EasyLap
PANEL
The easy way to
create a textured look
EasyLap™ Panel is a strong fibre cement sheet with a shiplap vertical joint. Finished on site
with roll-on acrylic texture it creates a textured look with a subtle vertical joint. EasyLap Panel
offers a cost effective alternative to traditional texturing methods and is fast to install with large
format panel and no requirements for vertical set joint and control joint.
EasyLap Panel is resistant to fire, rot, damage from moisture and delivers a versatile cladding
option for modern composite design.
Ask James Hardie™
I
Call 0800 808 868
I
jameshardie.co.nz
EasyLap™ Panel — Sheet sizes
Product Code
Length
Width
Thickness
mm
mm
mm
404764
2450
1200
9mm
404765
2750
1200
9mm
404763
3000
1200
9mm
All dimensions provided are approximate only and subject to manufacturing tolerances.
Shiplap joint profile
EasyLap™ Panel - Accessories supplied by James Hardie
Accessories
Description
Quantity/Size (approx)
Code
19 x 70mm, 2450mm long
403870
CLD Structural Cavity Batten
19mm thick fibre cement cavity batten installed over James Hardie
rigid air barrier or a building underlay. EasyLap Panels are fixed to
the battens.
JH 9mm Panel Aluminium External Box Corner
A box corner mould to form the external joints. 9mm etch primed.
JH 9mm Panel Aluminium Horizontal ‘h’ Mould
A horizontal flashing to flash the horizontal joints. 9mm etch primed.
Aluminium ‘h’ Mould Jointer
A jointer to cover the butt joint of ‘h’ mould.
uPVC Vent Strip
Used to provide protection from vermin entering cavity space.
2450mm long
304509
2750mm long
304510
3000mm long
305150
4000mm long
305808
3000mm long
304508
100mm long
304512
3000mm long
302490
CLD Batten Corner Flashing Aluminium
304652
Used at internal corner sealant joints at floor joist level.
Tools
HardieBlade™ Saw Blade
Diamond tip 184mm diameter fibre cement circular saw blade.
Spacers not included.
Each
300660
EasyLap™ Panel - Accessories not supplied by James Hardie
Dulux® AcraTex® Sedona™ roll on acrylic texture
Dulux® AcraTex® AcraSand™ roll on acrylic texture
Dulux® AcraTex® AcraShield® Advance topcoat (optional)
EasyLap™ Panel must be installed and maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation.
© 2015 James Hardie New Zealand. TM and ® denote a trademark or registered mark owned by James Hardie Technology Limited.
Dulux, AcraTex and AcraShield are registered trade marks and AcraSand and Sedona are trade marks of DuluxGroup (Australia) Pty Ltd.
EasyLap
PANEL