation shall be made on the tender documents including schedule of items
by the tenderers.Any discrepancy noticed in the tender documents shall be bought
to the notice of the concerned official of the bank & any returned instructions
received from the bank as reply will be deemed to have been incorporated herein
3. The tender should quote his rates & amounts for all items of the tender schedule. All
the rates & amounts quoted should be written both in figures & words & where there is
a difference between the two, the rates given in words will be taken as authentic.
Should there be any discrepancy between unit rate & amount; unit rate shall be
considered as correct one. All arithmetical mistakes noticed during verifications of the
tender shall be corrected.
4. All entries in tender document should be in English & in Ink or typed. All corrections
should be attested under full signature of the contractor. Corrections where
necessary should be made by scoring the wrong words/figures & attesting by full
signature of the contractor. These shall not be erased/overwritten/corrected by
whitener.
5. Tender with corrections and or overwriting if not authenticated will be liable for
rejection. No advice for any change in rate or conditions after the opening of the
tender will be entertained.
6. Rate quoted should be for specified brand only. Contractor cannot be permitted for
use of non-specified brand. If specified brand is not available, equivalent brand can
be used as per permission of bank’s engineer. For civil & interior work, specification of
CPWD shall be followed if there is any doubt about specification of the work given in
the tender.
7. Incomplete tender, conditional tenders, tender received after prescribed time & date
through courier/post or by hand, tenders not confirming to the terms & conditions
prescribed in the tender documents shall be rejected.
8. Tender sum shall be calculated on each page and carried over to the next page.
Tenders shall be submitted in original and duplicate. Final tender sum shall be written
in words also. All corrections, overwriting etc shall be properly authenticated.
Whitener correction pen shall not be used under any circumstance because your
7
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
tender may be cancelled if desired by Bank. The decision of Bank shall be final and
binding on contract. No correspondence shall be entertained by Bank.
9.
CAUTION NOTE: Please note that the contractor quoting abnormally low / erratic
rates (+/- 15% Limit) may be asked to submit rate analysis & performance guarantee
in the form of Bank Guarantee issued by any scheduled Bank as per draft supplied by
the Bank, within a period of one week before award the work. The amount of said
Bank Guarantee shall be equal to 110% of the difference in tender amount quoted
by the contractor and the proposed estimated cost of the work as mentioned in NIT.
Alternatively, the contractor may choose to deposit the said amount in the form of
STDR/FDR in favour of Deputy
EMD in favour of the R.M, of aforesaid address
OR SIMPLY SBI , Kolkata, preferably issued by the SBI. This Bank Guarantee/STDR/FDR
will be treated as an additional security deposit for due fulfillment of contract and will
be retained by the SBI for entire completion period of the project. The contractor shall
undertake not to cancel/withdraw the said Bank Guarantee/STDR. In case contractor
fails to undertake the job within stipulated time or leave the same incomplete or
carryout substandard job, the bank will be at liberty to forfeit the said initial security
deposit and additional security deposit by invoking the Bank Guarantee/en-cashing
the STDR/FDR.
10. The work has to carry out strictly according to the conditions stipulated in tender
consisting the following documents & most workmen like manner.
a) Notice Inviting Tender b) General conditions of contract c) Instructions to tenderer
d) Technical Specification e) Special Conditions of Contract f) Drawings
DECLARATION
I/We confirm that we are submitting our tender duly filed in & rates have been quoted
after thorough study of site conditions & above stated contract documents issued by the
bank. I/we hereby accord our unqualified consent & agreement to the said conditions. .
Place:
Date:
Signature of Contractor
8
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
D.TECHNICAL SPECIFICATIONS.
I) Specification Guide for Execution of Interior Work
1.
MODULAR GRID CEILING: Providing & Fixing of modular grid ceiling at all heights of
600X600X15 mm of Armstrong Mineral Fibre Acoustical Suspended Ceiling
System/Any equivalent Make with (MICRO LOOK) EDGE TILES PRODUCT CODE H1893M WITH ARMSTRONG SILHOUETTE B/R (black Reveal) EXPOSED GRID.
The tiles should have Humidity Resistance (RH) of 99%, NRC 0.50, Light Reflectance
>85%, Thermal Conductivity k = 0.052-0.057w/mK, Colour White, Fire Performance
Class 0/Class 1 (BS - 476) in module size of 600mm x 600mm x 15mm with Bio Block
coating on the face of the tile, suitable for Green Building application, with
Recycled content of 58%.
The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white
flanges incorporating a 6mm central reveal in black colour and with a web height
of 38mm and a load carrying capacity of minimum 15 Kgs/M2. Silhouette, Main
Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide
mitred cruciform junctions. The T Sections have a Galvanizing of 120 grams per M2
& passed through 500 hrs of Salt test.
The Tile & Grid system used together should carry a 15 year warrantee.
INSTALLATION: To comprise main runner spaced at 1200mm centre securely fixed
to the structural soffit using Armstrong suspension system (specifications below) at
1200mm maximum centre & not more than 150mm from spliced joints. The
First/Last Armstrong suspension system at the end of each main runner should not
be greater than 600mm from the adjacent wall.
1200mm long cross tees to be interlocked between main runners at 600mm centre
to form 1200 x 600 mm module. Cut cross tees longer than 600mm require
independent support. 600 x 600mm modules to be formed by fitting 600mm long
cross tees centrally between the 1200 mm cross tees. The 1200mm cross tees to
have central “birdsmouth” notches to facilitate fitting of 600mm cross tees.
Perimeter trim to be Armstrong shadow wall molding (dimensions: 19x7x7x14mm),
secured to walls at 450 mm maximum centers.
ARMSTRONG SUSPENSION SYSTEM accessories manufactured and supplied by
Armstrong World Industries consisting of M6 Anchor Fasteners with Vertical Hangers
made of Galvanised steel of size 26 x 26 x 25 x 1.2mm with a Galvanised Thickness
of 80gsm, A pre Straightened Hanger wire of dia – 2.68 mm of 1.83 m length.,
thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable
hook clips of 0.8mm thick, galvanised spring steel for 2.68 mm with a minimum pull
strength of 110 kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be
used with the main runner.
RATE: Rate shall be include all the items mentioned above/elsewhere in the
contract including all labour, material, equipments & the hardware as required in
complete all respect as per drawing as directed. The area of the ceiling where full
tile size light fixture are installed, will not be deducted from the total quantity
9
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
executed , however the cost of tiles where the full tile size fitting are installed will
be deducted as per the market rate.
2.
The work shall be executed through authorized applicator of Approved Make. The
contractor has to submit the certificate from the company for the use of Approved
Make Sections & boards along with the final bill
Plain Gypsum board false ceiling:
Basic Frame Work: Providing and fixing in position dropped ceiling in two levels
including vertical surfaces in between two level of ceiling surface by using
standard company sections (Gypsteel Ultra) which includes providing & fixing g.i.
perimeter channels of sixe 0.5 mm thick having one flange of 20 mm & another
flange of nylon sleeves & screws , at 610 mm centers, then suspending g.i.
intermediate channels of size 45 mm ,0.9 mm thick with two flanges of 15 mm each
from soffit at 1220 mm centers with ceiling angle of width 25mm X10 mm X 0.5 mm
thick fixed to the soffit with g.i. cleat & steel expansion fastener ceiling section of
0.5 mm thickness having knurled web of 51.5 mm & two flanges of 26 mm each
with lips of 10.5 mm area then fixed to the intermediate channel with the help of
connecting clips & in direction perpendicular to the intermediate channel at 457
mm c/c.
Finished: 12.5 mm tapered edged gyp board ( confirming to IS-2095-2011) is then
screw fix to ceiling section with 25 mm drywall screws at 230 mm centers, screw
fixing done mechanically either with screwdriver or drilling machine with suitable
attachment .
Standard company manufactured sections (Gypsteel Ultra) should be used for the
entire framework .Finally the board of size 6’X4’ are to be jointed and finished so as
to have a flush look which includes filling and finishing the tapered and square
edges of the boards with jointing compound, paper tape only as per
recommended practices of Saint-Gobin Gyproc India Ltd.
