Download Report

PRODUCT BROCHURE
RMD Australia
Minima
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Desalination Plant in Adelaide
Product Overview
Faster
Efficient tie hole positioning reduces the number of ties
required, lowering costs and construction times
Modular components reduces the time to assemble and
dismantle the panels
Minima has an extensive range of accessories that enable
quick erection and stripping of the system
Safer
Few loose fittings make it easy and convenient to connect
the panels by using Minima clamps - no special tools are
required
Minima is a robust, wall formwork panel system for concrete
loads of up to 60kPa
Easier
Many of Minima's panels are lighterweight (only 30kg/m2),
which means most panels are easily set by hand, minimising
the need for cranage, reducing costs and skilled labour
requirements
Panels can be clamped together and up to 25m2 can be
lifted by crane if required, increasing the productivity of the
system
Minima inner corners have a 2 degree stripping clearance,
which allows panels to be easily removed once curing has
taken place
Clamps are easily tightened, prolonging their working life
and reducing labour requirements
Minima has many different panel sizes ensuring that virtually
any wall can be erected. Furthermore, composite panels are
available for longer life and a better finish
1
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Water Corporation, WA
Applications
With 18 panel sizes, including 2.7 x 2.4m, available, Minima can easily be
assembled into most layout combinations and pour heights and because many
of the panels are lighter weight than similar systems, they can be set by hand,
providing greater productivity.
Walls
Columns
Buttresses
Culverts
Abutments and piers
Service cores
Basements
Tanks
Foundations
Pile caps
2
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Amco Bottle Factory, SA
Wagga Wagga Sewerage Treatment Plant
Features & Benefits
Lightweight panels
Panels are only 30kg/m2 so most of them are easily set by
hand, minimizing the need for cranage, reducing costs and
skilled labour requirements.
Easy stripping
Once sufficient curing has taken place Minima inner corners
can easily be removed because of their 2 degree stripping
clearance.
Simple clamping system
The Minima clamps are easy to use, which reduces the time
needed to complete the project.
Versatile
Available in 18 panel sizes, including a panel that's 2.7 x
2.4m, virtually any configuration can be erected.
Increased productivity
The productivity of Minima is improved when its clamped
together (up to 25m2) and lifted by crane to the next pouring
location.
Clever design
Tie positions support 1.21m2 of formwork when using 2.7 x
0.9m panel assemblies, reducing the number of ties
required, lowering costs and construction times.
Panels moved whilst clamped
3
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Airport Link, Brisbane
Cemex Batch Plant
In Detail
System
Modular components
Few loose fittings
Reduces the time to
assemble and dismantle the
system.
It is easy to connect the
panels by using the Minima
clamps, no special tools are
required.
High concrete pressure
Handset formwork
Minima is suitable for
concrete pressures up to
60kN/m2 for single tie and
55kN/m2 for height extended
forms. Minimises the use of
form ties, reducing the
number of components
required.
Most of Minima's panels can
be set without a crane,
substantially reducing cost.
Hot-dip galvanised
frame
Wide range of panel
sizes
Increase panel's life cycle
and reduce maintenance
costs.
With three different height
sizes and five different width
sizes, with 18 different panel
sizes overall, including 2.7 x
2.4m, Minima can be
adopted to almost every
project.
4
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Transgrid, Newcastle
Happy Valley Wave Wall
In Detail
Innovative Components
The Minima multi
purpose panel
Minima external corner
clamp
With horizontal tie holes at
50mm intervals, Minima can
be used in special
applications such as wall
offsets, corners with oblique
angles and pilaster.
Can join two standard panels
together and skip the
requirement of using an
external corner panel.
Minima adjustable
clamp
Minima hinge corner
Can be used in a wide range
of internal and external
angles.
Joins panels and fillers
together and allows up to
150mm of infill adjustment.
5
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Project References
PROJECT
PROJECT
Lynwood Quarry Project Minima
Pluto LNG Project
REGION
Australia & New Zealand
REGION
Australia & New Zealand
STRUCTURES
STRUCTURES
Industrial, Roads, Utilities
Industrial, Mining, Utilities
PROJECT
PROJECT
North East Waste Water
Treatment Works
Hitchin Viaduct
REGION
Europe
REGION
Africa
STRUCTURES
STRUCTURES
Bridges, Rail
Water Works
6
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Components
Plywood Panels 1.2m
Code
Description
Weight
MMX21230 Plywood Panels 1.2m x 0.3m
19.5kg
MMX21245 Plywood Panels 1.2m x 0.45m
24.8kg
MMX21260 Plywood Panels 1.2m x 0.6m
29.6kg
MMX21275 Plywood Panels 1.2m x 0.75m
34.5kg
MMX21290 Plywood Panels 1.2m x 0.9m
42.5kg
There are 5 panel widths for this height, ranging from 0.3m to
0.9m.
