How to Identify My Digital Video Product If you do not know what model of digital video product you have, there are 4 ways to determine the model name. The models available for an upgrade are listed below. Note: Models such as DSR2000e, DSR1000eZ, SymNet, SymDec1 and SymDec4 each have a single main firmware file for that particular model. There is no need to determine a specific model name that includes camera inputs. All 2nd generation DSR2000e and DSR1000eZ units use the same main firmware file. DVMRe-4CT DVMRe-PRO4 DVMRe-4eZT DVMRe-4CT II StoreSafe StoreSafe Pro II SymDec1 (VSR) Digi-4 DVMRe-10CT DVMRe-PRO10 DVMRe-10eZT DVMRe-10CT II StoreSafe Advanced DSR2000e SymDec4 (VSR-4) DVMRe-16CT DVMRe-PRO16 DVMRe-16eZT DVMRe-16CT II StoreSafe Pro DSR1000eZ SymNet 1. Look at the manufacturing sticker on the bottom of the unit and note the model. For Digi-4 the manufacturing sticker is on the rear panel of the recorder. The examples below show: SDVR-4A-40 and VSR-300. How_to_Identify_My_Digital_Product.doc Page 1 of 2 GE Security 2. Look in the System View or Operator menu and select “About”. For DVMRe-CT, DVMRE-CT II or DVMRe PRO: For DVMRe-eZT and all StoreSafe models. The StoreSafe models do not show if it is a 4, 10 or 16 channel unit. That you can determine by looking at the front panel camera buttons. For SymDec1, SymDec4 and DSR. 3. The model name is also printed on the front panel. If the model name is generic such as DVMRe Triplex you will need to use one of the above methods to determine the proper model. 4. Use Internet Explorer to connect to the unit and view the home page. You can also look at the Info, Properties or About page. How_to_Identify_My_Digital_Product.doc Page 2 of 2