General Note for the Item Rate Include: the job include applying two or more
coats of acrylic emulsion paint in the standard procedure of the painting job as
per the shade & finished suggested by the EIC. The cutouts for variety of light
fixture & other equipments etc & the same have to be made with the frame of
perimeter channels of size 20 mm X 27 mm X 30 mm X 0.5 mm thick supported
suitably, no extra will be paid for this . Edge bid has to be used to protect the
exposed gypsum core i.e. cut edges of opening for light fixtures. The square edge
joint shall be filled with jointing compound & paper tape, additional g.i. or c.p.
teak wood support shall be provided for fixing of verity of light fixtures, a.c.
continues grill ,diffusers etc. All section visible from a.c grill shall be painted in black
colour. The final visible plan & elevation area will be considerd for the
measurement purposed. The work shall be executed through authorized
applicator of Saint-Gobin Gyproc India Ltd.The contractor has to submit the
certificate from the Gypsum India for the use of company sections (all) & boards
along with the final bill.The contractor must get the worked checked from the
company’s representative – on one completion of the ceiling & second on
completion of boarding before putting top coat. The work includes to the shape
areas & also the coves as per the lay out & shall be measured in Sqmtr. only.
10
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
3.
S.W.O CASH/TELLER COUNTER:
Basic Structure: Made out of 19mm thk. ISI marked phenol bonded BWP b/board
on vertical sides as well as horizontal top surfaces having work top 900mm deep,
750mm height from FFL.Each counter unit is approximately of 1500mm long divided
with vertical separator having 1 no. drawer unit. The front apron of the table shall
be made up of 19 mm block board placed 6" behind the table front facia with 6"
boxing on all three sides and shall be finished with 1mm thick approved bi coloured laminate. The skirting of the apron shall be a combination of 6" high
1mm thick laminate of blue shades(different tones of blue) .The working top has a
curved front surface projection of 150mm at center on the customer side. From
the curved working top the front apron has a slant angle finished with 1 mm thk.
Laminate of approved make.
Drawer unit: Below the Working Counter there shall be a pedestal unit made up of
12 mm ply from sides & 6 mm ply from base which consisting of 2 numbers sliding
drawers each of 150 mm depth and one deep drawer of remaining depth after
leaving 3 inch skirting from bottom F.L.,for keeping of note bundles fitted with full
panel telescopic drawer slides of Approved Make with individual locking system,
powder coated “D” handle. A wooden member of size of 2 ½ ”X3/4” shall be fixed
between each drawer. Inside surface of drawer unit should be painted with matt
finished synthetic enamel paint.
General: Each counter shall be provided with one keyboard M S trey provided
with telescopic channel, CPU Trolley of Innofit or any other approved make, PVC
wire manager system with necessary cut outs in the structure & A full length foot
rest made up of hard wood 3”X1.5” section shall be provided at 4” above F.L.
Finishes: The entire work station shall be 1 mm bi-colour laminate Finish on
horizontal & vertical surfaces in two colour combination of Approved Make on all
open external sides. It will be in balancing laminate on internal surfaces including
drawers. All Non laminate surface of counter, pedestal is finished with smooth
matching melamine polish. All free edges of block board and ply duly finished with
teak wood beading / lipping as directed.
Rate: Rate shall be include all the items mentioned above/elsewhere in the
contract including all labour, material, equipments & the hardware as required in
complete all respect as per drawing as directed.
4.
FREE STANDING TABLE:Basic Structure: Fabricated out of 19mm BWP b/board with
Tea Tray & drawer unit on one side & Side credenza on the other side of the table.
The Table shall be made of 19mm BWP grade b/board front top sides & front
modesty panel. The table top shall be finished with 1.25 mm thick laminate of
wooden shade FI-1283 Schilesee of Sunmica or equivalent color of Amulyamica or
Timexmica. The table shall have 1 ½”x 1” thick steam beech wood beading on all
free edges of block board with melamine polish. The front top from 9" - 1'0” vertical
curved in portion shall be made with 4nos of flexi ply made to curve as per
drawing finished with 1mm thick Laminate of Approved shade on all exposed sides
and polished from inside. The front apron of the table shall be made up of 19 mm
ply & finished with bi-color skirting of Approved shade as directed.
11
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
Drawer unit: Each table shall be provided with a drawer unit of 21” deep 16” wide
comprising of 1 no. tea tray, 2 numbers of sliding drawers each of 150 mm depth
and one deep drawer of remaining depth after leaving 3 inch skirting from bottom
floor level fitted with full panel telescopic drawer slides of Approved Make with
individual locking system, powder coated “D” handle. A wooden member of size
of 2 ½”X3/4” shall be fixed between each drawer. Inside surface of drawer unit
should be painted with matt finished synthetic enamel paint.
General: Each counter shall be provided with one keyboard M S trey provided
with telescopic channel, CPU Trolley of Innofit or any other approved make, PVC
wire manager system with necessary cut outs in the structure & A full length foot
rest made up of hard wood 3”X1.5” section shall be provided at 4” above floor
level.
Finishes: The entire work station shall be 1 mm laminate Finish on horizontal &
vertical surfaces in two colour combination of Approved Make on all open
external sides. It will be in balancing laminate on internal surfaces including
drawers. All Non laminate surface of counter, pedestal is finished with smooth
matching melamine polish. All free edges of block board and ply duly finished with
teak wood beading / lipping as directed.
Rate: Rate shall be include all the items mentioned above/elsewhere in the
contract including all labour, material, equipments & the hardware as required in
complete all respect as per drawing as directed.
Full height solid/glazed partition (64mm thickness):
5.
Basic Structure: It shall be made from internal frame of size 50mm x 50 mm x 1.6
mm hollow aluminum square tube placed 600mm c/c both vertically and
horizontally, fixed by means of aluminum angle of 25x25X25 mm size for proper
fixity. The Entire Aluminum frame work shall be covered with 6 mm thick ply on both
sides. All open sides of the frame work shall be covered with 12mm thick ply to
cover the entire thickness of partition. The upper portion of the partitions will have
6/8 mm thick clear glass required as per size of glass, fixed with 10 mm thick (F.S)
wooden molding with suggested grooves to cover the full thickness of partition
.The lower portion of partition up to 3ft will have internal frame work as detail in
above. The same shall be then covered by 6 mm thick ply panels to get flush type
partition. A wooden beading of 2 ½”X1/2” shall be provided as all open thickness
of the partition for door opening & fixing of glass. The hinge side aluminum frame
shall be fixed with wooden section. In case of solid partition, the entire surface will
be finished with opaque finished with play & laminate excluding the glass with
same section as mentioned here.
General: All the gaps either vertical or horizontal shall be filled properly with ideal
material. All the vertical members of the partitions shall be carefully inserted/fixed
in the floor (without damaging the floors) & also shall be fixed to the structural
ceiling for proper strength. Necessary provision shall be made in the partition for
Electrical Conduits, switch boards, ac drain lines & ac’s etc as required. The
common member of partition & frame of door will be consider in the item of
partitions .Only below the ceiling area will be consider for measurement purpose,
however the partitions shall be raised 3” above the false ceiling level for fixity for
the ceiling & also all vertical member shall be taken up to the slab/beam bottom.
12
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
Finishes: All the external ply wood components shall be finished with 1 mm thick
laminate in two color combination laminate finish of approved shade on both
sides & also thickness of the partition. All external wooden members shall be
melamine matt polish finish.
Rate: Rate shall be include all the items mentioned above/elsewhere in the
contract including all labour, material, equipments & the hardware as required in
complete all respect as per drawing as directed.
Low height solid/glazed partition (64mm thickness):
6.
Basic Structure: It shall be made from internal frame of size 50mm x 25 mm x 1.6
mm hollow aluminum square tube placed 600mm c/c both vertically and
horizontally, fixed by means of aluminum angle of 25x25X25 mm size for proper
fixity. The Entire Aluminum frame work shall be covered with 6 mm thick ply on both
sides. All open sides of the frame work shall be covered with 12mm thick ply to
cover the entire thickness of partition. The upper portion of the partitions above 3’
level have 12 mm thick clear glass with all open edge polished & necessary
cutouts as directed, fixed with glass bracket. In case of solid partition, the entire
surface will be finished with opaque finished with play & laminate excluding the
glass with same section as mentioned here.
General: All the gaps either vertical or horizontal shall be filled properly with ideal
material. All the vertical members of the partitions shall be carefully inserted/fixed
in the floor (without damaging the floors) for proper strength. Necessary provision
shall be made in the partition for Electrical Conduits, switch boards, ac drain lines
& ac’s etc as required. The common member of partition & frame of door will be
considered in the item of partitions. To the shape on site measurement will be
considered. The partitions will have a cutout in glass for tray for voucher
movement between counter.