Composite Panels 1.2m
Code
Description
Weight
MMX71230 Minima Panel 1.2 x 0.3m
20.5kg
MMX71245 Minima Panel 1.2 x 0.45m
26.2kg
MMX71260 Minima Panel 1.2 x 0.6m
30.2kg
MMX71275 Minima Panel 1.2 x 0.75m
36.9kg
MMX71290 Minima Panel 1.2 x 0.9m
41.8kg
Alkus Composite faced Panels for greater durability
Plywood Panels 1.5m
Code
Description
Weight
MMX21530 Plywood Panels 1.5m x 0.3m
24.6kg
MMX21545 Plywood Panels 1.5m x 0.45m
30.3kg
MMX21560 Plywood Panels 1.5m x 0.6m
35.9kg
MMX21575 Plywood Panels 1.5m x 0.75m
41.7kg
MMX21590 Plywood Panels 1.5m x 0.9m
47.4kg
There are 5 panel widths for this height, ranging from 0.3m to
0.9m wide.
7
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Components
Composite Panels 1.5m
Code
Description
Weight
MMX71530 Minima Composite Panel 1.5 x 0.3m
25.1kg
MMX71545 Minima Composite Panel 1.5 x 0.45m
31.0kg
MMX71560 Minima Composite Panel 1.5 x 0.6m
36.8kg
MMX71575 Minima Composite Panel 1.5 x 0.75m
42.8kg
MMX71590 Minima Composite Panel 1.5 x 0.9m
51.8kg
Alkus Composite faced Panels for greater durability. There are 5
panel widths for this height, ranging from 0.3 to 0.9m wide.
Plywood Panel 2.7m
Code
Description
Weight
MMX22730 Plywood Panel 2.7 x 0.3m
43.1kg
MMX22745 Plywood Panel 2.7 x 0.45m
52.7kg
MMX22760 Plywood Panel 2.7 x 0.6m
62.3kg
MMX22775 Plywood Panel 2.7 x 0.75m
72.0kg
MMX22790 Plywood Panel 2.7 x 0.9m
89.5kg
MMX22724 Plywood Panel 2.7 x 2.4m
283.7kg
There are 6 panels widths for this height, ranging from 0.3m to
2.4m. The last panel is a huge 2.7 x 2.4m and weighs 283.7kg it's a highly capable panel for large projects.
Composite Panels 2.7m
Code
Description
Weight
MMX72730 Minima Panel 2.7 x 0.3m
43.9kg
MMX72745 Minima Panel 2.7 x 0.45m
53.9kg
MMX72760 Minima Panel 2.7 x 0.6m
63.9kg
MMX72765 Minima Panel 2.7 x 0.65m
67.2kg
MMX72775 Minima Panel 2.7 x 0.75m
73.9kg
MMX72790 Minima Panel 2.7 x 0.9m
89.5kg
Alkus Composite faced Panels for greater durability. There are 6
panel widths for this height ranging from 0.3m to 0.9m wide.
8
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Components
Multi Purpose Plywood
Panels
Code
Description
Weight
MMX41270 Minima MP Panel 1.2 x 0.7m
37.0kg
MMX41570 Minima MP Panel 1.5 x 0.7m
44.0kg
MMX42770 Minima MP Panel 2.7 x 0.7m
70.8kg
These panels have a continuous horizontal 5cm tie hole, used in
wall offsets, corners with oblique angles and pilaster strips.
Particularly suitable as formwork for concrete columns up to an
edge-to-edge width of 55cm.
Composite Multi
Purpose Panel
Code
Description
Weight
MMX61270 Minima Composite MP Panel 1.2 x 0.7m
37.8kg
MMX61570 Minima Composite MP Panel 1.5 x 0.7m
45.0kg
MMX62770 Minima Composite MP Panel 2.7 x 0.7m
72.6kg
Alkus Composite used to face the panels, improving their
durability. These panels have a continous horizontal 5cm tie hole,
used in wall offsets, corners with oblique angles and pilaster
strips. Particularly suitable as formwork for concrete columns up
to an edge-to-edge width of 55cm.
