Spooky Alley
halloween parade collection™
Spooky Alley
FINISHED QUILT SIZE 46½” x 46½”
Measurements include ¼” seam allowance.
Sew with right sides together unless otherwise stated.
Please check our website www.rileyblakedesigns.com for any revisions
before starting this project. This pattern requires a basic knowledge
of quilting technique and terminology. The quilt and block diagrams
portrayed are virtual images. The layout and look of your project may
differ when using actual fabric.
FABRIC REQUIREMENTS
1 multi panel (P3961 Multi)
1 Halloween Parade Rolie Polie (RP-3960-21)
½ yard (50 cm) black star (C3966 Black)
Binding 5/8 yard (60 cm)
Backing 3 yards (2.75 m)
CUTTING REQUIREMENTS
Please read instructions first before cutting. Seam allowances vary so
measure through the center of the quilt before cutting border pieces.
Panel
Cut 1 rectangle 34” tall x 35½” wide
Rolie Polie
From the green main 2½” strip cut 1 rectangle 2½” x 8 7/8” and 2
rectangles 2½” x 9”
From the green candy 2½” strip cut 1 rectangle 2½” x 9¼” and 1 rectangle
2½” x 9”
From the purple cobwebs 2½” strip cut 1 rectangle 2½” x 9¼” and 2
rectangles 2½” x 9”
From the green corn 2½” strip cut 1 rectangle 2½” x 8 7/8” and 1 rectangle
2½” x 9”
From the gray main 2½” strip cut 2 rectangles 2½” x 8 7/8” and 1 rectangle
2½” x 9”
From the black candy 2½” strip cut 1 rectangle 2½” x 8 7/8” and 2
rectangles 2½” x 9”
From the gray cobwebs 2½” strip cut 2 rectangles 2½” x 9¼” and 2
rectangles 2½” x 9”
From the multi stripe 2½” strip cut 1 rectangle 2½” x 9¼” and 2 rectangles
2½” x 9”
From the black dot 2½” strip cut 8 squares 2½” x 2½”
From the black corn 2½” strip cut 2 rectangles 2½” x 9”
From the orange main 2½” strip cut 1 rectangle 2½” x 9¼” and 2 rectangles
2½” x 9”
From the white candy 2½” strip cut 2 rectangles 2½” x 8 7/8”, 1 rectangle
2½” x 9¼”, and 1 rectangle 2½” x 9”
From the orange cobwebs 2½” strip cut 1 rectangle 2½” x 8 7/8” and 1
rectangle 2½” x 9”
From the orange corn 2½” strip cut 1 rectangle 2½” x 9¼” and 1 rectangle
2½” x 9”
Borders
Seam allowances vary so measure through the center of the quilt before
cutting border pieces. Sew border strips together end to end if necessary
to get the length needed. Sew side borders first.
Border 1
Refer to the quilt photo for placement of assorted print 2½” x 8 7/8”
rectangles. Sew 4 assorted print 2½” x 8 7/8” rectangles together for the
right side border. Sew 4 assorted print 2½” x 8 7/8” rectangles together
for the left side border. Sew the right and left side borders to the quilt
center.
Refer to the quilt photo for placement of assorted print 2½” x 9¼”
rectangles. Sew 4 assorted print 2½” x 9¼” rectangles together for the
top border. Sew 4 assorted print 2½” x 9¼” rectangles together for the
bottom border. Sew a black dot 2½” square to each end of the top and
bottom borders. Sew the top and bottom borders to the quilt center.
Border 2
Side borders should be 2¼” x 38”. Top and bottom borders should be
3” x 43”.
Border 3
Refer to the quilt photo for placement of assorted print 2½” x 9”
rectangles. Sew 5 assorted print 2½” x 9” rectangles together for the
right side border. Sew 5 assorted print 2½” x 9” rectangles together for
the left side border. Sew the right and left side borders to the quilt center.
Sew 5 assorted print 2½” x 9” rectangles together for the top border.
Sew 5 assorted print 2½” x 9” rectangles together for the bottom border.
Sew a black dot 2½” square to each end of the top and bottom borders.
Sew the top and bottom borders to the quilt center.
Finish quilt by layering the quilt top, batting, and back. Bind with your
favorite Riley Blake fabric from the Halloween Parade Collection. Have
fun with your colors and enjoy the journey of making your quilt.
Black Star
Cut 2 strips 2¼” x WOF for Border 2
Cut 3 strips 3” x WOF for Border 2
QUILT ASSEMBLY
Refer to the quilt photo for placement of fabrics.
©2014 Riley Blake Designs