Finishes: All the external ply wood components shall be finished with 1 mm thick
laminate in two color combination laminate finish of approved shade on both
sides & also thickness of the partition. All external wooden members shall be
melamine matt polish finish.
Rate: Rate shall be include all the items mentioned above/elsewhere in the
contract including all labour, material, equipments & the hardware as required in
complete all respect as per drawing as directed.
Storage Cabinets/credenza: General Purpose of Various sizes & heights as directed
7.
a) Filling cabinets With Sliding Shutter: It shall be made of 19 mm thick board on all
five sides while back surface shall be made of 6 mm ply. The storage space will be
separated by 19 mm block board at suitable location so that each block will be
500 to 750 mm equal parts. The sliding shutter shall be provided with Godrej lock,
Ebco/Hettich to be fitted for bottom running sliding doors side line 56 without silent
system assembly & handle of standard quality to be flush with ply/blockboard.The
exposed surface shall be laminate with 1 mm thick laminate of approved colour.
The inside surface shall be finished with putty & enamel paint over a coat of
primer. The bottom of the cabinet is to be fixed to a 3” x 1.5” teak wood
framework polish finished & free edges of block board shall have polished teak
wood half round moulds out of 20X20 mm section.
13
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
Rate: Quoted rates shall include cost of all material, labour & necessary hardware
viz. handles, locks with key in duplicate, approved sliding channel of Ebco
make/Equivalent etc complete in all respects.
b) Filling cabinets With openable shutter : Low height/Full height as per drawing:
Providing and placing in position Storage units fabricated out of 19mm thick BWP
block board on all sides, backing and separators will be of 6mm thick BWP ply,
shelves will be of 19mm thick BWP solid ply. There will be 19mm thk. Ply shutters of
full length with powder coating louvers matching with the color of the laminate for
air circulation fixed with Auto- hinges at approx. 3ft.The top, sides, shutter front and
back sides (if exposed) to be finished with 1mm thick bi-colour laminate with
necessary grooves and the exposed edges of block board should be finished with
6mm t.w. lipping. There should also be a 75 x 12 mm t.w. skirting with grooves as
per design polished in matching tone. Inside of the unit will be painted with putty &
synthetic enamel paint over a coat of approved primer.
Rate: Quoted rates shall include cost of all material, labour & necessary hardware
viz. handles, Multipurpose locks with key in duplicate, S.S hinges, magnetic
catches, D" type steel matt finish metal handles etc complete in all respects.
8.
Column/Wall Paneling: Basic Structure: Providing & Fixing of wall paneling/column
encasing for all heights by putting Aluminum Frame work of size 37.5X25X1.2 mm
thick at suggested interval ,fixed with 1”X1”X1” Al. angle for proper fixity (not more
than 2ft on both direction, covered with 6mm thick ply fixed on entire frame work
.the paneling should have necessary cutouts for electrical conduit/switch
boards/boxes. The entire paneling shall be constructed in complete line & level by
putting necessary packing as per the site condition.
For Wall/Column veneer paneling with 37.5 mm x 25 mm x 1.5mm hollow
aluminum square tube frame work placed at 450mm / 600 mm c/c as per site
condition screwed to the wall and finished with 4mm veneer of approved shade &
brand duly polished over 12 mm BWR ply complete.
Finishes: All the external plywood components of entire paneling shall be finished
with 1mm thick 2 color combination laminate finish. Skirting of 100mm high x 12
mm thick polished Teak wood or steam beech wood skirting with NC lacquer in
Matt finish. For veneer paneling
Rates: Quoted rates shall include all necessary materials, accessories and labour
and also allow provisions for electrical/telephone/computer wiring conduits &
switch boxes etc. complete with necessary jacking /thickening of panels to
accommodate conduits/ switch box etc as directed.
9.
System Table In Server Room: The unit will be a running table made of 19mm thick
block board/plywood of sides & top, back out of 6mm BWP ply having width 750
mm (w) x750mm (h). At each 1000 to 1200mm length, the unit shall have one tea
trey & one drawer and one cupboard provided with telescopic channel.
Measurement shall be in running meter length. Necessary vertical support (19mm
block board/ply) hall be provided for drawers as specified elsewhere in the tender.
14
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
General/Finishes: There should be provision for 2 numbers keyboard & cable
manager system with necessary cutouts in top surface. The entire counter type
workstation shall be 1 mm thick laminate finish of 2 color combination on external
sides & in balancing laminate finish on internal surface including the drawers. All fre
edges should be beaded properly & members shall be melamine matt polish finish.
Rate: Rate shall be include all the items mentioned above/elsewhere in the
contract including all labour, material, equipments & the hardware as required in
complete all respect as per drawing as directed.
Side unit/credenza:
10.
The side unit shall be made of 19mm thick BWP grade block board for sides, top,
bottom , divider shelve back with 6 mm BWR ply. The unit is having the size of
400mm x 750mm & approximate length of 1 mtr. Consisting of 1 no. of drawer &
cupboard of length 21” & rest will be made as shelve with an intermediate 19 mm
block board at center. All exposed portions like top, side & shutter to be finished
with 1mm thick decorative laminate & inner surface with mat finished enamel
paint. The rate also inclusive of all approved fittings like lock, handle, hinges &
telescopic channels etc complete in all respects as directed.
Flush Door:
11.
It shall be made from 35 mm thick factory made shutter of Century/Mayor / Mars
/approved ISI consisting of solid core block of board bonded with phenol
phormaldehyde synthetic resin conforming to IS: 848 and finished on both faces
with teakwood veneering of 3.5 mm thick, including providing and fixing `T' type
second class teakwood perimeter beading fixed by means of approved quality
neoprene based adhesive and nailing @ 300 mm max.
In case of Glazed Door, the same will be made of with above specification with
8 mm thick float glass from 3ft finished floor level up to 6" below the door pasted
with etching as per design & finished with 1.0mm thk. Approved Colour laminate
sheet of approved make on both sides.
General: the door shall be fixed with all necessary hardware fittings such as 125mm
long S.S. butt hinges [for each shutter] (vertical spacing not exceeding
600mm),door stopper, 6lever Godrej Mortise door lock finishing etc. all conforming
to IS : 2202. All free edges shall be duly polished with 3 coats of lacquer melamine
and fixed to the partition frame.
Rate: Rate shall be include all the items mentioned above/elsewhere in the
contract including all labour, material, equipments & the hardware as required in
complete all respect as per drawing as directed.
15
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
I) List of Approved Brand and/or Manufacturer for Interior Furnishing Work.
SR.
NO.
1
Description
Name of the manufacturer
a) Locks
b) Floor Spring, patch Fittings
c)door closer/stoper
Night Latch
Glazing
Godrej/Ebco/Hettich
EVERITE,, Dorma/ Godrej/
Door set/ebco/0zone SS mat finished-push type only
Godrej/Doorset/Europa of S.S brush Finished
Aasahi , TATA, Modi Guard or Saintgobain
4.
Ply wood /B. Board All BWP
grade Confirming IS 1659/303
Globe Ply / Green Red optima /Sylvan/ArchidPly
equivalent as approved by Bank’s engineer.
5
Century /royaltocuh/SunMica/amulymica
Texture & Colour as approved by Bank.
Green/Century/Sylvan
6.
7.
Laminate-1/1.25mm thickness
confirming IS-2046/1995
Flush Door (B.W.P.)
confirming IS-2202 (Part-1)
Teak Wood Veneer (Natural)
Mineral fiber board ceiling
8.
Gyp board False ceiling
India Gypsum Ltd./USG
9
Handles, tower bolts, Drawer
slide channels Telescopic,
M S Key board trey without
mouse
Vertical blinds
CPU Trolley
Ebco/Hettich /Innofit/equivalent
bottom mounted
Ebco/Hettich/Innofit /Featherlite
Featherlite/Godrej/Wipro
16.
Modular items like chairs,
storage units, drawer units
Chemical Adhesive
Motorized/
Manually
Operated Blind
Aluminum Composite Panel
17.
Adhesive
Movicol / Fevicol / Aralditeicol / Araldite.
18.
Vinyl Flooring
Regent Winner/Armstrong/any equivalent
19.