Minima Clamp
Code
Description
MMX10028 Minima Clamp
Weight
3.4kg
The Minima clamp is only used on vertical joints, located over the
panel rib.
9
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Components
Adjustable Alignment
Clamp
Code
Description
MMX10002 Minima Adjustable Alignment Clamp
Minima Adjustable
Clamp
Code
Description
MMX10002 Minima Adjustable Clamp
Weight
5.18kg
Weight
3.4kg
Permits length adjustment up to 15cm at maximum and connects
panels with a tension-and comptression-resistant, flush and
aligned joint.
Alignment Panels
Code
Description
Weight
MMX10005 Minima Alignment Prop - Medium
22.9kg
MMX10017 Minima Alignment Prop - Short
12.7kg
MMX10032 Minima Propping Bracket
1.87kg
Used for stabilising and aligning the wallform.
10
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Components
Minima Inner Corners
Code
Description
Weight
MMX31230 Minima Inner Corner 1.2m
41.4kg
MMX31570 Minima Inner Corner 1.5m
51.0kg
MMX32730 Minima Inner Corner 2.7m
87.2kg
The 90 degrees inner corner with the patented 2 degrees
clearance of easing. After unlocking the corner stiffeners, the
element becomes movable and can be effortlessly removed from
the concrete.
Minima Hinged Corners
Code
Description
Weight
MMX51230 Minima Hinged Corner 1.2 x 0.3m
33.8kg
MMX51515 Minima Hinged Corner 1.5 x 0.15m
27.8kg
MMX51530 Minima Hinged Corner 1.5 x 0.3m
41.3kg
MMX52715 Minima Hinged Corner 2.7 x 0.15m
49.2kg
MMX52730 Minima Hinged Corner 2.7 x 0.3m
71.7kg
There are three different heights and two different widths of hinge
corners. Width 150mm hinge corner can be used as an outer
corner for obtuse angles from 90-180 degrees. Width 300mm
hinge corner is suitable for angles from 60-150 degrees.
Minima Access Bracket
Code
Description
MMX10006 Minima Access Bracket
11
Weight
13.3kg
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Components
Minima Waler Plate
Minima Edge Tie
Bearing
Code
Description
BTA11012 Flat Bracket 130 x 130 x 12mm
1.5kg
BTA11010 Flat Bracket 130 x 130 x 10mm
1.3kg
BTA11008 Flat Bracket 130 x 130 x 8mm
0.8kg
BTX10001 Bar Tie Wing Nut 15mm
0.3kg
Code
Description
MMX10023 Minima Edge Tie Bearing
Plates
Weight
Code
Description
MMX10018 Minima Plate 8/8
Weight
2.4kg
Weight
2.6kg
MMX10030 Minima Plate Washer
0.51kg
BNX20022
75 x 75 x 6 x 12dia plate washer
0.05kg
MXX10012
Ground Plate 5 x 12
0.67kg
MXX10043
Maxima Tie Plate 15
1.1kg
12
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Components
Minima Accessories Nuts & Bolts
Code
Description
BTA10004
Bar Tie 15mm Cast Full Nut
MMX10010 Minima Waler Tie 300
Weight
0.21
0.80g
MMX10012 Minima Tension Bolt 190
0.90kg
MMA10015 Minima MP Bolt
0.59kg
MMA10010 Minima MP Nut
0.46kg
SSX10044
Superslim Connecting Pin
0.23kg
SSA
Soperslim Connecting Clip
0.01kg
Other sizes are also available.
13
Minima A robust, versatile, modular formwork panel system.
PRODUCT BROCHURE
Services
Our service sets RMD Australia apart...
With over 60 years of experience in the construction industry RMD Australia
understand the many and varied challenges that our customers face, whatever
the size of your project. Whilst our product range provides us with the capability
of supporting your project, it is our people that will make the difference.
Sales Support
Technical Expertise
Sales support you throughout the project, they have the
knowledge to advise effective solutions based on RMD's safe
and productive products with the view to reducing costs.
Every project, large or small, requires a unique design. Our
highly skilled team of Engineers will firstly gain a thorough
understanding of your specific requirements, and then provide
a solution designed to more than meet them in terms of speed
and accuracy. With a view to cost effectiveness.
Engineered Drawings
Engineering is available, in each state and at our Head Office.
They provide detailed drawings that clearly show the most
efficient and safest way that the project should be undertaken.
Customer Service
Safety
RMD Australia prides itself on the inherent safety of our
product range and the solutions that we design. Safety is a
major criteria for all of our product range and our Sales Team.
