appliances

appliances
WaterWatch
Floor Alarm
Good for inside FloodRings,
crawl spaces on top of
CleanSpace, or anywhere a
leak would be most likely. Same
as WaterWatch alarm (found
in the Basements section), but
without the probe.
FloodChek Hoses
Item #02402
WaterWatch Floor Alarm
$39.00 each
Why Choose Floodchek Over Traditional Rubber or Steel Enclosed
Rubber Hoses? Standard rubber hoses, especially the hot water hose,
hardens, becomes brittle, and may fail unpredictably depending upon
quality of hose and frequency of use of the machine. Useful service life
is 5 to 7 years for a consumer grade hose. The greater the bend in the
hose, the shorter the hose will last. Also hose life varies with the water’s
chemical composition, ambient water pressure, and how the hoses
are installed.
Standard rubber hoses look strong until about a half hour before they
fail as most failures begin internally.
Standard brand new rubber hoses can almost totally sever if they rupture under pressure. Washer hose failure (at an average 70 lbs of
pressure) can discharge a flood of up to 650 gallons of water per
hour.
Steel braided hoses reduce the problem of razoring but result in a
worse problem. Manufacturers use a very aggressive crimp and a relatively thin rubber tube to secure the rubber tube and steel braid to the
swivel. When hoses are bent and flexed, they fail at the crimp point.
Item #07290
FloodChek Hoses – Set of 2
$49.00
Remote WaterWatch
Alarms
These units can be used for
a remote buzzer upstairs or a
centrally monitored alarm system.
Item #02418S
WaterWatch Alarm Remote Kit w/
Floor Alarm
$82.00 each
Includes alarm, 50 ft. cord and remote
box.
877-479-3637 x7021 / [email protected]
Revision 1-13
1
appliances
Lower
Upper
SaniDryXP
Upright Model
SaniDry Duct Kits
The SaniDr y XP Basement Air
System effectively dries the air in
any basement, making it smell
better and reducing the chance
for mold growth. In addition, the
SaniDry unit filters particles out of
the air including mold spores, and
dust. The unit's powerful blower
moves air around the basement
to dry the entire space.
To locate the SaniDry in an area
other than the space you are
drying, you use this duct kit to draw
moist air through a grill in the finished
wall, through a duct, and into the
top intake of the SaniDry unit. Kit
includes duct hood for top of unit, 8
ft. of 8" flex duct, a sheet metal boot,
and 8" by 16" grill for the finished wall.
Item #07000
SaniDryXP – upright model
$954.00 each
17 ½””l x 19 ¾”w x 36 ½”h
Covers maximum of 3000 sq. ft. • ½”
diameter drain tube.
• Merv 11 Filter
• Digital Display - Easy to Program
• Energy Star Rated
• Removes up to 110 pints of water a day
• 2010 compliant R410A refrigerant
Warranty - 30 months from date of
manufacture. If you have a problem we
send you the parts for free – or – you
pay for shipping back to CT, we fix it, no
hassles, and we pay for shipping it back
to you!
Condensate
Pump Kit
When you can't drain the SaniDry
by gravity, use this drain kit. It
includes a condensate pump
that screws into the back of the
SaniDry unit via pre-drilled holes
in the SaniDr y cabinet, and
25 feet of clear tubing for the
condensate pump discharge,
and hose clamp. Simply stick
the SaniDry drain hose into the
condensate pump, and plug it in.
Item #07050
$52.05 each
Item #07020
SaniDry Lower Duct Kit – 4 pieces
$45.00 each
Item #07040
SaniDry Upper Duct Kit – 4 pieces
$70.00 each
Remote
Humidity Sensor
Item #07003S
SaniDry XP Remote Humidity
Sensor
$55.00 each
For use with XP unit ONLY.
877-479-3637 x7021 / [email protected]
Revision 1-13
2
appliances
SaniDry CX
Model CX-109
SaniDry Mini
The SaniDry CX effectively dries
out the air in any crawl space
or basement, making it smell
better and reducing the chance
for mold growth. In addition, the
SaniDry CX unit filters particles out
of the air including mold spores,
and dust. The unit's powerful
blower moves air all around the
crawl space or basement to dry
the entire area.
The SaniDry Mini is a compact
unit only for crawl spaces that
are too small to fit the SaniDry CX.
It is Energy Star rated and at 12
inches tall can be installed with
the four standard leveling legs. Also
available is an optional Hang Kit.
Item #07045
$758.00 each
37¼”l x 20”w x 15”h
Item #07005
$715.00 each
21”l x 21”w x 12”h
Covers maximum of 1000 sq. ft. • 5/8” diameter of drain tube.
Item #07006
Hang Kit for SaniDry Mini
$34.00 each
Item #07013K
Duct Kit for SaniDry Mini
*2 Collars, Duct Flex Hose not included.
$44.99 each
Replacement Filters
Item #07080
SaniDry Upright Gray Foam Pre-Filter
$6.50 each
Item #07090
SaniDry Upright Main Cardboard
Pleated Filter
$8.70 each - 12 per case
Item #07100
SaniDry Upright Carbon Filter
$16.00 each – 12 per case
Item #07085
SaniDry CSB Pre-Filter
$6.00 each
Item #07095
SaniDry CSB Pleated Filter
$8.50 each – 12 per case
Item #07101
SaniDry CSB Carbon Filter
$16.40 each
Item #07102
SaniDry Mini Pre-Filter
$12.00 each – 12 per case
Item #07103
SaniDry Mini Pleated Filter
$12.00 each – 12 per case
Item #07104
SaniDry Mini Carbon Filter
$14.00 each
Item #07018
Exhaust ring
$20.00 each
Item #07022
Duct flex hose (box of 25’)
$37.50/box
Item #07081
SaniDry XP Pre-filter
$10.00 each
(Duct Kit for SaniDry Mini.)
Item #07022
Duct flex hose (box of 25’)
$37.50/box
Item #07105
SaniDry CX Pre-filter
$10.00 each
Item #07106
SaniDry CX Pleated Filter
$15.00 each
Item #07107
SaniDry CX Carbon Filter
$16.00 each
877-479-3637 x7021 / [email protected]
Revision 1-13
3