Aluminum Tubular Section:
20.
Melamine
Minimum
1.5
mm
Jindal/Hindalco/Indal(2”X1”/1”X1”)
Asian Paint,Shalimar,ICI
2.
3.
6.
10
11
12
13
14.
15.
Century/ Green/Any Equivalent As Approved by EIC
Armstrong /USG/Owa
premium
quality
Vista/EGL/equivalent.
Ebco/hettich/Innofit/Featherlite
Pidlite/Quickfix/ Latticrete
Vista Levolor/ MAC/ Hunter Douglass
Aludecor /Alex /Alubond or Alstrong
thick
of
III) List of Approved Brand and/or Manufacturer Civil Work.
SR.
NO.
1a
b
Description
Name of the manufacturer
Sanitary Fittings
Plumbing Fixture
Parryware/Hindware/Cera/Nirali
ESSCO/Parryware
c
GI Pipes
TATA( Medium)
2.a
Synthetic
enamel,
Distemper, plastic emulsion
Wall Putty
Glazing
Berger /Asian /Dulox /equiv
b
3.
Birla White/ J.K white
Aasahi , TATA, Modi Guard or Saint-Gobain
16
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
4
Cement
JK. Ultratecg, Acc/Lafage/equiv
5
Sand
Locally available good quality sand approved by EIC
6
Ceramic tiles
Morbito/Johnson / Somany/ Premium/equiv
7
8.
9.
10.
Double glazed vitrified tiles
Texture Paint
Vertical Blinds
UPVC Window
Marbito/ Kajaria/ somany/Nitco
Berger /Asian /Dulox/Nerolac
Vista Levolor/ MAC/
Finesta/Wintech/Any Equivalent Approved by EIC
Caution Note:
Bidders are advised to quote their rates after due consideration of the following pertinent:

Bank reserve the right to insist on selection of material, workmanship, detailing &
finishes, which they consider as appropriate & suitable for intended use. The
contractor is not eligible for extra on this account.

Bank will require the contractor to produce samples of all materials, accessories &
finished prior to use in the site. There by submitting the list of selected material
approved by Bank’s Engineer from the sample & then after the material can brought
to site for carry out the work. Failure to comply with these instructions will result in
rejection of work. All materials specified above shall be used only after quality
check/inspection/approved by EIC.

Whenever decorative ply wood veneer/ Laminate are specified, it must be ensured
that the specified veneer or laminate shall be matching veneer/laminate as
directed. The grains of veneer & the colors of laminate are as per the approved
shade. Bank have right to reject if above specification is not adhered to. Whenever
polishing is specified, it should be high quality melamine finished sprayed or hand
applied to high gloss or matt as directed at site & strictly be carried out as per
Manufactured specification

The dimensions provided in the drawing as well as in schedule are likely vary slightly
according to the size available in the premise are where they are to provided or
placed. Bank has the right to slightly modify the dimensions of items to suit the site &
no claim therefore shall be made by the contractor.

In all cases of measurement will be made on net items as supplied & installed in site.
Wherever areas are furnished in square meter for items, such as carpet, vertical
blinds, curtains etc, payment will be made on actual area laid to suit the shape &
size of the room. The tenderer should note that all cutting wastages ,stitching ,jointing
& several special features such as pleats ,overlap ,hem etc shall be absorbed by
them within the quoted rates & no separate payment will be made for above &
similar items. The partitions will be measured in visible area (below false ceiling
17
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
portion) however the supported frame should be provided & anchored in to the
ceiling. The frames shall be covered with 6 mm thick plywood above false ceiling
within the quoted rate.

The successful tenderer shall make cut-outs for tube light, spotlights, duct doors for
specified size, grill etc in the false ceiling including providing additional supports
around the cut-outs & also support from the support from the ceiling within the
quoted price. Actual “seen” surface plan area & vertical will be measured & paid
for. The cut-out area each more than 0.5 Sqmtr will be deducted from the actual
“seen” plan area measurement.

The successful tenderer shall provide brass oxidized hardware fittings of approved
quality having ISI marked as listed above. Samples of all hardware fittings shall be got
approved by Bank Engineer well in time, before procurement

The successful tenderer should arrange labour accommodations outside the
premises at his own cost

The work has to be carried out in phases without disturbing in banking hall. Necessary
barricading of the area of the work from the rest area shall have to arrange by the
contractor at no extra cost. In addition to this necessary shifting of minor goods as
required during progress of work such as table, almirha, files etc shall be taken care
by the contractor within his quoted rates.

At the time of handing over the site, if any scratches or decoration of above
specified material as used is being observed, then Bank shall have the right to insist
application of another coat or replacement of the material as required

The challan of the materials or the invoice or the certificate from concerned
companies will be required to be submitted if demanded by bank’s engineer at the
time of submission of the final bill. If the approved brands mentioned as mentioned in
the item are not available or requisite shade/ quality is not available, other brand as
approved by the Bank’s Engineer only to be used for the work. Decision of bank’s
engineer shall be final and binding on the contract.
Declaration
I/We confirm that we shall certify the material from Bank’s engineer/Architect prior to use in
site as per the above list. I/we hereby accord our unqualified consent & agreement to the
said conditions.
Place:
Date:
Signature of Contractor
18
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
E.SPECIAL CONDITION OF CONTRACT
1. Setting out the work: a)The contractor shall set out the work and shall be responsible for
the true and perfect setting out of the same and for the correctness of the positions,
levels, dimensions, and alignment of all parts thereof and get it approved by the
consultant/ Bank’s Engineer before proceeding with the work. If at any time any error in
this respect shall appear during the progress of the works, irrespective of the fact that
the layout had been approved by the consultant/ Bank’s Engineer the contractor shall
be responsible for the same and shall at his own expenses rectify such error, if so,
required to satisfaction of the SBI.
b) The dimension provided in the schedule as well as in the drawing are likely to vary
slightly according to the size & space available in the Premise Area where they
are to be provided or placed, Bank have the right to slightly modified the
dimensions of the items to suit the site & no claim therefore shall be made by the
contractor.
2. Protection of works and property: The contractor shall continuously maintain adequate
protection, of all his work from damage and shall protect the SBI’s properties from injury
or loss arising in connection with contract. He shall make good any such damage, injury,
loss due to his fault or negligence except which are due to causes beyond his control.
3. Inspection of Work: The Bank’s Engineer/Consultant or their representatives shall at all
reasonable time have free access to the work site and/or to the workshop, factories or
other places where materials are lying or from where they are obtained and the
contractor shall give every facility for inspection and examination and test of the
materials and workmanship.
4. Quality of Materials, Workmanship & Test: All materials and workmanship shall be best of
the respective kinds described in the contract and in accordance with Bank’s
Engineer/Consultant instructions and shall be subject from time to time to such tests as
the Bank’s Engineer/Consultant may direct at the place of manufacture or fabrication
or on the site or an approved testing laboratory. The contractor shall provide such
assistance, instruments, machinery, labour and materials as are normally required for
examining measuring sampling and testing any material or part of the work before/after
incorporation in the work for testing as may be selected and required by the
Architect/Consultant.
19
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
5. Obtaining Information related to execution of work: No claim by the contractor for
additional payment shall be entertained which is consequent upon failure on his part to
obtain correct information as to any matter affecting the execution of the work nor any
misunderstanding or the obtaining incorrect information or the failure to obtain correct
information relieve him from any risks or from the entire responsibility for the fulfillment of
contract.
6. Works to be measured: The Bank’s Engineer/Consultant may from time to time intimate
to the contractor that he required the work to be measured and the contractor shall
forthwith attend or send a qualified representative to assist the them in taking such
measurements and calculation and to furnish all particulars or to give all assistance
required by any of them. The contractor or his authorized representative shall sign all the
pages of the measurement book in which the measurements have been recorded in
token of his acceptance All authorized extra work, omissions and all variations made
shall be included in such measurements.
7. Bill Submission Format: The bill shall be as per tender specification as detailed below
along with Detail Measurement Sheet. Bill will not be accepted if detail calculation sheet
of the quantity executed at site is not being attached. If required then the contractor
may be ask to submit the Manufacturing certificate in due course of bill checking period
SI.
