1. No category

BC7-12 Beam Clamp
2000 lb. WLL
BEAM-WARE
CHANNEL STYLE WITH ONE SUSPENSION POINT
ONE TON BEAM CLAMP
Standard, pre-engineered channel style beam clamps anchor to a building’s
structure and offer a safe and predictable method of rigging grids, clusters,
arrays and other objects from overhead. This channel style beam clamp is
adjustable and mounts flush underneath the building’s I-Beam’s flanges. It
comes equipped with a centrally located rigging point for suspending objects
from wire rope, rigging chain, spansets, etc.
Use one of two channel style beam clamps
to provide a load rated overhead rigging
point from structural I-Beams with flange
widths ranging between 3” 12”(305mm). This
beam clamp model provides a fast, easy
and safe way to rig direct loads, bridles and
hitches from overhead and a hand wrench is
all that is required to secure this clamp. The
beam flanges must be parallel to the floor to
achieve the stated working loads.
KEY FEATURES:
SPECIFICATIONS:
PACKAGE CONTENTS:
► Single load-rated center hang point
Material: All Steel Components
1 pc
► Provides safe load-rated hang point to 45° off center.
Width: (BC7-12) 7” to 12” / 178mm to 305mm
2 pcs Locking Angle Plate
Finish: Powder Coat
2 pcs Flat Washer, 5/8”
Color: Black
2 pcs Nyloc Nut, 5/8-11
► Two models secure to beam flanges ranging
from 7” - 12” / 178mm to 305mm
Beam Clamp Channel
WLL: 2000 lb / 908 Kg WLL (VERTICAL)
Design Factor: 4:1
OPTIONAL ACCESSORIES:
45 DEG. WL: 825 lb / 375 Kg
► See Wire Rope datasheets
DO NOT EXCEED 45° off hang points
► See Rigging components datasheets
DIMENSIONS:
6.00
Top View
6.00
2.50
2.00 2.60
Side View
16.00
2.50
.25-.50
2.00 2.60
End View
16.00
7.00 - 12.00
6.00
2.50
7.00 - 12.00
.25-.50
1.00
2.00 2.60
1.00
5.15
3.38
5.15
3.38
16.00
.60
7.00 - 12.00
1.38
.60
1.38
.60-
.63
.60-
.63
.25-.50
1.00
5.15
3.38
Adaptive Technologies .60
Group
1.38
1635 E. Burnett Street | Signal
Hill, CA 90755 USA
Ph: 562.424.1100 | Fax: 562.424.3520
www.adapttechgroup.com
.60-
.63
ALWAYS INSTALL SAFETY CABLES
WARNING: Mounting and/or suspension loudspeakers requires experienced professionals. Improperly installed loudspeakers can result in property damage, personal injury and/or liability to the installing contractor.