RMD provide a wide range of customer services to suit your
special requirements, from training to support items.
14
PRODUCT BROCHURE
Minima A robust, versatile, modular formwork panel system.
Contacts
RMD AUSTRALIA
HEAD OFFICE
ADELAIDE
BRISBANE
PO Box 169, 66 Bennet Avenue,
Melrose Park, SA 5039
Tel: +61 (0) 8 8179 8200
Fax: +61 (0) 8 8179 8201
Email: [email protected]
PO Box 169, 66 Bennet Avenue,
Melrose Park, SA 5039
Tel: +61 (0) 8179 8240
Fax: +61 (0) 8179 8241
Email: [email protected]
PO Box 55, 163 Crockford Street,
Nundah, QLD 4012
Tel: +61 (07) 3634 2700
Fax: +61 (07) 3266 1054
Email: [email protected]
CAIRNS
DARWIN
HOBART
PO Box 399, 78 - 80 Ishmael Road,
Earlville, QLD 4870
Tel: +61 (07) 4054 5149
Fax: +61 (07) 4054 5198
Email: [email protected]
3/32 Bishop Street, Stuart Park, NT
0820 (PO Box 37639 Winnellie, NT
0821)
Tel: +61 (08) 8941 6777
Fax: +61 (08) 8942 2577
Email: rmd. [email protected]
5 Lampton Avenue, Derwent Park,
TAS 7009 (PO Box 246, Moonah,
TAS 7009)
Tel: +61 (03) 6272 2566 or +61 (03) 6272 5073
Fax: +61 (03) 6272 2611
Email: [email protected]
LAUNCESTON
MACKAY
MAROOCHYDORE
9 Churchill Park Drive, Ivernay, TAS
7248 (PO Box 739, Launceston, TAS
7250)
Tel: +61 (03) 6331 3751 or +61 (03) 6334 2566
Fax: +61 (03) 6331 9751
Email: [email protected]
Block 8D, Graeme Heggie Street,
Mackay, QLD 4740
Tel: +61 (07) 4955 1228 / +61 (07)4955 1844
Fax: +61 (07) 4955 3052
Email: [email protected]
32 Page Street, Kunda, QLD 4556
(PO Box 584, Maroochydore, QLD
4558)
Tel: +61 (07) 5445 3244
Fax: +61 (07) 5445 4822
Email: [email protected]
MELBOURNE
NAVAL BASE
NEWCASTLE
PO Box 3224, Unit 5/80 Camp Road,
Broadmeadows, VIC 3047
Tel: +61 (03) 8301 7200
Fax: +61 (03) 8301 9761
Email: [email protected]
43 Dooley Street, Naval Base,
WA6165 (PO Box 386, Kwinana, WA
6167)
Tel: +61 (08) 9410 2777
Fax: +61 (08) 9410 2779
Email: [email protected]
3 Riverside Drive, Mayfield West,
NSW 2304 (PO Box 53, Wickham,
NSW 2293)
Tel: +61 (02) 4967 5888
Fax: +61 (02) 4967 5788
Email: [email protected]
PERTH
ROCKHAMPTON
SYDNEY
6 Energy Street, Malaga, WA 6062
(PO Box 3203, Malaga DC, WA
6945)
Tel: +61 (08) 9207 9200
Fax: +61 (08) 9207 9201
Email: [email protected]
Corner McLaughlin and Wade
Streets, North Rockhampton, QLD
4701 (PO Box 5922, Central
Queensland MC, QLD 4702)
Tel: +61 (07) 4936 3955
Fax: +61 (07) 4936 3966
Email: [email protected]
25 - 39 Chadderton Street, Canley
Vale, NSW 2166 (PO Box 3007,
Lansvale, NSW 2166)
Tel: +61 (02) 8717 3700
Fax: +61 (02) 9728 6399
Email: [email protected]
TOWNSVILLE
11 Whitehouse Street, Garbutt, QLD
4814 (PO Box 5367 MC, Townsville,
QLD 4810)
Tel: +61 (07) 4779 0544
Fax: +61 (07) 4725 1364
Email: [email protected]
www.rmdkwikform.com
Our policy is one of continuous improvement and we reserve the right to change, alter or
modify any detail, design, weight, dimension or code without prior notice beign given.
The arrangements of equipment shown in photographs may have been assembled by
others and therefore not reflect current best working practices or legislation requirements.
A member of Interserve Plc.