Descrip-
No
tion
Unit
Ted
Ten
Act qty
rate
qty
(L/B/D)
Ted amount
Act amount
I/We hereby declare that I/We have read the above terms and conditions /instructions
carefully and fully understood and will abide by the same.
Signature of the tenderer with seal
Date:
Place:
20
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
Interior Furnishing & Allied Civil Work Including Chair supply of Branch BPR at Nagar
S.B.I & E-Corner: Schedule of Quantities
SI.No
1.
2.
3.
4.
Description of work
MODULAR GRID CEILING: Mineral Fiber
Acoustical suspended ceiling system/(Dune
Micro look Tile): P & fixing false ceiling with
600x 600 mm dune micro look ceiling tile of
"Armstrong" with 15mm flange stitched
suspension black reveal silhouette grid
system framework with Aluminum channels
etc. complete in all respect & finish with
proper line & level as per manufacturer
specification. The level of ceiling shall be
decided considering light fixtures, ceiling
fans and after discussion with engineer in
charge. Contractor Must Comply with the
Technical Specification as in Tender while
executing the Item.
PLAIN FALSE CEILING INCL. DROP: Providing
& Fixing in position Plain False ceiling in
Gyp. board of 12.5 mm thick for horizontals
& verticals fixed over G.I. Frame work as
specified by
Indian Gypsum Co. Ltd
finishing with paper tape and jointing
compound and application of acrylic
emulsion paint to prepare finished surface
including making cut outs & all necessary
arrangement for electrical & A.C fittings as
directed complete in all respects. The job
is to be completed strictly as per
Manufacturers specification & the Tender
Technical Specification herein). This item
also includes the dismantling of existing
plain ceiling & disposing the same as per
Local Municipality Norm.
POP CORNICE: Providing & fixing 75 x 50
mm plaster of Paris Cornice moulding to
the intersection of masonry wall and
gypsum ceiling complete with Final
Painting .The design Parten of POP shall be
Approved by EIC. Cost includes material,
labour tools & tackles etc to complete in all
respect.
SWO (Teller) COUNTER WITH DRAWER UNIT:
Providing and fixing of Single Window
counter (Apprx. 1500mm x 900 x 750mm) as
per drawing made out of 19mm thk. BWP
b/board for top, sides etc and front panel
finished with 1 mm laminate having one
drawer unit finished with all necessary
hardware as directed by EIC. Detail Work
as per the Tender Technical Specification.)
Amount
Unit
Qty
SqMtr.
110.00
SqMtr
54.00
RMtr.
30.00
RMtr.
8.40
Rate (Rs.)
(Rs.)
21
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
5.
a)
P/F/F The front glazed portion of Single
Window Counter above the working table
top (from 2'-10" to 5'-0" height) with 2 nos. of
12 mm thick Toughened float glass leaving
a gap of 2" between the two glass panels
so as to allow conversation between the
customer & the cashier & a cut out of 8" x
8" semicircular shape at the central bottom
part of the transaction top .There will be
etching in the glass as directed. The edges
& the cut outs of glass shall be finished with
mirror polish. The glass shall be fixed on the
wooden framework of the counter partion
of in between 2" x 2" Sal wood post with 1" x
3/4" teak polished bead/ concealed SS
finished D brackets etc complete as
directed.
FREE STANDING TABLE: Providing & making
Tables of different sizes fabricated out of
19mm BWP b/board for sides, top, drawer
facia & the Modesty panel Specification
including the fixing of one Drawer unit
finished with 1 mm thick Laminate& fitting
of all necessary hardware etc complete in
all respect .The Contractor must executed
the job as mentioned in the Technical
Specification of the Tender. Following are
the various size of table to be installed in
the branch as directed by EIC.
Branch Manager Table : 6' x 3' 0" x 2' 6"
b)
Service Mgr/ Officer Table: 5'x 2' 6" x 2' 6"
No.
3.00
c)
Clerical Table : 4.5'x 2' 6" x 2' 6"
No.
2.00
d)
Grahak Mitra Table: 8’ x 2'x 2"6” with table
top to have 12mm thick special quality
tinted glass fitted with 75mm high stainless
steel studs to the main table structure.
Low Height solid/partly glazed Partition: [In
the side & Intermediate partition of SWO
counter & also Officer Workstation as per
the drawing].
Providing & erecting low
height partly glazed double skin partition
inner frame made out of 50mm x 25 mm x
1.6 mm hollow aluminum square tube
placed 600mm c/c both vertically and
horizontally excepting the glazed portion
covered by 6mm BWP ply on both sides
properly screwed to the aluminum
framework and both faces finished with
1mm laminate etc complete in all respect.
Work strictly comply with as mentioned in
Tech. Specification.(Glass Portion will be
paid separately)
No.
1.00
SqMtr.
24.50
6.
7.
SqMtr.
6.30
No.
1.00
22
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
8.
9.
10.
a)
b)
c)
11.
Low height Solid Partition with Flush Door:
[In back side of SWO counters].The
specification will be same as in si.no.7
&made up with solid only without any glass
work. There shall be flush door of size
Approx. (2'3"X5') made up with 32 mm thick
approved shutter of ISI marked, finished
with bicolor 1mm thick laminate with SS
heavy duty hinges having wooden
beading/leaping of size 3”x1.5”
of
teak/malasaysian wood with melamine
polished. The doors shall be opened on out
side (passage side) with a night latch lock
system which shall be fixed suitably for
outside opening. Cost includes all the
labour, material & hardware fittings e.g.
Night Latch cum handle, SS heavy duty
hinges, door stopper, door closure etc.
complete in all respect as directed By EIC .
Full height glazed partition/solid partition:
64mm thickness: Providing & erecting full
height double skin solid partition made out
of 50mm x 50 mm x 1.6 mm hollow
aluminum square tube placed 600mm c/c
both vertically and horizontally covered by
6mm BWP Ply on both sides and finished
with 1mm Laminate complete with 100
x12mm polished teak wood skirting etc as
detail in Tender spec. Measurement of
height shall be taken from F.L up to the
False
ceiling
underneath.(For
Billing
purpose, Glass work in Glazed F.H. partition
shall be measured separately).
Providing & Fixing of Machine Polished Float
Glass in FHP/LHP
enclosed by wooden
partition with teak wood moulding bead as
per specification & or wherever necessary
required patch fitting & other accessories
of Godrej/equivalent make.
Glazing with 6mm clear float glass In F.H.P
SqMtr.
14.95
SqMtr.
31.70
SqMtr.
6.00
SqMtr.
8.00
SqMtr.
7.40
RMtr.
3.10
Glazing with 8mm clear float glass In L.H.P
Glazing with 12 mm Toughened glass
(Include top & bottom patch fittings for
Fixing the glass –where fully glazed partition
required)
System Running Table: P & Fixing System
room work station 1820mm (L) x 750mm (D)
x 750mm(H) made out of 19mm BWP
b/board for top and sides , back out of
6mm BWP ply with 1 no. drawer unit
comprising of 1 no. tea tray, 1 no. 150mm
drawer and 1no. cupboard drawer sides
made out of 12mm BWP ply and front with
23
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
12.
13.
a)
b)
14.
15.
19mm BWP B/board, work top to be
finished with 1mm laminate and exposed
sides and drawer facia to be finished with
1mm laminate and inside surfaces to be
finished with French polish, complete with
all necessary hardware like locks, handles,
hinges, ball catch, key board, CPU Trolley
etc as in Tender Specification.
SIDE UNIT: Made out of 19mm block board
for top and sides 450 mm deep and 750
mm high approximate length of 1 mtr.
Consisting of 1 no. of drawer & cupboard
of length 21” & rest will be made as shelve
with an intermediate 12 mm BWP Ply wood
at center. The top and sides to be finished
with 1mm laminate & inside surface finished
with melamine polish & the detail as in
Tender Specification.
Filling Cabinets/Storage Unit: Providing and
placing in position 450 mm deep storage
cabinets made of 19mm BWP b/board for
sides, top, bottom and shelves and shutters
and back with 6mm BWP ply. All the
exposed sides top and front to be finished
with 1mm laminate and inside with French
polish. The exposed ply to be covered with
teak wood polished lipping. The job is to
completed with all necessary hardware
fitting & strictly complying to the Tender
Specification.
Filling Cabinets with Sliding Shutter:
(Detail in Tender Spec.)Location As in Drwg.
Filling Cabinets with Openable Shutter:
(Detail in Tender Spec.)
400 mm wide plywood/block board
furnished with laminate: The location is
where back side filing tables are available.
This shall be made up with 19mm thick
block board of 400mm wide will be
provided connecting back side filling
cabinet with a vertical support of block
board 19mm thickness and table top at
same level i.e. 750mm with a intermediate
shelve with 19 mm block board in centre.
Column/ Wall paneling: Providing & fixing
Wall / Column paneling with 37.5 mm x 25
mm x 1.5mm hollow aluminum square tube
frame work covered by 6/12 mm thick
BWP ply and finished with 1.00 mm thick
laminate/ 4 mm thick veneer pasted as
per design and 100 x 12mm teak wood
skirting polish finished including provisions
for providing electrical switch box etc
complete as per the Tender Specification/
No.
5.00
SqMtr.
12.10
SqMtr.
8.80
SqMtr.
3.20
24
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
a)
b)
16.
17.
18.
19.
20
Paneling Work with Laminate :
(Detail in Tender Spec.) Location In Pillar
Paneling Work with Veneer :
(Detail in Tender Spec.) In wall As in Drwg.
Shutter Box Paneling with ACP: Providing &
fixing Providing & 3 mm thick Aluminum
composite panel cladding to Shutter/Box
paneling of exterior/interior grade with 37.5
X25 approx 1.1 mm thick tubular section
aluminum frame work of required Mfgr. Of
brand Aludecor /Alex /Alubond or Alstrong
etc of Approved shade as directed both
horizontally & vertically @ 600 C/C with 3
mm thick PVDF coated on ACP with virgin
LPDE core, duly treated with silicon sealant.
Door Frames: P/F/F Door frames made out
of 4" x 3" /3" x 1.5" clear Steam Beech wood
free of knots and proper rebates and
grooves be made before fixing to the wall
& finished with melamine polish with
necessary approved M.S holdfast with split
ends fixed with G.S.screws including
grouting with 1:2:4 concrete in brick work
and/or with rawl plug in RCC construction
and/or properly screwed and fixed in
Partion as directed etc complete.
Partly Glazed Flush Door: Providing and
fixing partly glazed solid core flush door
35mm thick conforming to IS: 848 finished
with 1mm thick laminate on both sides and
glazing with 8 mm thick clear glass from
950mm to a height 2000mm from FFL or as
directed. Complete with all accessories like
100mm heavy duty stainless steel hinge,
door stopper,6 Lever mortise lock etc. as
per the Tender Specification. Location in
F.H.P as mentioned in Drwg.
Solid Core Flush Door : Providing and fixing
solid core flush door 35mm thick
conforming to IS: 848 finished with 1mm
thick laminate on both sides complete with
all accessories like 100mm heavy duty
stainless steel hinge, door stopper,6 lever
mortise lock etc. as per the Tender
Specification. Location In B/Wall as in Dwg.
Main Entrance Frameless Glass Door:
Providing & Erecting fully glazed frameless
glass door made out of 12mm thick
toughened glass work with pencil polish
edges all around. Door shall be fixed with
double leaf (2.5ft each) at main entrance
& the top edge firmly connected with solid
partion which further jointed to roof
lintel/beam through proper wooden frame
work & glass shall be fitted with PATCH
SqMtr.
28.40
SqMtr.
6.10
SqMtr.
4.30
CuMtr.
0.30
SqMtr.
7.81
SqMtr.
9.76
SqMtr
3.62
25
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
21.
22.
23.
24.
25.
26.
27.
28.
FITTING assembly inclusive of top and
bottom patches, Floor spring & all
necessary hardware such as Bottom lock,
SS brushed handle of 2’0” long 1”dia on
both sides. Cost of Floor spring & Etching
design on glass door paid separately but
other accessories mentioned here are
inclusive in the rate which also include the
dismantling of existing Door. Detail as per
drawing as directed by EIC.
Providing and fixing door closure of
Godrej/doorset/sterling of two speed
(Heavy duty, Light Weight, thin type
code:3976) as approved by EIC.
Floor spring: Providing and fixing floor spring
of Godrej/ Everite/ Dorma two speed in
floors for fixing flush doors. Necessary pivot
shall be provided at bottom and top so
that the flush door shall be operated. The
cost includes cutting and making the good
of the floor etc complete as directed.
Frosted Film: P & Fixing of 3M Make Sparkle
Series etching film (frosted) to Main door
Glass and other glasses as directed, cut
and fixed as per approved slander paten &
design of Bank. (Base price of 3M film
Rs.110/- per Sqft inclusive of Tax, supporting
cash memo/ bill to be produced for
payment of this item including certificate
from 3M dealer certifying use of the
product).
Providing & fixing Stainless Steel Lettering (
carrying branch name)and logo of S.B.I as
directed .SS Steel letter 6” size to 12” ht as
directed by Bank.
Vinyl Printing – Providing & fixing vinyl
sticker to wall paneling/Glass work as per
banks slandered design including all labour
complete as directed.
Providing & fixing Writing ledge of size
750mm x 500 mm x 150mm with pigeon
hole type box below the top made out of
19mm block board finished with 1mm
laminate fixed/ mounted on the wall with
Angle Support. With a 12mm thick machine
polished clear glass top fitted to the main
structure with 4 nos. 75mm high stainless
steel studs.
Providing & fixing Suggestion box of size (
450mmm x 150mm x 300mm ) made out of
19mm block board finished with 1mm
laminate and openable shutter with
locking arrangement.
PINUP BOARD: Providing, fitting in position
12mm thick pin-up board made of soft cork
board finished with the fabric (base rate
No.
9.00
No.
2.00
SqMtr.
21.30
No.
30.00
SqMtr.
7.50
No.
1.00
No.
2.00
SqMtr.
1.50
26
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
29.
30.
31.
32.
33.
A.
Rs.240/- metre) as approved, matching
with the colour scheme of the banking hall
with a R.W. moulding all around the edges.
P & placing supplying 300 x 300 x 250mm
high plant holders made out of 19mm BWP
B.Board for all sides and bottom finished
with 1mm laminate on outer surfaces and
edges finished with polished teak wood
lipping and inner surface with enamel paint
finish.
P & supplying artificial plant ( to be paid on
the basis of actual cost on production of
cash memo/ bill + 15 % towards
procurement, handling and fixing etc ).
Dressing With Puffy in Locker: Providing &
fixing 5mm thick mirror having polished on
all open edges for locker room made out
of 5mm thick glass with base of 12mm BWR
ply with teak wood polished moulding
beads on all sides. The unit have a seatty
with castores with upholstered ( base rate
Rs. 240/per metre ) rubber seat of
size:1'4"X1'4"x1'4".
Providing and fixing wood stool made of
Sal wood of 100mmx100mm post with
bracing of 50mmx50mm on all four sides
and finished with 19mm thickness block
board. The surfaces shall be finished with
primer and paint. The height of the stool will
be 300mm. The size of tool will be 2’8”x2’8”.
Buy Back of all old existing unserviceable
Wooden Furniture Only Consisting of all
type of partitions/ paneling/ Tables/ work
stations/ wooden cabinets/ doors & S.W.O.
counter etc including dismantling and
taking out the same from site. (The
Contractor should Visit the site &
quantify/evaluated properly before quoting
the same as salvage value & this value
shall be deducted from the Tender Amount
.If any other items besides above will be
added in the list, then same item’s salvage
value will be calculated separately.
No.
6.00
P.S.
1.00
Set.
1.00
No.
1.00
L.s.
1.00
(-)
5000.00
Total Tender Amount (Rs.)
(Both Words & In Figure)
27
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
B.
SUPPLY OF CHAIRS & DINING SETS: Supply &
Fixing in position of chairs & storage units
including
all
material,
labour,
transportation, VAT etc. cost to place in the
branch premise as mentioned below as
directed by Bank. Warranty obligation, by
the manufacturing company will remain on
the selected bidder. Company may take 3
to 4 weeks for supply of these items.
Contractor should place order immediately
to the company or its authorized dealer for
purchase of these materials in order to
avoid unnecessary delay on this matter.
1.
2.
3.
4.
5.
Revolving, tilting, adjustable Medium back
chairs with PU Arm of ALM-444 of
Elite/equivalent of Durian/ Method ox) For
Staff: MRP: Rs 4000 to Rs 5500 at Kolkata.
Revolving, tilting, adjustable, High back
chair with PU arm of RNW-501 of
Elite/equivalent of Durian/ Method ox) For
B.Manager: MRP: Rs 7000 to Rs 8500 at
Kolkata.
Visitor Fix chair Made up of M.S Pipe with
powder coated Finish Seat & back
cushioning of GCS-73 of Elite/equivalent of
Durian/ Method ox) For customer : MRP: Rs
3500 to Rs 5000 at Kolkata.
Visitors lobby & perforated chair (3 Seater)
made up of with M.S bar & pipe with
powder coated finish , seat & back
cushioning for lobby of LWC-108 of
Elite/equivalent of Durian/ Method ox)
MRP: Rs 10000 to Rs 11600 at Kolkata.
Supplying & Fixing of PVC round / rectangle
table of 4’ size with 4 Nos. chairs.
Make: Neelkamal/ Supreme.
No.
4.00
No.
1.00
No.
4.00
No.
2.00
Set
2.00
B
Total Chair Supply & Install Value(Rs.)
(Both Words & In Figure)
28
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
Allied Civil Work
C.
1.
2.
Supplying & laying true to line & level
Double charged Vitrified Tiles ( Bi-colour
Patten of approved brand ( e.g. Jhonson
Napples/ Antique Sapphire/ Equivalent) of
size 600 mm x 600 mm x 10 mm min. thick)
in floors, skirting, etc. set in 20 mm sand
cement mortar (1:4) and 2 mm thick
cement slurry using back side of tiles using
cement @ 2.91 KG. /M2 or using
polymerized adhesive (6 mm thick layer)
applied directly over finished laid after
application slurry using 1.75 KG of cement
per Sqm. below mortar only, joints grouted
with admixture of white cement and
colouring pigment to match with colour of
tiles / epoxy grout materials of approved
make as directed and removal of works
coating of top surface of tiles with warm
water and polishing the tiles using soft and
dry cloth up to mirror finish complete
including the cost of materials, labour and
all other incidental charges complete true
to the manufacturer's specifications and
direction.
(White
cement,
synthetic
adhesive and grout materials as required
are to be supplied by the contractor. If
necessary then the existing floor shall be
made in line and level with PCC (1:2:4) with
required thickness as per site condition to
fix the tile. The skirting of 100mm shall flush
to wall with proper plastering. The rate shall
include entire operations involved for this
work including removing the existing floor
finish. The MRP of the tile shall be in the
range between Rs 75 Rs 80 per Sqft at
depot, Kolkata. . Tile Sample has to be
approved before starting of the work.
Decorative Ceramic Tiles :P & fixing 400 x
400 mm Joint less Ceramic tile to the floor
laid of approved shade and design laid as
per design and pattern with cement mortar
( 1: 4) /water proof tile fixing adhesive
joints pointed with admixture of white
cement and colour pigment to match the
tile. Joints of the tiles are to be finished with
polymer based joint filler of matching
shade & approved quality as directed.
Colour. (Kajaria/Johnson/Somany/ Make).
(Minimum Base price of Tile Rs.50/-per Sqft),
Tile Sample has to be approved before
commencement of the work. Rate includes
all type of labour, material, tools & tackles
with dismantling the existing tile & making
good
SqMtr.
230.00
SqMtr.
24.60
29
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
3.
4.
5.
6.
Decorative Ceramic Wall Tiles: Providing
and fixing 12" x 8" approved plain shade of
ceramic tiles as per pattern for dado at
varying height including 4” boarder tile of
approved paten as directed by EIC using
CM 1:4 in proper line and level . The rate
shall include necessary backing material,
water proofing and joint filling compound
of the same shade as that of the ceramic
floor tiles (Kajaria/Johnson/Somany/orient
Make ). (Base price of Tile Rs.50/-per Sqft),
Tile Sample has to be approved before
starting of the work. Rate includes all type
of labour, material, tools & tackles with
dismantling the existing tile & making good
Granite Work of Counter Top Grade:
Providing and fixing 18mm thick polished
black color and shade of granite molding
at edges in kitchen plat form, vertical
faces, main entrance door sills etc and
other similar locations like front entrance
door including raising the platform by
about 100mm using cement concrete of
1:2:4 and making recess for floor spring of
door. The width of the granite slab is as per
site condition. This also includes preparing
the base surface, applying neat cement
slurry @ 2.75 kg. of cement per sq. mtr. of
area to receive the mortar bed, jointing
each slab with neat cement paste/ grout
with white cement mixed with pigment
(conforming, to IS:2114, Table-1) to match
the colour of the granite to IS:2114, Table-1)
to match the colour of the granite ( Black
Galaxy Granite tiles with base price of
Rs.200/- per Sqft. inclusive of tax ). Granite
Sample has to be approved before starting
of the work.
Paving Tiles - Providing & fixing paving
tiles 300 mm x 300mm of approved brand
(Johnson/Marbito/RAK/Orient
with base
mortar of 20mm laid in mix of 1:4 including
providing PCC of 1:2:4 with subgrade
preparation for making ramp preparation
as directed. Location: Main Entrance/ as
directed. Tile Sample has to be approved
before starting of the work.
Kota Stone In Staircase/Step: Providing and
laying machine cut chisel dressed kota
stone 18 mm thick of approved shade in
floor tread, landing, riser, skirting, dado over
and including a bed of cement mortar
including preparing the base surface,
applying neat cement slurry @ 2.75 Kg of
cement per Sq.M of area to receive the
mortar, providing neat cement slurry @
SqMtr
39.21
SqMtr.
4.50
SqMtr.
16.70
SqMtr.
0.00
30
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
7.
8.
9.
10.
4.4kg. of cement /Sq.M of area over the
mortar bed, jointing each slab with neat
cement paste/ grouting white cement and
pigment ( conforming to IS : 2114, Table-1,
matching the shade of slabs), machine
cutting of the slab edges square, true &
plumb
finishing,
grinding,
polishing,
finishing etc. all complete
Supplying, fitting & fixing Steel Rolling
shutter profile type with 18B.G. of approved
type, steel lathe section 75mm wide fitted
with coil wire spring to necessitate the
fitting of required roof C.I. Pulleys of heavy
type solid drawn seamless steel tube
complete with locking arrangement
specially built up side guide channels with
a coat of lead primer including fixing in
position with necessary civil work.
P & fixing Collapsible gate with 40 mm x
40mm 6mm tee as top and bottom guide
rail 20 mm x 10mm x 2mm vertical channels
100mm apart in fully stretched position
20mm x 5mm M.S. flats as collapsible
bracings properly riveted and washered
including 38 mm steel rollers including
locking arrangements fitted and fixed in
position with necessary civil work.
Aluminum Doors/Windows: Supplying and
fixing fully glazed anodized ( 25 micron)
/electrostatic powder coated (25 micron,
approved shade) aluminum
doors /
windows /partitions /ventilators including
frame & shutter with approved make
Hindalco/Jindal extruded tubular aluminum
sections as per the approved Drawing &
standard and 5.5 mm smoke glass fixed
with rubber lining and anodized/powder
coated aluminum beading including
fixing the frame to masonry/RCC by
counter sunk 100mm long brass screw
and dash fastener to M-15 grade
concrete in minimum 150mm x 150mm x
50mm sized block (for brick masonry
only)/RCC, finishing, making good of any
damaged work etc. all complete.
WALL PUTTY: Scrapping & removing old
scales & blisters& thereafter Providing and
applying powder form wall putty (interior
grade) of Birla/Asian/Berger or equivalent
as approved by Engineer in Charge on wall
surfaces including preparation of plastered
surfaces (making good of uneven plaster
with plaster of Paris mixed with water, sand
papering, cleaning). The thickness of putty
will be of Minimum 2 mm average. The
work shall be done to the satisfaction of
SqMtr
0.00
SqMtr
0.00
SqMtr
18.00
SqMtr.
340.00
31
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
11.
12.
13.
14.
15.
bank as per manufacturer’s specifications
as directed. Rate includes all the material,
labour, staging, tools & tackles including
necessary staging etc as complete in all
respect. Location: Banking hall area
SYNTHETIC ENAMEL PAINT : Providing and
painting on wooden, steel or plastered
surfaces with two coats of Synthetic
Enamel
paint of approved shade
&
brand over a coat of primer of
approved quality after sand papering
the old/new surface to give an even
uniform shade. Cost includes all type of
material, labour, tools & tackles etc complt.
Emulsion paint [roller finish]: Finishing the
wall with plastic emulsion paint of premium
quality of approved make conforming to
IS: 5411 of two or more coat over a coat of
primer to give a smooth and even shade. If
depression or hole is on wall, then same
shall be rectified by filling with putty,
applying a coat of primer and sand
papering etc. all complete. The work
should
executed
as
per
as
per
manufacturer’s recommendations
& as
directed by EIC. Cost includes all type of
material, labour, necessary, staging, tools
tackles, etc Complete.
Providing and Applying Textured Granite
type flakes wall coating consisting of twin
pack fine grade silica granules/ dry flakes
made of special grade of china clay/
granite type flakes of `Heritage' or
equivalent in approved shade and texture
; mixed in-situ with 100% acrylic polymer
bonding agent including cleaning and
preparation of surface consisting of two
coat of wall care putty Birla/Asian .All shall
be
as
per
manufacturer's
recommendations and specifications.int to
walls with necessary surface preparation.
Location: As per drawing
Finishing the wall with exterior paint of
Asian -Apex / equivalent of approved
shade in two or more coats .over a coat of
primer
including
necessary
surface
preparation with putty such as sand
papering, etc. complete all. Location: front
façade of building. Cost includes all type
of material, labour, necessary staging, tools
& tackles etc complete.
P & fixing 12mm thick PVC Flooring of
Armstrong/ Regent Winner Vinyl Make fixed
rubber based adhesive including leveling
and preparing the surface as required
inside the locker room as directed by Bank.
SqMtr.
96.00
SqMtr.
550.00
SqMtr.
20.00
SqMtr
106.00
SqMtr.
19.10
32
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
10.
11.
12.
13.
VERTICAL BLIND: Providing & fixing vista
levelor 100mm vertical blinds having top
rail 39mm x 34mm high with wall thickness
of 1.2mm having 25mm decorative insert.
Control unit shall be of Derlin Plastic runner
shall be moulded from Derlin exceed
0.5cm. The louvre fabric shall be polyester
viscose/ polyester yarn for stain resistance
dyed in last
colour with or without
protective coating on louvers with
chemical & soil repetancy and shall have
GI weight and steel/ spacing. The top rail
should be fixed on bracket of 14 SWG
galvanized spring steel, fixed firmly on walls
by nylon plug and screw as per approve
design and directions of the Bank.
Wash Basin: P/F/F Vitreous White China
Round Counter-top Wash-basin 470mm
dia. with 32mm dia. CP waste pipe with
standard parten , 15mm C.P. Pillar Cock,
C.P Bottle Trap, C.P. angular Cock and 15
mm dia 450mm long PVC Connector with
C.I. Bracket including painting of fittings &
brackets , cutting & making good to the
walls wherever required. Rate includes all
items mentioned here to compete in all
respect including the dismantling of
existing one & making good (Make:
Parryware/ Hindware/ Cera Model to be
approved before install.
Water Closet: P/F/F European Water Closet
(white) with 'P' or 'S' trap with solid white
plastic seat , C.P. hinges, C.I. bracket, with
PVC 10 litres capacity Slimline Classic
Cistern (White) along with angular Stopcock and 450mm long PVC Connector
along with C.P. Bolt & jointing materials ,
screws etc.all complete & include also
making good the floors, wherever required
,connecting to the existing pipeline. Rate
includes all mentioned item here including
the dismantling of same & making good.
Half Stall Type Urinal: P/F/F half stall white
Vitreous Urinal of size: 630 x 420 x 390mm
along with 15mm dia.C.P.Spreader, C.P.
dome shaped waste fittings to be foxed on
walls with brass chromium plated long set
screw, angular stop cock, connector and
32 mm dia. white PVC waste pipe with one
end expanded & coupling nut having
pessimistic flow with control vale with urinal
spreader, etc complete in all. Rate includes
all
items
stated
above
including
dismantling the existing urinals etc
complete as directed. Make: Parry
ware/Hind ware /Cera . this item also
SqMtr.
21.00
Set.
4.00
Set.
3.00
Set.
4.00
33
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
include the ladies type urinal .Model to
approve before installing Olympus no.6006.
14.
15.
16.
17.
18.
19.
20.
21.
Urinal Partition: Providing and fixing in
position Urinal Partion of size: 3'x 1'-6" of
approved Marble with chamfered and
machine polished edge fixed as per the
direction of the Bank. It shall be supported
on wall. Rate includes the profile cutting,
and polishing both sides and the exposed
edges of the granite.
Stainless Steel Sink: P/F/F Stainless Steel
counter top sink with single bowl of
Nirali(Glossy) /equivalent approved make,
integrated waste size-over all 610 x 460
mm. with a pair of C.I. bracket, fitted with
15mm dia. Brass C.P. sink cock with a pair
of C.I. bracket, fitted with 15mm dia. Brass
C.P. sink cock 600mm long with brass
coupling , cutting & making good the walls
wherever necessary. Rate includes all items
mentioned here including the dismantling
of existing one etc complete as directed.
Provide & fixing chromium plated liquid
soap container made of high density
polythene of approved shape & quality, fix
to the wall with brass screw etc. complete
as directed.
Providing fitting & fixing C.P.Commode
shower with 1 mtr. PVC tube of Allied
Jaquar Make/Any approved Equivalent.
Providing & fixing C.P brass towel rail of
600X25 mm size with two C.p brass
brackets fixed to wooden cleat.
Beveled Edge Mirror: P & F 600X450mm
beveled edge mirror of superior glass 6 mm
thick ( approved quality) complete with 6
mm thick masonite board ground fixed to
wooden cleats with C.p brass crews &
washer complete .
Provide & Fixing Toilet Paper holder of
standard Size recessed type white vitreous
china of approved quality with wooden
roller & spindle & counter sunk brass screws
& including cutting walls & mending the
damages good all complete.
Providing and fixing Heavy grade Bib
cocks/ stop cocks of spring loaded self
closing type conforming to IS: 781 including
making connections, cutting walls and
making good the same, removing the
existing cock etc. all complete.
a) 15mm dia CP Brass Bib cock.
b)15mm dia CP Brass Stop cock.
SqMtr.
2.60
Set.
1.00
No.
4.00
Set.
2.00
No.
2.00
No.
3.00
No.
3.00
No.
12.00
34
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.
Eligibility: Catergory-2(b)/ SBI/LHO/Kolkata
22.
23.
24.
25.
C.
Supplying & Fixing of G.I /PVC pipes, fittings
with accessories including plumbing fixture,
soil pipes, fitting with accessories as per
direction. Payment will be made on basic
of actual plus 20% towards handling,
labour, transportation, storing provide &
over head charges as per direction.(
photographs has to kept if necessary for
post facto-checking)
1st Brick Work in Superstructure: Providing
and laying Brick Masonry with 1st class brick
confirming to IS 12894 in cement mortar
1:5(1 Cement : 5 Sand) in one or more brick
thickness and in any shape at all height
above plinth level including the cost of
materials, labour, scaffolding/
staging,
sampling & testing, soaking of bricks,
cutting and laying of bricks, providing
recesses, making openings of any shape &
size, finishing the joints flush below ground
level and raking out the joints above
ground level, sealing the gap between
masonry
and
soffit
of
beam/slab,
embedding the fittings & fixtures, curing,
etc. all complete as directed.
Cement plaster of 16mm thickness in
cement mortar 1:5 including mixing,
transporting, placing and curing etc
complete at all level
Site Development: Shifting/Site Cleaning of
the premises during opening of the branch
including removal of all debrises & un used
material & disposal of same (all material
even if unused by other contactor) as per
local Municipal Norm. The cleaning
operation can be done three to Four times
as per site condition as instructed by bank.
Contractor Should quote a lump sum
Amount for the aforesaid work.
Total Allied Civil Work Value (Rs.)
P.S.
1.00
SqMtr.
11.40
SqMtr.
40.00
L.S
1.00
24,000.00
(Both Words & In Figure)
D.
Grand Total Tender Amount (A+B+C) Rs.
(Both Words & In Figure)
Signature of the tenderer with seal
Date:
Place:
35
Tender for Interior Furnishing & Allied Civil Work at Nagar Branch, S.B.I. (UNDER R.B.O-I)
Signature Of Contractor With Seal.